# PaCkAgE DaTaStReAm subversion 1 49854 # end of header 07070100085125000081a40000000000000000000000014cb5500a0000011f000000b500010002ffffffffffffffff0000001300000000subversion/pkginfoPKG=subversion NAME=subversion 1.6.13 i86pc Solaris 10 VERSION=1.6.13 PSTAMP=13th October 2010 VENDOR=The Subversion Project EMAIL=http://subversion.apache.org/ DESC=Open source version control system ARCH=i386 CATEGORY=utility CLASSES=none BASEDIR=/ ISTATES=S s 1 2 3 RSTATES=S s 1 2 3 07070100085124000081a40000000000000000000000014cb5500a00003687000000b500010002ffffffffffffffff0000001200000000subversion/pkgmap: 1 49854 1 d none /usr ? ? ? 1 d none /usr/local ? ? ? 1 d none /usr/local/bin 0755 root root 1 f none /usr/local/bin/svn 0755 root root 940920 58970 1286950915 1 f none /usr/local/bin/svnadmin 0755 root root 89772 2172 1286950915 1 f none /usr/local/bin/svndumpfilter 0755 root root 61780 16338 1286950915 1 f none /usr/local/bin/svnlook 0755 root root 111116 33820 1286950915 1 f none /usr/local/bin/svnserve 0755 root root 202396 11569 1286950915 1 f none /usr/local/bin/svnsync 0755 root root 90224 45617 1286950915 1 f none /usr/local/bin/svnversion 0755 root root 24920 51573 1286950916 1 d none /usr/local/include 0755 root root 1 d none /usr/local/include/subversion-1 0755 root root 1 f none /usr/local/include/subversion-1/mod_authz_svn.h 0644 root root 1485 54864 1286950914 1 f none /usr/local/include/subversion-1/mod_dav_svn.h 0644 root root 3296 46899 1286950914 1 f none /usr/local/include/subversion-1/svn-revision.txt 0644 root root 9 885 1286950918 1 f none /usr/local/include/subversion-1/svn_auth.h 0644 root root 44696 14679 1286950914 1 f none /usr/local/include/subversion-1/svn_base64.h 0644 root root 3430 19901 1286950914 1 f none /usr/local/include/subversion-1/svn_checksum.h 0644 root root 5753 6247 1286950914 1 f none /usr/local/include/subversion-1/svn_client.h 0644 root root 169757 52899 1286950914 1 f none /usr/local/include/subversion-1/svn_cmdline.h 0644 root root 12618 22443 1286950914 1 f none /usr/local/include/subversion-1/svn_compat.h 0644 root root 3291 5155 1286950914 1 f none /usr/local/include/subversion-1/svn_config.h 0644 root root 22775 3028 1286950914 1 f none /usr/local/include/subversion-1/svn_ctype.h 0644 root root 6210 29146 1286950914 1 f none /usr/local/include/subversion-1/svn_dav.h 0644 root root 6679 36145 1286950914 1 f none /usr/local/include/subversion-1/svn_delta.h 0644 root root 50249 58994 1286950914 1 f none /usr/local/include/subversion-1/svn_diff.h 0644 root root 28863 48186 1286950914 1 f none /usr/local/include/subversion-1/svn_dirent_uri.h 0644 root root 6929 42176 1286950914 1 f none /usr/local/include/subversion-1/svn_dso.h 0644 root root 3291 9760 1286950914 1 f none /usr/local/include/subversion-1/svn_error.h 0644 root root 17301 51122 1286950914 1 f none /usr/local/include/subversion-1/svn_error_codes.h 0644 root root 45746 52446 1286950914 1 f none /usr/local/include/subversion-1/svn_fs.h 0644 root root 76786 30786 1286950914 1 f none /usr/local/include/subversion-1/svn_hash.h 0644 root root 7092 44918 1286950914 1 f none /usr/local/include/subversion-1/svn_io.h 0644 root root 57515 5449 1286950914 1 f none /usr/local/include/subversion-1/svn_iter.h 0644 root root 4365 20204 1286950914 1 f none /usr/local/include/subversion-1/svn_md5.h 0644 root root 2426 782 1286950914 1 f none /usr/local/include/subversion-1/svn_mergeinfo.h 0644 root root 18247 23798 1286950914 1 f none /usr/local/include/subversion-1/svn_nls.h 0644 root root 1403 48808 1286950914 1 f none /usr/local/include/subversion-1/svn_opt.h 0644 root root 25589 22125 1286950914 1 f none /usr/local/include/subversion-1/svn_path.h 0644 root root 21278 59310 1286950914 1 f none /usr/local/include/subversion-1/svn_pools.h 0644 root root 2451 6391 1286950914 1 f none /usr/local/include/subversion-1/svn_props.h 0644 root root 18013 40439 1286950914 1 f none /usr/local/include/subversion-1/svn_quoprint.h 0644 root root 2418 7070 1286950914 1 f none /usr/local/include/subversion-1/svn_ra.h 0644 root root 82299 18687 1286950914 1 f none /usr/local/include/subversion-1/svn_ra_svn.h 0644 root root 17712 19619 1286950914 1 f none /usr/local/include/subversion-1/svn_repos.h 0644 root root 101813 15884 1286950914 1 f none /usr/local/include/subversion-1/svn_sorts.h 0644 root root 6218 54638 1286950914 1 f none /usr/local/include/subversion-1/svn_string.h 0644 root root 12519 20262 1286950914 1 f none /usr/local/include/subversion-1/svn_subst.h 0644 root root 20918 4378 1286950914 1 f none /usr/local/include/subversion-1/svn_time.h 0644 root root 2742 30027 1286950914 1 f none /usr/local/include/subversion-1/svn_types.h 0644 root root 32993 16847 1286950914 1 f none /usr/local/include/subversion-1/svn_user.h 0644 root root 1453 55308 1286950914 1 f none /usr/local/include/subversion-1/svn_utf.h 0644 root root 7250 50665 1286950914 1 f none /usr/local/include/subversion-1/svn_version.h 0644 root root 6946 43615 1286950914 1 f none /usr/local/include/subversion-1/svn_wc.h 0644 root root 213554 55631 1286950914 1 f none /usr/local/include/subversion-1/svn_xml.h 0644 root root 11483 8755 1286950914 1 d none /usr/local/lib 0755 root root 1 f none /usr/local/lib/libsvn_client-1.a 0644 root root 1625880 33089 1286950914 1 f none /usr/local/lib/libsvn_client-1.la 0755 root root 1787 26962 1286950914 1 s none /usr/local/lib/libsvn_client-1.so=libsvn_client-1.so.0.0.0 1 s none /usr/local/lib/libsvn_client-1.so.0=libsvn_client-1.so.0.0.0 1 f none /usr/local/lib/libsvn_client-1.so.0.0.0 0755 root root 1364204 34401 1286950914 1 f none /usr/local/lib/libsvn_delta-1.a 0644 root root 223816 30333 1286950897 1 f none /usr/local/lib/libsvn_delta-1.la 0755 root root 1249 43185 1286950897 1 s none /usr/local/lib/libsvn_delta-1.so=libsvn_delta-1.so.0.0.0 1 s none /usr/local/lib/libsvn_delta-1.so.0=libsvn_delta-1.so.0.0.0 1 f none /usr/local/lib/libsvn_delta-1.so.0.0.0 0755 root root 189164 49152 1286950897 1 f none /usr/local/lib/libsvn_diff-1.a 0644 root root 207988 9219 1286950909 1 f none /usr/local/lib/libsvn_diff-1.la 0755 root root 1242 42394 1286950909 1 s none /usr/local/lib/libsvn_diff-1.so=libsvn_diff-1.so.0.0.0 1 s none /usr/local/lib/libsvn_diff-1.so.0=libsvn_diff-1.so.0.0.0 1 f none /usr/local/lib/libsvn_diff-1.so.0.0.0 0755 root root 174920 18817 1286950909 1 f none /usr/local/lib/libsvn_fs-1.a 0644 root root 89052 12080 1286950901 1 f none /usr/local/lib/libsvn_fs-1.la 0755 root root 1364 53558 1286950901 1 s none /usr/local/lib/libsvn_fs-1.so=libsvn_fs-1.so.0.0.0 1 s none /usr/local/lib/libsvn_fs-1.so.0=libsvn_fs-1.so.0.0.0 1 f none /usr/local/lib/libsvn_fs-1.so.0.0.0 0755 root root 88356 31626 1286950901 1 f none /usr/local/lib/libsvn_fs_base-1.a 0644 root root 1740608 16483 1286950900 1 f none /usr/local/lib/libsvn_fs_base-1.la 0755 root root 1331 50860 1286950900 1 s none /usr/local/lib/libsvn_fs_base-1.so=libsvn_fs_base-1.so.0.0.0 1 s none /usr/local/lib/libsvn_fs_base-1.so.0=libsvn_fs_base-1.so.0.0.0 1 f none /usr/local/lib/libsvn_fs_base-1.so.0.0.0 0755 root root 1593824 63083 1286950900 1 f none /usr/local/lib/libsvn_fs_fs-1.a 0644 root root 644636 60443 1286950899 1 f none /usr/local/lib/libsvn_fs_fs-1.la 0755 root root 1317 49502 1286950899 1 s none /usr/local/lib/libsvn_fs_fs-1.so=libsvn_fs_fs-1.so.0.0.0 1 s none /usr/local/lib/libsvn_fs_fs-1.so.0=libsvn_fs_fs-1.so.0.0.0 1 f none /usr/local/lib/libsvn_fs_fs-1.so.0.0.0 0755 root root 543548 2294 1286950899 1 f none /usr/local/lib/libsvn_fs_util-1.a 0644 root root 17672 2792 1286950898 1 f none /usr/local/lib/libsvn_fs_util-1.la 0755 root root 1263 44837 1286950898 1 s none /usr/local/lib/libsvn_fs_util-1.so=libsvn_fs_util-1.so.0.0.0 1 s none /usr/local/lib/libsvn_fs_util-1.so.0=libsvn_fs_util-1.so.0.0.0 1 f none /usr/local/lib/libsvn_fs_util-1.so.0.0.0 0755 root root 19496 31956 1286950898 1 f none /usr/local/lib/libsvn_ra-1.a 0644 root root 151876 22756 1286950911 1 f none /usr/local/lib/libsvn_ra-1.la 0755 root root 1667 15646 1286950911 1 s none /usr/local/lib/libsvn_ra-1.so=libsvn_ra-1.so.0.0.0 1 s none /usr/local/lib/libsvn_ra-1.so.0=libsvn_ra-1.so.0.0.0 1 f none /usr/local/lib/libsvn_ra-1.so.0.0.0 0755 root root 138540 51740 1286950911 1 f none /usr/local/lib/libsvn_ra_local-1.a 0644 root root 99348 10695 1286950905 1 f none /usr/local/lib/libsvn_ra_local-1.la 0755 root root 1469 63600 1286950905 1 s none /usr/local/lib/libsvn_ra_local-1.so=libsvn_ra_local-1.so.0.0.0 1 s none /usr/local/lib/libsvn_ra_local-1.so.0=libsvn_ra_local-1.so.0.0.0 1 f none /usr/local/lib/libsvn_ra_local-1.so.0.0.0 0755 root root 97600 24790 1286950905 1 f none /usr/local/lib/libsvn_ra_neon-1.a 0644 root root 696680 43825 1286950908 1 f none /usr/local/lib/libsvn_ra_neon-1.la 0755 root root 1364 53909 1286950908 1 s none /usr/local/lib/libsvn_ra_neon-1.so=libsvn_ra_neon-1.so.0.0.0 1 s none /usr/local/lib/libsvn_ra_neon-1.so.0=libsvn_ra_neon-1.so.0.0.0 1 f none /usr/local/lib/libsvn_ra_neon-1.so.0.0.0 0755 root root 614744 42029 1286950908 1 f none /usr/local/lib/libsvn_ra_serf-1.a 0644 root root 899360 42252 1286950906 1 f none /usr/local/lib/libsvn_ra_serf-1.la 0755 root root 1328 50494 1286950906 1 s none /usr/local/lib/libsvn_ra_serf-1.so=libsvn_ra_serf-1.so.0.0.0 1 s none /usr/local/lib/libsvn_ra_serf-1.so.0=libsvn_ra_serf-1.so.0.0.0 1 f none /usr/local/lib/libsvn_ra_serf-1.so.0.0.0 0755 root root 801032 24142 1286950906 1 f none /usr/local/lib/libsvn_ra_svn-1.a 0644 root root 368216 65080 1286950902 1 f none /usr/local/lib/libsvn_ra_svn-1.la 0755 root root 1289 47090 1286950902 1 s none /usr/local/lib/libsvn_ra_svn-1.so=libsvn_ra_svn-1.so.0.0.0 1 s none /usr/local/lib/libsvn_ra_svn-1.so.0=libsvn_ra_svn-1.so.0.0.0 1 f none /usr/local/lib/libsvn_ra_svn-1.so.0.0.0 0755 root root 321892 27447 1286950902 1 f none /usr/local/lib/libsvn_repos-1.a 0644 root root 645136 43855 1286950904 1 f none /usr/local/lib/libsvn_repos-1.la 0755 root root 1415 58621 1286950904 1 s none /usr/local/lib/libsvn_repos-1.so=libsvn_repos-1.so.0.0.0 1 s none /usr/local/lib/libsvn_repos-1.so.0=libsvn_repos-1.so.0.0.0 1 f none /usr/local/lib/libsvn_repos-1.so.0.0.0 0755 root root 536800 24182 1286950904 1 f none /usr/local/lib/libsvn_subr-1.a 0644 root root 1301944 30999 1286950896 1 f none /usr/local/lib/libsvn_subr-1.la 0755 root root 1210 39701 1286950896 1 s none /usr/local/lib/libsvn_subr-1.so=libsvn_subr-1.so.0.0.0 1 s none /usr/local/lib/libsvn_subr-1.so.0=libsvn_subr-1.so.0.0.0 1 f none /usr/local/lib/libsvn_subr-1.so.0.0.0 0755 root root 1097424 56404 1286950896 1 f none /usr/local/lib/libsvn_wc-1.a 0644 root root 1342776 6757 1286950912 1 f none /usr/local/lib/libsvn_wc-1.la 0755 root root 1293 46976 1286950912 1 s none /usr/local/lib/libsvn_wc-1.so=libsvn_wc-1.so.0.0.0 1 s none /usr/local/lib/libsvn_wc-1.so.0=libsvn_wc-1.so.0.0.0 1 f none /usr/local/lib/libsvn_wc-1.so.0.0.0 0755 root root 1100280 21615 1286950912 1 d none /usr/local/share 0755 root root 1 d none /usr/local/share/locale 0755 root root 1 d none /usr/local/share/locale/de 0755 root root 1 d none /usr/local/share/locale/de/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/de/LC_MESSAGES/subversion.mo 0644 root root 312655 65181 1286950918 1 d none /usr/local/share/locale/es 0755 root root 1 d none /usr/local/share/locale/es/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/es/LC_MESSAGES/subversion.mo 0644 root root 237418 24909 1286950918 1 d none /usr/local/share/locale/fr 0755 root root 1 d none /usr/local/share/locale/fr/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/fr/LC_MESSAGES/subversion.mo 0644 root root 310600 29765 1286950918 1 d none /usr/local/share/locale/it 0755 root root 1 d none /usr/local/share/locale/it/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/it/LC_MESSAGES/subversion.mo 0644 root root 191643 9367 1286950918 1 d none /usr/local/share/locale/ja 0755 root root 1 d none /usr/local/share/locale/ja/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/ja/LC_MESSAGES/subversion.mo 0644 root root 294398 65014 1286950918 1 d none /usr/local/share/locale/ko 0755 root root 1 d none /usr/local/share/locale/ko/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/ko/LC_MESSAGES/subversion.mo 0644 root root 284779 38622 1286950918 1 d none /usr/local/share/locale/nb 0755 root root 1 d none /usr/local/share/locale/nb/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/nb/LC_MESSAGES/subversion.mo 0644 root root 267717 63099 1286950918 1 d none /usr/local/share/locale/pl 0755 root root 1 d none /usr/local/share/locale/pl/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/pl/LC_MESSAGES/subversion.mo 0644 root root 313549 28403 1286950918 1 d none /usr/local/share/locale/pt_BR 0755 root root 1 d none /usr/local/share/locale/pt_BR/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/pt_BR/LC_MESSAGES/subversion.mo 0644 root root 177981 43957 1286950918 1 d none /usr/local/share/locale/sv 0755 root root 1 d none /usr/local/share/locale/sv/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/sv/LC_MESSAGES/subversion.mo 0644 root root 161957 65434 1286950918 1 d none /usr/local/share/locale/zh_CN 0755 root root 1 d none /usr/local/share/locale/zh_CN/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/zh_CN/LC_MESSAGES/subversion.mo 0644 root root 278884 38079 1286950918 1 d none /usr/local/share/locale/zh_TW 0755 root root 1 d none /usr/local/share/locale/zh_TW/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/zh_TW/LC_MESSAGES/subversion.mo 0644 root root 139461 9027 1286950918 1 d none /usr/local/share/man 0755 root root 1 d none /usr/local/share/man/man1 0755 root root 1 f none /usr/local/share/man/man1/svn.1 0644 root root 1047 29048 1286950916 1 f none /usr/local/share/man/man1/svnadmin.1 0644 root root 1094 33855 1286950916 1 f none /usr/local/share/man/man1/svndumpfilter.1 0644 root root 1094 33867 1286950916 1 f none /usr/local/share/man/man1/svnlook.1 0644 root root 1087 33190 1286950916 1 f none /usr/local/share/man/man1/svnsync.1 0644 root root 1085 33157 1286950916 1 f none /usr/local/share/man/man1/svnversion.1 0644 root root 1085 32912 1286950916 1 d none /usr/local/share/man/man5 0755 root root 1 f none /usr/local/share/man/man5/svnserve.conf.5 0644 root root 2794 55682 1286950916 1 d none /usr/local/share/man/man8 0755 root root 1 f none /usr/local/share/man/man8/svnserve.8 0644 root root 4449 8815 1286950916 1 i checkinstall 790 2504 1286950920 1 i pkginfo 287 22885 1286950922 07070100000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000b00000000TRAILER!!!07070100085125000081a40000000000000000000000014cb5500a0000011f000000b500010002ffffffffffffffff0000000800000000pkginfoPKG=subversion NAME=subversion 1.6.13 i86pc Solaris 10 VERSION=1.6.13 PSTAMP=13th October 2010 VENDOR=The Subversion Project EMAIL=http://subversion.apache.org/ DESC=Open source version control system ARCH=i386 CATEGORY=utility CLASSES=none BASEDIR=/ ISTATES=S s 1 2 3 RSTATES=S s 1 2 3 07070100085124000081a40000000000000000000000014cb5500a00003687000000b500010002ffffffffffffffff0000000700000000pkgmap: 1 49854 1 d none /usr ? ? ? 1 d none /usr/local ? ? ? 1 d none /usr/local/bin 0755 root root 1 f none /usr/local/bin/svn 0755 root root 940920 58970 1286950915 1 f none /usr/local/bin/svnadmin 0755 root root 89772 2172 1286950915 1 f none /usr/local/bin/svndumpfilter 0755 root root 61780 16338 1286950915 1 f none /usr/local/bin/svnlook 0755 root root 111116 33820 1286950915 1 f none /usr/local/bin/svnserve 0755 root root 202396 11569 1286950915 1 f none /usr/local/bin/svnsync 0755 root root 90224 45617 1286950915 1 f none /usr/local/bin/svnversion 0755 root root 24920 51573 1286950916 1 d none /usr/local/include 0755 root root 1 d none /usr/local/include/subversion-1 0755 root root 1 f none /usr/local/include/subversion-1/mod_authz_svn.h 0644 root root 1485 54864 1286950914 1 f none /usr/local/include/subversion-1/mod_dav_svn.h 0644 root root 3296 46899 1286950914 1 f none /usr/local/include/subversion-1/svn-revision.txt 0644 root root 9 885 1286950918 1 f none /usr/local/include/subversion-1/svn_auth.h 0644 root root 44696 14679 1286950914 1 f none /usr/local/include/subversion-1/svn_base64.h 0644 root root 3430 19901 1286950914 1 f none /usr/local/include/subversion-1/svn_checksum.h 0644 root root 5753 6247 1286950914 1 f none /usr/local/include/subversion-1/svn_client.h 0644 root root 169757 52899 1286950914 1 f none /usr/local/include/subversion-1/svn_cmdline.h 0644 root root 12618 22443 1286950914 1 f none /usr/local/include/subversion-1/svn_compat.h 0644 root root 3291 5155 1286950914 1 f none /usr/local/include/subversion-1/svn_config.h 0644 root root 22775 3028 1286950914 1 f none /usr/local/include/subversion-1/svn_ctype.h 0644 root root 6210 29146 1286950914 1 f none /usr/local/include/subversion-1/svn_dav.h 0644 root root 6679 36145 1286950914 1 f none /usr/local/include/subversion-1/svn_delta.h 0644 root root 50249 58994 1286950914 1 f none /usr/local/include/subversion-1/svn_diff.h 0644 root root 28863 48186 1286950914 1 f none /usr/local/include/subversion-1/svn_dirent_uri.h 0644 root root 6929 42176 1286950914 1 f none /usr/local/include/subversion-1/svn_dso.h 0644 root root 3291 9760 1286950914 1 f none /usr/local/include/subversion-1/svn_error.h 0644 root root 17301 51122 1286950914 1 f none /usr/local/include/subversion-1/svn_error_codes.h 0644 root root 45746 52446 1286950914 1 f none /usr/local/include/subversion-1/svn_fs.h 0644 root root 76786 30786 1286950914 1 f none /usr/local/include/subversion-1/svn_hash.h 0644 root root 7092 44918 1286950914 1 f none /usr/local/include/subversion-1/svn_io.h 0644 root root 57515 5449 1286950914 1 f none /usr/local/include/subversion-1/svn_iter.h 0644 root root 4365 20204 1286950914 1 f none /usr/local/include/subversion-1/svn_md5.h 0644 root root 2426 782 1286950914 1 f none /usr/local/include/subversion-1/svn_mergeinfo.h 0644 root root 18247 23798 1286950914 1 f none /usr/local/include/subversion-1/svn_nls.h 0644 root root 1403 48808 1286950914 1 f none /usr/local/include/subversion-1/svn_opt.h 0644 root root 25589 22125 1286950914 1 f none /usr/local/include/subversion-1/svn_path.h 0644 root root 21278 59310 1286950914 1 f none /usr/local/include/subversion-1/svn_pools.h 0644 root root 2451 6391 1286950914 1 f none /usr/local/include/subversion-1/svn_props.h 0644 root root 18013 40439 1286950914 1 f none /usr/local/include/subversion-1/svn_quoprint.h 0644 root root 2418 7070 1286950914 1 f none /usr/local/include/subversion-1/svn_ra.h 0644 root root 82299 18687 1286950914 1 f none /usr/local/include/subversion-1/svn_ra_svn.h 0644 root root 17712 19619 1286950914 1 f none /usr/local/include/subversion-1/svn_repos.h 0644 root root 101813 15884 1286950914 1 f none /usr/local/include/subversion-1/svn_sorts.h 0644 root root 6218 54638 1286950914 1 f none /usr/local/include/subversion-1/svn_string.h 0644 root root 12519 20262 1286950914 1 f none /usr/local/include/subversion-1/svn_subst.h 0644 root root 20918 4378 1286950914 1 f none /usr/local/include/subversion-1/svn_time.h 0644 root root 2742 30027 1286950914 1 f none /usr/local/include/subversion-1/svn_types.h 0644 root root 32993 16847 1286950914 1 f none /usr/local/include/subversion-1/svn_user.h 0644 root root 1453 55308 1286950914 1 f none /usr/local/include/subversion-1/svn_utf.h 0644 root root 7250 50665 1286950914 1 f none /usr/local/include/subversion-1/svn_version.h 0644 root root 6946 43615 1286950914 1 f none /usr/local/include/subversion-1/svn_wc.h 0644 root root 213554 55631 1286950914 1 f none /usr/local/include/subversion-1/svn_xml.h 0644 root root 11483 8755 1286950914 1 d none /usr/local/lib 0755 root root 1 f none /usr/local/lib/libsvn_client-1.a 0644 root root 1625880 33089 1286950914 1 f none /usr/local/lib/libsvn_client-1.la 0755 root root 1787 26962 1286950914 1 s none /usr/local/lib/libsvn_client-1.so=libsvn_client-1.so.0.0.0 1 s none /usr/local/lib/libsvn_client-1.so.0=libsvn_client-1.so.0.0.0 1 f none /usr/local/lib/libsvn_client-1.so.0.0.0 0755 root root 1364204 34401 1286950914 1 f none /usr/local/lib/libsvn_delta-1.a 0644 root root 223816 30333 1286950897 1 f none /usr/local/lib/libsvn_delta-1.la 0755 root root 1249 43185 1286950897 1 s none /usr/local/lib/libsvn_delta-1.so=libsvn_delta-1.so.0.0.0 1 s none /usr/local/lib/libsvn_delta-1.so.0=libsvn_delta-1.so.0.0.0 1 f none /usr/local/lib/libsvn_delta-1.so.0.0.0 0755 root root 189164 49152 1286950897 1 f none /usr/local/lib/libsvn_diff-1.a 0644 root root 207988 9219 1286950909 1 f none /usr/local/lib/libsvn_diff-1.la 0755 root root 1242 42394 1286950909 1 s none /usr/local/lib/libsvn_diff-1.so=libsvn_diff-1.so.0.0.0 1 s none /usr/local/lib/libsvn_diff-1.so.0=libsvn_diff-1.so.0.0.0 1 f none /usr/local/lib/libsvn_diff-1.so.0.0.0 0755 root root 174920 18817 1286950909 1 f none /usr/local/lib/libsvn_fs-1.a 0644 root root 89052 12080 1286950901 1 f none /usr/local/lib/libsvn_fs-1.la 0755 root root 1364 53558 1286950901 1 s none /usr/local/lib/libsvn_fs-1.so=libsvn_fs-1.so.0.0.0 1 s none /usr/local/lib/libsvn_fs-1.so.0=libsvn_fs-1.so.0.0.0 1 f none /usr/local/lib/libsvn_fs-1.so.0.0.0 0755 root root 88356 31626 1286950901 1 f none /usr/local/lib/libsvn_fs_base-1.a 0644 root root 1740608 16483 1286950900 1 f none /usr/local/lib/libsvn_fs_base-1.la 0755 root root 1331 50860 1286950900 1 s none /usr/local/lib/libsvn_fs_base-1.so=libsvn_fs_base-1.so.0.0.0 1 s none /usr/local/lib/libsvn_fs_base-1.so.0=libsvn_fs_base-1.so.0.0.0 1 f none /usr/local/lib/libsvn_fs_base-1.so.0.0.0 0755 root root 1593824 63083 1286950900 1 f none /usr/local/lib/libsvn_fs_fs-1.a 0644 root root 644636 60443 1286950899 1 f none /usr/local/lib/libsvn_fs_fs-1.la 0755 root root 1317 49502 1286950899 1 s none /usr/local/lib/libsvn_fs_fs-1.so=libsvn_fs_fs-1.so.0.0.0 1 s none /usr/local/lib/libsvn_fs_fs-1.so.0=libsvn_fs_fs-1.so.0.0.0 1 f none /usr/local/lib/libsvn_fs_fs-1.so.0.0.0 0755 root root 543548 2294 1286950899 1 f none /usr/local/lib/libsvn_fs_util-1.a 0644 root root 17672 2792 1286950898 1 f none /usr/local/lib/libsvn_fs_util-1.la 0755 root root 1263 44837 1286950898 1 s none /usr/local/lib/libsvn_fs_util-1.so=libsvn_fs_util-1.so.0.0.0 1 s none /usr/local/lib/libsvn_fs_util-1.so.0=libsvn_fs_util-1.so.0.0.0 1 f none /usr/local/lib/libsvn_fs_util-1.so.0.0.0 0755 root root 19496 31956 1286950898 1 f none /usr/local/lib/libsvn_ra-1.a 0644 root root 151876 22756 1286950911 1 f none /usr/local/lib/libsvn_ra-1.la 0755 root root 1667 15646 1286950911 1 s none /usr/local/lib/libsvn_ra-1.so=libsvn_ra-1.so.0.0.0 1 s none /usr/local/lib/libsvn_ra-1.so.0=libsvn_ra-1.so.0.0.0 1 f none /usr/local/lib/libsvn_ra-1.so.0.0.0 0755 root root 138540 51740 1286950911 1 f none /usr/local/lib/libsvn_ra_local-1.a 0644 root root 99348 10695 1286950905 1 f none /usr/local/lib/libsvn_ra_local-1.la 0755 root root 1469 63600 1286950905 1 s none /usr/local/lib/libsvn_ra_local-1.so=libsvn_ra_local-1.so.0.0.0 1 s none /usr/local/lib/libsvn_ra_local-1.so.0=libsvn_ra_local-1.so.0.0.0 1 f none /usr/local/lib/libsvn_ra_local-1.so.0.0.0 0755 root root 97600 24790 1286950905 1 f none /usr/local/lib/libsvn_ra_neon-1.a 0644 root root 696680 43825 1286950908 1 f none /usr/local/lib/libsvn_ra_neon-1.la 0755 root root 1364 53909 1286950908 1 s none /usr/local/lib/libsvn_ra_neon-1.so=libsvn_ra_neon-1.so.0.0.0 1 s none /usr/local/lib/libsvn_ra_neon-1.so.0=libsvn_ra_neon-1.so.0.0.0 1 f none /usr/local/lib/libsvn_ra_neon-1.so.0.0.0 0755 root root 614744 42029 1286950908 1 f none /usr/local/lib/libsvn_ra_serf-1.a 0644 root root 899360 42252 1286950906 1 f none /usr/local/lib/libsvn_ra_serf-1.la 0755 root root 1328 50494 1286950906 1 s none /usr/local/lib/libsvn_ra_serf-1.so=libsvn_ra_serf-1.so.0.0.0 1 s none /usr/local/lib/libsvn_ra_serf-1.so.0=libsvn_ra_serf-1.so.0.0.0 1 f none /usr/local/lib/libsvn_ra_serf-1.so.0.0.0 0755 root root 801032 24142 1286950906 1 f none /usr/local/lib/libsvn_ra_svn-1.a 0644 root root 368216 65080 1286950902 1 f none /usr/local/lib/libsvn_ra_svn-1.la 0755 root root 1289 47090 1286950902 1 s none /usr/local/lib/libsvn_ra_svn-1.so=libsvn_ra_svn-1.so.0.0.0 1 s none /usr/local/lib/libsvn_ra_svn-1.so.0=libsvn_ra_svn-1.so.0.0.0 1 f none /usr/local/lib/libsvn_ra_svn-1.so.0.0.0 0755 root root 321892 27447 1286950902 1 f none /usr/local/lib/libsvn_repos-1.a 0644 root root 645136 43855 1286950904 1 f none /usr/local/lib/libsvn_repos-1.la 0755 root root 1415 58621 1286950904 1 s none /usr/local/lib/libsvn_repos-1.so=libsvn_repos-1.so.0.0.0 1 s none /usr/local/lib/libsvn_repos-1.so.0=libsvn_repos-1.so.0.0.0 1 f none /usr/local/lib/libsvn_repos-1.so.0.0.0 0755 root root 536800 24182 1286950904 1 f none /usr/local/lib/libsvn_subr-1.a 0644 root root 1301944 30999 1286950896 1 f none /usr/local/lib/libsvn_subr-1.la 0755 root root 1210 39701 1286950896 1 s none /usr/local/lib/libsvn_subr-1.so=libsvn_subr-1.so.0.0.0 1 s none /usr/local/lib/libsvn_subr-1.so.0=libsvn_subr-1.so.0.0.0 1 f none /usr/local/lib/libsvn_subr-1.so.0.0.0 0755 root root 1097424 56404 1286950896 1 f none /usr/local/lib/libsvn_wc-1.a 0644 root root 1342776 6757 1286950912 1 f none /usr/local/lib/libsvn_wc-1.la 0755 root root 1293 46976 1286950912 1 s none /usr/local/lib/libsvn_wc-1.so=libsvn_wc-1.so.0.0.0 1 s none /usr/local/lib/libsvn_wc-1.so.0=libsvn_wc-1.so.0.0.0 1 f none /usr/local/lib/libsvn_wc-1.so.0.0.0 0755 root root 1100280 21615 1286950912 1 d none /usr/local/share 0755 root root 1 d none /usr/local/share/locale 0755 root root 1 d none /usr/local/share/locale/de 0755 root root 1 d none /usr/local/share/locale/de/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/de/LC_MESSAGES/subversion.mo 0644 root root 312655 65181 1286950918 1 d none /usr/local/share/locale/es 0755 root root 1 d none /usr/local/share/locale/es/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/es/LC_MESSAGES/subversion.mo 0644 root root 237418 24909 1286950918 1 d none /usr/local/share/locale/fr 0755 root root 1 d none /usr/local/share/locale/fr/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/fr/LC_MESSAGES/subversion.mo 0644 root root 310600 29765 1286950918 1 d none /usr/local/share/locale/it 0755 root root 1 d none /usr/local/share/locale/it/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/it/LC_MESSAGES/subversion.mo 0644 root root 191643 9367 1286950918 1 d none /usr/local/share/locale/ja 0755 root root 1 d none /usr/local/share/locale/ja/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/ja/LC_MESSAGES/subversion.mo 0644 root root 294398 65014 1286950918 1 d none /usr/local/share/locale/ko 0755 root root 1 d none /usr/local/share/locale/ko/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/ko/LC_MESSAGES/subversion.mo 0644 root root 284779 38622 1286950918 1 d none /usr/local/share/locale/nb 0755 root root 1 d none /usr/local/share/locale/nb/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/nb/LC_MESSAGES/subversion.mo 0644 root root 267717 63099 1286950918 1 d none /usr/local/share/locale/pl 0755 root root 1 d none /usr/local/share/locale/pl/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/pl/LC_MESSAGES/subversion.mo 0644 root root 313549 28403 1286950918 1 d none /usr/local/share/locale/pt_BR 0755 root root 1 d none /usr/local/share/locale/pt_BR/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/pt_BR/LC_MESSAGES/subversion.mo 0644 root root 177981 43957 1286950918 1 d none /usr/local/share/locale/sv 0755 root root 1 d none /usr/local/share/locale/sv/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/sv/LC_MESSAGES/subversion.mo 0644 root root 161957 65434 1286950918 1 d none /usr/local/share/locale/zh_CN 0755 root root 1 d none /usr/local/share/locale/zh_CN/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/zh_CN/LC_MESSAGES/subversion.mo 0644 root root 278884 38079 1286950918 1 d none /usr/local/share/locale/zh_TW 0755 root root 1 d none /usr/local/share/locale/zh_TW/LC_MESSAGES 0755 root root 1 f none /usr/local/share/locale/zh_TW/LC_MESSAGES/subversion.mo 0644 root root 139461 9027 1286950918 1 d none /usr/local/share/man 0755 root root 1 d none /usr/local/share/man/man1 0755 root root 1 f none /usr/local/share/man/man1/svn.1 0644 root root 1047 29048 1286950916 1 f none /usr/local/share/man/man1/svnadmin.1 0644 root root 1094 33855 1286950916 1 f none /usr/local/share/man/man1/svndumpfilter.1 0644 root root 1094 33867 1286950916 1 f none /usr/local/share/man/man1/svnlook.1 0644 root root 1087 33190 1286950916 1 f none /usr/local/share/man/man1/svnsync.1 0644 root root 1085 33157 1286950916 1 f none /usr/local/share/man/man1/svnversion.1 0644 root root 1085 32912 1286950916 1 d none /usr/local/share/man/man5 0755 root root 1 f none /usr/local/share/man/man5/svnserve.conf.5 0644 root root 2794 55682 1286950916 1 d none /usr/local/share/man/man8 0755 root root 1 f none /usr/local/share/man/man8/svnserve.8 0644 root root 4449 8815 1286950916 1 i checkinstall 790 2504 1286950920 1 i pkginfo 287 22885 1286950922 070701000851be000041ed0000000000000000000000024cb5500a00000000000000b500010002ffffffffffffffff0000000800000000install070701000851bf000081ed0000000000000000000000014cb5500800000316000000b500010002ffffffffffffffff0000001500000000install/checkinstall#!/bin/sh # expected_bits="64" expected_release="5.10" expected_platform="i386" # release=`uname -r` platform=`uname -p` bits=`isainfo -b` # if [ ${platform} != ${expected_platform} ]; then echo "\n\n\n\tThis package must be installed on a ${expected_platform} architecture\n" echo "\tAborting installation.\n\n\n" exit 1 fi if [ ${release} != ${expected_release} ]; then echo "\n\n\n\tThis package must be installed on a ${expected_release} machine\n" echo "\tAborting installation.\n\n\n" exit 1 fi #if [ ${bits} != ${expected_bits} ]; then # echo "\n\n\n\tThis package must be installed on a ${expected_bits} bit machine\n" # echo "\tYour machine is running a ${bits} bit O.S. currently\n" # echo "\tAborting installation.\n\n\n" # exit 1 #fi exit 0 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_MESSAGES07070100085199000081a40000000000000000000000014cb550060002ec9b000000b500010002ffffffffffffffff0000003900000000root/usr/local/share/locale/it/LC_MESSAGES/subversion.mo.]||C|% }2}L}"k},}}} }} ~*~G~f~{~~~~)~ ~,v>%   /:#Vz!р'%*B3m . #!+Eq""Ԃ& (RI7+ԃ'0((Y.02%';Ac@+*"=`,1ˆL"Jm$$'& !4iV8)#>M%j&Љ4$<-aB&Ҋ&@+`$1ȋ,"'8J ӌ)$1?/q7-ٍ*!3<UB>0Q9926By)8 $(7&`'ʓ2$7<\9Ӕ+&$8)]A-ɕ'#,C4p1-ז48:<s.,ߗ6 'C9k0.֘(,.6[6%ə5,%$Rw$̚F?C:4)/BG0ʜAB=A  ̝ם -;LNמ "%Ag&ɟߟ <!^q3'22#Nr "4Ρ??C&Ƣ$ &FZr'(ף 'F<ZƤ٤.+?K"%ԥ7 3Lg"zզ9$Sx78ʧ!9Sc}ͨ&8M"g)ɩ# ):"LoR|ޫ4'R$z$6Ĭ"$C b$2&ۭ7Gd &ή'=%[ȯ7ޯ>.>m?=O*-zL3G)/q1<.+7Z !)ճ&/&9VW% </;l;;< {]Aٶ6'R#z. ڸek{&¹P8i8cۺV?ARػ@+?l ؼ2*2þ62M*-ٿ."!(Dm #Xx=$!.@9o%$6A+=m;A2>9q1O$Iun5(%Ci,.$(*D_qDH (:O!i p!$$*&%>-l Sa|#zG;U/9 -C,q.&3<($e&$4!Y@{B'*'R6c! 2+Fr:*+5Bx%& 2P#i&%%=/X)40$U'o%"!)D)n'!W:- .9h#$%"B8e700*M:x : !9>x#T4SVB4UwJ',@'m" &#n?@& #3SW/'%6\x'#!"7D&|"%;Yt)6b!e5) %J+p1/'@_Cx#<>/\*+&R7d)&Eb}'h"'Je3v'I%B^<~7 *(-S52&4*Fq//A <MI.468jo $%>d"# 2 !>,Q~* ,A\k!,!#8Ma|* c n0&,W0M  *7G!W(yD)$)N_z,kB CUq### #1U>o ! (7 *`  $ L E  `  % ! % 9 J d ,z    - (- *V % ) + & $$ I e .{  ,  !'4\-m/**0!R0[AAA1R7CRLS]&-%(S#| .+!&'N$g-$$,6c?|'" $E1\/,1"^- K1 }#(-&7^| V$0>'o%+3 (('A?i#13$K.p$#.E$Z) +$,P} '" '0 4X 6 '   !d!","."&##*#$N#s##<# #*$1$/I$#y$$ $ $D$9#%)]%u%6%C4&6x&+&*'&*-*#D*(h*&**/*++&(+O+.d+(++++,,,yC,W,5-5K--%-"--...8/H/_/ 0$&02K0~00500>1!@1 b1o1Q1111 22=52s3#3/3-3'4(04HY4J4+4'5)A5)k5&5"5<5N64k6(606?6?:7Fz7?7 88-82I8E|88G8N)9,x9;9B93$:(X::|:/;!M;Io;N;S<M\<M<<h=(=>=<=:$>"_>&>2>$>)?+?J?*j??#?1?(@&/@"V@Ey@ @@@<@:8AsA/BLB<BE C.OC.~C1C=C?D*]D5D"DhDPJE-EEOE7F%UF8{F9F1F1 G7RG$GGRG*H(IH&rHH&HbHA8IzI$II4IJ'JFJaJuJJJJJJ7K+HK3tKK"K!K& L 1L RL]sLRL^$MRMPMZ'NKN$N?N$3O%XO~OO$O OO0P3DP$xP%P&PP* Q4QLQ#UQyQ'Q?Q+Q;RYRtR2RRR)R$!S$FSkSSSSSST-T!MToT#T,T1T UU2UMUjU}UUUUU)U( V&IV(pV'VV!VW W6WSW-nW]W,W*'XRX oX/XX)X Y%&Y"LY-oYYYY*Y+Z/=Z.mZ.Z-Z!Z [#<[`[~[[([["[\(5\=^\?\"\ \E ]#P]t]?]]A^@^_"_B_U[___>_3'`![`9}` ``!`"`"a?a2YaRa1a!bG3b{b+b+b0bc 2c.=clccc!c*c+d04d0edd.d.d, e,8eeee$e#e ee"e!fs.Yssss)ss$t ;t\tksttktbu{uu*uuu v!v8vSvMqv*v/v w?;we{ww}wxx,x!x x-xy&y{Q{t |]}U}5~S~$>TcfǁP.rO/4nF#5jW\`i6V=@H~hNj\0,G`|\\^Rs`Ƒ'ݓa2V&"(Ӕ41HZ)k***- Cd s,1̖( ۗ %1W7u Θ( *'EGm5ә ##3'W"(DD&TZ{I֛4 3UD:Μ5 R?4(ǝ1M"Mp%'#F)j;?ПU-f,ޠ#."F'irf(k#ɢ5"9\)r;#7 DD*#*ؤ#:'b5}@;$0BUߦ-%K5q:9/L[j%rD#ݨF&H@o;JO7!F\OM4Gҭ09L/_1$/2:M+N?C7X9LʰE`]GD)K1u;D+(?T@GճGGeO1=/5m33׵: DFB-ζG;D'0ܷ '$RLRaMT/ҹ#?Tm:QR6Pڻ," O-pGe1L~.+ͽ;/54e**ž$'"=W`&ؿE1E?w?1!)9K4@MMI%813(+\)*78Q*2,4 JMk#( 5'2]?S&$7K'K(/ 2P 6,1,:#g0E)K,%xKK26"i1&!$B^%yE2!4&V1}!:& 037d2 (&#Oes0o73+ /86h+?< EHQ;E4b7AUAg'&$34Q$0FL#;pX*0*Ny H_!DKFeY:XDSL272NjPH *S0~6;8"K[c. (:KchkGPYO@Q6m.@!Ukw0((Q8aQ::Vn[<\UA?1 q&5?#A@"KG)9Jc%F)7E(})+%"4ZQ!H6K&@@,+3XFKKkEK*B?A&_1K}T Hb,!2-5K<65s*)6)5_{ .(W.q+0(#&J"e*#)#!%Gkc:* 05fB< + 0LN}% 2OJ] )CXh%8A: EDFA@ZT,/5e)~)*VaT 6 A / HH . ) *  ?0 0p  ? 0 ) G %+ Q g # 9 M ./%^$$;A $L!q)///'M0u7C(A(jNE2(6[#(*/%7U>750:&k'"m/K3{40@>V)2('!Ce,4BB)l>>HLO2R "4-ab. $'*L.w/ruIyS9da#T2x)".1'.Y1yh4 2 L .!eL!#!8!A"'Q"/y"%""" ###=<#1z# #D#<$ O$%p$%$*$0$'%@%]%w%'%3%=%r-&t&B'7X','9'F'9>(*x(1(&((S)Bo)E)N)<G***#*'*- +08+i+B~++"+,$, 5, V,w,',,,-,q-*z---@-2._K.0.,.4 /X>/Z//30;E0:0E0C15F1M|1?1# 2<.2/k2=2E2D3^d3?3@4BD4{45!#5E5c5<5.5-506M61_66166>6$07@U7&7&77E7!D8f8x8188#8@8%@9f999$9#9:' :IH:-::~<=w?6?4?W!@%y@ @@@@+@5ApSA%A8A-#BQB(fB&B$BBHCMDbD)DnD/E)KEuE#E+E"E1F16F+hFUFF GG*4G_G|G0G-G&GJHaiHTH! I!BI&dI"I&ILI$"JGJ,aJJ-J*J7K5?K7uK1K4K9L3NL0L&LL>L+8M>dM-M/M2N4N:GN=N8N6N;0O lO6wOGODOD;PIPRPDQ_bQIQx R+R8R2R0S NS<XS>S5S: T&ET+lTCTT6T1*U0\U>U"UXU-HV,vV!V0V1VJ(W-sWW-WWWHX5]X%X4X6X#%YIYbYvYYPY+Y/%Z7UZ?Z!Z9Z&)[)P[+z[[f[$\AC\,\*\(\@]G]T]+^=^Q^e^^/^/^/^M._-|_C__% `3`-S`=`!`.`-a >a%_aa$a3a-a)b7Eb }b(bb2b5c+L=%ɓ:/*ZCz,*8O3ik= G&X;֖3$%Jb!ؗg5g3'ј22F,y,fә^:eL`Le]9qO4C0%t#-$:'?b2)՞+(+8T)ޟ9L.:{A.'@B!$1ʡ1/.'^-#&آ!&;'b )ɣ/E#i#$ˤ $;`!{50ӥF5K2+,& 4)N'xJvBb/)ը)B)#l6ǩ,%+9e"%>Ϊ? 5M241)-G0u*&Ѭ)H"k/+֭QMT= L,8)eBү\O(M'vl&!BQd@,B$g"{2&ѳ =9`w?ش-LF 9><-j.5ɶ:7:*r@A޷P Nq(9<#=`@#߹./K{.-غ#4*@_$<Ż'S>"17(.H0w½ʽ! "2UU8"021Hf'v115Ut;868U3 9)4B'w0J".>$m(%-<L(b! '(W,wL) Gh0$83Jqet#i!$6$ 0$L#q+#[7A9y/Dc(#@0d<, 3ayXZSfi0n3pfU Ka N1o9>-]tWZnj~8";MokhyD##8\ CLdL=HRVJ8DWUF TP _ %yjw~ ;}60| :1:4 1y=M$:,Iq\av {") /(ZXl2@"HK" @@N BpC[VUOf)Fu$6U3ZdQ(*{v)NxK4I?