Detailed Tips

# 3 Detailed Tips

Contents of this section

## 3.1 Sharing swap partitions between Linux and Windows. Tony Acero, `ace3@midway.uchicago.edu`

1. Format the partition as a dos partition, and create the Windows swap file on it, but don't run windows yet. (You want to keep the swap file completely empty for now, so that it compresses well).
2. Boot linux and save the partition into a file. For example if the partition was /dev/hda8:

   > `

   >     dd if=/dev/hda8 of=/etc/dosswap

   > `

3. Compress the dosswap file; since it is virtually all 0's it will compress very well

   > `

   >     gzip -9 /etc/dosswap

   > `

4. Add the following to the /etc/rc file to prepare and install the swap space under Linux: XXXXX is the number of blocks in the swap partition

   > `

   >     mkswap /dev/hda8 XXXXX
   >     swapon -av

   > `

   Make sure you add an entry for the swap partition in your /etc/fstab file
5. If your init/reboot package supports /etc/brc or /sbin/brc add the following to /etc/brc, else do this by hand when you want to boot to dos|os/2 and you want to convert the swap partition back to the dos/windows version:

> `

>     swapoff -av
>     zcat /etc/dosswap.gz | dd of=/dev/hda8 bs=1k count=100

> `

# Note that this only writes the first 100 blocks back to the partition. I've found empirically that this is sufficient

>> What are the pros and cons of doing this?

Pros: you save a substantial amount of disk space.

Cons: if step 5 is not automatic, you have to remember to do it by hand, and it slows the reboot process by a nanosecond :-)

## 3.2 How to configure xdm's chooser for host selection. Arrigo Triulzi, `a.triulzi@ic.ac.uk`

1. Edit the file that launches xdm most likely /etc/rc/rc.6 or /etc/rc.local) so that it contains the following lines in the xdm startup section.

   > `

   >     /usr/bin/X11/xdm
   >     exec /usr/bin/X11/X -indirect hostname

   > `

2. Edit /usr/lib/X11/xdm/Xservers and comment out the line which starts the server on the local machine i.e. starting 0:
3. Reboot the machine and you're home and away.

I add this because when I was, desperately, trying to set it up for my own subnet over here it took me about a week to suss out all the problems.

Caveat: with old SLS (1.1.1) for some reason you can leave a -nodaemon after the xdm line -- this does NOT work for later releases.

Next Chapter, Previous Chapter

Table of contents of this chapter, General table of contents

Top of the document, Beginning of this Chapter