`*[Y?Q(\ggUzMLO=]&*TCKr,R!y h}nt[Hh$<_Bo/Z9*7Ef`pEi{A<Kpc#]BF ! &_c)%X1M 6B0xYx5 *7sB8</AZY?\nJ7\WI|-3=MeC|Wu L&w[ Vl6k_,9]Slf"Ag`!gDL)Tb`.'rtks}?|Ex&2!4vPz\o%+r>#GL7>ck[Lymjoui@JIc !tWWz8YGeZ5#B MN6>(;vXqU O\pz|hL.!qKqb3~^ag b/bJ+^l~ nO3;w4SjCs5mcI=krEaVe+# +eSR{"nNfn4{OPknT$*HqfN^;r( vlm`+y.v';2F&$iUdNGQOz `Sz| f'h%i2&s6P2b,Hwu..80_[e9195-HKH?-Y odwDj+EXTti_m,-am]1%?A:@lj>s7 "Rw<37x93eb 5d<>-R '  F,RmaG0k}5s0.h)-M{ u=]d0o1c^F]tX(pg/YqaP>@}G$W8}VCDJh~I9o#';R X 8JST%~rp:'<td/GiQy^VQE^C :xAA4uQDS=~j2DZP# --- Changelist '%s': ------- Committed new rev %ld (loaded from original rev %ld) >>> ------- Committed revision %ld >>> Committed revision %ld. Error: no prefixes supplied. Fetching external item into '%s' Performing status on external item at '%s' Recovery completed. Valid options: Warning: %s * adding path : %s ... * deleting path : %s ... * editing path : %s ... * replacing path : %s ... %ld => (dropped) Merged %s:r%s%s - handles '%s' scheme (%a, %d %b %Y) (from %s:%ld) - The certificate has an unknown error. - The certificate has expired. - The certificate hostname does not match. - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! - The certificate is not yet valid. ARG done. "%s": unknown command. %b %d %Y%s (revision %ld)%s (working copy)%s of '%s'%s of '%s': %d %s (%s://%s)%s, version %s compiled %s, %s %s: (Not a valid URL) %s: (Not a versioned resource) %sProperty changes on: %s%s%swarning: %s '%s' is not the same repository as '%s''%s' already exists'%s' already exists and is in the way'%s' already exists and is not a directory'%s' contains invalid filesystem format option '%s''%s' does not appear to be a URL'%s' does not appear to be a working copy path'%s' does not define '%s()''%s' does not exist'%s' does not exist in revision %ld'%s' does not have a URL associated with it'%s' exists and is non-empty'%s' exists and is not a directory'%s' has an unrecognized node kind'%s' has local modifications'%s' has lock token, but no lock owner'%s' has no URL'%s' has no ancestry information'%s' hook failed (did not exit cleanly: apr_exit_why_e was %d, exitcode was %d). '%s' hook succeeded, but error output could not be read'%s' in revision %ld is an unrelated object'%s' is a URL when it should be a path '%s' is a URL, but URLs cannot be commit targets'%s' is a URL, probably should be a path'%s' is a reserved name and cannot be imported'%s' is a wcprop, thus not accessible to clients'%s' is already a working copy for a different URL'%s' is already under version control'%s' is an URL when it should be a path'%s' is in the way of the resource actually under version control'%s' is marked as absent, so it cannot be scheduled for addition'%s' is neither a file nor a directory name'%s' is not a directory'%s' is not a file'%s' is not a file in revision %ld'%s' is not a file or directory'%s' is not a valid EOL value'%s' is not a valid Subversion property name'%s' is not a valid administrative directory name'%s' is not a valid depth; try 'empty', 'files', 'immediates', or 'infinity''%s' is not a valid revision range'%s' is not a working copy'%s' is not a working copy directory'%s' is not locked'%s' is not locked in the repository'%s' is not locked in this working copy'%s' is not the root of the repository'%s' is not under version control'%s' is not under version control and is not part of the commit, yet its child '%s' is part of the commit'%s' is scheduled for addition within unversioned parent'%s' isn't in the same repository as '%s''%s' locked by user '%s'. '%s' not found'%s' not found in filesystem'%s' not versioned, and not exported '%s' path not found'%s' refers to a directory'%s' returned %d'%s' to '%s' is not a valid relocation'%s' unlocked. '%s' was not found in the repository at revision %ld'%s' was not present on the resource'--new' option only valid with '--old' option'DAV:baseline-collection' was not present on the baseline resource'get-file-revs' REPORT not implemented'get-file-revs' not implemented'get-locations' REPORT not implemented'get-locations' not implemented'incremental' option only valid in XML mode'stat' not implemented'verbose' option invalid in XML mode'with-all-revprops' option only valid in XML mode'with-revprop' option only valid in XML mode(R)eject or accept (t)emporarily? (R)eject, accept (t)emporarily or accept (p)ermanently? (local)(no author)(no date)* Dumped revision %ld. * Verified revision %ld. --- Merging r%ld into '%s': --- Merging r%ld through r%ld into '%s': --- Reverse-merging r%ld into '%s': --- Reverse-merging r%ld through r%ld into '%s': --This line, and those below, will be ignored----auto-props and --no-auto-props are mutually exclusive--relocate and --depth are mutually exclusive.merge-left.r%ld.merge-right.r%ld.working; run 'svn update' to complete it<<< Started new transaction, based on original revision %ld is missing ancestryA MERGE response for '%s' is not a child of the destination ('%s')A checksum mismatch occurredA conflict in the working copy obstructs the current operationA log message was given where none was necessaryA path under version control is needed for this operationA report cannot be generated because no data was suppliedA repository hook failedA representation vanished or changed between readsA working copy merge source needs an explicit revisionARG (some commands also take ARG1:ARG2 range) A revision argument can be one of: NUMBER revision number '{' DATE '}' revision at start of the date 'HEAD' latest in repository 'BASE' base rev of item's working copy 'COMMITTED' last commit at or before BASE 'PREV' revision just before COMMITTEDAborting commit: '%s' remains in conflictAccess scheme mixtures not yet supported ('%s' and '%s')Activity not foundAddedAdding %s Adding (bin) %s Adding a directory failed: %s on %s (%d)All authentication providers exhaustedApache got a malformed URIApache has no path to an SVN filesystemApply-textdelta already activeApply-textdelta not activeAre all the targets part of the same working copy?Argument to --limit must be positiveAt least one property change failed; repository is unchangedAt least one revision must be non-local for a pegged diffAt revision %ld. Attempt to change immutable filesystem nodeAttempt to deltify '%s' against itselfAttempt to pop empty WC unwind stackAttempt to remove or recreate fs root dirAttempt to set wc property '%s' on '%s' in a non-commit operationAttempt to unlock with non-empty unwind stackAttempted command in administrative dirAttempted removal of immutable nodeAttempted to clone child of non-mutable nodeAttempted to create a node with an illegal name '%s'Attempted to create entry in non-directory parentAttempted to create entry that already existsAttempted to delete a node with an illegal name '%s'Attempted to delete entry '%s' from *non*-directory nodeAttempted to delete entry '%s' from immutable directory nodeAttempted to get checksum of a *non*-file nodeAttempted to get length of a *non*-file nodeAttempted to get textual contents of a *non*-file nodeAttempted to lock an already-locked dirAttempted to make a child clone with an illegal name '%s'Attempted to open node with an illegal name '%s'Attempted to open non-existent child node '%s'Attempted to set entry in immutable nodeAttempted to set entry in non-directory nodeAttempted to set textual contents of a *non*-file nodeAttempted to set textual contents of an immutable nodeAttempted to write to non-transactionAttempting restricted operation for modified resourceAttempting to commit to a URL more than onceAuthentication error from server: %sAuthentication failedAuthentication realm: %s Author name cannot contain a newlineAuthorization failedBad URL passed to RA layerBad database version: compiled with %d.%d.%d, running against %d.%d.%dBad database version: got %d.%d.%d, should be at least %d.%d.%dBad merge; ancestor, source, and target not all in same fsBad merge; target '%s' has id '%s', same as ancestorBad parent pool passed to svn_make_pool()Bad property nameBad property name: '%s'Base checksum mismatch on '%s': expected: %s actual: %s Baseline incorrectBerkeley DB deadlock errorBerkeley DB errorBerkeley DB error for filesystem '%s' while %s: Berkeley DB error for filesystem '%s' while closing environment: Berkeley DB error for filesystem '%s' while creating environment: Berkeley DB error for filesystem '%s' while opening environment: Bogus URLBogus dateBogus filenameBogus mime-typeBogus revision information givenBogus revision reportCan't accept client connectionCan't add '%s' to a parent directory scheduled for deletionCan't add '%s' to deleted directory; try undeleting its parent directory firstCan't allocate FS mutexCan't append '%s' to '%s'Can't bind server socketCan't calculate requested dateCan't calculate the request body sizeCan't change perms of file '%s'Can't change working directory to '%s'Can't check directory '%s'Can't check path '%s'Can't chmod '%s'Can't close directory '%s'Can't close file '%s'Can't close prototype revision lockfile for transaction '%s'Can't close streamCan't connect to host '%s'Can't convert module path to UTF-8 from UCS-2: '%s'Can't convert string from '%s' to '%s':Can't convert string from '%s' to native encoding:Can't convert string from native encoding to '%s':Can't convert string to UCS-2: '%s'Can't copy '%s' to '%s'Can't create FSFS txn list mutexCan't create FSFS write-lock mutexCan't create a character converter from '%s' to '%s'Can't create a character converter from '%s' to native encodingCan't create a character converter from native encoding to '%s'Can't create directory '%s'Can't create null stdout for hook '%s'Can't create pipe for hook '%s'Can't create process '%s' attributesCan't create server socketCan't create symbolic link '%s'Can't create threadCan't create threadattrCan't create tunnelCan't detect MIME type of non-file '%s'Can't determine the native path encodingCan't expand timeCan't fetch FSFS shared dataCan't find a temporary directoryCan't find a working copy pathCan't find an entryCan't find parent directory's entry while trying to add '%s'Can't flush file '%s'Can't flush file to diskCan't flush streamCan't get address infoCan't get attribute information from file '%s'Can't get attribute information from streamCan't get default file perms for file at '%s' (file stat error)Can't get entries of non-directoryCan't get exclusive lock on file '%s'Can't get file nameCan't get file perms for file at '%s' (file stat error)Can't get hostnameCan't get local hostnameCan't get module file nameCan't get passwordCan't get shared lock on file '%s'Can't get socket timeoutCan't get username or passwordCan't get working directoryCan't grab DSO mutexCan't grab FS mutexCan't grab FSFS txn list mutexCan't hide directory '%s'Can't lock charset translation mutexCan't make directory '%s'Can't make pipe read handle non-inherited for hook '%s'Can't make pipe write handle non-inherited for hook '%s'Can't manipulate current dateCan't move '%s' to '%s'Can't move source to destCan't open '%s'Can't open directory '%s'Can't open file '%s'Can't open file at '%s'Can't open stderrCan't open stdinCan't open stdio fileCan't open stdoutCan't parse lock/entries hashfile '%s'Can't read contents of linkCan't read directoryCan't read directory '%s'Can't read directory entry in '%s'Can't read file '%s'Can't read first line of format file '%s'Can't read from connectionCan't read length line in file '%s'Can't read length line in streamCan't read stdinCan't read streamCan't recode error string from APRCan't remove '%s'Can't remove directory '%s'Can't remove file '%s'Can't replace '%s' in deleted directory; try undeleting its parent directory firstCan't replace '%s' with a node of a differing type; the deletion must be committed and the parent updated before adding '%s'Can't restore working directoryCan't rewind directory '%s'Can't set access time of '%s'Can't set detached stateCan't set file '%s' read-onlyCan't set file '%s' read-writeCan't set permissions on '%s'Can't set position pointer in file '%s'Can't set position pointer in streamCan't set process '%s' child errfileCan't set process '%s' child errfile for error handlerCan't set process '%s' child inputCan't set process '%s' child outfileCan't set process '%s' cmdtypeCan't set process '%s' directoryCan't set process '%s' error handlerCan't set proplist on *immutable* node-revision %sCan't set text contents of a directoryCan't specify -c with --oldCan't start process '%s'Can't stat '%s'Can't store FSFS shared dataCan't tokenize command '%s'Can't ungrab DSO mutexCan't ungrab FS mutexCan't ungrab FSFS txn list mutexCan't unlock charset translation mutexCan't unlock nonlocked transaction '%s'Can't unlock prototype revision lockfile for transaction '%s'Can't unlock unknown transaction '%s'Can't write to '%s'Can't write to connectionCan't write to file '%s'Can't write to streamCannot calculate blame information for binary file '%s'Cannot change node kindCannot commit both '%s' and '%s' as they refer to the same URLCannot compare file contents between two different filesystemsCannot compare property value between two different filesystemsCannot copy between two different filesystems ('%s' and '%s')Cannot copy or move '%s': it is not in the repository yet; try committing firstCannot copy path '%s' into its own child '%s'Cannot copy revprops for a revision (%ld) that has not been synchronized yetCannot copy to '%s' as it is scheduled for deletionCannot copy to '%s', as it is not from repository '%s'; it is from '%s'Cannot display: file marked as a binary type.%sCannot find a URL for '%s'Cannot initialize a repository with content in itCannot invoke editor to get log message when non-interactiveCannot mix repository and working copy sourcesCannot modify transaction named '%s' in filesystem '%s'Cannot move URL '%s' into itselfCannot move path '%s' into itselfCannot negotiate authentication mechanismCannot replace a directory from withinCannot revert '%s': unsupported entry node kindCannot revert '%s': unsupported node kind in working copyCannot revert addition of current directory; please try again from the parent directoryCannot set '%s' on a directory ('%s')Cannot set '%s' on a file ('%s')Cannot specify revision for deleting versioned property '%s'Cannot specify revision for editing versioned property '%s'Cannot specify revision for setting versioned property '%s'Cannot specify revisions (except HEAD) with move operationsCannot unlock path '%s', no authenticated username availableCannot use --username or --password with any of --source-username, --source-password, --sync-username, or --sync-password. Cannot verify lock on path '%s'; no matching lock-token availableCannot verify lock on path '%s'; no username availableCannot write lock/entries hashfile '%s'Cannot write property hash for '%s'Cannot write to the prototype revision file of transaction '%s' because a previous representation is currently being written by another processCannot write to the prototype revision file of transaction '%s' because a previous representation is currently being written by this processCapability entry is not a wordCaught signalCease invocation of this APICertificate information: - Hostname: %s - Valid: from %s until %s - Issuer: %s - Fingerprint: %s Changed paths: Changed-path entry not a listChangelist doesn't matchChangelist: %s Checked out external at revision %ld. Checked out revision %ld. Checkout complete. Checksum mismatch for '%s': expected checksum: %s actual checksum: %s Checksum mismatch for '%s'; expected: '%s', actual: '%s'Checksum mismatch for '%s'; recorded: '%s', actual: '%s'Checksum mismatch for resulting fulltext (%s): expected checksum: %s actual checksum: %s Checksum mismatch indicates corrupt text base: '%s' expected: %s actual: %s Checksum mismatch on rep '%s': expected: %s actual: %s Checksum mismatch while reading representation: expected: %s actual: %s Checksum mismatch, file '%s': expected: %s actual: %s Checksum mismatch, rep '%s': expected: %s actual: %s Checksum: %s Client certificate filename: Client/server version mismatchCommand 'finish-replay' invalid outside of replaysCommit an unversioned file or tree into the repository. usage: import [PATH] URL Recursively commit a copy of PATH to URL. If PATH is omitted '.' is assumed. Parent directories are created as necessary in the repository. If PATH is a directory, the contents of the directory are added directly under URL. Unversionable items such as device files and pipes are ignored if --force is specified. Commit created rev %ld but should have created %ldCommit failed (details follow):Commit item '%s' has copy flag but an invalid revisionCommit item '%s' has copy flag but no copyfrom URLCommit succeeded, but other errors follow:Commit succeeded, but post-commit hook failedCommitted revision %ld. Committing in directory scheduled for additionCompression of svndiff data failedConfig error: invalid integer value '%s'Conflict Current Base File: %s Conflict Previous Base File: %s Conflict Previous Working File: %s Conflict Properties File: %s Conflict at '%s'Conflict discovered in '%s'. Conflict discovered when trying to add '%s'. An object of the same name already exists. Conflict resolution failedCopied From Rev: %ld Copied From URL: %s Copied properties for revision %ld (%s* properties skipped). Copied properties for revision %ld. Copied: %s (from rev %ld, %s) Copy from mutable tree not currently supportedCopyfrom-url '%s' has different repository root than '%s'Copying from transactions not allowedCorrupt DB: faulty predecessor countCorrupt DB: initial copy id not '0' in filesystem '%s'Corrupt DB: initial revision number is not '0' in filesystem '%s'Corrupt DB: initial transaction id not '0' in filesystem '%s'Corrupt current fileCorrupt entry in 'copies' table for '%s' in filesystem '%s'Corrupt entry in 'transactions' table for '%s' in filesystem '%s'Corrupt filesystem revision %ld in filesystem '%s'Corrupt lock in 'locks' table for '%s' in filesystem '%s'Corrupt lockfile for path '%s' in filesystem '%s'Corrupt node-id in node-revCorruption detected whilst reading delta chain from representation '%s' to '%s'Could not create top-level directoryCould not fetch the Version Resource URL (needed during an import or when it is missing from the local, cached props)Could not find end of line in range list line in '%s'Could not get content-type from responseCould not initialize the SASL libraryCould not lookup hostname `%s'Could not obtain the list of SASL mechanismsCould not save fileCould not save the URL of the version resourceCould not use external editor to fetch log message; consider setting the $SVN_EDITOR environment variable or using the --message (-m) or --file (-F) optionsCould not write svndiff to temp fileCouldn't determine absolute path of '%s'Couldn't do property mergeCouldn't find a repositoryCouldn't obtain the authenticated usernameCouldn't open a repositoryCouldn't open logCreate a new directory under version control. usage: 1. mkdir PATH... 2. mkdir URL... Create version controlled directories. 1. Each directory specified by a working copy PATH is created locally and scheduled for addition upon the next commit. 2. Each directory specified by a URL is created in the repository via an immediate commit. In both cases, all the intermediate directories must already exist, unless the --parents option is given. Create an unversioned copy of a tree. usage: 1. export [-r REV] URL[@PEGREV] [PATH] 2. export [-r REV] PATH1[@PEGREV] [PATH2] 1. Exports a clean directory tree from the repository specified by URL, at revision REV if it is given, otherwise at HEAD, into PATH. If PATH is omitted, the last component of the URL is used for the local directory name. 2. Exports a clean directory tree from the working copy specified by PATH1, at revision REV if it is given, otherwise at WORKING, into PATH2. If PATH2 is omitted, the last component of the PATH1 is used for the local directory name. If REV is not specified, all local changes will be preserved. Files not under version control will not be copied. If specified, PEGREV determines in which revision the target is first looked up. Created: %s Creating DAV sandbox dirCreating authz fileCreating conf directoryCreating db lock fileCreating db logs lock fileCreating hook directoryCreating lock dirCreating passwd fileCreating post-commit hookCreating post-revprop-change hookCreating pre-commit hookCreating pre-revprop-change hookCreating start-commit hookCreating svnserve.conf fileCredential data unavailableDAV request failed; it's possible that the repository's pre-revprop-change hook either failed or is non-existentData cannot be safely XML-escapedDecompression of svndiff data failedDefault entry has no revision numberDefault entry is missing URLDefault: '-u'. When Subversion is invoking an external diff program, ARG is simply passed along to the program. But when Subversion is using its default internal diff implementation, or when Subversion is displaying blame annotations, ARG could be any of the following: -u (--unified): Output 3 lines of unified context. -b (--ignore-space-change): Ignore changes in the amount of white space. -w (--ignore-all-space): Ignore all white space. --ignore-eol-style: Ignore changes in EOL styleDelete failed: directory has no entry '%s'DeletedDeleting %s Delta does not contain enough new dataDelta does not fill the target windowDelta property block detected - not supported by svndumpfilterDeltifying revision %ld...Depth: INVALID Depth: empty Depth: files Depth: immediates Describe the usage of this program or its subcommands. usage: help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svndumpfilter help [SUBCOMMAND...] Destination '%s' already existsDestination '%s' is not a directoryDestination HEAD (%ld) is not the last merged revision (%ld); have you committed to the destination without using svnsync?Destination directory exists, and will not be overwritten unless forcedDestination directory exists; please remove the directory or use --force to overwriteDestination repository has not been initializedDestination repository is already synchronizing from '%s'Did not expect '%s' to be a working copy rootDidn't receive end marker for lock responsesDidn't receive end marker for unlock responsesDiff data source modified unexpectedlyDiff version inconsistencies in representation '%s'Directory '%s' containing working copy admin area is missingDirectory '%s' has no THIS_DIR entryDirectory '%s' has no URLDirectory '%s' is missingDirectory entry corruptDirectory needs to be empty but is notDirlist element not a listDisabled repository featureDo not display filtering statistics.Don't filter revision properties.Dump stream contains a malformed header (with no ':') at '%.20s'Dump stream contains a malformed header (with no value) at '%.20s'Dumpstream data appears to be malformedEither a URL or versioned item is requiredEmpty error listEnd revision %ld is invalid (youngest revision is %ld)Entry '%s' has illegal scheduleEntry '%s' has invalid '%s' valueEntry '%s' has invalid node kindEntry '%s' has no URLEntry '%s' has unexpectedly changed special statusEntry '%s' is already under version controlEntry already existsEntry for '%s' exists (though the working file is missing)Entry for '%s' has invalid repository rootEntry for '%s' has no URLEntry for '%s' is marked as 'copied' but is not itself scheduled for addition. Perhaps you're committing a target that is inside an unversioned (or not-yet-versioned) directory?Entry has an invalid attributeEntry has no URLEntry has no revisionError aborting reportError at entry %d in entries file for '%s':Error bumping revisions post-commit (details follow):Error calling external programError closing directory '%s'Error closing filesystemError closing null fileError closing read end of stderr pipeError closing write end of stderr pipeError comparing '%s' and '%s'Error during add of '%s'Error during recursive copy of '%s'Error getting 'affected time' for '%s'Error getting 'affected time' of '%s'Error getting 'affected time' on '%s'Error getting UID of processError getting file size on '%s'Error in child process: %sError in post-commit clean-up (details follow):Error initializing command line argumentsError modifying entry for '%s'Error modifying entry of '%s'Error normalizing edited contents to internal formatError normalizing log message to internal formatError opening db lockfileError parsing %s property on '%s': '%s'Error parsing '%s'Error parsing argumentsError parsing diff optionsError parsing revision numberError processing command '%s' in '%s'Error reading changes for key '%s'Error reading spooled %s request responseError removing changelist from entry '%s'Error removing lock from entry for '%s'Error replacing text-base of '%s'Error resolving case of '%s'Error restoring text for '%s'Error retrieving REPORT (%d)Error running '%s': exitcode was %d, args were: in directory '%s', basenames: %s %s %sError running post-commit hookError running post-lock hookError running post-unlock hookError setting property '%s': Error unlocking locked dirs (details follow):Error validating server certificate for '%s': Error waiting for process '%s'Error writing entries file for '%s'Error writing hash to '%s'Error writing log for '%s'Error writing stream: unexpected EOFError writing to '%s'Error writing to '%s': unexpected EOFExactly one file argument requiredExactly one property name and one file argument requiredExcluding (and dropping empty revisions for) prefixes: Excluding prefixes: Expected '%s' to be a directory but found a fileExpected '%s' to be a file but found a directoryExpected FS format '%d'; found format '%d'Expected FS format between '1' and '%d'; found format '%d'Expected a valid revnum and pathExpected repository format '%d' or '%d'; found format '%d'Expires: %s Explicit target argument requiredExplicit target required ('%s' interpreted as prop value)Export complete. Exported external at revision %ld. Exported revision %ld. External at revision %ld. External checkout complete. External export complete. External update complete. Failed to add directory '%s': a non-directory object of the same name already existsFailed to add directory '%s': a versioned directory of the same name already existsFailed to add directory '%s': an unversioned directory of the same name already existsFailed to add directory '%s': copyfrom arguments not yet supportedFailed to add directory '%s': object of the same name as the administrative directoryFailed to add file '%s': a non-file object of the same name already existsFailed to calculate MD5 digest for '%s'Failed to connect to Service Control ManagerFailed to create winservice_start_eventFailed to delete mmap '%s'Failed to execute WebDAV PROPPATCHFailed to fetch lock informationFailed to find label '%s' for URL '%s'Failed to find time on revision %ldFailed to get exclusive repository access; perhaps another process such as httpd, svnserve or svn has it open?Failed to get lock on destination repos, currently held by '%s' Failed to get new string keyFailed to load module for FS type '%s'Failed to load properties from diskFailed to mark '%s' absent: item of the same name is already scheduled for additionFailed to parse URI '%s'Failed to revert '%s' -- try updating instead. Failed to run '%s' hook; broken symlinkFailed to start '%s' hookFailed to write full amount to streamFailed writing updated fileFailure loading pluginFailure opening '%s'Failure reading rep '%s'File '%s' already existsFile '%s' has binary mime type propertyFile '%s' has inconsistent newlinesFile '%s' has local modificationsFile '%s' in directory '%s' is not a versioned resourceFilesystem directory has no such entryFilesystem has no itemFilesystem has no such copyFilesystem has no such lockFilesystem has no such node-rev-idFilesystem has no such representationFilesystem has no such stringFilesystem is already openFilesystem is corruptFilesystem is not openFilesystem object already openFilesystem object has not been opened yetFilesystem path '%s' is neither a file nor a directoryFilter out nodes with given prefixes from dumpstream. usage: svndumpfilter exclude PATH_PREFIX... Filter out nodes without given prefixes from dumpstream. usage: svndumpfilter include PATH_PREFIX... Final line in revision file longer than 64 charactersFinal line in revision file missing spaceFirst line of '%s' contains non-digitFirst revision cannot be higher than secondFormat file '%s' contains an unexpected non-digitFormat of an svn:externals property was invalidFound a working copy pathFound malformed header in revision fileFraming error in pipe protocolGeneral filesystem errorGot apply-textdelta element without preceding add-file or open-fileGot cdata content for a prop deleteGot close-directory element without ever opening a directoryGot close-file element without preceding add-file or open-fileGot source path but no source revision for '%s'Got unrecognized encoding '%s'HTTP Path Not FoundIllegal repository URL '%s'Illegal svn repository URL '%s'Illegal target for the requested operationImpossibly long repository root from serverIn directory '%s'Including (and dropping empty revisions for) prefixes: Including prefixes: Incompatible library versionIncomplete dataIncomplete lock data returnedIncomplete or unterminated property blockInconsistent line ending styleIncorrect arguments suppliedIncorrect parameters givenIndexInput/output errorInter-repository relocation not allowedInternal error: there is an unknown parent (%d) for the 'DAV:response' element within the MERGE responseInvalid 'conflict_result' argumentInvalid 'format' attributeInvalid URL '%s'Invalid URL: illegal character in proxy port numberInvalid URL: negative proxy port numberInvalid URL: proxy port number greater than maximum TCP port number 65535Invalid argument '%s' in diff optionsInvalid authz configurationInvalid change kind in rev fileInvalid change ordering: new node revision ID without deleteInvalid change ordering: non-add change on deleted pathInvalid change typeInvalid changes line in rev-fileInvalid character '%c' found in range listInvalid character '%c' found in revision listInvalid config: illegal character in debug mask valueInvalid config: illegal character in timeout valueInvalid config: negative timeout valueInvalid config: unable to load certificate file '%s'Invalid config: unknown http authtype '%s'Invalid configuration valueInvalid control character '0x%02x' in path '%s'Invalid copy source path '%s'Invalid creation date header value in response.Invalid diff stream: [new] insn %d overflows the new data sectionInvalid diff stream: [src] insn %d overflows the source viewInvalid diff stream: [tgt] insn %d starts beyond the target view positionInvalid diff stream: insn %d cannot be decodedInvalid diff stream: insn %d has non-positive lengthInvalid diff stream: insn %d overflows the target viewInvalid editor anchoring; at least one of the input paths is not a directory and there was no source entryInvalid end revision %ldInvalid entry terminatorInvalid escape sequenceInvalid escaped characterInvalid file or dir token during editInvalid filesystem path syntaxInvalid filesystem revision numberInvalid filesystem transaction nameInvalid lockInvalid operation on the current working directoryInvalid option. Invalid prop-mod flag in rev-fileInvalid relocationInvalid report for top level of working copyInvalid revision number (%ld)Invalid revision number found parsing '%s'Invalid revision number suppliedInvalid revision specifierInvalid scheduleInvalid server response to dated-rev requestInvalid start revision %ldInvalid switchInvalid target pathInvalid text-mod flag in rev-fileInvalid timeout valueInvalid value for field '%s'Invalid version line in entries file of '%s'Item already exists in filesystemItem is not readableItem is not writableItem is out of dateItem is partially readableLast Changed Author: %s Last Changed DateLast Changed Rev: %ld Left locally modified or unversioned filesLine endings other than expectedList all properties on files, dirs, or revisions. usage: 1. proplist [TARGET[@REV]...] 2. proplist --revprop -r REV [TARGET] 1. Lists versioned props. If specified, REV determines in which revision the target is first looked up. 2. Lists unversioned remote props on repos revision. TARGET only determines which repository to access. List directory entries in the repository. usage: list [TARGET[@REV]...] List each TARGET file and the contents of each TARGET directory as they exist in the repository. If TARGET is a working copy path, the corresponding repository URL will be used. If specified, REV determines in which revision the target is first looked up. The default TARGET is '.', meaning the repository URL of the current working directory. With --verbose, the following fields will be shown for each item: Revision number of the last commit Author of the last commit If locked, the letter 'O'. (Use 'svn info URL' to see details) Size (in bytes) Date and time of the last commit Local URL '%s' contains only a hostname, no pathLocal URL '%s' contains unsupported hostnameLocal URL '%s' does not contain 'file://' prefixLocal, non-commit operations do not take a log message or revision propertiesLocation entry not a listLock CreatedLock ExpiresLock Owner: %s Lock Token: %s Lock comment contains a zero byteLock comment contains illegal charactersLock comment file is a versioned file; use '--force-log' to overrideLock element not a listLock failed: newer version of '%s' existsLock file '%s' is not a regular fileLock has expiredLock request failed: %d %sLock response not a listLock token is incorrectLock working copy paths or URLs in the repository, so that no other user can commit changes to them. usage: lock TARGET... Use --force to steal the lock from another user or working copy. Log command for directory '%s' is mislocatedLog entry missing 'name' attribute (entry '%s' for directory '%s')Log entry not a listLog message contains a zero byteLog message file is a versioned file; use '--force-log' to overrideLog path entry not a stringLog revprop entry not a stringMD5 checksum is missingMIME type '%s' does not contain '/'MIME type '%s' has empty media typeMalformed URL for repositoryMalformed copyfrom line in node-revMalformed copyroot line in node-revMalformed dumpfile headerMalformed dumpstream: Revision 0 must not contain node recordsMalformed error listMalformed fileMalformed network dataMalformed representation headerMalformed skeleton dataMalformed stream dataMalformed svndiff data in representationMalformed text rep offset line in node-revMerge conflict during commitMismatch popping the WC unwind stackMismatched FS module version for '%s': found %d.%d.%d%s, expected %d.%d.%d%sMismatched RA version for '%s': found %d.%d.%d%s, expected %d.%d.%d%sMissing 'dest' attribute in '%s'Missing 'left' attribute in '%s'Missing 'revision' attribute for '%s'Missing 'right' attribute in '%s'Missing 'timestamp' attribute in '%s'Missing changed-path information for '%s' in revision %ldMissing cpath in node-revMissing default entryMissing end of line in wcprops file for '%s'Missing entry terminatorMissing kind field in node-revMissing name attr in %s elementMissing name attr in absent-directory elementMissing name attr in absent-file elementMissing name attr in add-directory elementMissing name attr in add-file elementMissing name attr in delete-entry elementMissing name attr in open-directory elementMissing name attr in open-file elementMissing name attr in revprop elementMissing node-id in node-revMissing path argumentMissing propname and repository path argumentsMissing propname argumentMissing propname or repository path argumentMissing repository path argumentMissing required node revision IDMissing required revision specificationMissing revisionMissing revision attr in delete-entry elementMissing revision attr in open-directory elementMissing revision attr in open-file elementMissing revision attr in open-root elementMissing revision attr in target-revision elementModifiedModule for accessing a repository on local disk.Module for accessing a repository using the svn network protocol.Module for accessing a repository via WebDAV protocol using Neon.Module for accessing a repository via WebDAV protocol using serf.Module for working with a Berkeley DB repository.Module for working with a plain file (FSFS) repository.Moves between the working copy and the repository are not supportedMultiple revision arguments encountered; can't specify -c twice, or both -c and -rMultiple revision arguments encountered; try '-r N:M' instead of '-r N -r M'Must specify the revision as a number, a date or 'HEAD' when operating on a revision propertyMutually exclusive arguments specifiedName does not refer to a filesystem directoryName does not refer to a filesystem fileName is not a single path componentName: %s Negative expiration date passed to svn_fs_lockNegative revision number found parsing '%s'Neon was unable to parse URL '%s'Network connection closed unexpectedlyNetwork read/write errorNetwork socket initialization failedNew entry name required when importing a fileNo '.' entry in: '%s'No auth file path availableNo authentication provider availableNo changes to property '%s' on '%s' No changes to property '%s' on revision %ld No commits in repositoryNo common parent found, unable to operate on disjoint argumentsNo copy with id '%s' in filesystem '%s'No default entry in directory '%s'No external editor availableNo external merge tool availableNo lock token providedNo part of path '%s' was found in repository HEADNo such XML tag attributeNo such entry: '%s'No such representation '%s'No such revision %ldNo such transactionNo token given for path '%s' in filesystem '%s'No transaction named '%s' in filesystem '%s'No user associated with filesystemNo valid copyfrom revision in filtered streamNo versioned parent directoriesNo write-lock in '%s'Node Kind: directory Node Kind: file Node Kind: none Node Kind: unknown Non-ASCII character (code %d) detected, and unable to convert to/from UTF-8Non-numeric limit argument givenNon-string as part of file contentsNot all required revisions are specifiedNot authorized to open root of edit operationNot enough arguments providedNull rep, but offset past zero alreadyNumber is larger than maximumObject is not a revision rootObject is not a transaction rootObstructed updateOnly diffs between a path's text-base and its working files are supported at this timeOnly one revision allowedOnly relative paths can be specified after a URLOperation does not apply to binary fileOperation does not apply to directoryOperation does not support multiple sourcesOption --tunnel-user is only valid in tunnel mode. Output the content of specified files or URLs with revision and author information in-line. usage: blame TARGET[@REV]... If specified, REV determines in which revision the target is first looked up. Output the content of specified files or URLs. usage: cat TARGET[@REV]... If specified, REV determines in which revision the target is first looked up. Owner: %s Passphrase for '%s': Password for '%s': Path '%s' already existsPath '%s' does not existPath '%s' does not exist in revision %ldPath '%s' doesn't exist in HEAD revisionPath '%s' doesn't exist in revision %ldPath '%s' ends in '%s', which is unsupported for this operationPath '%s' has no committed revisionPath '%s' is no longer a member of a changelist. Path '%s' is not a URLPath '%s' is not a directoryPath '%s' is not a filePath '%s' is not in the working copyPath '%s' is now a member of changelist '%s'. Path '%s' isn't locked. Path '%s' not found in head revisionPath '%s' not found in revision %ldPath '%s' not presentPath has no lock tokenPath is already lockedPath is not a stringPath is not a working copy directoryPath is not a working copy filePath is not lockedPath syntax not supported in this contextPath: %s Pathname not terminated by ':'Premature EOF seen from serverPremature end of content data in dumpstreamProblem on first log entry in a working copyProblem running logProcess '%s' failed (exitwhy %d)Process '%s' returned error exitcode %dProp diffs element not a listProperties on '%s': Property '%s' is an entry propertyProperty '%s' is not a regular propertyProperty '%s' not found on path '%s' in revision %ldProperty '%s' not found on path '%s' in transaction %sProperty '%s' not found on revision %ldProperty not foundProplist element not a listProtocol error: the MERGE response for the '%s' resource did not return all of the properties that we asked for (and need to complete the commit)Protocol error: we told the server not to auto-merge any resources, but it said that '%s' was mergedPut files and directories under version control, scheduling them for addition to repository. They will be added in next commit. usage: add PATH... Python exception has been set with the errorRA layer didn't receive requested OPTIONS infoRA layer failed to create HTTP requestRA layer failed to fetch propertiesRA layer failed to init socket layerRA layer file already existsRA layer request failedREPORT response handling failed to complete the editor driveREVISION PATH -------- ---- REVISION PATH -------- --------- Ran out of unique namesRange list parsing ended before hitting newlineRead access denied for root of editRead error in pipeReading '%s'Reading from stdin is disallowedReading one svndiff window read beyond the end of the representationRecovery encountered a deltified directory representationRecovery encountered a non-directory nodeRecursively clean up the working copy, removing locks, resuming unfinished operations, etc. usage: cleanup [PATH...] Reference to non-existent node '%s' in filesystem '%s'Relative source revision %ld is not available in current repositoryRelocate can only change the repository part of an URLRemove a property from files, dirs, or revisions. usage: 1. propdel PROPNAME [PATH...] 2. propdel PROPNAME --revprop -r REV [TARGET] 1. Removes versioned props in working copy. 2. Removes unversioned remote prop on repos revision. TARGET only determines which repository to access. Remove files and directories from version control. usage: 1. delete PATH... 2. delete URL... 1. Each item specified by a PATH is scheduled for deletion upon the next commit. Files, and directories that have not been committed, are immediately removed from the working copy unless the --keep-local option is given. PATHs that are, or contain, unversioned or modified items will not be removed unless the --force option is given. 2. Each item specified by a URL is deleted from the repository via an immediate commit. Remove revisions emptied by filtering.Removed lock on '%s'. Removing '%s' from changelist '%s'.Renumber revisions left after filtering.Rep '%s' both mutable and non-fulltextRep '%s' is not mutableRep contents are too large: got %s, limit is %sReplacing %s Repository Root: %s Repository URL required when importingRepository UUID: %s Repository access is needed for this operationRepository access method not implementedRepository argument requiredRepository argument required Repository creation failedRepository has been movedRepository has no UUIDRepository has not been enabled to accept revision propchanges; ask the administrator to create a pre-revprop-change hookRepository lock acquired. Please wait; recovering the repository may take some time... Repository moved permanently to '%s'; please relocateRepository moved temporarily to '%s'; please relocateRepresentation is being writtenRepresentation is not of type 'delta'Resolved conflicted state of '%s' Restore pristine working copy file (undo most local edits). usage: revert PATH... Note: this subcommand does not require network access, and resolves any conflicted states. However, it does not restore removed directories. Restored '%s' Reverted '%s' Revision %ld committed as %ld. Revision %ld doesn't match existing revision %ld in '%s'Revision %ld skipped. Revision being currently copied (%ld), last merged revision (%ld), and destination HEAD (%ld) are inconsistent; have you committed to the destination without using svnsync?Revision entry not a listRevision file lacks trailing newlineRevision property '%s' not allowed in this contextRevision property pair is emptyRevision range is not allowedRevision type requires a working copy path, not a URLRevision: %ld Revisions must not be greater than the youngest revision (%ld)Revisions renumbered as follows: SQLite errorSSL is not supportedSafe data '%s' was followed by non-ASCII byte %d: unable to convert to/from UTF-8Schedule: add Schedule: delete Schedule: normal Schedule: replace Second revision requiredSend changes from your working copy to the repository. usage: commit [PATH...] A log message must be provided, but it can be empty. If it is not given by a --message or --file option, an editor will be started. If any targets are (or contain) locked items, those will be unlocked after a successful commit. Sending %s Server did not send repository rootServer does not support custom revprops via logServer does not support date-based operationsServer does not support edit pipeliningServer does not support locking featuresServer does not support retrieving information about the repository rootServer doesn't support setting arbitrary revision properties during commitServer doesn't support the get-lock commandServer doesn't support the lock commandServer doesn't support the replay commandServer doesn't support the unlock commandServer only supports versions up to %dServer requires minimum version %dServer response missing the expected deadprop-count propertyServer sent unexpected return value (%d %s) in response to %s request for '%s'Session is rooted at '%s' but the repos root is '%s'Set new value for property '%s' on '%s' Set new value for property '%s' on revision %ld Setting property '%s' on non-local target '%s' is not supportedSetting property on non-local target '%s' needs a base revisionSetting property recursively on non-local target '%s' is not supportedSize of uncompressed data does not match stored original lengthSkipped '%s' Skipped missing target: '%s' Skipping binary file: '%s' Something is wrong with the log message's contentsSorry, svn_client_diff4 was called in a way that is not yet supportedSource '%s' is not a directorySource URL '%s' is from foreign repository; leaving it as a disjoint WCSource and dest appear not to be in the same repository (src: '%s'; dst: '%s')Source url '%s' is from different repositorySpecial code for wrapping server errors to report to clientStandard properties can't be set explicitly as revision propertiesStart revision %ld is greater than end revision %ldStart revision must precede end revisionStatus against revision: %6ld Storage of non-regular property '%s' is disallowed through the repository interface, and could indicate a bug in your clientString does not represent a node or node-rev-idString length larger than maximumSubcommand '%s' doesn't accept option '%s' Type 'svn help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnadmin help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svndumpfilter help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnlook help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnsync help %s' for usage. Subcommand argument required Subversion is a tool for version control. For additional information, see http://subversion.tigris.org/ Successful edit status returned too soonSuccessor id '%s' (for '%s') already exists in filesystem '%s'Sum of subblock sizes larger than total block content lengthSummarizing diff can only compare repository to repositorySvndiff compressed data is invalidSvndiff contains corrupt window headerSvndiff data contains backward-sliding source viewSvndiff data contains corrupt windowSvndiff data contains invalid instructionSvndiff data ends unexpectedlySvndiff data has invalid headerSvndiff has backwards-sliding source viewsSvndiff has invalid headerSvndiff source length inconsistencySymbolic links are not supported on this platformSyntax error in native-eol argument '%s'Syntax error in revision argument '%s'Syntax error parsing revision '%s'Target lists to diff may not contain both working copy paths and URLsTest failedText Last UpdatedText delta chunk not a stringThe %s request returned invalid XML in the response: %s (%s)The CHECKOUT response did not contain a 'Location:' headerThe EDITOR, SVN_EDITOR or VISUAL environment variable or 'editor-cmd' run-time configuration option is empty or consists solely of whitespace. Expected a shell command.The MERGE property response had an error statusThe OPTIONS response did not include the requested activity-collection-set; this often means that the URL is not WebDAV-enabledThe URL '%s' has a different repository root than its parentThe UUID property was not found on the resource or any of its parentsThe VCC property was not found on the resourceThe file '%s' changed unexpectedly during diffThe file-revs report didn't contain any revisionsThe following repository access (RA) modules are available: The following repository back-end (FS) modules are available: The generated transaction name is too longThe get-file-revs command didn't return any revisionsThe latest repos revision is %ld. The location for '%s' for revision %ld does not exist in the repository or refers to an unrelated objectThe lock comment is a pathname (was -F intended?); use '--force-log' to overrideThe log message file is under version controlThe log message is a pathnameThe log message is a pathname (was -F intended?); use '--force-log' to overrideThe operation was interruptedThe path was not part of a repositoryThe relative-path property was not found on the resourceThe repository at '%s' has uuid '%s', but the WC has '%s'The repository is locked, perhaps for db recoveryThe request response contained at least one errorThe response contains a non-conforming HTTP status lineThe root directory cannot be deletedThe service failed to startThe service failed to start; an internal error occurred while starting the serviceThe specified diff option is not supportedThe specified transaction is not mutableThere is already a versioned item '%s'There is no change 0This is an empty revision for padding.To turn off the %s property, use 'svn propdel'; setting the property to '%s' will not turn it off.Token '%s' does not point to any existing lock in filesystem '%s'Too many arguments givenToo many arguments to import commandToo many nested itemsTransaction '%s' is not based on a revision; how oddTransaction '%s' removed. Transaction aborted, but cleanup failedTransaction cleanup failedTransaction is deadTransaction is dead: '%s'Transaction is not deadTransaction is not dead: '%s'Transaction is out of dateTransaction out of dateTransmitting file data Tried a versioning operation on an unversioned resourceTried to change an immutable representationTry 'svn add' or 'svn add --non-recursive' instead?Try 'svn help' for more infoTry 'svn mkdir --parents' instead?Try 'svnadmin help' for more infoTry 'svndumpfilter help' for more infoTry 'svnlook help' for more infoTry 'svnsync help' for more infoTrying to add new property '%s' with value '%s', but property already exists with value '%s'.Trying to change property '%s' from '%s' to '%s', but it has been locally deleted.Trying to change property '%s' from '%s' to '%s', but property already exists with value '%s'.Trying to change property '%s' from '%s' to '%s', but the property does not exist.Trying to create property '%s' with value '%s', but it has been locally deleted.Trying to delete property '%s' with value '%s' but it has been modified from '%s' to '%s'.Trying to delete property '%s' with value '%s' but the local value is '%s'.Trying to use an unsupported featureTunnel scheme %s requires environment variable %s to be definedTwo top-level reports with no targetTwo versioned resources are unrelatedType '%s --help' for usage. Type '%s help' for usage. Type 'svnversion --help' for usage. URL '%s' contains a '..' elementURL '%s' doesn't existURL '%s' doesn't match existing URL '%s' in '%s'URL '%s' is not a child of repository root URL '%s'URL '%s' is not properly URI-encodedURL '%s' non-existent in revision %ldURL '%s' non-existent in that revisionURL '%s' refers to a directoryURL '%s' refers to a file, not a directoryURL has no scheme: '%s'URL: %s URLs have no scheme ('%s' and '%s')UUID Token: %s Unable to check path existence for '%s'Unable to create transaction directory in '%s' for revision %ldUnable to extract data from response headerUnable to find repository location for '%s' in revision %ldUnable to locate auth fileUnable to lock '%s'Unable to lock/unlock across multiple repositoriesUnable to make any directoriesUnable to make name for '%s'Unable to open an ra_local session to URLUnable to open auth file for readingUnable to open auth file for writingUnable to open repository '%s'Unable to open root of editUnable to parse URL '%s'Undefined tunnel scheme '%s'Unexpected EOF on streamUnexpected EOF writing contentsUnexpected end of entryUnexpected end of svndiff inputUnexpected immutable node at '%s'Unexpected node kind foundUnexpected or unknown property kindUnexpected server response to authenticationUnexpectedly found '%s': path is marked 'missing'Unknown FS typeUnknown FS type '%s'Unknown XML encoding: '%s'Unknown authorization methodUnknown changelistUnknown command '%s'Unknown command: '%s' Unknown entry kind for '%s'Unknown hostname '%s'Unknown node kind for '%s'Unknown node kind for representation '%s'Unknown or unexpected kind for path '%s'Unknown or unversionable type for '%s'Unknown revprop word '%s' in log commandUnknown status '%s' in command responseUnknown status for lock commandUnknown status for unlock commandUnknown svn protocol commandUnknown svn_node_kindUnlock request failed: %d %sUnlock response not a listUnlock succeeded, but post-unlock hook failedUnlock working copy paths or URLs. usage: unlock TARGET... Use --force to break the lock. Unmergeable scheduling requested on an entryUnreadable path encountered; access deniedUnrecognized URL scheme '%s'Unrecognized URL scheme for '%s'Unrecognized binary data encoding; can't decodeUnrecognized line ending styleUnrecognized logfile element '%s' in '%s'Unrecognized node kind: '%s'Unrecognized node-action on node '%s'Unrecognized record type in streamUnrecognized revision type requested for '%s'Unrecognized stream dataUnspecified error messageUnsupported FS formatUnsupported FS loader version (%d) for bdbUnsupported FS loader version (%d) for fsfsUnsupported RA loader version (%d) for ra_localUnsupported RA loader version (%d) for ra_neonUnsupported RA loader version (%d) for ra_serfUnsupported RA loader version (%d) for ra_svnUnsupported RA plugin ABI versionUnsupported dumpfile version: %dUnsupported node kind for path '%s'Unsupported report depth '%s'Unsupported repository versionUnsupported working copy formatUnversioned properties on revision %ld: Update complete. Updated external to revision %ld. Updated to revision %ld. Use --force to override this restrictionUse of two URLs is not compatible with mergeinfo modificationUser %s does not own lock on path '%s' (currently locked by %s)Username does not match lock ownerUsername: Valid UTF-8 data (hex:%s) followed by invalid UTF-8 sequence (hex:%s)Value will not be set unless forcedVersion file format not correctVersion mismatch in '%s': found %d.%d.%d%s, expected %d.%d.%d%sWARNING: Referencing data in revision %ld, which is older than the oldest WARNING: dumped revision (%ld). Loading this dump into an empty repository WARNING: will fail. Waiting on repository lock; perhaps another process has it open? When specifying working copy paths, only one target may be givenWhile preparing '%s' for commitWorking copy '%s' is not lockedWorking copy '%s' lockedWorking copy format of '%s' is too old (%d); please check out your working copy againWorking copy is corruptWorking copy is not up-to-dateWorking copy not locked; this is probably a bug, please reportWorking copy path '%s' does not exist in repositoryWorking copy text base is corruptWrite denied: not authorized to read all of revision %ldWrite errorWrite-lock stolen in '%s'Wrong number of targets specifiedWrong or unexpected property valueXML data was not well-formedXML parser failed in '%s'You must specify exactly one of -d, -i, -t or -X. Your .svn/tmp directory may be missing or corrupt; run 'svn cleanup' and try againYour commit message was left in a temporary file:[Error output could not be read.][Error output could not be translated from the native locale to UTF-8.]add intermediate parentsallocating new copy ID (getting 'next-key')allocating new node ID (getting 'next-key')allocating new representation (getting next-key)authorization failedbe verboseblame of the WORKING revision is not supportedbumping next copy keybumping next node ID keybumping next representation keybypass the repository hook systemcall hook after changing revision propertycall hook before changing revision propertycall post-commit hook after committing revisionscall pre-commit hook before committing revisionsclosing changes cursorconnect to source repository with password ARGconnect to source repository with username ARGconnect to sync repository with password ARGconnect to sync repository with username ARGcould not connect to servercreating changecreating cursor for reading a stringcreating cursor for reading changesdaemon modedeleting changesdeleting entry from 'copies' tabledeleting entry from 'nodes' tabledeleting representationdescend recursively, same as --depth=infinitydisable automatic log file removal [Berkeley DB]disable automatic propertiesdisable fsync at transaction commit [Berkeley DB]display this helpdisplay update informationdisregard default and svn:ignore property ignoresdo no interactive promptingdo not cache authentication tokensdo not cross copies while traversing historydo not output the trailing newlinedo not print differences for added filesdo not print differences for deleted filesdon't unlock the targetsdone. dump incrementallyenable automatic propertiesexported%sfetching changesforce operation to runforce read only, overriding repository config fileforce validity of log message sourcegeneral usage: svnadmin SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...] Type 'svnadmin help ' for help on a specific subcommand. Type 'svnadmin --version' to see the program version and FS modules. Available subcommands: general usage: svndumpfilter SUBCOMMAND [ARGS & OPTIONS ...] Type 'svndumpfilter help ' for help on a specific subcommand. Type 'svndumpfilter --version' to see the program version. Available subcommands: general usage: svnlook SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...] Note: any subcommand which takes the '--revision' and '--transaction' options will, if invoked without one of those options, act on the repository's youngest revision. Type 'svnlook help ' for help on a specific subcommand. Type 'svnlook --version' to see the program version and FS modules. Available subcommands: general usage: svnsync SUBCOMMAND DEST_URL [ARGS & OPTIONS ...] Type 'svnsync help ' for help on a specific subcommand. Type 'svnsync --version' to see the program version and RA modules. Available subcommands: get repository uuidgive output suitable for concatenationignore ancestry when calculating mergesignore any repos UUID found in the streamignore externals definitionsinetd modekeep path in working copylast changed rather than current revisionsload at specified directory in repositorymake intermediate directoriesmark revisions as merged (use with -r)maximum number of history entriesmaximum number of log entriesnext-id file corruptno progress (only errors) to stderrnotice ancestry when calculating differencesobsolete; try --depth=files or --depth=immediatesoperate on a revision property (use with -r or -t)operate on a revision property (use with -r)operate on single directory onlyoutput in XMLpass contents of file ARG as additional argsprint as little as possibleprint differences against the copy sourceprint extra informationproperty '%s' deleted from '%s'. property '%s' deleted from repository revision %ld property '%s' set on '%s' property '%s' set on repository revision %ld read configuration from file ARGread lock comment from file ARGread log message from file ARGread property value from file ARGread user configuration files from directory ARGreading copyreading filesystem revisionreading node revisionreading representationrelocate via URL-rewritingremove changelist associationremove redundant Berkeley DB log files from source repository [Berkeley DB]retrieve all revision propertiesretrieve revision property ARGroot of directory to serveset repos UUID to that found in stream, if anyset repository uuidshow a summary of the resultsshow details for copiesshow full paths instead of indenting themshow help on a subcommandshow node revision ids for each pathshow program version informationspecify a password ARGspecify a password ARG (deprecated; see --source-password and --sync-password)specify a username ARGspecify a username ARG (deprecated; see --source-username and --sync-username)specify lock comment ARGspecify log message ARGspecify revision number ARGspecify revision number ARG (or X:Y range)specify transaction name ARGstoring copy recordstoring node revisionstoring representationstoring transaction recordsubcommand argument required svn: run 'svn cleanup' to remove locks (type 'svn help cleanup' for details) svndiff data requested non-existent sourcesvndiff requested position beyond end of streamsvndiff window length is corruptsvnserve: Root path '%s' does not exist or is not a directory. svnserve: The --service flag is only valid if the process is started by the Service Control Manager. system('%s') returned %dthe change made by revision ARG (like -r ARG-1:ARG) If ARG is negative this is like -r ARG:ARG-1timed out waiting for servertreat value as being in charset encoding ARGtry operation but make no changestunnel modetype of repository: 'fsfs' (default) or 'bdb'unknownusage: svn [options] [args] Subversion command-line client, version %s. Type 'svn help ' for help on a specific subcommand. Type 'svn --version' to see the program version and RA modules or 'svn --version --quiet' to see just the version number. Most subcommands take file and/or directory arguments, recursing on the directories. If no arguments are supplied to such a command, it recurses on the current directory (inclusive) by default. Available subcommands: usage: svnadmin crashtest REPOS_PATH Open the repository at REPOS_PATH, then abort, thus simulating a process that crashes while holding an open repository handle. usage: svnadmin create REPOS_PATH Create a new, empty repository at REPOS_PATH. usage: svnadmin deltify [-r LOWER[:UPPER]] REPOS_PATH Run over the requested revision range, performing predecessor delti- fication on the paths changed in those revisions. Deltification in essence compresses the repository by only storing the differences or delta from the preceding revision. If no revisions are specified, this will simply deltify the HEAD revision. usage: svnadmin help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnadmin hotcopy REPOS_PATH NEW_REPOS_PATH Makes a hot copy of a repository. usage: svnadmin list-dblogs REPOS_PATH List all Berkeley DB log files. WARNING: Modifying or deleting logfiles which are still in use will cause your repository to be corrupted. usage: svnadmin list-unused-dblogs REPOS_PATH List unused Berkeley DB log files. usage: svnadmin load REPOS_PATH Read a 'dumpfile'-formatted stream from stdin, committing new revisions into the repository's filesystem. If the repository was previously empty, its UUID will, by default, be changed to the one specified in the stream. Progress feedback is sent to stdout. usage: svnadmin lstxns REPOS_PATH Print the names of all uncommitted transactions. usage: svnadmin recover REPOS_PATH Run the recovery procedure on a repository. Do this if you've been getting errors indicating that recovery ought to be run. Berkeley DB recovery requires exclusive access and will exit if the repository is in use by another process. usage: svnadmin rmlocks REPOS_PATH LOCKED_PATH... Unconditionally remove lock from each LOCKED_PATH. usage: svnadmin rmtxns REPOS_PATH TXN_NAME... Delete the named transaction(s). usage: svnadmin setlog REPOS_PATH -r REVISION FILE Set the log-message on revision REVISION to the contents of FILE. Use --bypass-hooks to avoid triggering the revision-property-related hooks (for example, if you do not want an email notification sent from your post-revprop-change hook, or because the modification of revision properties has not been enabled in the pre-revprop-change hook). NOTE: Revision properties are not versioned, so this command will overwrite the previous log message. usage: svnadmin setrevprop REPOS_PATH -r REVISION NAME FILE Set the property NAME on revision REVISION to the contents of FILE. Use --use-pre-revprop-change-hook/--use-post-revprop-change-hook to trigger the revision property-related hooks (for example, if you want an email notification sent from your post-revprop-change hook). NOTE: Revision properties are not versioned, so this command will overwrite the previous value of the property. usage: svnadmin verify REPOS_PATH Verifies the data stored in the repository. usage: svnlook author REPOS_PATH Print the author. usage: svnlook cat REPOS_PATH FILE_PATH Print the contents of a file. Leading '/' on FILE_PATH is optional. usage: svnlook changed REPOS_PATH Print the paths that were changed. usage: svnlook date REPOS_PATH Print the datestamp. usage: svnlook diff REPOS_PATH Print GNU-style diffs of changed files and properties. usage: svnlook dirs-changed REPOS_PATH Print the directories that were themselves changed (property edits) or whose file children were changed. usage: svnlook help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnlook history REPOS_PATH [PATH_IN_REPOS] Print information about the history of a path in the repository (or the root directory if no path is supplied). usage: svnlook info REPOS_PATH Print the author, datestamp, log message size, and log message. usage: svnlook lock REPOS_PATH PATH_IN_REPOS If a lock exists on a path in the repository, describe it. usage: svnlook log REPOS_PATH Print the log message. usage: svnlook tree REPOS_PATH [PATH_IN_REPOS] Print the tree, starting at PATH_IN_REPOS (if supplied, at the root of the tree otherwise), optionally showing node revision ids. usage: svnlook uuid REPOS_PATH Print the repository's UUID. usage: svnlook youngest REPOS_PATH Print the youngest revision number. usage: svnsync copy-revprops DEST_URL [REV[:REV2]] Copy the revision properties in a given range of revisions to the destination from the source with which it was initialized. If REV and REV2 are provided, copy properties for the revisions specified by that range, inclusively. If only REV is provided, copy properties for that revision alone. If REV is not provided, copy properties for all revisions previously transferred to the destination. REV and REV2 must be revisions which were previously transferred to the destination. You may use "HEAD" for either revision to mean "the last revision transferred". usage: svnsync help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnsync synchronize DEST_URL Transfer all pending revisions to the destination from the source with which it was initialized. use ARG as diff commanduse ARG as external editoruse ARG as merge commanduse ARG as the newer targetuse ARG as the older targetuse a different EOL marker than the standard system marker for files with the svn:eol-style property set to 'native'. ARG may be one of 'LF', 'CR', 'CRLF'use deltas in dump outputuse format compatible with Subversion versions earlier than 1.4use format compatible with Subversion versions earlier than 1.5use strict semanticsuse/display additional information from merge historywait instead of exit if the repository is in use by another processProject-Id-Version: subversion 1.6 Report-Msgid-Bugs-To: dev@subversion.tigris.org POT-Creation-Date: 2009-03-17 14:50+0100 PO-Revision-Date: 2007-10-12 10:09+0200 Last-Translator: Subversion Developers Language-Team: Italian MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=(n != 1); X-Poedit-Basepath: .. --- Chanelist: '%s': ------- Eseguito commit della nuova revisione %ld (caricata dalla revisione originale %ld) >>> ------- Eseguito commit della revisione %ld >>> Commit della Revisione %ld eseguito. Errore: nessun prefisso fornito. Caricamento di oggetto esterno in '%s' Esecuzione di status sull'elemento esterno in '%s' Recupero completato. Opzioni valide: Attenzione :%s * sto aggiungendo il percorso: %s ... * sto cancellando il percorso : %s ... * sto modificando il percorso : %s ... * sto sostituendo il percorso : %s ... %ld => (eliminata) Fuso %s:r%s%s - gestisce il protocollo '%s' (%a, %d %b %Y) (da %s:%ld) - Il certificato ha un errore sconosciuto. - Il certificato è scaduto. - Il nome host del certificato non corrisponde. - Il certificato non è stato creato da un'autorità fidata. Usa il codice di fingerprint per verificare il certificato manualmente! - Il certificato non è ancora valido. ARGfatto. "%s": comando sconosciuto. %b %d %Y%s (revisione %ld)%s (copia locale)%s di '%s'%s di '%s': %d %s (%s://%s)%s, versione %s compilato %s, %s %s: (Non è un'URL valida) %s: (Non è una risorsa sotto controllo di versione) %sProprietà modificate su: %s%s%sattenzione: %s '%s' non è lo stesso repository di '%s''%s' esiste già'%s' esiste già ed occupa lo stesso posto'%s' esiste già e non è una directory'%s'contiene un'opzione '%s', non valida per il formato del file system'%s' non sembra essere un'URL'%s' non sembra essere un percorso della copia locale'%s' non definisce '%s()''%s' non esiste'%s' non esiste nella revisione %ld'%s' non sembra avere una URL associata'%s' esiste e non è vuoto'%s' esiste e non è una directory'%s' ha un tipo di nodo non riconosciuto'%s' ha modifiche locali'%s' ha un gettone di blocco, ma nessun proprietario per quel blocco'%s' non ha URL'%s' non ha informazioni di ascendenzaL'aggancio '%s' è fallito (non è uscito in modo pulito: apr_exit_why: %d, exitcode: %d).L'aggancio '%s' è riuscito ma l'output dell'errore non può essere letto'%s' nella revisione %ld è un oggetto non correlato'%s' è una URL mentre dovrebbe essere un percorso '%s' è una URL, ma le URL non possono essere obiettivi di un commit'%s' è una URL, probabilmente dovrebbe essere un percorso'%s' è un nome riservato e non può essere importato'%s' è una proprietà della copia di lavoro, per cui non è accessibile ai client'%s' è già una copia locale per una URL differente'%s' è già sotto controllo di versione'%s' è un'URL quando dovrebbe essere un percorso'%s' occupa il posto della risorsa effettivamente sotto controllo di versione'%s' è segnato come assente, quindi non può essere preparato per l'aggiunta'%s' non è un file ne' una directory'%s' non è una directoryIl percorso '%s' non è un file'%s' non è un file nella revisione %ld'%s' non è un file o una directory'%s' non è un terminatore di riga valido'%s' non è un nome valido per una proprietà di Subversion'%s' non è un nome valido per una directory di amministrazione'%s' non è una profondità valida; prova 'empty', 'files', 'immediates' o 'infinity''%s' non è un intervallo di revisione valido'%s' non è una copia locale'%s' non è una directory della copia locale'%s' non è bloccato'%s' non è bloccata nel repository'%s' non è bloccata in questa copia di lavoro'%s' non è la root del repository'%s' non è sotto controllo di versione'%s' non è sotto controllo di versione e non fa parte del commit, eppure il suo elemento '%s' fa parte del commit'%s' è stato preparato per essere aggiunto all'interno di un elemento non sotto controllo di versione'%s' non è lo stesso repository di '%s''%s' è bloccato dall'utente '%s'. '%s' non trovato'%s' non trovato nel filesystem'%s' non sotto controllo di versione e non esportato '%s' percorso non trovato'%s' si riferisce ad una directory'%s' ha restituito %d'%s' a '%s' non è una rilocazione valida'%s' sbloccato '%s' non è stato trovato nel repository alla revisione %ld'%s' non era presente nella risorsaL'opzione '--new' è valida insieme all'opzione '--old''DAV:baseline-collection' non era presente sulla risorsa di baselineREPORT di 'get-file-revs' non implementato'get-file-revs' non è implementatoREPORT di 'get-locations' non implementato'get-locations' non è implementatoL'opzione 'incremental' è valida solo nella modalità XML'stat' non è implementatoL'opzione 'verbose' non è valida nella modalità XMLL'opzione 'with-all-revprops' è valida solo nella modalità XMLL'opzione 'with-revprop' è valida solo nella modalità XML(R)ifiuta o acceta (t)emporaneamente(R)ifiuta, accetta (t)emporaneamente o accetta (p)ermanentemente? (locale)(nessun autore)(nessuna data)* Scaricato la revisione %ld. * Verificato la revisione %ld. --- Fusione di r%ld in '%s': --- Fusione di r%ld attraverso r%ld in '%s': --- Fusione inversa di r%ld in '%s': --- Fusione inversa di r%ld attraverso r%ld in '%s': --Questa linea, e quelle sotto di essa, saranno ignorate----auto-props e --no-auto-props sono mutualmente esclusivi--relocate a --depth sono mutualmente esclusivi.merge-sx.r%ld.merge-dx.r%ld.locale; esegui 'svn update' per completare.<<< Iniziata nuova transazione basata sulla revisione originale %ld ascendenza mancante per Una risposta di MERGE per '%s' non è figlia della destinazione ('%s')Si è verificato un errore di checksumUn conflitto nella copia locale impedisce l'operazione richiestaÈ stato fornito un messaggio di log che non era necessarioPer questa operazione è richiesto un percorso sotto controllo di versioneNon è stato possibile generare un rapporto perché non sono stati forniti datiUn hook del repository è fallitoUna rappresentazione è scomparsa o è cambiata fra letture successiveQuando la sorgente di una fusione è la copia locale è necessario specificare una revisioneARG (alcuni comandi accettano anche un intervallo ARG1:ARG2) Una revisione può essere: NUMERO un numero di revisione '{' DATA '}' una revisione all'inizio della data 'HEAD l'ultima revisione 'BASE' la revisione base della copia locale di quell'oggetto 'COMMITTED' l'ultimo commit non successivo a BASE 'PREV' la revisione precedente a COMMITTEDInterruzione del commit: '%s' è ancora in conflittoProtocolli multipli di accesso non sono ancora supportati ('%s' e '%s')Attività non trovataAggiuntoAggiungo %s Aggiungo (bin) %s Aggiunta della directory fallita: %s in %s (%d)Tutti i fornitori di autenticazione sono esauritiApache ha ricevuto un'URI malformataApache non ha un percorso per un filesystem SVNApply-textdelta già attivoApply-textdelta non attivoTutti gli obiettivi fanno parte della stessa copia locale?L'argomento per --limit dev'essere positivoAlmeno una modifica di proprietà è fallita; il repository è rimaso immutatoAlmeno una revisione deve essere non locale per una pegged diffAlla revisione %ld. Tentativo di cambiare un nodo immutabile del filesystemTentativo di calcolare il delta di '%s' contro sé stessoTentativo di estrarre un elemento dall'unwind stack vuoto della copia localeTentativo di rimuovere o ricreare il directory di root del filesystemTentativo di impostare la proprietà '%s' in copia locale su '%s' in un'operazione non di commitTentativo di sbloccare con un unwind stack della copia locale non vuotoSi è tentato di eseguire un comando in una directory amministrativaTentativo di rimuovere un nodo immutabileTentativo di clonare un figlio di nodo immutabileTentativo di creazione di un nodo con un nome illegale '%s'Tentativo di creare una voce in un genitore che non è una directoryTentativo di creare una voce già esistenteTentativo di cancellazione di un nodo con un nome illegale '%s'Tentativo di cancellare la voce '%s' da un nodo non di directoryTentativo di cancellare la voce '%s' da un nodo di directory immutabileTentativo di calcolare il checksum di un nodo che *non* è di tipo fileTentativo di ottenere la lunghezza di un nodo che *non* è di tipo fileTentativo di leggere il contenuto testuale di un nodo che *non* è di tipo fileTentativo di bloccare una directory già bloccataTentativo di clonare un nodo figlio con un nome illegale '%s'Tentativo di aprire un nodo con un nome illegale '%s'Tentativo di aprire un nodo figlio inesistente '%s'Tentativo di scrivere una voce in un nodo immutableTentativo di scrivere una voce in un nodo non di directoryTentativo di scrittura di contenuto testuale in un nodo non di file Tentativo di scrittura di contenuto testuale in un nodo immutabileTentativo di scrittura in una non-transazioneTentativo di eseguire un'operazione ristretta su una risorsa modificataTentativo di eseguire il commit di un'URL più di una voltaErrore di autenticazione dal server: %sAutenticazione fallitaReame di autenticazione: %s Il nome dell'autore non può contenere un a-capoAutorizzazione fallitaURL non valida passata al livello di RAVersione inadeguata del database: compilato con %d.%d.%d, ma eseguito con %d.%d.%dVersione inadeguata del database: %d.%d.%d, mentre dovrebbe essere almeno %d.%d.%dCattiva fusione; l'antenato, la sorgente e la destinazione non sono tutti nello stesso filesystemCattiva fusione: la destinazione '%s' ha lo stesso id ('%s') del suo antenatoPool padre non valido passato a svn_make_pool()Nome di proprietà non validoNome di proprietà non valido: '%s'Errore di checksum per '%s': atteso: %s effettivo: %s Linea di base incorrettaDeadlock nel database BerkeleyErrore nel database BerkeleyErrore del DB Berkeley per il filesystem '%s' durante %s: Errore del DB Berkeley per il filesystem '%s' durante la chiusura dell'ambiente: Errore del DB Berkeley per il filesystem '%s' durante la creazione dell'ambiente: Errore del DB Berkeley per il filesystem '%s' durante l'apertura dell'ambiente: URL non validaData non validaNome file non validoMimetype non validoInformazioni di revisione fornite non valideRapporto di revisione non validoNon posso accettare la connessione del clientNon posso aggiungere '%s' ad una directory destinata alla cancellazioneNon posso aggiungere '%s' ad una directory rimossa: prova a ripristinare la directory superiore primaNon riesco ad allocare il mutex per il filesystemNon posso appendere '%s' a '%s'Non riesco ad allacciarmi al socket del serverNon posso calcolare la data della richiestaNon posso calcolare la dimensione del corpo della richiestaNon riesco a cambiare i privilegi del file '%s'Non riesco a cambiare la directory di lavoro in '%s'Non riesco a controllare la directory '%s'Non riesco a controlloare il percorso '%s'Non riesco ad eseguire chmod su '%s'Non riesco a chiudere la directory '%s'Non riesco a chiudere il file '%s'Non posso chiudere il file di blocco del prototipo di revisione per la transazione '%s'Non riesco a chiudere il flussoNon riesco a connettermi all'host '%s'Non riesco a convertire il percorso del modulo a UTF-8 da UCS-2: '%s'Non riesco a convertire la stringa da '%s' a '%s'Non riesco a convertire la stringa da '%s' alla codifica nativaNon riesco a convertire la stringa dalla codifica nativa a '%s'Non riesco a convertire la stringa in UCS-2: '%s'Non riesco a copiare '%s' in '%s'Non riesco a creare la lista dei mutex per le transazioniNon riesco a creare il mutex in scrittura per l'FSFSNon riesco a creare il convertitore di caratteri, da '%s' a '%s'Non riesco a creare un convertitore di caratteri da '%s' alla codifica nativaNon riesco a creare un convertitore di caratteri dalla codifica nativa a '%s'Non riesco a creare la directory '%s'Non riesco a creare uno stdout nullo per l'aggancio '%s'Non riesco ad aprire una pipe per l'aggancio '%s'Non riesco a creare gli attributi del processo '%s'Non riesco a creare un socket per il serverNon riesco a creare il symbolic link '%s'Non riesco a creare il threadNon riesco a creare l'attributo del threadNon riesco a creare il tunnelNon riesco a rilevare il tipo MIME per un non-file '%s'Non riesco a determinare la codifuca nativa del percorsoNon riesco ad espandere la proprietà timeNon riesco a recuperare i data condivisi dell'FSFSNon riesco a trovare la directory temporaneaNon riesco a trovare il percorso di una copia localeNon riesco a trovare un elementoNon riesco a trovare la voce della directory nel tentativo di aggiungere '%s'Non riesco a scaricare il file '%s'Non riesco a scaricare il file sul discoNon riesco a scaricare il flussoNon riesco ad ottenere le informazioni dell'indirizzoNon riesco ad ottenere gli attributi dal file '%s'Non riesco a ricavare le informazioni dell'attributo dal flussoNon riesco ad avere i permessi di default per il file in '%s' (errore in file stat)Non posso leggere di una non-directoryNon riesco ad ottenere l'accesso esclusivo al file '%s'Non riesco ad ottenere il nome del fileNon riesco ad ottenere i permessi per il file in '%s' (errore in file stat)Non riesco ad ottenere il nome dell'hostNon riesco ad ottenere il nome dell'host localeNon riesco ad ottenere il nome del file del moduloNon riesco a leggere la passwordNon riesco ad ottenere un lock condiviso sul file '%s'Non riesco ad ottenete il timeout del socketNon riesco a leggere il nome utente o la passwordNon riesco a rilevare la directory di lavoroNon riesco ad ottenere il mutex DSONon riesco a prendere il mutex per il filesystemNon riesco ad ottenere il mutex della lista di transazioni per l'FSFSNon riesco a nascondere la directory '%s'Non riesco a bloccare il mutex per la traduzione dell'insieme dei caratteriNon riesco a creare la directory '%s'Non riesco a rendere la pipe in scrittura non-ereditata per l'aggancio '%s'Non riesco a rendere la pipe in scrittura non ereditata per l'aggancio '%s'Non posso manipolare il valore della data correnteNon riesco a spostare '%s' in '%s'Non posso spostare la sorgente nella destinazioneNon posso aprire '%s'Non riesco ad aprire la directory '%s'Non riesco ad aprire il file '%s'Non riesco ad aprire il file in '%s'Non riesco ad aprire stderrNon riesco ad aprire stdinNon riesco ad aprire un file di stdioNon riesco ad aprire stdoutNon riesco ad interpretare il file di hash '%s' per il blocco/entrateNon riesco a leggere il contenuto del collegamentoNon riesco a leggere la directoryNon riesco a leggere la directory '%s'Non riesco a leggere la voce della directory '%s'Non riesco a leggere il file '%s'Non rieco a leggere la prima riga del file di formato '%s'Non riesco a leggere dalla connessioneNon rieco ad ottenere la lunghezza del file '%s'Non riesco a leggere la lunghezza della riga nel flussoNon riesco a leggere stdinNon riesco ad aprire il flussoNon posso ricodificare la stringa di errore da APRNon riesco ad rimuovere '%s'Non riesco a rimuovere la directory '%s'Non riesco a rimuovere il file '%s'Non posso sostituire '%s' ad una directory rimossa: prova a ripristinare la directory superiore primaNon posso sostituire '%s' con un nodo di tipo diverso; esegui il commit della cancellazione, aggiorna la directory superiore prima di aggiungere '%s'Non riesco a ripristinare la directory di lavoroNon riesco ad effettuare il rewind della directory '%s'Non riesco ad impostare il tempo di accesso in '%s'Non riesco ad impostare lo stato scollegatoNon riesco mettere il file '%s' in sola letturaNon riesco a mettere il file '%s' in lettura-scritturaNon riesco ad impostare i permessi per '%s'Non riesco ad impostare il puntatore di posizione nel file '%s'Non riesco ad impostare il puntatore di posizione nel flussoNon riesco ad impostare il file di errore figlio per il processo '%s'Non riesco ad impostare il gestore del file di errore figlio per il processo '%s'Non riesco ad impostare l'input figlio per il processo '%s'Non riesco ad impostare il file di output figlio per il processo '%s'Non riesco ad impostare il cmdtype del processo '%s'Non riesco ad impostare la directory del processo '%s'Non riesco ad impostare il gestore di errore per il processo '%s'Non posso impostare la lista delle proprietà su un nodo di revisione %s *immutabile*Non è possibile impostare il contenuto testuale di una directoryNon puoi specificare -c insieme a --oldNon riesco ad avviare il processo '%s'Non riesco a eseguire stat() su '%s'Non riesco ad archiviare i dati condivisi dell'FSFSNon riesco a suddividere in elementi il comando '%s'Non riesco a rilasciare il mutex DSONon posso abbandonare il mutex per il filesystemNon riesco a rilasciare il mutex della lista di transazioni per l'FSFSNon riesco a sbloccare il mutex per la traduzione dell'insieme dei caratteriNon posso sbloccare la transazione '%s' che non è bloccataNon posso sbloccare il file di blocco del prototipo di revisione per la transazione '%s'Non riesco a sbloccare la transazione '%s'Non riesco a scrivere su '%s'Non riesco a scrivere verso la connessioneNon riesco a scrivere su '%s'Non riesco a scrivere nel flussoNon riesco a calcolare le informazioni di blame per il file binario '%s'Non posso cambiare tipo di nodoNon posso seguire il commit sia di '%s' che di '%s' in quanto fanno riferimento alla stessa URLNon posso confrontare due file provenienti da differenti filesystemsNon posso confrontare dei valori di proprietà in due differenti filesystemNon posso effettuare copie tra due differenti filesystem ('%s' e '%s')Non posso copiare o spostare '%s': non è ancora nel repository; prova ad effettuare il commit, primaNon posso copiare il percorso '%s' in un suo elemento '%s'Non posso copiare revprops per una revisione (%ld) che non è stata ancora sincronizzataNon posso copiare in '%s' essendone programmata la sua cancellazioneNon posso copiare in '%s', non essendo nel repository '%s'; proviene da '%s'Non posso mostrarlo: file indicato come binario.%sNon trovo un'URL per '%s'Non posso inizializzare un repository con del contenutoNon posso invocare l'editor per i messaggi di log in modalità non interattivaNon posso usare sorgenti del repository insieme a sorgenti della copia di lavoroNon riesco a modificare la transazione chiamata '%s' nel filesystem '%s'Non posso spostare l'URL '%s' su se stessaNon posso spostare il percorso '%s' in se stessoNon riesco a negoziare un meccanismo di autenticazioneNon posso sostituire la directory dall'interno della stessaNon posso ripristinare '%s': tipo di nodo non supportatoNon posso ripristinare '%s': tipo di nodo non supportato nella copia localeNon posso annullare l'aggiunta della directory corrente; prova nuovamente dalla directory superioreNon posso impostare '%s' su una directory (%s)Non posso impostare '%s' su un file (%s)Non è possibile specificare la revisione per cancellare la proprietà '%s'Non è possibile specificare una revisione per modificare la proprietà sotto controllo di versione '%s'Non è possibile specificare una revisione quando si imposta la proprietà sotto controllo di versione '%s'Non si possono specificare revisioni (eccetto HEAD) con il comando moveNon posso sbloccare il percorso '%s', nessun nome utente autenticato disponibileNon posso usare --username o --password con una queste opzioni: --source-username, --source-password, --sync-username o --sync-password. Non posso verificare il blocco sul percorso '%s'; nessun gettone di blocco corrispondenteNon posso verificare il blocco al percorso '%s'; nessun nome utente disponibileNon riesco a scrivere il file di hash '%s' per il blocco/entrateNon riesco a scrivere l'hash della proprietà per '%s'Non posso scrivere sul file di blocco del prototipo di revisione per la transazione '%s' perché una precedente rappresentazione è in scrittura da questo processoNon posso scrivere sul file di blocco del prototipo di revisione per la transazione '%s' perché una precedente rappresentazione è in scrittura da questo processoLa voce della caratteristica non è una parolaCatturato il segnaleCessa l'invocazione di questa APIInformazioni del certificato: - Nome host: %s - Valido: dal %s al %s - Autorità: %s - Fingerprint: %s Percorsi cambiati: La voce del percorso modificato non è una listaLa lista delle modifiche non corrispondeChangelist: %s L'oggetto esterno è stato estratto alla revisione %ld. Estratta revisione %ld. Checkout completato. Errore di checksum per '%s': checksum atteso: %s checksum effettivo: %s Errore di checksum per '%s'; atteso: '%s', effettivo: '%s'Errore di checksum per '%s'; atteso: '%s', effettivo: '%s'Errore di checksum per il testo completo risultante '%s': checksum atteso: %s checksum effettivo: %s Un errore nel checksum indica un testo base corrotto: '%s' atteso: %s effettivo: %s Errore nel checksum di '%s' atteso: %s effettivo: %s Un errore nel checksum leggendo la rappresentazione: atteso: %s effettivo: %s Errore di checksum, file '%s': atteso: %s effettivo: %s Errore di checksum per '%s': atteso: %s effettivo: %s Checksum: %s Nome file del certificato del client: Le versioni del client e del server non corrispondonoIl comando 'finish-replay' non è valido al di fuori dei replayEsegue il commit di un file o albero non sotto controllo di versione nel repository. uso: import [PERCORSO] URL Esegue il commit ricorsivamente di una copia di PERCORSO in URL. Se PERCORSO è omesso, '.' viene usato. Le directory superiori vengono create automaticamente nel repository se necessario. Se PERCORSO è una directory, i suoi contenuti vengono aggiunti direttamente sotto URL. Gli elementi che non possono essere messi sotto controllo di versione come file di device e pipes vengono ignorati se --force è specificato. Il commit ha creato la revisione %ld ma avrebbe dovuto creare %ldCommit fallito (seguono dettagli):L'elemento in trasmissione '%s' ha un flag copy ma una revisione non validaL'elemento in trasmissione '%s' ha un flag copy ma non una URL copyfromCommit eseguito, ma seguono altri errori:Commit eseguito, ma gli agganci in post-commit hanno fallito l'esecuzione:Commit della revisione %ld eseguito. Esecuzione di un commit in una directory preparata per essere aggiuntaCompressione dei dati per svndiff fallitaErrore di configurazione: valore intero non valido '%s'File di Base Corrente del Conflitto: %s File di Base Precedente al Conflitto: %s File di Lavoro Precedente al Conflitto: %s File di Proprietà del Conflitto: %s Conflitto in '%s'Rilevato conflitto in '%s'. Rilevato conflitto all'aggiunta del file '%s'. Un oggetto con lo stesso nome esiste già. Risoluzione del conflitto fallitaCopiato dalla Revisione: %ld Copiato dall'URL: %s Copiate le proprietà per la revisione %ld (saltate le proprietà %s*). Copia delle proprietà per la revisione %ld eseguita. Copiato: %s (dalla revisione %ld, %s) La copia da un albero modificabile non è attualmente supportataCopyfrom-url '%s' ha un altro repository di root rispetto a '%s'La copia dalle transazioni non è consentitaDatabase corrotto: conto del predecessore sbagliatoDB corrotto: l'id della copia iniziale non è '0' nel filesystem '%s'DB corrotta: il numero iniziale di revisione non è '0' nel filesystem '%s'DB corrotto: l'id della transazione iniziale non è '0' nel filesystem '%s'File corrente corrottoElemento corrotto nella tabella 'copies' per '%s' nel filesystem '%s'Elemento corrotto nella tabella 'transactions' per '%s' nel filesystem '%s'Revisione %ld del filesystem %s' corrottaBlocco corrotto nella tabella 'locks' per '%s' nel filesystem '%s'File di blocco corrotto per il percoroso '%s' nel filesystem '%s'Node-id corrotto nel nodo di revisioneRilevata corruzione nella lettura della catena di differenza dalla rappresentazione '%s' a '%s'Non riesco a creare la directory al primo livelloNon posso prendere l'URL della versione della risorse (necessaria durante un importazione o quando assente dalle proprietà della copia locale)Non riesco a trovare il termine di riga nella riga della lista di intervallo in '%s'Non è stato possibile ottenere il valore di content-type dalla rispostaNon riesco ad inizializzare la libreria SASLNon trovo il nome dell'host: `%s'Non riesco ad ottenre l'elenco dei meccanismi SASLNon ho potuto salvare il fileNon ho potuto salvare l'URL della risorsa di versioneNon sono riuscito a usare un editor esterno per ottenere un messaggio di log; dovresti impostare la variabile d'ambiente $SVN_EDITOR o usare le opzioni --message (-m) o --file (-F)Non sono riuscito a scrivere l'svndiff su un file temporaneoNon riesco a determinare il percorso assoluto di '%s'Non posso fare la fusione delle proprietàNon sono riuscito a trovare il repositoryNon riesco ad ottenere il nome dell'utente autenticatoNon sono riuscito ad aprire il repositoryNon ho potuto aprire il logCrea una nuova directory sotto controllo di versione. uso: 1. mkdir PERCORSO... 2. mkdir URL... Crea directory sotto controllo di versione. 1. Ogni directory specificata da un PERCORSO nella copia di lavoro è creata localmente e programmata per l'aggiunta al commit successivo. 2. Ogni directory specificata da un'URL viene creata nel repository tramite un commit immediato. A meno di usare l'opzione --parents, in entrambi i casi tutte le directory intermedie devono già esistere. Crea una copia non sotto controllo di versione di un albero. uso: 1. export [-r REV] URL[@PEGREV] [PERCORSO] 2. export [-r REV] PERCORSO1[@PEGREV] [PERCORSO2] 1. Esporta un albero pulito dal repository identificato da URL in PERCORSO, alla revisione REV (se specificata, altrimenti alla revisione HEAD). Se PERCORSO è omesso, l'ultimo componente dell'URL viene usato come nome della directory locale. 2. Esporta un albero pulito dalla copia locale in PERCORSO1, alla revisione REV (se specificata, altrimenti alla revisione WORKING), in PERCORSO2. Se PERCORSO2 è omesso, l'ultimo componente dell'URL viene usato come nome della directory locale. Se REV non è specificato, tutte le modifiche locali saranno mantenute ma i file non sotto controllo di versione non saranno copiati. Se specificato, PEGREV determina la revisione in cui il target verrà prima cercato. Creato: %s Sto creando la directory di sandbox per il DAVSto creando il file authzSto creando la directory per le configurazioniSto creando il file di lock per il databaseSto creando il file di lock per log del databaseSto creando la directory per gli agganciSto creando la directory per i lockSto creando il file passwdSto creando l'aggancio post-commitSto creando l'aggancio post-revprop-changeSto creando l'aggancio start-commitSto creando l'aggancio pre-revprop-changeSto creando l'aggancio start-commitSto creando il file svnserve.confCredenziali non disponibiliRichiesta DAV fallita; è possibile che l'hook pre-revprop-change del repository abbia fallito o non esistaI dati non possono essere correttamente formattati per XMLDecompressione dei dati di svndiff fallitaLa voce di default non ha un numero di revisioneLa voce di default non ha URLDefault: '-u'. Quando Subversion chiama un programma esterno per il diff, ARG è semplicemente passato ad esso. Ma quando Subversion usa la propria implementazione interna per il diff o mostra le annotazioni di blame, ARG può essere uno dei seguenti: -u (--unified): Emette 3 righe del contesto unificato. -b (--ignore-space-change): Gli spazi vengono ignorati ai fini della valutazione delle differenze. -w (--ignore-all-space): Tutti i caratteri assimilabili agli spazi veri e propri vengono ignorati. --ignore-eol-style: Ignora le differenze nei ritorni a capo.Cancellazione fallita: la directory non ha nessuna voce '%s'ElminatoCancello %s Il delta non contiene abbastanza nuovi datiIl delta non riempie la finestra di destinazioneRilevato il blocco della proprietà di delta - non supportata da svndumpfilterDeltificazione della revisione %ld...Profondità: NON VALIDO Profondità: vuoti Profondità: file Profondità: immediati Descrive l'uso di questo programma o di un suo comando. uso: help [COMANDO...] Descrive l'uso di questo programma o di un suo comando. uso: svndumpfilter help [COMANDO...] La destinazione '%s' esiste giàLa destinazione '%s' non è una directoryLa destinazione HEAD (%ld) non è l'ultima revisione fusa (%ld); hai eseguito il commit alla verso la destinazione senza usare svnsync?La directory di destinazione esiste e non verrà sovrascritta a meno che non sia forzatoLa directory di destinazione esiste già; rimuovere la directory oppure usare --force per sovrascriverlaIl repository di destinazione non è stato inizializzatoIl repository di destinazione si sta già sincronizzando con '%s'Non mi aspettavo che %s' fosse la root di una copia localeNon ho ricevuto il marcatore di terminazione della risposta di bloccoNon ho ricevuto il marcatore di terminazione della risposta di sbloccoLa sorgente dati per svndiff è stata inaspettatamente modificataInconsistenze nella rappresentazione '%s' della versione di diffLa directory '%s' che contiene l'area di amministrazione della copia di lavoro è mancanteLa directory '%s' non ha una voce QUESTA_DIRLa directory '%s' non ha URLLa directory '%s' è mancanteVoce della directory corrottaLa directory dovrebbe essere vuota ma non lo èDirlist non è una listaFunzionalità del repository disabilitataNon mostrare le statistiche di filtraggioNon filtrare la revisione delle proprietàIl flusso di esportazione contiene un intestazione non conforme (senza ':') in '%.20s'Il flusso di esportazione contiene un intestazione non conforme (senza nessun valore) in '%.20s'"Il flusso dei dati di esportazione sembra non conformeÈ richiesto almeno una URL o un file sotto controllo di versioneLista degli errori vuotaLa revisione finale %ld non è valida (la revisione più recente è %ld)La voce '%s' ha una programmazione illeggibileLa voce '%s' ha un valore non valido '%s'La voce '%s' ha un tipo di nodo non validoL'elemento '%s' non ha URLL'elemento '%s' ha inaspettatamente cambiato lo status specialeLa voce '%s' è già sotto controllo di versioneL'elemento esiste giàL'elemento per '%s' esiste già (anche se manca il file locale)La voce '%s' ha un repository di root non validoL'elemento di '%s' non ha URLL'elemento di '%s' è segnato come 'copiato' ma non è stato preparato per essere aggiunto. Forse stai eseguendo il commit di un obiettivo che è all'interno di una directory non è o non è ancora, sotto controllo di versione?L'elemento ha un attributo non validoL'elemento non ha URLL'elemento non ha revisioneErrore nell'interruzione del reportErrore alla voce %d nel file delle registrazioni per '%s'Errore nell'incrementare di 1 le revisioni dopo il commit (seguono dettagli):Errore nell'esecuzione di un programma esternoErrore nel chiudere la directory '%s'Errore nella chiusura del filesystemErrore nella chiusura del file nulloErrore nella chiusura del lato di lettura della pipe stderrErrore nella chiusura del lato in scrittura per la pipe di stderrErrore nel confronto fra '%s' e '%s'Errore durante l'aggiunta di '%s'Errore durante la copia ricorsiva di '%s'Errore nella lettura di 'affected time' di '%s'Errore nella lettura di 'affected time' di '%s'Errore nella lettura di 'affected time' di '%s'Errore nell'ottenere l'UID del processoErrore nel calcolare le dimensioni del file '%s'Errore nel processo figlio: %sErrore nella pulizia dopo il commit (seguono dettagli):Errore nell'inizializzazione degli argumenti della linea di comandoErrore nalla modifica della voce di '%s'Errore nella modifica della voce di '%s'Errore durante la normalizzazione dei contenuti modificati nel formato internoErrore nella normalizzazione del messaggio di log nel formato internoErrore nell'apertura del file di lock del databaseErrore nella lettura della proprietà %s su '%s': '%s'Errore nel parsing di '%s'Errore nell'analisi degli argomentiErrore nel parsing delle opzioni di diffErrore nell'analis del numero di revisioneErrore nell'esecuzione del comando '%s' in '%s'Errore nella lettura delle modifiche per la chiave '%s'Errore nella lettura dello spool di risposta alla richiesta %sErrore nella rimozione della changelist dalla voce '%s'Errore nella rimozione del blocco dalla voce per '%s'Errore nella sostituzione del testo base di '%s'Errore nella risoluzione del caso '%s'Errore nel ripristino del testo di '%s'Errore nel recupero di REPORT (%d)Errore nell'esecuzione di '%s': codice %d, gli argomenti erano: nella directory: '%s', nomi di base: %s %s %sErrore nell'esecuzione dell'hook dopo il commitErrore nell'esecuzione dell'aggancio dopo il bloccoErrore nell'esecuzione dell'aggancio dopo lo sbloccoErrore nell'impostazione della proprietà '%s': Errore nello sbloccare le directory bloccate (seguono dettagli):Errore nella validazione del certificato del server per '%s': Errore durante l'attesa del processo '%s'Errore nella scrittura delle voci per il file '%s'Errore nella scrittura dell'hash di '%s'Errore nella scrittura del log per '%s'Errore in scrittura: EOF inattesoErrore nella scrittura di '%s'Errore nella scrittura di '%s': EOF inattesoÈ richiesto esattamente un solo file come argomentoÈ richiesto esattamente un solo nome di proprietà come argomentoSto escludendo (ed eliminando le revisioni vuote per) i prefissi: Sto escludendo i prefissi: '%s' dovrebbe essere una directory ma è stato trovato un file'%s' dovrebbe essere un file ma è stata trovata una directoryIl formato atteso per il filesystem era '%d'; il formato trovato è '%d'Il formato atteso per il filesystem fra 1 e '%d'; il formato trovato è '%d'Atteso un numero di revisione valido e un percorsoIl formato atteso per il repository era '%d' o '%d', mentre quello trovato è '%d'Scade: %s È richiesto un argomento per un obiettivo esplicitoÈ necessario specificare esplicitamente l'oggetto ('%s' interpretato come valore di proprietà)Esportazione completata. Esportato oggetto esterno alla revisione %ld. Esportata revisione %ld. Oggetto esterno alla revisione %ld. Checkout dell'oggetto esterno completata. Esportazione dell'oggetto esterno completata. Aggiornamente dell'oggetto esterno completata. Errore nell'aggiunta della directory '%s': un oggetto con lo stesso nome, ma che non è una directory, esiste giàErrore nell'aggiunta della directory '%s': una directory con lo stesso nome, sotto controllo di versione, esiste giàErrore nell'aggiunta della directory '%s': una directory con lo stesso nome, non sotto controllo di versione, esiste giàErrore nell'aggiunta della directory '%s': argomento copyfrom non ancora supportatoErrore nell'aggiunta della directory '%s': oggetto con lo stesso nome della directory amministrativaNon posso aggiungere il file '%s': un oggetto con stesso nome, ma che non è un file, esiste giàErrore nel calcolare l'MD5 per '%s'Impossibile connettersi al Service Control ManagerImpossibile creare winservice_start_eventCancellazione di mmap '%s' fallitaL'esecuzione di PROPPATCH di WebDAV è fallitaNon ho potuto ottenere le informazioni sul bloccoNon ho trovato l'etichetta '%s' per l'URL '%s'Non riesco a trovare il tempo sulla revisione %ldNon ho pututo ottenere l'accesso esclusivo al repository; forse un altro processo come httpd o svn lo stanno utilizzando?Non è stato possibile ottenere un blocco nel repository di destinazione. Attualmente è tenuto da '%s' Errore nell'ottenere la chiave della nuova stringaNon sono stato in grado di caricare il modulo per il filesystem di tipo '%s'Caricamento delle proprietà dal disco fallitoNon posso segnare '%s' come assente: un oggetto dello stesso nome è gia destinato ad essere aggiuntoNon riesco ad analizzare l'URI '%s'Non ho potuto ripristinare '%s' -- prova ad aggiornare. Esecuzione dell'aggancio '%s' fallita; il link simbolico è rottoFallita l'esecuzione dell'aggancio '%s'Non riesco a completare la scrittura nel flussoScrittura del file aggiornato fallitaCaricamento del plugin fallitoErrore nell'apertura di '%s'Lettura di '%s' fallitaIl file '%s' esiste giàIl file '%s' ha la proprietà 'mime type' impostata a binarioIl file '%s' ha terminatori di riga inconsistentiIl file '%s' ha modifiche localiIl file '%s' nella directory '%s' non è sotto controllo di versioneNon esiste un elemento simile nella directory del filesystemIl filesystem non ha un elementoIl filesystem non ha una simile copiaIl filesystem non ha un simile bloccoIl filesystem non ha un simile node-rev-idIl filesystem non ha una simile rappresentazioneIl filesystem non ha una simile stringaIl filesystem è già apertoIl filesystem è corrottoIl filesystem non è apertoL'oggetto del filesystem è già apertoL'oggetto del filesystem non è stato ancora apertoIl percorso di filesystem '%s' non è un file o una directoryFiltra i nodi con i prefissi specificati dal flusso di esportazione. Utilizzo: svndumpfilter exclude PREF_PERC... Filtra i nodi senza i prefissi specificati dal flusso di esportazione. Utilizzo: svndumpfilter include PREF_PERC... La riga finale nel file di revisione è più lunga di 64 caratteriAlla riga finale nel file di revisione manca uno spazioLa prima riga di '%s' non contiene una cifraLa prima revisione non può essere superiore alla secondaIl file di formato '%s' contiene un carattere non numerico inaspettatoIl formato di una proprietà svn:externals non era validaHo trovato il percorso di una copia localeTrovato header non conforme nel file di revisioneErrore di trama nel protocollo di pipeErrore generale del filesystemRicevuto elemento apply-textdelta senza che fosse preceduto da add-file o open-fileRicevuto un contenuto cdata per la cancellazione di una proprieta'Ricevuto elemento close-directory senza aver mai aperto una directoryRicevuto elemento close-file senza che fosse preceduto da add-file o open-fileRicevuto il percorso di origine ma non la revisione per '%s'Codifica non riconosciuta: '%s'Percorso HTTP non trovatoURL illegale per un repository '%s'URL illegale per un repository svn '%s'Obiettivo illegale per l'operazione richiestaLa repository di root del server è troppo lungaNella directory '%s'Sto includendo (ed eliminando le revisioni vuote per) i prefissi: Sto includendo i prefissi: Versioni di libreria incompatibiliDati incompletiRestituiti dati di blocco incompletiProprietà inattesa o incompletaTerminazione linea inconsistenteArgomenti forniti non validiSono stati forniti parametri incorrettiIndiceErrore di input/outputNon è permessa la rilocazione fra repositoryErrore interno: c'è un genitore (%d) sconosciuto all'elemento 'DAV:response' all'interno della risposta di MERGEArgomento per 'conflict_result' non validoAttributo 'format' non validoURL non valida '%s'URL non valida: carattere illegale nel numero di porta del proxyURL non valida: numero di porta del proxy negativoURL non valida: numero di porta del proxy più grande del numero di porta massimo del TCP 65535Argumento '%s' non valido per le opzioni di diffValore di configurazione di authz non validoTipo di cambiamento non valido nel file di revisioneOrdine dei cambiamenti non valido: nuovo ID di revisione di nodo senza una cancellazioneOrdine dei cambiamenti non valido: operazione diversa da add su un percorso già eliminatoTipo di cambiamento non validoLinea di modifiche non valida nel file di revisioneTrovate carattere '%c' non valido nella lista di intervalloTrovato carattere '%c' non valido nella lista di revisioneConfigurazione non valida: carattere illegale nella maschera di debugConfigurazione non valida: carattere illegale nel valore di timeoutConfigurazione non valida: valore di timeout negativoConfigurazione non valida: non ho potuto caricare il file di certificato '%s'Configurazione non valida: autenticazione http sconosciuta '%s'Valore di configurazione non validoCarattere di controllo non valido '0x%02x' nel percorso '%s'Percorso di origine della copia non valido '%s'Data di creazione non valida nell'intestazione della rispostaFlusso di diff non valido: [nuovo] insn %d i dati della nuova sezioneFlusso di diff non valido: [orig] insn %d supera la vista di origineFlusso di diff non valido: [obi] insn %d inizia oltre la posizione nella vista di destinazioneFlusso di diff non valido: insn %d non può essere decodificatoFlusso di diff non valido: insn %d ha una lunghezza non positivaFlusso di diff non valido: insn %d supera la vista di destinazioneAncoraggio per l'editor non valido; almeno uno dei percorsi di input non è una directory and non c'era una voce di origineRevisione finale %ld non validaTerminatore della voce non validoSequenza di escape non validaCarattere di escape non validoElemento di file o directory non valido durante una modificaSintassi di percorso del filesystem non validaNumero di revisione del filesystem non validoNome della transazione del filesystem non validoBlocco non validoOperazione non valida sulla copia locale correnteOpzione non valida Opzione prop-mod non valida nel file di revisioneRiallocazione non validaRapporto non valido per il primo livello della copia di lavoroNumero di revisione non valido (%ld)Trovato numero di revisione non valido durante l'analisi di '%s'Numero di revisione fornito non validoNumero di revisione fornito non validoProgrammazione non validaRisposta del server non valida ad una richiesta di revisione con dataRevisione iniziale %ld non validaSwitch non validoPercorso non validoOpzione text-mod non valida nel file di revisioneValore di timeout non validoValore non valido per il campo '%s'Riga di versione non valida nel file delle registrazioni di '%s'L'elemento esiste già nel filesystemL'elemento è illeggibileL'elemento non è scrivibileL'elemento non è aggiornatoL'elemento è parzialmente leggibileAutore dell'Ultimo Cambiamento: %s Data dell'Ultimo CambiamentoRevisione dell'Ultimo Cambiamento: %ld Sono stati lasciati dei file modificati o non sotto controllo di versioneTerminazioni di riga diverse da quelle atteseElenca le proprietà di file, directory e revisioni. uso: 1. proplist [OBBIETTIVO[@REV]...] 2. proplist --revprop -r REV [OBBIETTIVO] 1. Restituisce delle proprietà sotto controllo di versione. Se specificata, REV determina in quale revision la proprietà verrà cercata. 2. Elenca le proprietà non sotto controllo di versione della revisione del repository. OBBIETTIVO determina semplicemente a quale repository accedere. Elenca i contenuti delle directory del repository. uso: list [TARGET[@REV]...] Elenca ogni file TARGET e i contenuti di ogni directory TARGET così come esistono nel repository. Se TARGET è un percorso nella copia di lavoro, la URL del repository corrispondente verrà utilizzata. Se specificato, REV determina in quale revisione TARGET verrà inizialmente cercato. Il TARGET di default è '.', cioè la URL del repository corrispondente alla directory corrente di lavoro. Con --verbose i seguenti campi verranno mostrati per ogni elemento: Numero di revisione dell'ultimo commit Autore dell'ultimo commit Se bloccato, la lettera 'O'. (Usa 'svn info URL' per i dettali) Dimensioni (in byte) Data e ora dell'ultimo commit L'URL locale '%s' contiene solo il nome host, non il percorsoL'URL locale '%s' contiene un nome host non supportatoL'URL locale '%s' non contiene il prefisso 'file://'Operazioni in locale, senza commit, non usano messaggi di log o revisioni di proprietàLa voce di locazione non è una listaBlocco creatoIl blocco scadeProprietario del blocco: %s Gettone di blocco: %s Il commento al blocco contiene un byte zeroIl commento al blocco contiene dei caratteri illegaliIl file contenente il commento di blocco è sotto controllo di versione; usa --force-log per proseguire comunqueL'elemento di blocco non è una listaBlocco fallito: esiste una versione più recente di '%s'Il file di blocco '%s' non è un normale fileIl blocco è scadutoLa richiesta di blocco è fallita: %d %sLa risposta di blocco non è una listaIl gettone di blocco non è correttoBlocca i percorsi o gli URL della copia di lavoro nel repository, in modo da impedire che altri utenti possano sottomettere delle modifiche. utilizzo: lock OBBIETTIVO Usa --force per rubare il blocco da un altro utente o copia di lavoro. Il comando di log per la directory '%s' non è correttamente localizzatoLa voce del log manca dell'attributo 'name' (voce '%s' per la directory '%s')La voce di log non è una listaIl messaggio di log contiene un byte zeroIl file contenente il messaggio di log è sotto controllo di versione; usa --force-log per proseguire comunqueLa voce del percorso del log non è una stringaLa voce di log revprop non è una stringaIl checksum MD5 è mancanteIl tipo MIME '%s' non continene '/'Il tipo MIME '%s' ha un tipo di media vuotoURL non conforme per il repositoryLinea copyfrom non conforme nel nodo di revisioneLinea copyroot non conforme nel nodo di revisioneIntestazione dell'esportazione non conformeFlusso di esportazione non conforme; la revisione 0 non può contenere record di nodiLista degli errori non conformiFile non conformeDati di rete malformatiHeader della rappresentazione non conformeDati di scheletro malformatiFlusso di dati non conformeDati svndiff nella rappresentazione non conformiOffset non conforme in un nodo di revisione. Conflitto di fusione durante il commitDiscrepanza nell'estrarre un elemento dall'unwind stack della copia localeLa versione del modulo di filesystem per '%s' non combacia: trovato %d.%d.%d%s, atteso %d.%d.%d%sLa versione di RA non combacia per '%s': trovata %d.%d.%d%s attesa %d.%d.%d%sAttributo 'dest' mancante in '%s'Attributo 'left' mancante in '%s'Attributo 'revision' mancante per '%s'Attributo 'right' mancante in '%s'Attributo 'timestamp' mancante in '%s'Informazioni di cambiamento di percorso per '%s' alla revisione %ld mancantiCpath mancante nel nodo di revisioneManca una voce di defaultFine riga mancante nel file wcprops per '%s'Terminatore della voce mancanteCampo del tipo mancante nel nodo di revisioneAttributo 'name' mancante nell'elemento %sAtttributo name mancante nell'elemento absent-directoryAtttributo di nome mancante nell'elemento absent-fileAtttributo di nome mancante nell'elemento add-directoryAttributo di nome mancante nell'elemento add-fileAttributo 'name' mancante nell'elemento delete-entryAtttributo 'name' mancante nell'elemento 'open-directory'Atttributo di nome mancante nell'elemento open-fileAttributo name mancante nell'elemento di revpropNode-id mancante nel nodo di revisioneArgomento di percorso mancanteArgomenti percorso di repository e nome di proprietà mancantiArgomento di nome della proprietà mancanteArgomento percorso di repository o nome di proprietà mancanteArgomento di percorso del repository mancanteL'ID di nodo di revisione richiesto è mancanteSpecificazione di una revisione richiesta mancanteRevisione mancanteAttributo di revisione mancante nell'elemento delete-entryAttributo di revision mancante per l'elemento open-directoryAttributo di revisione mancante per l'elemento open-fileAttributo 'revision' mancante per l'elemento open-rootAttributo 'revision' mancante nell'elemento target-revisionModificatoModulo per accedere ad un repository sul disco locale.Modulo per accedere ad un repository tramite il protocollo di rete svn.Modulo per accedere ad un repository tramite protocollo usando Neon.Modulo per accedere ad un repository tramite protocollo usando serf.Modulo da usare con un repository che si appoggia ad un database BerkeleyModulo da usare con un repository che si appoggia ad un normale file system (FSFS)Gli spostamenti dal repository alla copia locale non sono supportatiVi sono più argomenti di revisione; non è possibile specificare -c due volte, o sia -c che -rVi sono più argomenti di revisione; prova '-r N:M' invece di '-r N -r M'Bisogna specificare una revisione come numero, come data o come 'HEAD' quando si opera sulla proprietà di una revisioneSpecificati argomenti mutualmente esclusiviIl nome non si riferisce ad una directory del filesystemIl nome non si riferisce ad un file del filesystemIl nome non è un singolo componente di percorsoNome: %s È stata passata una data di scadenza negativa a svn_fs_lockTrovato numero di revisione negativo durante l'analisi di '%s'Neon non è stato in grado di interpretare l'URL '%s'La connessione di rete è stata improvvisamente interrottaErrore di lettura/scrittura sulla reteInizializzazione del socket di rete fallitaÈ richiesto il nome di un nuovo elemento quando si importa un file%s non ha una voce '.'Percorso per il file di autorizzazione non disponibileNon è disponibile un fornitore di autenticazioneNessun cambiamento alla proprietà '%s' in '%s' Nessun cambiamento per la proprietà '%s' nella revisione %ld Non vi sono commit nel repository.Non è stato trovato un genitore comune, non è possibile operare su argomenti disgiuntiNessuna copia con id '%s' nel filesystem '%s'Nessuna voce di default nella directory '%s'Nessun editor esterno disponibileNessuno strumento esterno di fusione disponibileNon non è stato fornito nessun gettone di bloccoNessuna parte del percorso '%s' è stata trovata nella HEAD del repositoryNon esiste un simile attributo per un tag XMLNessuna voce: '%s'Nessuna rappresentazione di questo tipo: '%s'Revisione %ld inesistenteTransazione inesistenteNessun gettone è stato fornito per il percorso '%s' nel filesystem '%s'Nessuna transazione chiamata '%s' nel filesystem '%s'Nessun utente associato al filesystemNessun revisione copyfrom valida nel flusso filtratoNessuna directory genitore sotto controllo di versioneNessun blocco in scrittura per '%s'Tipo di Nodo: directory Tipo di Nodo: file Tipo di Nodo: nessuno Tipo di Nodo: sconosciuto Rilevato il carattere non ASCII (code %d) e non riesco a convertirlo da/in UTF-8Fornito un argumento di limite non numericoNon-stringa come parte del contenuto di un fileNon tutte le revisioni richieste sono state specificateNon autorizzato ad aprire la root per un'operazione di modificaNumero insufficiente di argomentiRappresentazione nulla, ma l'offset è già oltre lo zeroNumero superiore al massimo consentitoL'oggetto non è la root di una revisioneL'oggetto non è la root di una transazioneAggiornamento ostruitoSolo differenze fra il testo base di un percorso e i suoi file di lavoro sono supportati correntementeÈ permessa una sola revisioneDopo un'URL possono essere specificati solo dei percorsi relativiL'operazione non è possibile su file binariL'operazione non è possibile su directoryL'operazione non supporta fonti multipleL'opzione --tunnel-user è valida solo per la modalità tunnel. Restituisce il contenuto dei file o delle URL specificate con le informazioni dell'autore e della revisione per riga. uso: blame OBIETTIVO... Restituisce il contenuto del file o delle URL specificate. uso: cat TARGET[@REV]... Proprietario: %s Password per '%s': Password per '%s': Il percorso '%s' esiste giàIl percorso '%s' non esisteIl percorso '%s' non esiste nella revisione %ldIl percorso '%s' non esiste alla revisione HEADIl percorso '%s' non esiste nella revisione %ldIl percorso '%s' finisce in '%s', che non è supportate per questa operazionePercorso '%s' non ha una revisione confermataIl percorso '%s' non è più associato alla lista delle modifiche. Il percorso '%s' non è un'URLIl percorso '%s' non è una directoryIl percorso '%s' non è un fileIl percorso '%s' non è nella copia di lavoroIl percorso '%s' ora fa parte della lista di modifiche '%s'. Il percorso '%s' non è bloccato Percorso '%s' non trovato nella revisione headPercorso '%s' non trovato nella revisione %ldIl percorso '%s' non è presenteIl percorso non ha un gettone di lockIl percorso è già bloccatoIl valore di path non è una stringaIl percorso non è una directory della copia localeIl percorso non è un file della copia localeIl percorso non è bloccatoSintassi del percorso non supportata in questo contestoPercorso: %s Il nome del percorso non termina con ':'EOF prematuro visto dal serverFine prematura dei dati nel flusso di esportazioneProblema sul primo elemento di log nella copia localeProblema riscontrato nell'esecuzione di logIl processo '%s' ha fallito (motivo %d)Il processo '%s' ha restituito l'errore con codice %dL'elemento delle differenze di proprietà non è una listaProprietà su '%s': La proprietà '%s' è vuotaLa proprietà '%s' non è regolareProprietà '%s' non trovata nel percorso '%s' alla revisione %ldProprietà '%s' non trovata nel percorso '%s' nella transazione %sPercorso '%s' non trovato alla revisione %ldProprietà non trovataL'elemento proplist non è una listaErrore di protocollo: la risposta di MERGE per la risorsa '%s' non ha restituito tutte le proprietà che abbiamo chiesto (e di cui abbiamo bisogno per completare il commit)Errore di protocollo: abbiamo detto al server di non effettuare la fusione automatico delle risorse ma lui ha risposto che '%s' è risultato di una fusioneMette i file e le directory sotto controllo di versione, preparandoli all'aggiunta nel repository. Verranno aggiunti al successivo commit. uso: add PATH... Un'eccezione Python è stata impostata insieme all'erroreIl livello RA non ha ricevuto le informazioni OPTIONS richiesteIl livello RA non è riuscito a creare una richiesta HTTPIl livello RA non è riuscito a recuperare le proprietàIl livello RA non è riuscito ad inizializzare il livello socketIl file del livello RA esiste giàLa richiesta del livello RA è fallitaIl gestore delle risposte di REPORT non è riuscito a completare la guida dell'editorREVISIONE PERCORSO --------- -------- REVISIONE PERCORSO --------- -------- Nomi unici esauritiL'analisi della lista di intervallo è terminata prima del termine della rigaAccesso in lettura negato per la root della modificaErrore di lettura sulla pipeSto leggendo '%s'La lettura dallo stdin è disabilitataLa lettura di una finestra svndiff ha letto oltre la fine della rappresentazioneIl recupero ha incontrato una rappresentazione differenziale della directoryTentativo di recupero ha incontrato un nodo che non è una directoryPulisce ricorsivamente la copia locale rimuovendo blocchi, concludendo le operazioni non terminate, ecc. uso: cleanup [PERCORSO...] Riferimento al nodo non esistente '%s' nel filesystem '%s'La revisione sorgente relativa %ld non è disponibile nel repository correnteRelocate può cambiare, di un'URL, solo la parte relativa al repositoryRimuove PROPRIETÀ da file, directory o revisioni. uso: 1. propdel PROPRIETÀ [PERCORSO...] 2. propdel PROPRIETÀ --revprop -r REV [OBBIETTIVO] 1. Rimuove delle proprietà sotto controllo di versione dalla copia locale. 2. Rimuove una proprietà non sotto controllo di versione dalla revisione del repository. OBBIETTIVO determina semplicemente a quale repository accedere. Rimuove file e directory dal controllo di versione. uso: 1. delete PERCORSO... 2. delete URL... 1. Ogni oggetto specificato da un PERCORSO viene preparato alla cancellazione nel prossimo commit. I file e le directory con modifiche non ancora confermate vengono immediatamente rimossi dalla copia locale, a meno che venga usata l'opzione --keep-local. I PERCORSI che sono modificati o che contengono oggetti non sotto controllo di versione non saranno cancellati, a meno che non sia specificata l'opzione --force. 2. Ogni oggetto specificato da una URL viene cancellato dal repository tramite un commit immediato. Rimuovi le revisioni svuotate dal filtraggioRimosso il blocco da '%s' rimuovo '%s' dalla lista delle modifiche '%s'.Rinumera le revisioni accantonate dal filtraggioRappresentazione '%s' è sia mutabile che non-fulltext'%s' non è modificabileI contenuti sono troppo grossi: ricevuto %s, ma il limite è %sSovrascrivo %s Repository: %s Quando si importa è necessario specificare l'URL del repositoryUUID del Repository: %s Per questa operazione è richiesto l'accesso al repositoryMetodo di accesso al repository non implementatoÈ richiesto un repository come argomentoÈ richiesto un repository come argomento La creazione del repository è fallitoIl repository è stato spostatoIl repository non ha UUIDIl repository non è stato abilitato ad accettare modifiche sulle proprietà di una revisione; contatta l'amministratore per creare l'aggancio pre-revprop-changeOttenuto il lock del repository. Attendere prego; il recupero del repository può richiedere del tempo... Il repository è stato definitivamente spostato in '%s'; aggiorna i riferimentiIl repository è stato temporaneamente spostato in '%s'; aggiorna i riferimentiLa rappresentazione è stata scrittaLa rappresentazione non è di tipo 'delta'Risolto lo stato di conflitto di '%s' Ripristina il file locale (annulla la maggior parte di modifiche locali). uso: revert PERCORSO... Nota: questo comando non richiede accesso al repository e risolve ogni stato di conflito. Tuttavia non ripristina le directory rimosse. Ripristinato '%s' Ripristinato a versione precedente '%s' Commit della Revisione %ld come %ld. La revisione %ld non corrisponde alla revisione esistente %ld in '%s'Revisione %ld saltata. La revisione attualmente in copia (%ld), l'ultima revisione fusa (%ld) e la destinazione HEAD (%ld) non sono coerenti fra loro; hai eseguito il commit verso la destinazione senza usare svnsync?La voce di revisione non è una listaIl file di revisione manca della terminazione di riga finaleProprietà di revisione '%s' non permessa in questo contestoLa proprietà di revisione è vuotaNon è permesso un range di revisioniIl tipo di revisione richiede un percorso ad una copia di lavoro, non una URLRevisione: %ld Le revisioni non possono essere più grandi della revisione più recente %ldRevisioni rinumerate come segue: Errore di SQLiteSSL non è supportatoI dati sicuri '%s' erano seguiti dal byte non ASCII %d: non riesco a convertire da/in UTF-8Azione: aggiungi Azione: cancella Azione: normale Azione: sovrascrivi È necessaria una seconda revisioneTrasmette le modifiche della copia locale al repository. uso: commit [PERCORSO...] Un messaggio di log deve essere fornito, ma può anche essere vuoto. Se non viene fornito tramite le opzioni --message o --file, verrà attivato un editor. Se un qualsiasi obiettivo è (o contiene) è bloccato, verrà sbloccato al termine del commit, se andata a buon fine. Trasmetto %s Il server non ha comunicato la root del repositoryIl server non supporta le revprops personalizzate attraverso i logIl server non supporta operazioni basate sulla dataIl server non supporta il pipelining delle modificheIl server non supporta le funazionalità di bloccoIl server non supporta il recupero delle informazioni sulla root dell'archivioIl server non supporta l'impostazione arbitraria di proprietà di revisione durante il commitIl server non supporta il comando get-lockIl server non supporta il comando lockIl server non supporta il comando replayIl server non supporta il comando unlockIl server supporta fino alla versione %dIl server richiede una versione minima %dL'attesa proprietà deadprop-count non è presente nella risposta del serverIl server ha inviato un valore di ritorno inaspettato (%d %s) nella risposta %s alla richiesta di '%s'La root della sessione è '%s' ma la root del repository è '%s'Imposta un nuovo valore per la proprietà '%s' in '%s' Impostazione di un nuovo volore per la proprietà '%s' nella revisione %ld L'impostazione della proprietà '%s' su un target non locale '%s' non è supportataL'impostazione di una proprietà su un target non locale '%s' necessita di una revisione di partenzaL'impostazione ricorsiva di una proprietà su un target non locale '%s' non è supportataLa dimensione dei dati non compressi non coincide con quella originariaSaltato '%s' Saltato oggetto mancante: '%s' Salto il file binario: '%s' C'è qualcosa di sbagliato nei contenuti del messaggio di logSpiacente, svn_client_diff4 è stato invocato in un modo non ancora supportato'La sorgente %s' non è una directoryL'URL sorgente '%s' è di un altro repository; la lascio come copia locale disgiuntaSorgente e destinazione sembrano non essere nello stesso repository (sorgente: '%s'; destinazione: '%s')L'URL sorgente '%s' proviene da un altro repositoryCodice speciale per contenere gli errore del server da riportare al clientLe proprietà standard non possono essere esplicitamente impostate come proprietà di revisioneLa revisione iniziale %ld è più grande della revisione finale %ldLa revisione di inizio deve precedere la revisione di fineStato rispetto alla revisione: %6ld L'archiviazione della proprietà irregolare '%s' non è consentita attraverso l'interfaccia del repository e potrebbe indicare un bug nel tuo clientLa stringa non rappresenta un nodo o un node-rev-idLunghezza della stringa superiore al massimo consentitoIl comando '%s' non accetta l'opzione '%s' Digita 'svn help %s' per le istruzioni. Il sotto-comando '%s' non accetta l'opzione '%s' Digita 'svnadmin help %s' per maggiori informazioni. Il comando '%s' non accetta l'opzione '%s' Digita 'svndumpfilter help %s' per maggiori informazioni. il comando '%s' non accetta l'opzione '%s' Digita 'svnlook help %s' per l'uso. Il comando '%s' non accetta l'opzione '%s' Digita 'svnsync help %s' per le informazioni sul suo utilizzo. È necessario specificare un argomento per il comando Subversion è un programma di controllo di versione. Per ulteriori informazioni, vedi http://subversion.tigris.org/ Stato di modifica riuscita restituito troppo prestoL'id '%s' successivo (per '%s') esiste già nel filesystem '%s'La somma delle dimensioni dei sotto-blocchi è più grande della lunghezza totale del blocco stessoIl diff riassuntivo può confrontare solo un repository ad un altro repositoryI dati compressi svndiff non sono validiSvndiff contiene un header di finestra corrottoI dati svndiff contengono una visione del sorgente non strettamente crescenteI dati svndiff contengono una finestra corrottaI dati svndiff contengono un'istruzione non validaI dati svndiff sono terminati improvvisamenteI dati svndiff hanno un header non validoretrocedentiSvndiff ha un header non validoLa lunghezza della sorgente di svndiff è contradditoriaI link simbolici non sono supportati su questa piattaformaErrore di sintassi nell'argomento native-eol '%s'Errore di sintassi nell'argomento di revisione '%s'Errore di sintassi nella lettura della revisione '%s'La lista dei percorsi da esaminare non può contenere sia percorsi locali che URLTest fallitoUltimo Aggiornamente del ContenutoIl frammento di delta del testo non è una stringaLa richiesta %s ha restituito XML non valido nella risposta: %s (%s)La risposta di CHECKOUT non conteneva un'intestazione 'Location:'Le variabili ambientali EDITOR, SVN_EDITOR o VISUAL; o la configurazione 'editor-cmd' sono vuote. È atteso un comando di shell.La risposta della proprietà di MERGE ha un errore nello statusLa risposta di OPTIONS non include l'activity-collection-set richiesto; questo spesso significa che l'URL non è WebDAVL'URL '%s' ha un altro repository di root rispetto al suo genitoreLa proprietà UUID non è stata trovata nella risorsa né in alcuno dei suoi genitoriLa proprietà VCC non è stata trovata sulla risorsaIl file '%s' è stato modificato inaspettatamente durante il diffIl report di file-revs non conteneva alcuna revisioneSono disponibili i seguenti moduli di accesso (RA) al repository: Sono disponibili i seguenti moduli di accesso (FS) al repository: Il nome generato della transazione è troppo lungoIl comando get-file-revs non ha restituito nessuna revisioneL'ultima revisione del repository è %ld. La locazione per '%s' alla revisione %ld non esiste nel repository o si riferisce ad un oggetto non correlatoIl commento di blocco è il nome di un percorso (volevi usare -F?); usa '--force-log' per proseguire comunqueIl file del messaggio di log è sotto controllo di versioneIl messaggio di log è un percorsoIl messaggio di log è il nome di un percorso (volevi usare -F?); usa '--force-log' per proseguire comunqueL'operazione è stata interrottaIl percorso non fa parte del repositoryLa proprietà di percorso relativo non è stata trovata sulla risorsaIl repository in '%s' ha uuid '%s', ma la copia locale ha '%s'Il repository è bloccato, forse per un recovery del databaseLa risposta contiene almeno un erroreLa risposta contiene una linea di stato HTTP non conforme.La directory di root non può essere cancellataImpossibile avviare il servizioImpossibile avviare il servizio; si è verificato un errore internoL'opzione diff specificata non è supportataLa transazione specificata non è mutabileEsiste già un elemento sotto controllo di versione '%s'Non esiste una modifica 0Questa è una revisione vuota che fa da riempitivo.Per disabilitare la proprietà %s, usa 'svn propdel'; la semplice impostazione a '%s' non la disabiliterà.Il gettone '%s' non punta a nessun blocco nel filesystem '%s'Troppi argomentiTroppi argomenti per il comando importTroppi elementi nidificatiTransazione '%s' non è basato su una revisione; che stranoTransazione '%s' rimossa. Transazione interrotta, ma la ripulitura è fallitaRipulitura della transazione fallitaLa transazione è mortaLa transazione è morta: '%s'La transazione non è mortaLa transazione non è morta: '%s'La transazione è scadutaTransazione scadutaTrasmissione dati Si è tentato di eseguire un'operazione di versionamento su una risorsa non sotto controllo di versioneTentativo di cambiare una rappresentazione immutabileProva 'svn add' o 'svn add --non-recursive' invece?Usa '%s help' per maggiori informazioniProva 'svn mkdir parents'Usa 'svnversion --help' per maggiori informazioni.Usa 'svndumpfilter help' per maggiori informazioniUsa 'svnlook help' per maggiori informazioniUsa 'svnsync help' per maggiori informazioniSto cercando di aggiungere la proprietà '%s', con valore '%s', ma ne esiste già una con valore '%s'.Sto cercando di modificare la proprietà '%s' da '%s' a '%s', ma è stata eliminata in locale.Sto cercando di modificare la proprietà '%s', da '%s' a '%s', ma ne esiste già una con valore '%s'.Sto cercando di modificare la proprietà '%s' da '%s' a '%s', ma non esiste.Sto cercando di aggiungere la proprietà '%s', con valore '%s', ma è stata eliminata in locale.Sto cercando di eliminare la proprietà '%s', con valore '%s', ma è stato modificato da '%s' a '%s'.Sto cercando di eliminare la proprietà '%s', con valore '%s', ma il valore in locale è'%s'.Tentativo di utilizzare una caratteristica non supportataIl protocollo di tunnel %s richiede che la variabile d'ambiente %s sia definitaDue rapporti al primo livello senza nessun obiettivoDue risorse sotto controllo di versione non hanno rapporto fra loroDigita '%s --help' per informazioni. Digita '%s help' per informazioni. Digita 'svnversion --help' per informazioni. L'URL '%s' contiene un elemento '..'L'URL '%s' non esisteL'URL '%s' non corrisponde alla URL esistente '%s' in '%s'L'URL '%s' non è discende dall'URL di root '%s' del repositoryL'URL '%s' non è propriamente codificata come URIL'URL '%s' non esiste nella revisione %ldL'URL '%s' non-esistente a quella revisioneL'URL '%s' si riferisce ad una directoryL'URL '%s' si riferisce ad un file, non ad una directoryL'URL non ha protocollo: '%s'URL: %s Le URL non hanno protocollo ('%s' e '%s')UUID del gettone: %s Non riesco a verificare l'esistenza del percorso per '%s'Impossibile creare una directory di transazione in '%s' per la revisione %ldImpossibile estrarre dati dall'intestazione della rispostaNon trovo la locazione del repository per '%s' alla revisione %ldNon riesco a trovare il file di autenticazioneNon riesco a bloccare '%s'Non è possibile bloccare/sbloccare a cavallo di più repositoryNon posso creare alcuna directoryNon riesco a creare il nome per '%s'Non posso aprire una sessione ra_local su una URLNon riesco a leggere il file per l'autenticazioneNon riesco a scrivere il file di autenticazioneNon riesco ad aprire il repository '%s'Non riesco ad aprire la radice della modificaNon riesco ad analizzare l'URL '%s'Protocollo di tunnel '%s' non definitoEOF inatteso su un flussoEOF inatteso durante la scritturaFine inaspettata dell'input della voceFine inaspettata dell'input per svndiffNode immutabile inatteso in '%s'Trovato tipo di nodo inattesoTipo di proprietà inatteso o sconosciutoRisposta del server inattesa all'autenticazioneTrovato inaspettatamente '%s': il percorso è segnato come 'mancante'Tipo di filesystem sconosciutoTipo di filesystem sconosciuto '%s'Codifica XML sconosciuta: '%s'Metodo di autenticazione sconosciutoChangelist sconosciutaComando socnosciuto '%s'Comando sconosciuto: '%s' Tipo di elemento sconosciuto per'%s'Nome host sconosciuto '%s'Tipo di nodo sconosciuto per '%s'Tipo di nodo sconosciuto per la rappresentazione '%s'Tipo sconosciuto o inatteso per il percorso '%s'Tipo sconosciuto o non inseribile sotto controllo di verione per '%s'Parola di revprop '%s' sconosciuta nel comando di logStatus sconosciuto '%s' nella risposta del comandoStatus sconosciuto per il comando di bloccoStatus sconosciuto per il comando di sbloccoComando del protocollo svn sconosciutosvn_node_kind sconosciutoLa richiesta di sblocco è fallita: %d %sLa risposta di sblocco non è una listaSblocco eseguito, ma gli agganci in post-unlock hanno fallito l'esecuzioneSblocca i percorsi o le URL della copia di lavoro. utilizzo: unlock OBBIETTIVO... Usa --force per forzare il blocco. Sono state richieste delle azioni non conciliabili su un elemento Incontrato percorso illeggibile; accesso negatoProtocollo '%s' dell'URL non riconosciutoProtocollo '%s' dell'URL non riconosciutoCodifica binaria dei dati non riconosciuta; non posso decodificareTerminazione linea non riconosciutaElemento '%s' del file di log in '%s' non riconosciutoTipo di nodo sconosciuto: '%s'Azione sul nodo sconosciuta per il nodo '%s'Tipo di record sconosciuto nel flussoTipo di revisione non riconosciuto per '%s'Flusso di dati non riconosciutoMessaggio d'errore non specificatoFormato del filesystem non supportatoVersione del lettore di filesystem (%d) per bdb non supportataVersione del lettore di filesystem (%d) per fsfs non supportataVersione del lettore (%d) per ra_local non supportataVersione %d del lettore per ra_neon non supportataVersione (%d) del lettore per ra_serf non supportataVersione %d del lettore per ra_svn non supportataVersione ABI del plugin RA non supportataVersione dell'esportazione non supportata: %dTipo di nodo non supportato per il percorso '%s'Profondità del report '%s' non supportataVersione del repository non supportataFormato della copia locale non supportatoVi sono proprietà non sotto controllo di versione sulla revisione %ld: Aggiornamento completato. Aggiornato oggetto esterno alla revisione %ld. Aggiornato alla revisione %ld. Usa --force per ignorare questa restrizioneL'uso di due URL non è compatibile con la modifica delle informazioni di fusioneL'utente %s non possiede il blocco sul path '%s' (attualmente bloccato da %s)Il nome utente non corrisponde con il proprietario del bloccoUsername: Dati UTF-8 validi (hex:%s) seguito da una sequence UTF-8 non valida (hex:%s)Il valore non sarà impostato se non forzatoFormato del file di versione non correttoVersioni differenti in '%s': trovata %d.%d.%d%s, attesa %d.%d.%d%sATTENZIONE: Riferimento a dati nella revisione %ld, che è più vecchia della ATTENZIONE: più vecchia revisione scaricata (%ld). Il caricamento di questo dump ATTENZIONE: in un repository vuoto fallirà. In attesa di ottenere il blocco del repository; forse un altro processo lo sta utilizzando? Nello specificare i percorsi della copia di lavoro, si può dare un solo targetNella preparazione di '%s' per il commitLa copia di lavoro '%s' è non bloccataCopia locale '%s' bloccataIl formato della copia locale di '%s' è troppo vecchio (%d); esegui di nuovo il checkout della copia localeLa copia locale è corrottaLa copia locale non è aggiornataLa copia di lavoro non è bloccata. Probabilmente è un bug, segnalalo per favoreIl percorso '%s' della copia di lavoro non esiste nel repositoryIl testo di base della copia locale corrottoScrittura negata: non autorizzato a leggere tutta la revisione %ldErrore di scritturaBlocco in scrittura rubato in '%s'Il numero degli obiettivi specificati è sbagliatoValore di proprietà errato o inattesoI dati XML non sono ben-formatiIl parser XML ha fallito in '%s'Devi specificare esattamente un'opzione fra -d, -i, -t o -X. La directory .svn/tmp potrebbe essere mancante o corrotta; esegui 'svn cleanup' e prova di nuovoIl tuo messaggio di log è stato salvato in un file temporaneo:[L'output dell'errore non può essere letto.][L'output dell'errore non può essere tradotto dal locale nativo all'UTF-8.]aggiunge le directory intermediesto allocando un nuovo DI di copia (chiamando 'next-key')sto allocando l'ID per il nuovo nodo (ottenuto con 'next-key')sto allocando la nuova rappresentazione (chiamando next-key)autorizzazione fallitarende il comando verbosoil blame della revisione WORKING è supportatosto incrementando di 1 la chiave della prossima copiasto incrementando di 1 la chiave dell'ID del prossimo nodosto incrementando di 1 la chiave della rappresentazionescavalca il sistema di hook del repositoryinvoca l'aggancio dopo di cambiare la proprietà della revisioneinvoca l'aggancio prima di cambiare la proprietà della revisioneinvoca l'aggancio di post-commit dopo avere effettuato il commit delle revisioniinvoca l'aggancio di pre-commit prima di effettuare il commit delle revisionisto chiudendo il cursore sulla modificheconnessione ad un repository sorgente con la password ARGconnessione ad un repository sorgente con il nome utente ARGconnessione ad un repository di sincronia con la password ARGconnessione ad un repository di sincronia con il nome utente ARGnon ho potuto connettermi al serversto creando le modifichesto creando il cursore per leggere una stringasto creando il cursore per leggere le modifichemodalità daemonsto cancellando le modifichesto cancellando la voce dalla tabella 'copies'sto cancellando la voce dalla tabella 'nodes'sto cancellando la rappresentazionescende ricorsivamente, lo stesso di --depth=infinitydisabilita la rimozione automatica dei file di log [Berkeley DB]disabilita le proprietà automatichedisabilita l'fsync al commit delle transazioni [Berkeley DB]mostra questo aiutomostra le informazioni di aggiornamentonon considerare il comportamento di default o quello specificato tramite svn:ignorenon eseguire richieste interattivenon conservare in cache i token di autenticazionenon attraversare le copie quando si percorre lo storiconon stampa il terminatore di riga finalenon stampare le differenze per i file aggiuntinon stampare le differenze per i file cancellatinon blocca gli obbiettivifatto. effettua un dump incrementaleabilita le proprietà automaticheesportato%ssto ritrovando le modificheforza l'esecuzione dell'operazioneforza l'accesso in sola lettura, sostituendo il file di configurazione del repositoryforza la validità della sorgente di un messaggio di loguso generale: svnadmin COMANDO PERC_REPO [ARG & OPZIONI ...] Digita 'svnadmin help ' per informazioni su uno specifico comando. Digita 'svnadmin --version' per vedere la versione del programma e dei moduli per il back-end del repository Commandi disponibili: uso generale: svndumpfilter COMANDO [ARG & OPZIONI ...] Digita 'svndumpfilter help ' per informazioni su uno specifico comando. Digita 'svnadmin --version' per vedere la versione del programma. Commandi disponibili: uso generale: svnlook COMANDO PERCORSO_REPOSITORY [ARGOMENTI & OPZIONI ...] Nota: ogni comando che accetta le opzioni '--revision' e '--transaction' agirà, se invocato senza alcuna di esse, sulla revisione più recente del repository. Digita 'svnlook help ' per informazione su un comando specifico. Digita 'svnlook --versione' per vedere la versione del programma e dei moduli per il back-end del repository. Comandi disponibili: uso generale: svnsync COMANDO URL_DEST [ARG & OPZIONI ...] Digita 'svnsync help ' per informazioni su uno specifico comando. Digita 'svnsync --version' per vedere la versione del programma e dei suoi moduli. Commandi disponibili: sto leggendo l'uuid del repositoryrestituisce un output adatto alla concatenazioneignora l'ascendenza quando si calcolano le fusioniignora ogni UUID di repository nel flusso di datiignora le definizioni esternemodalità inetdmantieni il percorso nella copia localeultimo cambiamento anziché la revisione correntecarica nella directory specificata del repositorycrea le directory intermediecontrassegna le revisioni come fuse (da usare con -r)numero massimo di voci del lognumero massimo di voci del logfile next-id corrottonessuna informazione di avanzamento (solo errori) in stderrconsidera l'ascendenza quando si calcolano le differenzeobsoleto; prova con --depth=files = --depth=immediatesopera su una proprietà di revisione (usare con -r o -t)opera su una proprietà di revisione (usare con -r)opera su una singola directoryoutput in XMLpassa i contenuti del file ARG come parametri addizionalistampa il meno possibilerestituisce le differenze rispetto la copia sorgenterestituisce le informazioni addizionalila proprietà '%s' è stata cancellata da '%s'. la proprietà '%s' è stata cancellata dalla revisione del repository %ld proprietà '%s' impostata su '%s' proprietà '%s' impostata sulla revisione %ld legge la configurazione dal file ARGlegge il commento al blocco dal file ARGlegge il messagio di log dal file ARGlegge il valore della proprietà dal file ARGleggi i file di configurazione personali dalla directory ARGsto leggendo la copiasto leggendo la revisione del filesystemsto leggendo il nodo di revisionesto leggendo la rappresentazioneriloca tramite la riscrittura delle URLrimuove l'associazione con la changelistrimuove i file di log ridondanti del Berkeley DB dal repository sorgente [Berkeley DB]recupera tutte le proprietà della revisionerecupera la proprietà ARGdirectory di root da servireimposta l'UUID del repository a quello trovato nel flusso di dati, se esisteimposto l'uuid del repositorymostra un sommario dei risultatimostra i dettagli per le copiemostra i percorsi completi invece di nidificarlimostra le informazioni su un comandomostra gli id della revisione del nodo per ogni percorsomostra le informazioni sulla versione del programmaspecifica una password ARGspecifica una password come ARG (deprecato; vedi --source-password e --sync-password)specifica un nome utente ARGspecifica un nome utente come ARG (deprecato; vedi --source-username e --sync-usernam)specifica il commento al blocco ARGspecifica il messaggio di log ARGspecifica il numero di revisione ARGspecifica il numero di revisione ARG (o l'insieme X:Y)specifica il nome di transazione ARGarchivio il record di copiasto archiviando il nodo di revisionesto archiviando la rappresentazionesto archiviando il record della transazionerichiesto argomento per il comando svn: esegui 'svn cleanup' per rimuovere i blocchi (scrivi 'svn help cleanup' per dettagli) I dati svndiff hanno richiesto una sorgente inesistentesvndiff ha richiesto una posizione oltre la fine dei datiLa lunghezza della finestra svndiff è corrottasvnserve: Il percorso di root '%s'non esiste o non è una directory svnserve: L'opzione --service è valida solo se il processo è avviato dal Service Control Manager system('%s') ha restituito %dla modifica effettuata dalla revisione ARG (simile a -r ARG-1:ARG) Se ARG è negativo è simile a -r ARG:ARG-1timeout della connessione al servertratta il valore come se fosse codificato in ARGprova ad eseguire l'operazione ma non effettuare cambiamentimodalità tunneltipo di repository: 'fsfs' (default) o 'bdb'sconosciutouso: svn [opzioni] [argomenti] Client Subversion, versione %s. Digita 'svn help ' per informazioni su uno specifico comando. Digita 'svn --version' per vedere la versione del programma e dei suoi moduli or 'svn --version --quiet' per avere solo il numero di versione. La maggior parte di comandi accettano file e/o directory come argomenti, e agiscono ricorsivamente su di essi. Se non vengono specificati argomenti per tali comandi, verranno eseguiti sulla directory corrente (inclusa). Comandi disponibili: utilizzo: svnadmin crashtest PERCORSO_REPOSITORY Apre la repository al PERCORSO_REPOSITORY e poi interrompe l'operazione, simulando in questo modo un processo che va in crash tenendo aperta la comunicazione con il repository. uso: svnadmin create PERCORSO_REPOSITORY Crea un nuovo repository vuoto in PERCORSO_REPOSITORY. uso: svnadmin deltify [-r LOWER[:UPPER]] REPOS_PATH Esamina l'insieme delle revisioni specificato, restituendo una deltificazione dei percorsi in quelle revisioni. La deltificazione in sostanza comprime il repository immagazzinando solamente le differenze (o delta) rispetto alla revisione precedente. Se non viene specificata nessuna revisione verrà deltificata la revisione HEAD. uso: svnadmin help [COMANDO...] Descrive l'uso di questo programma o dei suoi comandi. uso: svnadmin hotcopy PERC_REPO PERC_NUOVO_REPO Crea una copia a caldo di un repository. uso: svnadmin list-dblogs PERC_REPO Elenca tutti i file di log del database Berkeley. ATTENZIONE: Modificare o cancellare file di log che sono ancora in uso corromperà il repository. uso: svnadmin list-unused-dblogs PERC_REPO Elenca i file di log inutilizzati del database Berkeley. uso: svnadmin load PERC_REPO Legge dei dati in formato dump da stdin ed esegue il commit delle nuove revisioni nel filesystem del repository. Se il repository era precedentemente vuoto, il suo UUID verrà per default impostato dai dati del dump. Le informazioni sul progresso vengono mandate su stdout. uso: svnadmin lstxns PERC_REPO Stampa i nomi di tutte le transazioni di cui non è stato eseguito il commit. uso: svnadmin recover PERC_REPO Esegue la procedura di recupero sul repository. Da usare se hai riscontrato errori che indicano la necessità di un recupero. La procedura di recupero per il Berkeley DB richiede accesso esclusivo al repository e verrà interrotta se risulterà in uso da un altro processo. utilizzo: svnadmin rmlocks PERC_REPO PERC_BLOCCATO... Forza la rimozione del blocc da PERC_BLOCCATO. uso: svnadmin rmtxns PERC_REPO NOME_TRANSAZIONE... Elimina le transazioni elencate. uso: svnadmin setlog PERC_REPO -r REVISIONE FILE Imposta il messaggio di log della revisione REVISIONE in base al contenuto di FILE. Usa --bypass-hooks per evitare di attivare gli agganci relativi alla revisione di proprietà (ad esempio se non vuoi che un'email di notifica venga spedita dall'aggancio post-revprop-change o perché la modifica delle proprietà di revisione non è stata abilitata nell'hook pre-revprop-change). NOTA: le proprietà di revisione non sono sotto controllo di versione, quindi questo comando sovrascriverà permanentemente il messaggio di log precedente. uso: svnadmin setrevprop PERC_REPO -r REVISIONE NOME FILE Imposta la proprietà NOME della revisione REVISIONE in base al contenuto di FILE. Usa --use-pre-revprop-change-hook/--use-post-revprop-change-hook per attivare gli agganci relativi alla revisione di proprietà (ad esempio se vuoi che un'email di notifica venga spedita dell'aggancio post-revprop-change). NOTA: Le proprietà di revisione non sono sotto controllo di versione, quindi questo comando sovrascriverà permanentemente il messaggio di log precedente. uso: svnadmin verify PERC_REPO Verifica i dati immagazzinati nel repository. uso: svnlook author REPOS_PATH Mostra l'autore. uso: svnlook cat PERC_REPO PERC_FILE Mostra i contenuti di un file. Un '/' in coda al PERC_FILE è opzionale. uso: svnlook changed PERC_REPO Mostra i percorsi modificati. uso: svnlook date PERC_REPO Mostra la data. uso: svnlook diff PERC_REPO Mostra i diff stile GNU dei file e delle proprietà modificate. uso: svnlook dirs-changed PERC_REPO Mostra le directory che sono state cambiate (modifiche di proprietà) o i cui file sono stati cambiati. uso: svnlook help [COMANDO...] Descrive l'uso di questo programma o dei suoi comandi. uso: svnlook history PERC_REPO [PERC_NEL_REPO] Mostra le informazioni sulla storia di un percorso nel repository (o della directory di root se non viene fornito nessun percorso). uso: svnlook info PERC_REPO Mostra l'autore, la data, la dimensione del messaggio di log e il suo contenuto. uso: svnlook lock PERC_REPO PERCC_NEL_REPO Se esiste un blocco su un percorso, ne riporta la descrizione uso: svnlook log PERC_REPO Mostra il messaggio di log. uso: svnlook tree PERC_REPO [PERC_NEL_REPO] Mostra l'albero partendo da PERC_NEL_REPO (se fornito, dalla root altrimenti dall'albero), opzionalmente mostrando gli id di revisione del nodo. uso: svnlook uuid PERC_REPO Mostra l'UUID del repository. uso: svnlook youngest PERC_REPO Mostra il numero di revisione più recente. utilizzo: svnsync copy-revprops URL_DEST [REV[:REV2]] Copia le proprietà di revisione, all'interno di un dato intervallo di revisioni, dalla sorgente con cui quella revisione era stata inizializzata. Se REV e REV2 sono fornite, la copia delle proprietà va da REV a REV2, incluse. Se viene fornita solo REV, vengono copiate le proprietà di quella revisione. Se REV non è fornita, vengono copiate tutte le proprietà in precedenza trasferite alla destinazione. REV e REV2 devono essere revisioni che sono state trasferite alla destinazione. Puoi usare "HEAD" per entrambe per indicare l'ultima revisione trasferita. uso: svnsync help [SOTTOCOMANDO...] Descrive l'uso di questo programma o di uno dei suoi sottocomandi. utilizzo: svnsync synchronize URL_DEST Trasferisce tutte le revisioni ancora in corso dalla sorgente alla destinazione. usa ARG come comando diffusa ARG come editor esternousa ARG come comando di fusioneusa ARG come obiettivo più recenteusa ARG come obiettivo meno recenteusa un codice di fine riga (EOL) differente da quello di sistema per tutti i file con una proprietà svn:eol-style impostata a 'native'. ARG può essere 'LF', 'CR' o 'CRLF'usa i delta nell'output del dumpusa un formato compatibile con le versioni di Subversion precedenti alla 1.4usa un formato compatibile con le versioni di Subversion precedenti alla 1.5usa semantiche rigideusa/mostra informazioni aggiuntive dalla storia delle fusioniattende invece di uscire se il repository è in uso da un altro processo0707010008518e000041ed0000000000000000000000034cb5500a00000000000000b500010002ffffffffffffffff0000001f00000000root/usr/local/share/locale/de0707010008518f000041ed0000000000000000000000024cb5500a00000000000000b500010002ffffffffffffffff0000002b00000000root/usr/local/share/locale/de/LC_MESSAGES07070100085190000081a40000000000000000000000014cb550060004c54f000000b500010002ffffffffffffffff0000003900000000root/usr/local/share/locale/de/LC_MESSAGES/subversion.mo,>a <|C%))S"rE,0E Vdڪ7Lbx) ,v%ʭ٭  (4F$X} #®!!='Lt%*3ٯ ..]y#+ݰ"":]&z Rұ7%+]'0(@ .L?{02%'EAm@+.*Fq%"͵"%6,T1LW"X{$$η'&!Bidθ8.)Jt-̹%#>&Ov4-$0-?3mB(! &/V.v'&ͼ+@$W1|0,߽ "$8G ľܾ2*)To6~CC;=y)>K$K1p//74.l)J)3:Dn/-.<@A}< *HYk!t<!B5x>;09A0{9262i).8* 0 ;GZ(m&4' 5Po2$<5920D+u&1$)AI-'62#K,o41-418f<., 68'o90.(1,Z66%(5D,z.$$+PeuF?:74r)B>Ql0~ABA4v  {5; NE%$&Dk<.3I'}22# /G ^#"4??;*{C&F$f'(.Wi <-FY.p+?" %.T7h"6UqIK<$786o(9O&a") 5#P t" R |s,Jc'$$ 60"g$ $2&Gn&,BY o &'=%W}>2%L7r>>?@=O-L<3G'O-}&)/ =[1vf<.L7{ !d)wREC:>~Gq&wQ/9 WZ#% - <K ; ; ; << {y A 67 'n #  J    e!    "  r&tP88TcVAHR@? ^l2.0 <C26/2f*-. ":1]6(0  @#a783%4YX/5Pf={$.u,9%$6A=[;A2, 9_ 1  O $7!u\!5!("%1"W",v"%""." #$#(##$*-$X$s$&$$D& )))**0*K*c*u**!** *++7+S+pi+!+$+$!,F,c,/*34 '4 44B4#U4&y4%4>45& 5G5 W5 e5s5S5a5<6#\6z66G7U_7:7/79 8-Z8,8.8&83 9<?9$|9999+9:&7:^:y: :};=$B!5B)WB1B$B.B@CBHC'CLCeG*fH1HHH6H"I!BIdI II2I+IJ&,J:SJ*JJJKKKK+K5LDLcLLL%L&LL+M1HMzM$N#=N&aN%N%NNN-O?O/ZO)OOO4O0&PWP'qPPPP"PQ Q%AQ"gQ)Q&Q)Q'R!-RORlRR#RWR#SS,S)T0CTtTTTT-T.UJU#iUUU$UU%U"$V8GV7VV0V0V/W*OW:zW&W W/W-X:KXX X!X9X Y#YCY[YvYYYY*YT ZSbZVZB [UP[J[L['>\,f\'\\"\ \&]#A]ne]@]^&2^#Y^0}^S^_/_'K_s_%_____`'-`#U`!y`7``&`=aAQa=a'a+a3%b&Ybb;bbb) c"5c%Xc~ccccc)d6-d#ddbded5Qe)e%e+e1f/5fef0f'fffgC*g#ng<g>g/h>h]h4qh!hh hi*%i+Pi|ii+i*i7j8jMjjjzj)jjjjk%kEk Xk'ykhke lplMm"_mm6mm3m'nIAn%nnn<n7*obo vo*o-o!o5p2Hp&{p4p4p) q*6q+aqq2q/q r/*r ZrA{r<rIr.Ds4ss6sjsJtct|tt%tt"t#u1:u lu2yuuBuDv=Fv:v/v4v4$wYw!rww,www*x ;x\xwx,xxx-x y!!yCy6Yyy1y,y! z.zCzXzlz&zzzzz {*${ O{cp{|0,0Mi!,Ҁ8׀  *:!J(lDځ)$A4Rӂ,B C9}EЄ.#E#i#܅#$>>}؆(*/ZKwÇ ه28$NLsE  '1H%z!%‰92"-U,E5{-(ɋ*%)C+m&($%4P%f.,Ս !#'E*m%+-/)*Y*0 0A7dyAސA 1b7̑Cғ,RCL3]&u-ĕ(# ?.I+x!&Ɩ$-+Yo$$,՗?'["'ǘ '-'U}+1֙"G>E̚'+S/g,"ě8- 0N2Ҝ p4]87<Xt;͞K ,U #ǟ(K-t&۠  >_qD @RV0'5%]+3 NYy,!Х0&Pw(('? #J;n1ܧ($B.g:$#3I`w$9ѩ ) HR&q+Ӫ R, 2'S{"'ѻ46.'edN,Hju.&#6$Z< *=/U#  D9/)iu6 @C6eL+*& 0#G(k&/6M&b5,.(0YvyWZV5 5?4u#%?%1O"&-*#N]8}=1&=9$>2c5 >!Xz&F+ #=0nQ);e~A= &4G#|/-'(&HOJ+')7/a)&"<NB4(0 ??*Fj?  2<Eo GENU ,;B3](|'V%~c/!8IZNSMGMh(j><:'Jr"&2$)+Ut*#1(0&Y"E  "4<RcH:<w/ APPLcCEY:EFh!<E. f<?.TPg1=?(*h5"hPU-OB%`8911+7]$R*)(T&}QH T&,bSA$64L:'.H`~( 7 +8 3d  " * ! &%  L  m ] R ^? f R nX P Z Ks $ ? $$%Io$&5 )%Jp0>3A+$m%&D?$d*'#R+M~'?+4;`2):$d$Z1]J0H!h #,1IYn6'8%`&'%%7)R |(&('>!^-] ,~* /0D6u')%:"`-*+%/Q..-! / I#j% (* S e "/'R'\l'~'(H(=q(?(B("2) U)E`)#))?)**A*@+X+.x+++9+U,p,,>,3,!-9<- v--!-"---2.=K.R.1.!/G0/yx///+0+;00g0;0"00 1 %1.01_1u11!1*1+10'20X2722.2.3,63,c333$3#3 444")4!L4n4-440441585J51e55"5,5"6(&6*O6%z66666667 7)7:7?72V7%7$7789-;<&#<'J<)r<< <<<*<h=V=_=D>>M>'>)>#?/A?q?&?!????@@1@44@#i@@,@1@ @2@,0A ]AV~A A,AB),BVB*nB!B3BB- C 8CYCyC!C0C CCD*DAD\DhzD DE$EXCEZEWEOFTjFxF.8GgGd{GGHH)HI$1I VIwIkIIkJ}JgK!L:LRL*nLLdLM8MLMbM~MMMMM*N/GN wNN?NeNPOWO}pOOP,+P!XP zP[P-P$Q5Q=QUQ gQsQzQRStUQVtlVuW]WZUZ [S[$\9]T]6^^f_PP``bQdI=eOg4gn hF{h5hWhPi\i?j`jiDk6kk=lHlJm>jmhm\pvopqpXsRs2xJxex~xxxy\y\z\|zz*zR{`l{e{\3||||D~(GF&.т##$HX\./4 IWẅ́+n-ֆ -0;"l7LJ*^ ш  .0@(q %lj% /O3^'1ӊ? E3f&Ջ )#G)k*.ތ 5"aXQ8 3E?y4TBC\F9*4d3K͐]4w1ݑ,&&S0z,/ؒ"5+4aer*o.*0,-]({0RD13ɖ;X$n.—#ݗ6U<j3*ۘ<ICOIݙ.''V,~%5њ-,5%b3-ٛ98A4z&*֜CEY a n{Sҝ;&!bCLٞS&Kz'Ɵ0R[r6Π?dE\56=@t75_#5?R;L6/LJ<E)ͩ:2DW1`B#ժ#?<%|AU3:DnFC(>QgM3HְNn α<%=D(3߲" ,$(QzPCFYۼ5HDG9սA+QM}r˾9>Cxkf(:D6?F3>IWC=9==Q;=< BF?>G/P:L-<6s/" +/+[FCWWj1)F<&8IG[F)#3E[&pG"$:`_M%i"/,62F%y&("J1 |$<<H<K5&.&L)s+<HKO8l)A%k;.0$-+R~'44!F&h)*WW&v&75NO68F+!r))7"7.Z')&(;edh63)j<%BE:*)'%="]("""5%Hn#-@<.\,$+)'D l4+)'+Q4}6+1/G8wJ22.1a0;N-O(}6!&*&$Q#v!+(%,N>{>J2D w"$"L\P=(M1HLQg;h(<^;-ui)E 8O9,(!1:lDR:K1, -8f+Z(`ON4u9GWOzHj61CV`YULgKUI6/6f9!#l,-2)>,   F- Et E V kW H U Hb H   0 GO 4 6  <)BUlP3DGE)CH[0@%&<%c$WXKsL s*7 J )kEC-,AD-GrMS#:wJ>)<cf*?3/ -94gF:904%*Z!1"> :X " =&'K&s&!&&%&!&)'<'U'&t''%'''#($C(rh(4(+))<)f));7-;s1 1111/1)2"F2Ki2"242 3 3,3<3aO3o3!4 ?4`44P4oN575057'69_6,6/6563,7D`727 778?28r818"8(8J9Z:}9<A%A2AK0B+|B3B?B>C1[C9CG<I2II(J87J)pJ0J(J.J#KI@K2KK-K=L6CL!zLL$~MMM!M3MQ*N.|N-N'N1O?3OBsO-O8OHPfP"-Q*PQ?{Q?Q?Q%;R1aRIRR>R66S/mS.SES;T,NT>{TT"T+T4)U(^U,U3U8U?!V4aV<V3V-W;5W3qW!W/WmWeX#bY?Y6YRY1PZ/Z1Z+Z;[>L[%[3[/[*\5@\v\3\"\>\9,]f]B]B]#^4)^6^^3^1^<^#8_H\_*__"_H`K`+b`` `1`-`5*a/`aEanapEb~b`5clcfdrjd0d6e,Ee!re(e)e+e-fAfZf'8g3`g1gFgs h hXh>h":i.]i.iii(i#j4Bj*wj'jCjk9(kFbkLkLk/Cl5slJl7l,mMKm"m#m7m/n(Hn%qn!nnn'n*o5Ho1~oso$p=p<p5'q;]q=q4q rH-r,vr"rrrTs1XsQsOs8,tettHt6t!u'<.3k)6ɀ&K'IsF;3@?tm""=` z@&܃+-/6]9Y[ORR6QMLֆ#*?j6" ݇<$;`~<̈10*EpE!ω:6,'c ֊)+!M`x&BÍBB5%\["ԑ0(>0o~%(֒dd=+8#:$^9sO!`:%7U7d%*—"!(0J0{$Hј2D^|(7ٙ7vI1- V:1;ÛeUe''4 (@(i,@@;A%}5 #)8^b&83!5U0461(3Z/0$,-:Z;,5!Q9s4:7/9g44֤:  FPaBqGmPjP4 >AdVA<_~VުO5u-)).S1,& /:B)}/׭2@(i*'5ڮ3%DOj/-,1Bt5.ʰ3-,HGuE$!\FZ10.Et/<г5 +CBo6AC+'o͵ߵjYXN\,d1) 1J|6 5@#v#@"=`y[IWec:550&;Ws$& KWX+ 8*2c+,+ H7+JA9 St3< C=508/T*=9 ?)I,s*(8r)%/)+U/o2FH7b#z1B1/=G!"H *4_7|2 / B:D}4I~K|7,y0j+,>*QC|I.;Jj@<5P$%&4WLM&Jt3'8R4G?|e,%MA"_ASL e :@[7?"78V@+" ,.V[3 TIke #76*nY1?+OE5-*U$az3/1@7r1+&M/r}J7;;s\\a@lW0g%!0P& w"!Z%f4 7>V 2w-"1/uCY!`p jodl&tBmJNZJ *  ) (!@8!(y!,!!(!@"(X"$"C"/")#0D#Vu####$ '$BH$k$h$7`%%6K&G&U& 'Q'H'JB(^(J(K7)i)E)N3*9*j*_'+D+m+m:,2,N,L*-)w-9-1-g .du.9./`4/ /+/G/Q*0H|0;0910;1(l1`1715.24d22e2T3n3+44F;55%55J5<06m646&6667!17S7l77.7 7P7;$8;`85828:92@9?s99999':l:|;;f<}<r<tr=a=5I>A>$>0>0?.H?8w?*?D?& @-G@u@K@F@?'AGgA(A*A-B]1BTB+BAC.RCCC.CC_CXED1DDD0E9FE EE7E%E&F4@F+uF/F0F&G$)GtNGIG[ H!iHH)HH+H0I$PIuI+I'I@I*J!EJ gJ JJJJ(J8#K?\K2K;K L='L+eL/L&L-L1M0HM-yM<M/M#N&8N!_NN N N'NCN3O>O2 PGm=mBm-n5n$In(nn n nn&n%noQ"o toDo&oFo3p#Bp`fp'p,p'q-Dq6rq3q1qr %r0rFr)Or.yr&r rrr#rYsSqs4s0s +u9v&x8y#Uy*yyBy)y z z >z5_zwzc {lq{L{U+|.|7||m}t}Y}!}~,~=~E~^~|~K~>~ WZk _W0d Wp5#Ł*/ED'D!"<#[X ؃&!#Hkl$؄%!#~Ezą?+\IAՇw5)2̉ 2 )S}mt Rs=W %a!ێ&j82?֏%<GXt / P,*$SO5 ْi8O' ؓ%(RN^K~)ksMlXSarSlӤZ@M([8 EEɮ6pFjPp|~:lHwLP D^joڷd* $! #BbVAsAA96Smujna;> 3$^,Il#ac ,@`2b_U epEcLh5pVQ=cE,S63(L;zlCq3zA'&uF GK|!516-`i7Nj)Zh9HDX#QiB&2*rzzUx W>&%'5yCNJ`h<kqH;w; p? SwOvt%ra{Wmaj*-bO}t A{es^i7xIJn$F5}F MSg?qLK [:"JJa/2u9LU"=D ][*g]S$^%oI0!@[Tb b+fVK .v(T MKy!]W6VRgv X!zXrfC'{]GM?U(: G2;u/(d Yf1p;uX`0RRw[\HvPe<6jDQK8.\"TWt+mmu#)CG'? &.nXcZ~4{eC^Sr:Pe|["SD@|_M.~o?Y613x`By3g?#kLTUI kl O~ ~~v%0&N!\t7bA_W 8^P30qT'&#ZLV<h8sq\,Z/oFIw;>g_ -k3:(d=kP4'jxQ42NbC_ 6U<d"|[oBD5YBr nV<k@/9Y1LH9FZwEy|=G7d1j0}}o-+lh##,W5bjX(]$tHJgqWAf%S5]8vw 0N;9hef,*p/4s{"+{z_2zDeZ +I $6(@\D&`v.QL:<^:+\Zm+q>4XV[9cTpTam ym#: x cBm>C^Zm8Ui aY4yfFzE}~A`r=  gFhOu2*Y{+| KV/a ) 49nYI@Uh}%}Yi?,edkRq/9wQ at!815{|g4)s7Wr7 EA *SRl?nBpQ."FjHB_EEMu~G/lKM}xcR@-C<3@T!nN*=A\xy)s7M`fJ.Q!Ilufn: 0En]bDXo)^Mi O 1>Ow--.[sJ POt2y0N'< Oddci Gs|k>GJ7_vPR%>=,o")~pjV$K\&]*HPlP-A=R(x%)toN; B$sHi '6$8r>81d (e) edit - change merged file in an editor (df) diff-full - show all changes made to merged file (r) resolved - accept merged version of file (dc) display-conflict - show all conflicts (ignoring merged version) (mc) mine-conflict - accept my version for all conflicts (same) (tc) theirs-conflict - accept their version for all conflicts (same) (mf) mine-full - accept my version of entire file (even non-conflicts) (tf) theirs-full - accept their version of entire file (same) (p) postpone - mark the conflict to be resolved later (l) launch - launch external tool to resolve conflict (s) show all - show this list --- Changelist '%s': ------- Committed new rev %ld (loaded from original rev %ld) >>> ------- Committed revision %ld >>> Committed revision %ld. Cyrus SASL authentication is available. Error: no prefixes supplied. Fetching external item into '%s' Global options: Log message unchanged or not specified (a)bort, (c)ontinue, (e)dit: Performing status on external item at '%s' Recovery completed. Upgrade completed. Valid options: Warning: %s * adding path : %s ... * deleting path : %s ... * editing path : %s ... * replacing path : %s ... %ld => (dropped) Merged %s:r%s%s Reverse-merged %s:r%s%s (p) postpone - resolve the conflict later (mf) mine-full - accept pre-existing item (ignore upstream addition) (tf) theirs-full - accept incoming item (overwrite pre-existing item) (h) help - show this help - handles '%s' scheme Property conflicts: %u Skipped paths: %u Text conflicts: %u Tree conflicts: %u (%a, %d %b %Y) (from %s:%ld) - The certificate has an unknown error. - The certificate has expired. - The certificate hostname does not match. - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! - The certificate is not yet valid. ARG done. with no output. with output: | %d line | %d lines"%s": unknown command. %a %b %e %H:%M:%S %Y%b %d %Y%b %d %H:%M%s (revision %ld)%s (working copy)%s blocked by %s hook (exit code %d)%s hook failed (exit code %d)%s of '%s'%s of '%s': %d %s (%s://%s)%s, version %s compiled %s, %s %s: (Not a valid URL) %s: (Not a versioned resource) %sProperty changes on: %s%s%swarning: %s '%s' is not the same repository as '%s''%s' already exists'%s' already exists and is in the way'%s' already exists and is not a directory'%s' contains invalid filesystem format option '%s''%s' does not appear to be a URL'%s' does not appear to be a working copy path'%s' does not define '%s()''%s' does not exist'%s' does not exist in revision %ld'%s' does not have a URL associated with it'%s' ends in a reserved name'%s' exists and is non-empty'%s' exists and is not a directory'%s' has an unrecognized node kind'%s' has local modifications'%s' has lock token, but no lock owner'%s' has no URL'%s' has no ancestry information'%s' hook failed (did not exit cleanly: apr_exit_why_e was %d, exitcode was %d). '%s' hook succeeded, but error output could not be read'%s' in revision %ld is an unrelated object'%s' is a URL when it should be a path '%s' is a URL, but URLs cannot be commit targets'%s' is a URL, probably should be a path'%s' is a directory, and thus cannot be a member of a changelist'%s' is a reserved name and cannot be imported'%s' is a subdirectory of an existing repository rooted at '%s''%s' is a wcprop, thus not accessible to clients'%s' is already a working copy for a different URL'%s' is already under version control'%s' is an URL when it should be a path'%s' is in the way of the resource actually under version control'%s' is marked as absent, so it cannot be scheduled for addition'%s' is neither a file nor a directory name'%s' is not a URL'%s' is not a directory'%s' is not a directory in filesystem '%s''%s' is not a file'%s' is not a file in filesystem '%s''%s' is not a file in revision %ld'%s' is not a file or directory'%s' is not a valid --accept value'%s' is not a valid --show-revs value'%s' is not a valid EOL value'%s' is not a valid Subversion property name'%s' is not a valid administrative directory name'%s' is not a valid depth; try 'empty', 'files', 'immediates', or 'infinity''%s' is not a valid depth; try 'exclude', 'empty', 'files', 'immediates', or 'infinity''%s' is not a valid revision range'%s' is not a working copy'%s' is not a working copy directory'%s' is not locked'%s' is not locked in the repository'%s' is not locked in this working copy'%s' is not the root of the repository'%s' is not under version control'%s' is not under version control and is not part of the commit, yet its child '%s' is part of the commit'%s' is out of date'%s' is scheduled for addition within unversioned parent'%s' is scheduled for addition, but is missing'%s' isn't in the same repository as '%s''%s' locked by user '%s'. '%s' must be from the same repository as '%s''%s' not found'%s' not found in filesystem'%s' not versioned, and not exported '%s' path not found'%s' refers to a directory'%s' returned %d'%s' to '%s' is not a valid relocation'%s' unlocked. '%s' was not found in the repository at revision %ld'%s' was not present on the baseline resource'%s' was not present on the resource'%s@%ld' must be ancestrally related to '%s@%ld''--new' option only valid with '--old' option'--xml' option only valid with '--summarize' option'DAV:baseline-collection' was not present on the baseline resource'get-deleted-rev' REPORT not implemented'get-deleted-rev' not implemented'get-file-revs' REPORT not implemented'get-file-revs' not implemented'get-location-segments' REPORT not implemented'get-location-segments' not implemented'get-locations' REPORT not implemented'get-locations' not implemented'incremental' option only valid in XML mode'stat' not implemented'verbose' option invalid in XML mode'with-all-revprops' option only valid in XML mode'with-no-revprops' option only valid in XML mode'with-revprop' option only valid in XML mode(Binary files differ) (R)eject or accept (t)emporarily? (R)eject, accept (t)emporarily or accept (p)ermanently? (invalid date)(local)(no author)(no date)(s) show all options: * Dumped revision %ld. * Verified revision %ld. , (mc) mine-conflict, (tc) theirs-conflict, (mf) mine-full, (tf) theirs-full, (df) diff-full, (e) edit, (r) resolved--- Merging (from foreign repository) r%ld into '%s': --- Merging (from foreign repository) r%ld through r%ld into '%s': --- Merging differences between foreign repository URLs into '%s': --- Merging differences between repository URLs into '%s': --- Merging r%ld into '%s': --- Merging r%ld through r%ld into '%s': --- Reverse-merging (from foreign repository) r%ld into '%s': --- Reverse-merging (from foreign repository) r%ld through r%ld into '%s': --- Reverse-merging r%ld into '%s': --- Reverse-merging r%ld through r%ld into '%s': ----------------------------------------------------------------------- ATTENTION! Your passphrase for client certificate: %s can only be stored to disk unencrypted! You are advised to configure your system so that Subversion can store passphrase encrypted, if possible. See the documentation for details. You can avoid future appearances of this warning by setting the value of the 'store-ssl-client-cert-pp-plaintext' option to either 'yes' or 'no' in '%s'. ----------------------------------------------------------------------- ----------------------------------------------------------------------- ATTENTION! Your password for authentication realm: %s can only be stored to disk unencrypted! You are advised to configure your system so that Subversion can store passwords encrypted, if possible. See the documentation for details. You can avoid future appearances of this warning by setting the value of the 'store-plaintext-passwords' option to either 'yes' or 'no' in '%s'. ----------------------------------------------------------------------- --This line, and those below, will be ignored----accept=%s incompatible with --non-interactive--auto-props and --no-auto-props are mutually exclusive--depth and --set-depth are mutually exclusive--depth cannot be used with --reintegrate--encoding option applies only to textual Subversion-controlled properties--force cannot be used with --reintegrate--reintegrate cannot be used with --ignore-ancestry--reintegrate cannot be used with --ignore-ancestry or --record-only--reintegrate cannot be used with --record-only--relocate and --depth are mutually exclusive--trust-server-cert requires --non-interactive--verbose cannot be used with --revprop or --strict or --xml--with-all-revprops and --with-no-revprops are mutually exclusive--with-revprop and --with-no-revprops are mutually exclusive-c and -r are mutually exclusive-r and -c can't be used with --reintegrate.merge-left.r%ld.merge-right.r%ld.working; run 'svn update' to complete it<<< Started new transaction, based on original revision %ld <<<<<<< MINE (select with 'mc') is missing ancestry>>>>>>> THEIRS (select with 'tc')A MERGE response for '%s' is not a child of the destination ('%s')A checksum mismatch occurredA conflict in the working copy obstructs the current operationA file external cannot overwrite an existing versioned itemA log message was given where none was necessaryA path under version control is needed for this operationA problem occurred; see other errors for detailsA report cannot be generated because no data was suppliedA repository hook failedA representation vanished or changed between readsA working copy merge source needs an explicit revisionARG (some commands also take ARG1:ARG2 range) A revision argument can be one of: NUMBER revision number '{' DATE '}' revision at start of the date 'HEAD' latest in repository 'BASE' base rev of item's working copy 'COMMITTED' last commit at or before BASE 'PREV' revision just before COMMITTEDAborting commit: '%s' remains in conflictAborting commit: '%s' remains in tree-conflictAccess scheme mixtures not yet supported ('%s' and '%s')Activity not foundAddedAdded: %s Added: %s%sAdding %s Adding (bin) %s Adding a directory failed: %s on %s (%d)All authentication providers exhaustedAll non-relative targets must have the same root URLApache got a malformed URIApache has no path to an SVN filesystemApply the differences between two sources to a working copy path. usage: 1. merge sourceURL1[@N] sourceURL2[@M] [WCPATH] 2. merge sourceWCPATH1@N sourceWCPATH2@M [WCPATH] 3. merge [-c M[,N...] | -r N:M ...] SOURCE[@REV] [WCPATH] 1. In the first form, the source URLs are specified at revisions N and M. These are the two sources to be compared. The revisions default to HEAD if omitted. 2. In the second form, the URLs corresponding to the source working copy paths define the sources to be compared. The revisions must be specified. 3. In the third form, SOURCE can be either a URL or a working copy path (in which case its corresponding URL is used). SOURCE (in revision REV) is compared as it existed between revisions N and M for each revision range provided. If REV is not specified, HEAD is assumed. '-c M' is equivalent to '-r :M', and '-c -M' does the reverse: '-r M:'. If no revision ranges are specified, the default range of 0:REV is used. Multiple '-c' and/or '-r' options may be specified, and mixing of forward and reverse ranges is allowed. WCPATH is the working copy path that will receive the changes. If WCPATH is omitted, a default value of '.' is assumed, unless the sources have identical basenames that match a file within '.': in which case, the differences will be applied to that file. NOTE: Subversion will only record metadata to track the merge if the two sources are on the same line of history -- if the first source is an ancestor of the second, or vice-versa. This is guaranteed to be the case when using the third form listed above. The --ignore-ancestry option overrides this, forcing Subversion to regard the sources as unrelated and not to track the merge. Apply-textdelta already activeApply-textdelta not activeAre all the targets part of the same working copy?Argument to --limit must be positiveAssertion failureAssociate (or dissociate) changelist CLNAME with the named files. usage: 1. changelist CLNAME TARGET... 2. changelist --remove TARGET... At least one property change failed; repository is unchangedAt least one revision (r%ld) not yet merged from '%s'At least one revision must be non-local for a pegged diffAt revision %ld. Attempt to add tree conflict that already existsAttempt to change immutable filesystem nodeAttempt to deltify '%s' against itselfAttempt to fetch capability '%s' resulted in '%s'Attempt to pop empty WC unwind stackAttempt to remove or recreate fs root dirAttempt to set wc property '%s' on '%s' in a non-commit operationAttempt to unlock with non-empty unwind stackAttempted command in administrative dirAttempted merge tracking info change on immutable nodeAttempted mergeinfo count change on immutable nodeAttempted removal of immutable nodeAttempted to clone child of non-mutable nodeAttempted to create a node with an illegal name '%s'Attempted to create entry in non-directory parentAttempted to create entry that already existsAttempted to delete a node with an illegal name '%s'Attempted to delete entry '%s' from *non*-directory nodeAttempted to delete entry '%s' from immutable directory nodeAttempted to get checksum of a *non*-file nodeAttempted to get length of a *non*-file nodeAttempted to get textual contents of a *non*-file nodeAttempted to lock an already-locked dirAttempted to make a child clone with an illegal name '%s'Attempted to open node with an illegal name '%s'Attempted to open non-existent child node '%s'Attempted to set entry in immutable nodeAttempted to set entry in non-directory nodeAttempted to set textual contents of a *non*-file nodeAttempted to set textual contents of an immutable nodeAttempted to write to non-transactionAttempted to write to readonly SQLite dbAttempting restricted operation for modified resourceAttempting to commit to a URL more than onceAttempting to delete nonexistent property '%s'Authentication error from server: %sAuthentication failedAuthentication realm: %s Author name cannot contain a newlineAuthorization failedBad ID in cacheBad URL passed to RA layerBad copyfrom arguments receivedBad database version: compiled with %d.%d.%d, running against %d.%d.%dBad database version: got %d.%d.%d, should be at least %d.%d.%dBad merge; ancestor, source, and target not all in same fsBad merge; target '%s' has id '%s', same as ancestorBad parent pool passed to svn_make_pool()Bad property nameBad property name: '%s'Base checksum mismatch on '%s': expected: %s actual: %s Baseline incorrectBerkeley DB deadlock errorBerkeley DB errorBerkeley DB error for filesystem '%s' while %s: Berkeley DB error for filesystem '%s' while closing environment: Berkeley DB error for filesystem '%s' while creating environment: Berkeley DB error for filesystem '%s' while opening environment: Bogus ID '%s' in cacheBogus URLBogus UUIDBogus dateBogus filenameBogus mime-typeBogus revision information givenBogus revision reportBogus server specificationBring changes from the repository into the working copy. usage: update [PATH...] If no revision is given, bring working copy up-to-date with HEAD rev. Else synchronize working copy to revision given by -r. For each updated item a line will start with a character reporting the action taken. These characters have the following meaning: A Added D Deleted U Updated C Conflict G Merged E Existed A character in the first column signifies an update to the actual file, while updates to the file's properties are shown in the second column. A 'B' in the third column signifies that the lock for the file has been broken or stolen. If --force is used, unversioned obstructing paths in the working copy do not automatically cause a failure if the update attempts to add the same path. If the obstructing path is the same type (file or directory) as the corresponding path in the repository it becomes versioned but its contents are left 'as-is' in the working copy. This means that an obstructing directory's unversioned children may also obstruct and become versioned. For files, any content differences between the obstruction and the repository are treated like a local modification to the working copy. All properties from the repository are applied to the obstructing path. Obstructing paths are reported in the first column with code 'E'. Use the --set-depth option to set a new working copy depth on the targets of this operation. Currently, the depth of a working copy directory can only be increased (telescoped more deeply); you cannot make a directory more shallow. Can only crop a working copy with a restrictive depthCan only crop directoriesCan't accept client connectionCan't add '%s' to a parent directory scheduled for deletionCan't add '%s' to deleted directory; try undeleting its parent directory firstCan't allocate FS mutexCan't append '%s' to '%s'Can't bind server socketCan't calculate requested dateCan't calculate the request body sizeCan't change perms of file '%s'Can't change working directory to '%s'Can't check directory '%s'Can't check path '%s'Can't chmod '%s'Can't close directory '%s'Can't close file '%s'Can't close prototype revision lockfile for transaction '%s'Can't close streamCan't connect to host '%s'Can't convert module path to UTF-8 from UCS-2: '%s'Can't convert string from '%s' to '%s':Can't convert string from '%s' to native encoding:Can't convert string from native encoding to '%s':Can't convert string to UCS-2: '%s'Can't copy '%s' to '%s'Can't create DSO mutexCan't create FSFS txn list mutexCan't create FSFS txn-current mutexCan't create FSFS write-lock mutexCan't create a character converter from '%s' to '%s'Can't create a character converter from '%s' to native encodingCan't create a character converter from native encoding to '%s'Can't create an entry for a forbidden nameCan't create an entry with a reserved name while trying to add '%s'Can't create cache mutexCan't create directory '%s'Can't create null stdout for hook '%s'Can't create pipe for hook '%s'Can't create process '%s' attributesCan't create server socketCan't create symbolic link '%s'Can't create threadCan't create threadattrCan't create tunnelCan't detect MIME type of non-file '%s'Can't determine the native path encodingCan't expand timeCan't fetch FSFS shared dataCan't find a temporary directoryCan't find a working copy pathCan't find an entryCan't find parent directory's entry while trying to add '%s'Can't flush file '%s'Can't flush file to diskCan't flush streamCan't get address infoCan't get attribute information from file '%s'Can't get attribute information from streamCan't get default file perms for file at '%s' (file stat error)Can't get entries of non-directoryCan't get exclusive lock on file '%s'Can't get file nameCan't get file perms for file at '%s' (file stat error)Can't get hostnameCan't get local hostnameCan't get module file nameCan't get passwordCan't get shared lock on file '%s'Can't get socket timeoutCan't get username or passwordCan't get working directoryCan't grab DSO mutexCan't grab FS mutexCan't grab FSFS mutex for '%s'Can't grab FSFS txn list mutexCan't hide directory '%s'Can't increment mergeinfo count on *file* node-revision %%s to %%%s (> 1)Can't increment mergeinfo count on node-revision %%s to negative value %%%sCan't iterate a memcached cacheCan't lock cache mutexCan't lock charset translation mutexCan't make directory '%s'Can't make pipe read handle non-inherited for hook '%s'Can't make pipe write handle non-inherited for hook '%s'Can't manipulate current dateCan't move '%s' to '%s'Can't move source to destCan't open '%s'Can't open directory '%s'Can't open file '%s'Can't open file at '%s'Can't open stderrCan't open stdinCan't open stdio fileCan't open stdoutCan't parse lock/entries hashfile '%s'Can't read contents of linkCan't read directoryCan't read directory '%s'Can't read directory entry in '%s'Can't read file '%s'Can't read first line of format file '%s'Can't read from connectionCan't read length line in file '%s'Can't read length line in streamCan't read stdinCan't read streamCan't recode error string from APRCan't remove '%s'Can't remove directory '%s'Can't remove file '%s'Can't replace '%s' in deleted directory; try undeleting its parent directory firstCan't replace '%s' with a node of a differing type; the deletion must be committed and the parent updated before adding '%s'Can't restore working directoryCan't rewind directory '%s'Can't set access time of '%s'Can't set detached stateCan't set file '%s' read-onlyCan't set file '%s' read-writeCan't set permissions on '%s'Can't set position pointer in file '%s'Can't set position pointer in streamCan't set process '%s' child errfileCan't set process '%s' child errfile for error handlerCan't set process '%s' child inputCan't set process '%s' child outfileCan't set process '%s' cmdtypeCan't set process '%s' directoryCan't set process '%s' error handlerCan't set proplist on *immutable* node-revision %sCan't set text contents of a directoryCan't specify -c with --oldCan't split line into components: '%s'Can't start process '%s'Can't stat '%s'Can't store FSFS shared dataCan't tokenize command '%s'Can't truncate file '%s'Can't truncate streamCan't ungrab DSO mutexCan't ungrab FS mutexCan't ungrab FSFS mutex for '%s'Can't ungrab FSFS txn list mutexCan't unlock cache mutexCan't unlock charset translation mutexCan't unlock nonlocked transaction '%s'Can't unlock prototype revision lockfile for transaction '%s'Can't unlock unknown transaction '%s'Can't write to '%s'Can't write to connectionCan't write to file '%s'Can't write to streamCannot accept '%s' property because it is not encoded in UTF-8Cannot accept non-LF line endings in '%s' propertyCannot both exclude and switch a pathCannot calculate blame information for binary file '%s'Cannot change node kindCannot commit both '%s' and '%s' as they refer to the same URLCannot compare file contents between two different filesystemsCannot compare property value between two different filesystemsCannot copy between two different filesystems ('%s' and '%s')Cannot copy or move '%s': it is not in the repository yet; try committing firstCannot copy path '%s' into its own child '%s'Cannot copy revprops for a revision (%ld) that has not been synchronized yetCannot copy to '%s' as it is scheduled for deletionCannot copy to '%s', as it is not from repository '%s'; it is from '%s'Cannot crop '%s': it is a switched pathCannot crop '%s': it is going to be removed from repository. Try commit insteadCannot delete a file externalCannot deltify revisions prior to r%ldCannot determine revision of working copyCannot display: file marked as a binary type.%sCannot exclude current directoryCannot exclude root directoryCannot find a URL for '%s'Cannot initialize a repository with content in itCannot insert a file external from '%s' into a working copy from a different repository rooted at '%s'Cannot invoke editor to get log message when non-interactiveCannot mix repository and working copy sourcesCannot modify transaction named '%s' in filesystem '%s'Cannot move URL '%s' into itselfCannot move a file externalCannot move path '%s' into itselfCannot move the file external at '%s'; please propedit the svn:externals description that created itCannot negotiate authentication mechanismCannot non-recursively commit a directory deletion of a directory with child nodesCannot reintegrate into a working copy not entirely at infinite depthCannot reintegrate into a working copy that has local modificationsCannot reintegrate into a working copy with a switched subtreeCannot reintegrate into mixed-revision working copy; try updating firstCannot remove the file external at '%s'; please propedit or propdel the svn:externals description that created itCannot replace a directory from withinCannot reverse-merge a range from a path's own future history; try updating firstCannot revert '%s': unsupported entry node kindCannot revert '%s': unsupported node kind in working copyCannot revert addition of current directory; please try again from the parent directoryCannot revert unversioned item '%s'Cannot set '%s' on a directory ('%s')Cannot set '%s' on a file ('%s')Cannot specify a revision range with two URLsCannot specify revision for deleting versioned property '%s'Cannot specify revision for editing versioned property '%s'Cannot specify revision for setting versioned property '%s'Cannot specify revisions (except HEAD) with move operationsCannot unlock path '%s', no authenticated username availableCannot use --username or --password with any of --source-username, --source-password, --sync-username, or --sync-password. Cannot verify lock on path '%s'; no matching lock-token availableCannot verify lock on path '%s'; no username availableCannot write lock/entries hashfile '%s'Cannot write property hash for '%s'Cannot write to the prototype revision file of transaction '%s' because a previous representation is currently being written by another processCannot write to the prototype revision file of transaction '%s' because a previous representation is currently being written by this processCapability entry is not a wordCaught signalCease invocation of this APICertificate information: - Hostname: %s - Valid: from %s until %s - Issuer: %s - Fingerprint: %s Changed paths: Changed-path entry not a listChangelist doesn't matchChangelist names must not be emptyChangelist: %s Check out a working copy from a repository. usage: checkout URL[@REV]... [PATH] If specified, REV determines in which revision the URL is first looked up. If PATH is omitted, the basename of the URL will be used as the destination. If multiple URLs are given each will be checked out into a sub-directory of PATH, with the name of the sub-directory being the basename of the URL. If --force is used, unversioned obstructing paths in the working copy destination do not automatically cause the check out to fail. If the obstructing path is the same type (file or directory) as the corresponding path in the repository it becomes versioned but its contents are left 'as-is' in the working copy. This means that an obstructing directory's unversioned children may also obstruct and become versioned. For files, any content differences between the obstruction and the repository are treated like a local modification to the working copy. All properties from the repository are applied to the obstructing path. See also 'svn help update' for a list of possible characters reporting the action taken. Checked out external at revision %ld. Checked out revision %ld. Checkout complete. Checksum mismatch for '%s': expected checksum: %s actual checksum: %s Checksum mismatch for '%s'; expected: '%s', actual: '%s'Checksum mismatch for '%s'; recorded: '%s', actual: '%s'Checksum mismatch for resulting fulltext (%s): expected checksum: %s actual checksum: %s Checksum mismatch indicates corrupt text base: '%s' expected: %s actual: %s Checksum mismatch on rep '%s': expected: %s actual: %s Checksum mismatch while reading representation: expected: %s actual: %s Checksum mismatch, file '%s': expected: %s actual: %s Checksum mismatch, rep '%s': expected: %s actual: %s Checksum: %s Client certificate filename: Client/server version mismatchCommand 'finish-replay' invalid outside of replaysComment (%i line): %s Comment (%i lines): %s Comment (%i line): %s Comment (%i lines): %s CommitCommit an unversioned file or tree into the repository. usage: import [PATH] URL Recursively commit a copy of PATH to URL. If PATH is omitted '.' is assumed. Parent directories are created as necessary in the repository. If PATH is a directory, the contents of the directory are added directly under URL. Unversionable items such as device files and pipes are ignored if --force is specified. Commit created rev %ld but should have created %ldCommit failed (details follow):Commit item '%s' has copy flag but an invalid revisionCommit item '%s' has copy flag but no copyfrom URLCommit succeeded, but other errors follow:Commit succeeded, but post-commit hook failedCommitted revision %ld. Committing in directory scheduled for additionCompression of svndiff data failedConfig error: invalid boolean value '%s' for '%s'Config error: invalid boolean value '%s' for '[%s] %s'Config error: invalid integer value '%s'Config error: invalid value '%s' for option '%s'Conflict Current Base File: %s Conflict Previous Base File: %s Conflict Previous Working File: %s Conflict Properties File: %s Conflict at '%s'Conflict callback violated API: returned no merged fileConflict callback violated API: returned no merged file.Conflict callback violated API: returned no resultsConflict callback violated API: returned no results.Conflict discovered in '%s'. Conflict discovered when trying to add '%s'. An object of the same name already exists. Conflict for property '%s' discovered on '%s'. Conflict resolution failedCopied From Rev: %ld Copied From URL: %s Copied properties for revision %ld (%s* properties skipped). Copied properties for revision %ld. Copied: %s (from rev %ld, %s) Copy from mutable tree not currently supportedCopy source checksum mismatch on copy from '%s'@%ld to '%s' in rev based on r%ld: expected: %s actual: %s Copyfrom-url '%s' has different repository root than '%s'Copying from transactions not allowedCopyright (C) 2000-2009 CollabNet. Subversion is open source software, see http://subversion.tigris.org/ This product includes software developed by CollabNet (http://www.Collab.Net/). Corrupt DB: faulty predecessor countCorrupt DB: initial copy id not '0' in filesystem '%s'Corrupt DB: initial revision number is not '0' in filesystem '%s'Corrupt DB: initial transaction id not '0' in filesystem '%s'Corrupt current fileCorrupt entry in 'copies' table for '%s' in filesystem '%s'Corrupt entry in 'transactions' table for '%s' in filesystem '%s'Corrupt filesystem revision %ld in filesystem '%s'Corrupt lock in 'locks' table for '%s' in filesystem '%s'Corrupt lockfile for path '%s' in filesystem '%s'Corrupt node-id in node-revCorruption detected whilst reading delta chain from representation '%s' to '%s'Could not create top-level directoryCould not fetch the Version Resource URL (needed during an import or when it is missing from the local, cached props)Could not find end of line in range list line in '%s'Could not get content-type from responseCould not initialize the SASL libraryCould not lookup hostname `%s'Could not obtain the list of SASL mechanismsCould not parse mergeinfo string '%s'Could not save fileCould not save the URL of the version resourceCould not use external editor to fetch log message; consider setting the $SVN_EDITOR environment variable or using the --message (-m) or --file (-F) optionsCould not write svndiff to temp fileCouldn't determine absolute path of '%s'Couldn't do property mergeCouldn't find a repositoryCouldn't obtain the authenticated usernameCouldn't open a repositoryCouldn't open logCouldn't perform atomic initializationCreate a new directory under version control. usage: 1. mkdir PATH... 2. mkdir URL... Create version controlled directories. 1. Each directory specified by a working copy PATH is created locally and scheduled for addition upon the next commit. 2. Each directory specified by a URL is created in the repository via an immediate commit. In both cases, all the intermediate directories must already exist, unless the --parents option is given. Create an unversioned copy of a tree. usage: 1. export [-r REV] URL[@PEGREV] [PATH] 2. export [-r REV] PATH1[@PEGREV] [PATH2] 1. Exports a clean directory tree from the repository specified by URL, at revision REV if it is given, otherwise at HEAD, into PATH. If PATH is omitted, the last component of the URL is used for the local directory name. 2. Exports a clean directory tree from the working copy specified by PATH1, at revision REV if it is given, otherwise at WORKING, into PATH2. If PATH2 is omitted, the last component of the PATH1 is used for the local directory name. If REV is not specified, all local changes will be preserved. Files not under version control will not be copied. If specified, PEGREV determines in which revision the target is first looked up. Created: %s Creating DAV sandbox dirCreating authz fileCreating conf directoryCreating db lock fileCreating db logs lock fileCreating hook directoryCreating lock dirCreating passwd fileCreating post-commit hookCreating post-revprop-change hookCreating pre-commit hookCreating pre-revprop-change hookCreating start-commit hookCreating svnserve.conf fileCredential data unavailableCredentials not savedDAV request failed; it's possible that the repository's pre-revprop-change hook either failed or is non-existentData cannot be safely XML-escapedDecompression of svndiff data failedDefault entry has no revision numberDefault entry is missing URLDefault: '-u'. When Subversion is invoking an external diff program, ARG is simply passed along to the program. But when Subversion is using its default internal diff implementation, or when Subversion is displaying blame annotations, ARG could be any of the following: -u (--unified): Output 3 lines of unified context. -b (--ignore-space-change): Ignore changes in the amount of white space. -w (--ignore-all-space): Ignore all white space. --ignore-eol-style: Ignore changes in EOL styleDefault: '-u'. When Subversion is invoking an external diff program, ARG is simply passed along to the program. But when Subversion is using its default internal diff implementation, or when Subversion is displaying blame annotations, ARG could be any of the following: -u (--unified): Output 3 lines of unified context. -b (--ignore-space-change): Ignore changes in the amount of white space. -w (--ignore-all-space): Ignore all white space. --ignore-eol-style: Ignore changes in EOL style. -p (--show-c-function): Show C function name in diff output.Delete failed: directory has no entry '%s'DeletedDeleted: %s Deleted: %s%sDeleting %s Delta depth 'exclude' not supportedDelta does not contain enough new dataDelta does not fill the target windowDelta property block detected - not supported by svndumpfilterDeltifying revision %ld...Depth 'exclude' not supported for linkDepth: INVALID Depth: empty Depth: files Depth: immediates Describe the usage of this program or its subcommands. usage: help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svndumpfilter help [SUBCOMMAND...] Destination '%s' already existsDestination '%s' is not a directoryDestination HEAD (%ld) is not the last merged revision (%ld); have you committed to the destination without using svnsync?Destination URLs are brokenDestination directory exists, and will not be overwritten unless forcedDestination directory exists; please remove the directory or use --force to overwriteDestination directory of add-with-history is missing a URLDestination repository has not been initializedDestination repository is already synchronizing from '%s'Did not expect '%s' to be a working copy rootDidn't receive end marker for lock responsesDidn't receive end marker for unlock responsesDiff data source modified unexpectedlyDiff version inconsistencies in representation '%s'Directory '%s' containing working copy admin area is missingDirectory '%s' has no THIS_DIR entryDirectory '%s' has no URLDirectory '%s' is missingDirectory '%s' is out of dateDirectory '%s' is out of date; try updatingDirectory entry corruptDirectory needs to be empty but is notDirlist element not a listDisabled repository featureDisplay information about a local or remote item. usage: info [TARGET[@REV]...] Print information about each TARGET (default: '.'). TARGET may be either a working-copy path or URL. If specified, REV determines in which revision the target is first looked up. Display merge-related information. usage: mergeinfo SOURCE[@REV] [TARGET[@REV]] Display information related to merges (or potential merges) between SOURCE and TARGET (default: '.'). If the --show-revs option is not provided, display revisions which have been merged from SOURCE to TARGET; otherwise, display the type of information specified by the --show-revs option. Display the differences between two revisions or paths. usage: 1. diff [-c M | -r N[:M]] [TARGET[@REV]...] 2. diff [-r N[:M]] --old=OLD-TGT[@OLDREV] [--new=NEW-TGT[@NEWREV]] \ [PATH...] 3. diff OLD-URL[@OLDREV] NEW-URL[@NEWREV] 1. Display the changes made to TARGETs as they are seen in REV between two revisions. TARGETs may be all working copy paths or all URLs. If TARGETs are working copy paths, N defaults to BASE and M to the working copy; if URLs, N must be specified and M defaults to HEAD. The '-c M' option is equivalent to '-r N:M' where N = M-1. Using '-c -M' does the reverse: '-r M:N' where N = M-1. 2. Display the differences between OLD-TGT as it was seen in OLDREV and NEW-TGT as it was seen in NEWREV. PATHs, if given, are relative to OLD-TGT and NEW-TGT and restrict the output to differences for those paths. OLD-TGT and NEW-TGT may be working copy paths or URL[@REV]. NEW-TGT defaults to OLD-TGT if not specified. -r N makes OLDREV default to N, -r N:M makes OLDREV default to N and NEWREV default to M. 3. Shorthand for 'svn diff --old=OLD-URL[@OLDREV] --new=NEW-URL[@NEWREV]' Use just 'svn diff' to display local modifications in a working copy. Do not display filtering statistics.Don't filter revision properties.Don't know anything about capability '%s'Don't know how to handle '%s' for capability '%s'Dropped %d node: Dropped %d nodes: Dropped %d revision. Dropped %d revisions. Dump stream contains a malformed header (with no ':') at '%.20s'Dump stream contains a malformed header (with no value) at '%.20s'Dumpstream data appears to be malformedDuplicate something in working copy or repository, remembering history. usage: copy SRC[@REV]... DST When copying multiple sources, they will be added as children of DST, which must be a directory. SRC and DST can each be either a working copy (WC) path or URL: WC -> WC: copy and schedule for addition (with history) WC -> URL: immediately commit a copy of WC to URL URL -> WC: check out URL into WC, schedule for addition URL -> URL: complete server-side copy; used to branch and tag All the SRCs must be of the same type. WARNING: For compatibility with previous versions of Subversion, copies performed using two working copy paths (WC -> WC) will not contact the repository. As such, they may not, by default, be able to propagate merge tracking information from the source of the copy to the destination. Edit a property with an external editor. usage: 1. propedit PROPNAME TARGET... 2. propedit PROPNAME --revprop -r REV [TARGET] 1. Edits versioned prop in working copy or repository. 2. Edits unversioned remote prop on repos revision. TARGET only determines which repository to access. See 'svn help propset' for more on setting properties. Either a URL or versioned item is requiredEmpty 'victim' field in tree conflict descriptionEmpty error listEmpty noderev in cacheEnd revision %ld is invalid (youngest revision is %ld)Entry '%s' has illegal scheduleEntry '%s' has invalid '%s' valueEntry '%s' has invalid depthEntry '%s' has invalid node kindEntry '%s' has no URLEntry '%s' has unexpectedly changed special statusEntry '%s' is already under version controlEntry already existsEntry contains non-canonical path '%s'Entry for '%s' exists (though the working file is missing)Entry for '%s' has invalid repository rootEntry for '%s' has no URLEntry for '%s' is marked as 'copied' but is not itself scheduled for addition. Perhaps you're committing a target that is inside an unversioned (or not-yet-versioned) directory?Entry has an invalid attributeEntry has no URLEntry has no revisionError aborting reportError at entry %d in entries file for '%s':Error bumping revisions post-commit (details follow):Error calling external programError closing directory '%s'Error closing filesystemError closing null fileError closing read end of stderr pipeError closing write end of stderr pipeError comparing '%s' and '%s'Error converting depth from locale to UTF-8Error converting entry in directory '%s' to UTF-8Error copying logfile; the DB_LOG_AUTOREMOVE feature may be interfering with the hotcopy algorithm. If the problem persists, try deactivating this feature in DB_CONFIGError during add of '%s'Error during recursive copy of '%s'Error getting 'affected time' for '%s'Error getting 'affected time' of '%s'Error getting 'affected time' on '%s'Error getting UID of processError getting file size on '%s'Error handling externals definition for '%s':Error in child process: %sError in post-commit clean-up (details follow):Error initializing command line argumentsError modifying entry for '%s'Error modifying entry of '%s'Error normalizing edited contents to internal formatError normalizing log message to internal formatError opening db lockfileError parsing %s property on '%s': '%s'Error parsing '%s'Error parsing argumentsError parsing diff optionsError parsing memcache server '%s'Error parsing revision numberError parsing tree conflict skelError processing command '%s' in '%s'Error reading changes for key '%s'Error reading spooled %s request responseError recording tree conflicts in '%s'Error removing changelist from entry '%s'Error removing lock from entry for '%s'Error replacing text-base of '%s'Error resolving case of '%s'Error restoring text for '%s'Error retrieving REPORT (%d)Error retrieving replay REPORT (%d)Error running '%s': exitcode was %d, args were: in directory '%s', basenames: %s %s %sError running catastrophic recovery on hotcopy; the DB_LOG_AUTOREMOVE feature may be interfering with the hotcopy algorithm. If the problem persists, try deactivating this feature in DB_CONFIGError running editor.Error running editor; leaving all conflicts.Error running merge tool.Error running merge tool; leaving all conflicts.Error running post-commit hookError running post-lock hookError running post-unlock hookError setting property '%s': Error unlocking locked dirs (details follow):Error validating server certificate for '%s': Error waiting for process '%s'Error writing entries file for '%s'Error writing hash to '%s'Error writing log for '%s'Error writing stream: unexpected EOFError writing to '%s'Error writing to '%s': unexpected EOFExactly one file argument requiredExactly one property name and one file argument requiredExcluding (and dropping empty revisions for) prefixes: Excluding prefixes: Expected '%s' to be a directory but found a fileExpected '%s' to be a file but found a directoryExpected 'revprops', found '%s'Expected FS format '%d'; found format '%d'Expected FS format between '1' and '%d'; found format '%d'Expected SQLite database not found: %sExpected a valid revnum and pathExpected current rev to be <= %ld but found %ldExpected database row missingExpected repository format '%d' or '%d'; found format '%d'Expected valid revision rangeExpires: %s Explicit target argument requiredExplicit target required ('%s' interpreted as prop value)Export complete. Exported external at revision %ld. Exported revision %ld. External at revision %ld. External checkout complete. External export complete. External update complete. Extra database row foundFS format too old to pack, please upgrade.Failed to add directory '%s': a non-directory object of the same name already existsFailed to add directory '%s': a versioned directory of the same name already existsFailed to add directory '%s': an unversioned directory of the same name already existsFailed to add directory '%s': copyfrom arguments not yet supportedFailed to add directory '%s': object of the same name as the administrative directoryFailed to add file '%s': a non-file object of the same name already existsFailed to add file '%s': an unversioned file of the same name already existsFailed to calculate MD5 digest for '%s'Failed to connect to Service Control ManagerFailed to create winservice_start_eventFailed to delete mmap '%s'Failed to execute WebDAV PROPPATCHFailed to fetch lock informationFailed to find label '%s' for URL '%s'Failed to find time on revision %ldFailed to get exclusive repository access; perhaps another process such as httpd, svnserve or svn has it open?Failed to get lock on destination repos, currently held by '%s' Failed to get new string keyFailed to load module for FS type '%s'Failed to load properties from diskFailed to locate 'copyfrom' path in working copyFailed to mark '%s' absent: item of the same name is already scheduled for additionFailed to parse URI '%s'Failed to revert '%s' -- try updating instead. Failed to run '%s' hook; broken symlinkFailed to start '%s' hookFailed to write full amount to streamFailed writing updated fileFailure loading pluginFailure opening '%s'Failure reading rep '%s'File '%s' already existsFile '%s' has binary mime type propertyFile '%s' has inconsistent newlinesFile '%s' has local modificationsFile '%s' in directory '%s' is not a versioned resourceFile '%s' is out of dateFile '%s' is out of date; try updatingFile already exists: filesystem '%s', revision %ld, path '%s'File already exists: filesystem '%s', transaction '%s', path '%s'File is not mutable: filesystem '%s', revision %ld, path '%s'File not found: revision %ld, path '%s'File not found: transaction '%s', path '%s'File or directory '%s' is out of date; try updatingFilesystem directory has no such entryFilesystem has no itemFilesystem has no such checksum-representation index recordFilesystem has no such copyFilesystem has no such lockFilesystem has no such node origin recordFilesystem has no such node-rev-idFilesystem has no such representationFilesystem has no such stringFilesystem is already openFilesystem is corruptFilesystem is not openFilesystem object already openFilesystem object has not been opened yetFilesystem path '%s' is neither a file nor a directoryFilesystem upgrade is not supportedFilter out nodes with given prefixes from dumpstream. usage: svndumpfilter exclude PATH_PREFIX... Filter out nodes without given prefixes from dumpstream. usage: svndumpfilter include PATH_PREFIX... Final line in revision file longer than 64 charactersFinal line in revision file missing spaceFirst line of '%s' contains non-digitFirst revision cannot be higher than secondFormat file '%s' contains an unexpected non-digitFormat of an svn:externals property was invalidFound a working copy pathFound an unexpected \0 in the file external '%s'Found malformed header in revision fileFraming error in pipe protocolGET request failed: %d %sGeneral filesystem errorGot apply-textdelta element without preceding add-file or open-fileGot cdata content for a prop deleteGot close-directory element without ever opening a directoryGot close-file element without preceding add-file or open-fileGot source path but no source revision for '%s'Got unrecognized encoding '%s'HTTP Path Not FoundIllegal file external revision kind %d for path '%s'Illegal parent directory URL '%s'Illegal repository URL '%s'Illegal repository root URL '%s'Illegal svn repository URL '%s'Illegal target for the requested operationImpossibly long repository root from serverImproper relative URL '%s'In directory '%s'In file '%s' line %d: assertion failed (%s)In file '%s' line %d: internal malfunctionIncluding (and dropping empty revisions for) prefixes: Including prefixes: Incompatible library versionIncomplete dataIncomplete lock data returnedIncomplete or unterminated property blockInconsistent line ending styleIncorrect arguments suppliedIncorrect parameters givenIndexInitialization of SSPI library failedInput/output errorInquiry about unknown capabilityInter-repository relocation not allowedInternal error: there is an unknown parent (%d) for the 'DAV:response' element within the MERGE responseInvalid %s property on '%s': cannot use a URL '%s' as the target directory for an external definitionInvalid %s property on '%s': cannot use two absolute URLs ('%s' and '%s') in an external; one must be a path where an absolute or relative URL is checked out toInvalid %s property on '%s': target '%s' is an absolute path or involves '..'Invalid 'conflict_result' argumentInvalid 'format' attributeInvalid 'node_kind' field in tree conflict descriptionInvalid URL '%s'Invalid URL: illegal character in proxy port numberInvalid URL: negative proxy port numberInvalid URL: proxy port number greater than maximum TCP port number 65535Invalid argument '%s' in diff optionsInvalid authz configurationInvalid change kind in rev fileInvalid change ordering: new node revision ID without deleteInvalid change ordering: non-add change on deleted pathInvalid change typeInvalid changes line in rev-fileInvalid character '%c' found in range listInvalid character '%c' found in revision listInvalid character in hex checksumInvalid config: illegal character in debug mask valueInvalid config: illegal character in timeout valueInvalid config: negative timeout valueInvalid config: unable to load PKCS#11 provider '%s'Invalid config: unable to load certificate file '%s'Invalid config: unknown HTTP library '%s'Invalid config: unknown http authtype '%s'Invalid config: unknown password store '%s'Invalid configuration valueInvalid conflict info in tree conflict descriptionInvalid control character '0x%02x' in path '%s'Invalid copy source path '%s'Invalid creation date header value in response.Invalid depth (%c) for path '%s'Invalid diff stream: [new] insn %d overflows the new data sectionInvalid diff stream: [src] insn %d overflows the source viewInvalid diff stream: [tgt] insn %d starts beyond the target view positionInvalid diff stream: insn %d cannot be decodedInvalid diff stream: insn %d has non-positive lengthInvalid diff stream: insn %d overflows the target viewInvalid editor anchoring; at least one of the input paths is not a directory and there was no source entryInvalid end revision %ldInvalid entry terminatorInvalid escape sequenceInvalid escaped characterInvalid file or dir token during editInvalid filesystem path syntaxInvalid filesystem revision numberInvalid filesystem transaction nameInvalid length (%%%s) when about to read a stringInvalid lockInvalid operation on the current working directoryInvalid option. Invalid option; cannot choose based on conflicts for properties. Invalid option; cannot choose based on conflicts in a binary file. Invalid option; cannot display conflicts for a binary file. Invalid option; cannot display conflicts for properties. Invalid option; original files not available. Invalid option; there's no merged version to diff. Invalid option; there's no merged version to edit. Invalid peg revision %ldInvalid prop-mod flag in rev-fileInvalid relocationInvalid report for top level of working copyInvalid revision number '%ld'Invalid revision number (%ld)Invalid revision number found parsing '%s'Invalid revision number suppliedInvalid revision specifierInvalid scheduleInvalid server response to dated-rev requestInvalid start revision %ldInvalid switchInvalid syntax of argument of --config-optionInvalid target pathInvalid text-mod flag in rev-fileInvalid timeout valueInvalid value (%%%s) for node revision mergeinfo countInvalid value for field '%s'Invalid version info in tree conflict descriptionInvalid version line in entries file of '%s'Item already exists in filesystemItem is not readableItem is not writableItem is out of dateItem is partially readableIteration terminated before completionKindless noderev in cacheLast Changed Author: %s Last Changed DateLast Changed Rev: %ld Last Merged Revision: %s Left locally modified or unversioned filesLine endings other than expectedList all properties on files, dirs, or revisions. usage: 1. proplist [TARGET[@REV]...] 2. proplist --revprop -r REV [TARGET] 1. Lists versioned props. If specified, REV determines in which revision the target is first looked up. 2. Lists unversioned remote props on repos revision. TARGET only determines which repository to access. List directory entries in the repository. usage: list [TARGET[@REV]...] List each TARGET file and the contents of each TARGET directory as they exist in the repository. If TARGET is a working copy path, the corresponding repository URL will be used. If specified, REV determines in which revision the target is first looked up. The default TARGET is '.', meaning the repository URL of the current working directory. With --verbose, the following fields will be shown for each item: Revision number of the last commit Author of the last commit If locked, the letter 'O'. (Use 'svn info URL' to see details) Size (in bytes) Date and time of the last commit Local URL '%s' contains only a hostname, no pathLocal URL '%s' contains unsupported hostnameLocal URL '%s' does not contain 'file://' prefixLocal, non-commit operations do not take a log message or revision propertiesLocation entry not a listLocation segment entry not a listLocation segment report failed on '%s'@'%ld'LockLock Comment (%i line): %s Lock Comment (%i lines): %s Lock CreatedLock ExpiresLock Owner: %s Lock Token: %s Lock comment contains a zero byteLock comment contains illegal charactersLock comment file is a versioned file; use '--force-log' to overrideLock element not a listLock failed: newer version of '%s' existsLock file '%s' is not a regular fileLock has expiredLock has expired: lock-token '%s' in filesystem '%s'Lock request failed: %d %sLock response not a listLock token is incorrectLock working copy paths or URLs in the repository, so that no other user can commit changes to them. usage: lock TARGET... Use --force to steal the lock from another user or working copy. Log command for directory '%s' is mislocatedLog entry missing 'name' attribute (entry '%s' for directory '%s')Log entry not a listLog message contains a zero byteLog message file is a versioned file; use '--force-log' to overrideLog path entry not a stringLog revprop entry not a stringMD5 checksum is missingMD5 checksum mismatch on rep '%s': expected: %s actual: %s MIME type '%s' contains invalid character '%c'MIME type '%s' does not contain '/'MIME type '%s' has empty media typeMalformed URL for repositoryMalformed UUID '%s'Malformed XML: %s at line %ldMalformed copyfrom line in node-revMalformed copyroot line in node-revMalformed dumpfile headerMalformed dumpstream: Revision 0 must not contain node recordsMalformed error listMalformed fileMalformed network dataMalformed representation headerMalformed skeleton dataMalformed stream dataMalformed svndiff data in representationMalformed text rep offset line in node-revMerge conflict during commitMerge from foreign repository is not compatible with mergeinfo modificationMerge source requiredMerged via:Mergeinfo element is not a listMergeinfo for '%s' maps to an empty revision rangeMergeinfo parse errorMismatch popping the WC unwind stackMismatched FS module version for '%s': found %d.%d.%d%s, expected %d.%d.%d%sMismatched RA version for '%s': found %d.%d.%d%s, expected %d.%d.%d%sMissing 'dest' attribute in '%s'Missing 'left' attribute in '%s'Missing 'realm' attribute in Authorization headerMissing 'revision' attribute for '%s'Missing 'right' attribute in '%s'Missing 'timestamp' attribute in '%s'Missing changed-path information for '%s' in revision %ldMissing copyfrom-rev attr in add-directory elementMissing copyfrom-rev attr in add-file elementMissing cpath in node-revMissing default entryMissing end of line in wcprops file for '%s'Missing entry terminatorMissing id field in node-revMissing kind field in node-revMissing merge source path '%s'; try with --skip-missing-merge-sourcesMissing name attr in %s elementMissing name attr in absent-directory elementMissing name attr in absent-file elementMissing name attr in add-directory elementMissing name attr in add-file elementMissing name attr in delete-entry elementMissing name attr in open-directory elementMissing name attr in open-file elementMissing name attr in remove-prop elementMissing name attr in revprop elementMissing name attr in set-prop elementMissing node-id in node-revMissing path argumentMissing path attr in resource elementMissing propname and repository path argumentsMissing propname argumentMissing propname or repository path argumentMissing repository path argumentMissing required node revision IDMissing required revision specificationMissing rev attr in open-directory elementMissing rev attr in open-file elementMissing rev attr in target-revision elementMissing revisionMissing revision attr in delete-entry elementMissing revision attr in open-directory elementMissing revision attr in open-file elementMissing revision attr in open-root elementMissing revision attr in target-revision elementModifiedModified: %s Modified: %s%sModule for accessing a repository on local disk.Module for accessing a repository using the svn network protocol.Module for accessing a repository using the svn network protocol. - with Cyrus SASL authenticationModule for accessing a repository via WebDAV protocol using Neon.Module for accessing a repository via WebDAV protocol using serf.Module for working with a Berkeley DB repository.Module for working with a plain file (FSFS) repository.Move and/or rename something in working copy or repository. usage: move SRC... DST When moving multiple sources, they will be added as children of DST, which must be a directory. Note: this subcommand is equivalent to a 'copy' and 'delete'. Note: the --revision option has no use and is deprecated. SRC and DST can both be working copy (WC) paths or URLs: WC -> WC: move and schedule for addition (with history) URL -> URL: complete server-side rename. All the SRCs must be of the same type. Moves between the working copy and the repository are not supportedMoving a path from one changelist to anotherMultiple revision arguments encountered; can't specify -c twice, or both -c and -rMultiple revision arguments encountered; try '-r N:M' instead of '-r N -r M'Must specify host and port for memcache server '%s'Must specify the revision as a number, a date or 'HEAD' when operating on a revision propertyMutually exclusive arguments specifiedNULL mergeinfo NULL mergeinfo catalog Name does not refer to a filesystem directoryName does not refer to a filesystem fileName is not a single path componentName: %s Negative expiration date passed to svn_fs_lockNegative revision number found parsing '%s'Neon was unable to parse URL '%s'Network connection closed unexpectedlyNetwork read/write errorNetwork socket initialization failedNew entry name required when importing a fileNo '.' entry in: '%s'No auth file path availableNo authentication provider availableNo changes to property '%s' on '%s' No changes to property '%s' on revision %ld No commits in repositoryNo common parent found, unable to operate on disjoint argumentsNo copy with id '%s' in filesystem '%s'No created pathNo default entry in directory '%s'No editor found.No editor found; leaving all conflicts.No external editor availableNo external merge tool availableNo fetch_func supplied to update_editorNo lock on path '%s' in filesystem '%s'No lock token providedNo merge tool found. No merge tool found; leaving all conflicts.No part of path '%s' was found in repository HEADNo pathname preceding ':'No paths to unlock providedNo record in 'checksum-reps' table for checksum '%s' in filesystem '%s'No record in 'node-origins' table for node id '%s' in filesystem '%s'No such XML tag attributeNo such entry: '%s'No such representation '%s'No such revision %ldNo such revision %ld in filesystem '%s'No such transactionNo token given for path '%s' in filesystem '%s'No transaction named '%s' in filesystem '%s'No user associated with filesystemNo username is currently associated with filesystem '%s'No valid copyfrom revision in filtered streamNo valid revision range 'end' in filtered streamNo valid revision range 'start' in filtered streamNo versioned parent directoriesNo write-lock in '%s'Node Kind: directory Node Kind: file Node Kind: none Node Kind: unknown Node origin for '%s' exists in filesystem '%s' with a different value (%s) than what we were about to store (%s)Node origin for '%s' exists with a different value (%s) than what we were about to store (%s)Node-revision #'%s' claims to have mergeinfo but doesn'tNode-revision '%s' claims to have mergeinfo but doesn'tNode-revision '%s' claims to sit atop a tree containing mergeinfo but is not a directoryNode-revision '%s@%ld' claims to have mergeinfo but doesn'tNon-ASCII character (code %d) detected, and unable to convert to/from UTF-8Non-numeric change argument (%s) given to -cNon-numeric limit argument givenNon-string as part of file contentsNone of the environment variables SVN_EDITOR, VISUAL or EDITOR are set, and no 'editor-cmd' run-time configuration option was foundNot all required revisions are specifiedNot authorized to open root of edit operationNot enough arguments givenNot enough arguments providedNull rep, but offset past zero alreadyNumber is larger than maximumObject is not a revision rootObject is not a transaction rootObstructed updateOne or more conflicts were produced while merging r%ld:%ld into '%s' -- resolve all conflicts and rerun the merge to apply the remaining unmerged revisionsOnly SHA1 checksums can be used as keys in the checksum-reps table. Only SHA1 checksums can be used as keys in the rep_cache table. Only diffs between a path's text-base and its working files are supported at this timeOnly one revision allowedOnly relative paths can be specified after a URLOperation does not apply to binary fileOperation does not apply to directoryOperation does not support multiple sourcesOption --tunnel-user is only valid in tunnel mode. Output the content of specified files or URLs with revision and author information in-line. usage: blame TARGET[@REV]... If specified, REV determines in which revision the target is first looked up. Output the content of specified files or URLs. usage: cat TARGET[@REV]... If specified, REV determines in which revision the target is first looked up. Owner: %s PIN for token "%s" in slot "%s"Packing shard %s...Pass contents of file ARG as additional argsPassphrase for '%s': Password for '%s' GNOME keyring: Password for '%s': Path '%s' already existsPath '%s' already exists, but is not a directoryPath '%s' contains '.' or '..' elementPath '%s' does not existPath '%s' does not exist in revision %ldPath '%s' doesn't exist in HEAD revisionPath '%s' doesn't exist in revision %ldPath '%s' ends in '%s', which is unsupported for this operationPath '%s' has no committed revisionPath '%s' is already locked by user '%s' in filesystem '%s'Path '%s' is no longer a member of a changelist. Path '%s' is not a URLPath '%s' is not a directoryPath '%s' is not a filePath '%s' is not in UTF-8Path '%s' is not in the working copyPath '%s' is now a member of changelist '%s'. Path '%s' isn't locked. Path '%s' must be an immediate child of the directory '%s'Path '%s' not found in head revisionPath '%s' not found in revision %ldPath '%s' not presentPath has no lock tokenPath is already lockedPath is not a stringPath is not a working copy directoryPath is not a working copy filePath is not an immediate child of the specified directoryPath is not lockedPath syntax not supported in this contextPath: %s Pathname not terminated by ':'Peg revision must precede end revisionPlease type 'yes' or 'no': Premature EOF seen from serverPremature end of content data in dumpstreamPrint the status of working copy files and directories. usage: status [PATH...] With no args, print only locally modified items (no network access). With -q, print only summary information about locally modified items. With -u, add working revision and server out-of-date information. With -v, print full revision information on every item. The first seven columns in the output are each one character wide: First column: Says if item was added, deleted, or otherwise changed ' ' no modifications 'A' Added 'C' Conflicted 'D' Deleted 'I' Ignored 'M' Modified 'R' Replaced 'X' an unversioned directory created by an externals definition '?' item is not under version control '!' item is missing (removed by non-svn command) or incomplete '~' versioned item obstructed by some item of a different kind Second column: Modifications of a file's or directory's properties ' ' no modifications 'C' Conflicted 'M' Modified Third column: Whether the working copy directory is locked ' ' not locked 'L' locked Fourth column: Scheduled commit will contain addition-with-history ' ' no history scheduled with commit '+' history scheduled with commit Fifth column: Whether the item is switched or a file external ' ' normal 'S' the item has a Switched URL relative to the parent 'X' a versioned file created by an eXternals definition Sixth column: Repository lock token (without -u) ' ' no lock token 'K' lock token present (with -u) ' ' not locked in repository, no lock token 'K' locked in repository, lock toKen present 'O' locked in repository, lock token in some Other working copy 'T' locked in repository, lock token present but sTolen 'B' not locked in repository, lock token present but Broken Seventh column: Whether the item is the victim of a tree conflict ' ' normal 'C' tree-Conflicted If the item is a tree conflict victim, an additional line is printed after the item's status line, explaining the nature of the conflict. The out-of-date information appears in the ninth column (with -u): '*' a newer revision exists on the server ' ' the working copy is up to date Remaining fields are variable width and delimited by spaces: The working revision (with -u or -v) The last committed revision and last committed author (with -v) The working copy path is always the final field, so it can include spaces. Example output: svn status wc M wc/bar.c A + wc/qax.c svn status -u wc M 965 wc/bar.c * 965 wc/foo.c A + 965 wc/qax.c Status against revision: 981 svn status --show-updates --verbose wc M 965 938 kfogel wc/bar.c * 965 922 sussman wc/foo.c A + 965 687 joe wc/qax.c 965 687 joe wc/zig.c Status against revision: 981 svn status M wc/bar.c ! C wc/qaz.c > incoming edit, local missing D wc/qax.c Print the value of a property on files, dirs, or revisions. usage: 1. propget PROPNAME [TARGET[@REV]...] 2. propget PROPNAME --revprop -r REV [TARGET] 1. Prints versioned props. If specified, REV determines in which revision the target is first looked up. 2. Prints unversioned remote prop on repos revision. TARGET only determines which repository to access. By default, this subcommand will add an extra newline to the end of the property values so that the output looks pretty. Also, whenever there are multiple paths involved, each property value is prefixed with the path with which it is associated. Use the --strict option to disable these beautifications (useful when redirecting a binary property value to a file, but available only if you supply a single TARGET to a non-recursive propget operation). Problem on first log entry in a working copyProblem running logProcess '%s' failed (exitwhy %d)Process '%s' returned error exitcode %dProp diffs element not a listProperties on '%s': Property '%s' is an entry propertyProperty '%s' is not a regular propertyProperty '%s' not found on path '%s' in revision %ldProperty '%s' not found on path '%s' in transaction %sProperty '%s' not found on revision %ldProperty not foundProplist element not a listProtocol error: the MERGE response for the '%s' resource did not return all of the properties that we asked for (and need to complete the commit)Protocol error: we told the server not to auto-merge any resources, but it said that '%s' was mergedPut files and directories under version control, scheduling them for addition to repository. They will be added in next commit. usage: add PATH... Python exception has been set with the errorQuerying mergeinfo requires version %d of the FSFS filesystem schema; filesystem '%s' uses only version %dRA layer didn't receive requested OPTIONS infoRA layer failed to create HTTP requestRA layer failed to fetch propertiesRA layer failed to init socket layerRA layer file already existsRA layer request failedREPORT response handling failed to complete the editor driveREVISION PATH -------- ---- REVISION PATH -------- --------- Ran out of unique namesRange list parsing ended before hitting newlineRead access denied for root of editRead error in pipeReading '%s'Reading from stdin is disallowedReading one svndiff window read beyond the end of the representationRecovery encountered a deltified directory representationRecovery encountered a non-directory nodeRecursively clean up the working copy, removing locks, resuming unfinished operations, etc. usage: cleanup [PATH...] Reference to non-existent node '%s' in filesystem '%s'Reintegrate can only be used if revisions %ld through %ld were previously merged from %s to the reintegrate source, but this is not the case: %sRelative source revision %ld is not available in current repositoryRelocate can only change the repository part of an URLRemove 'conflicted' state on working copy files or directories. usage: resolved PATH... Note: this subcommand does not semantically resolve conflicts or remove conflict markers; it merely removes the conflict-related artifact files and allows PATH to be committed again. It has been deprecated in favor of running 'svn resolve --accept working'. Remove a property from files, dirs, or revisions. usage: 1. propdel PROPNAME [PATH...] 2. propdel PROPNAME --revprop -r REV [TARGET] 1. Removes versioned props in working copy. 2. Removes unversioned remote prop on repos revision. TARGET only determines which repository to access. Remove files and directories from version control. usage: 1. delete PATH... 2. delete URL... 1. Each item specified by a PATH is scheduled for deletion upon the next commit. Files, and directories that have not been committed, are immediately removed from the working copy unless the --keep-local option is given. PATHs that are, or contain, unversioned or modified items will not be removed unless the --force option is given. 2. Each item specified by a URL is deleted from the repository via an immediate commit. Remove revisions emptied by filtering.Removed lock on '%s'. Removing '%s' from changelist '%s'.Renumber revisions left after filtering.Rep '%s' both mutable and non-fulltextRep '%s' is not mutableRep contents are too large: got %s, limit is %sReplacing %s Repository '%s' is not initialized for synchronizationRepository Root: %s Repository URL required when importingRepository UUID '%s' doesn't match expected UUID '%s'Repository UUID does not match expected UUIDRepository UUID: %s Repository access is needed for this operationRepository access method not implementedRepository argument requiredRepository argument required Repository creation failedRepository has been movedRepository has no UUIDRepository has not been enabled to accept revision propchanges; ask the administrator to create a pre-revprop-change hookRepository lock acquired. Please wait; recovering the repository may take some time... Repository lock acquired. Please wait; upgrading the repository may take some time... Repository moved permanently to '%s'; please relocateRepository moved temporarily to '%s'; please relocateRepository root URL does not match expected root URLRepository upgrade is not supportedRepresentation is being writtenRepresentation is not of type 'delta'Representation key for checksum '%%s' exists in filesystem '%%s', with different value (%%ld,%%%s,%%%s,%%%s) than what we were about to store(%%ld,%%%s,%%%s,%%%s)Representation key for checksum '%s' exists in filesystem '%s'.Request depth 'exclude' not supportedReserved directory name in command line argumentsResolve conflicts on working copy files or directories. usage: resolve --accept=ARG [PATH...] Note: the --accept option is currently required. Resolved conflicted state of '%s' Resource is not under version control.Restore pristine working copy file (undo most local edits). usage: revert PATH... Note: this subcommand does not require network access, and resolves any conflicted states. However, it does not restore removed directories. Restored '%s' Retrieval of mergeinfo unsupported by '%s'Reverted '%s' Revision %ld committed as %ld. Revision %ld doesn't match existing revision %ld in '%s'Revision %ld has a non-file where its revprops file should beRevision %ld has a revs file but no revprops fileRevision %ld skipped. Revision being currently copied (%ld), last merged revision (%ld), and destination HEAD (%ld) are inconsistent; have you committed to the destination without using svnsync?Revision entry not a listRevision file '%s' does not exist, and r%ld is not packedRevision file lacks trailing newlineRevision property '%s' not allowed in this contextRevision property pair is emptyRevision range is not allowedRevision type requires a working copy path, not a URLRevision: %ld Revisions must not be greater than the youngest revision (%ld)Revisions renumbered as follows: Revprop changeRoot object must be a transaction rootSHA1 checksum mismatch on rep '%s': expected: %s actual: %s SQLite compiled for %s, but running with %sSQLite errorSQLite is required to be compiled and run in thread-safe modeSSL is not supportedSafe data '%s' was followed by non-ASCII byte %d: unable to convert to/from UTF-8Schedule: add Schedule: delete Schedule: normal Schedule: replace Schema format %d not recognizedScope not allowed in memcache server '%s'Second revision requiredSelect: (p) postponeSelect: (p) postpone, (mf) mine-full, (tf) theirs-full, (h) help:Send changes from your working copy to the repository. usage: commit [PATH...] A log message must be provided, but it can be empty. If it is not given by a --message or --file option, an editor will be started. If any targets are (or contain) locked items, those will be unlocked after a successful commit. Sending %s Server SSL certificate untrustedServer can only replay from the root of a repositoryServer did not send repository rootServer does not support custom revprops via logServer does not support date-based operationsServer does not support edit pipeliningServer does not support locking featuresServer does not support retrieving information about the repository rootServer doesn't support setting arbitrary revision properties during commitServer doesn't support the get-lock commandServer doesn't support the lock commandServer doesn't support the replay commandServer doesn't support the replay-range commandServer doesn't support the unlock commandServer only supports versions up to %dServer requires minimum version %dServer response missing the expected deadprop-count propertyServer sent unexpected return value (%d %s) in response to %s request for '%s'Session is rooted at '%s' but the repos root is '%s'Set new value for property '%s' on '%s' Set new value for property '%s' on revision %ld Set the value of a property on files, dirs, or revisions. usage: 1. propset PROPNAME PROPVAL PATH... 2. propset PROPNAME --revprop -r REV PROPVAL [TARGET] 1. Changes a versioned file or directory property in a working copy. 2. Changes an unversioned property on a repository revision. (TARGET only determines which repository to access.) The value may be provided with the --file option instead of PROPVAL. Note: svn recognizes the following special versioned properties but will store any arbitrary properties set: svn:ignore - A newline separated list of file glob patterns to ignore. svn:keywords - Keywords to be expanded. Valid keywords are: URL, HeadURL - The URL for the head version of the object. Author, LastChangedBy - The last person to modify the file. Date, LastChangedDate - The date/time the object was last modified. Rev, Revision, - The last revision the object changed. LastChangedRevision Id - A compressed summary of the previous 4 keywords. Header - Similar to Id but includes the full URL. svn:executable - If present, make the file executable. Use 'svn propdel svn:executable PATH...' to clear. svn:eol-style - One of 'native', 'LF', 'CR', 'CRLF'. svn:mime-type - The mimetype of the file. Used to determine whether to merge the file, and how to serve it from Apache. A mimetype beginning with 'text/' (or an absent mimetype) is treated as text. Anything else is treated as binary. svn:externals - A newline separated list of module specifiers, each of which consists of a relative directory path, optional revision flags and an URL. The ordering of the three elements implements different behavior. Subversion 1.4 and earlier only support the following formats and the URLs cannot have peg revisions: foo http://example.com/repos/zig foo/bar -r 1234 http://example.com/repos/zag Subversion 1.5 and greater support the above formats and the following formats where the URLs may have peg revisions: http://example.com/repos/zig foo -r 1234 http://example.com/repos/zig foo/bar Relative URLs are supported in Subversion 1.5 and greater for all above formats and are indicated by starting the URL with one of the following strings ../ to the parent directory of the extracted external ^/ to the repository root // to the scheme / to the server root The ambiguous format 'relative_path relative_path' is taken as 'relative_url relative_path' with peg revision support. svn:needs-lock - If present, indicates that the file should be locked before it is modified. Makes the working copy file read-only when it is not locked. Use 'svn propdel svn:needs-lock PATH...' to clear. The svn:keywords, svn:executable, svn:eol-style, svn:mime-type and svn:needs-lock properties cannot be set on a directory. A non-recursive attempt will fail, and a recursive attempt will set the property only on the file children of the directory. Setting property '%s' on non-local target '%s' is not supportedSetting property on non-local target '%s' needs a base revisionSetting property recursively on non-local target '%s' is not supportedShow the log messages for a set of revision(s) and/or file(s). usage: 1. log [PATH] 2. log URL[@REV] [PATH...] 1. Print the log messages for a local PATH (default: '.'). The default revision range is BASE:1. 2. Print the log messages for the PATHs (default: '.') under URL. If specified, REV determines in which revision the URL is first looked up, and the default revision range is REV:1; otherwise, the URL is looked up in HEAD, and the default revision range is HEAD:1. Multiple '-c' or '-r' options may be specified (but not a combination of '-c' and '-r' options), and mixing of forward and reverse ranges is allowed. With -v, also print all affected paths with each log message. With -q, don't print the log message body itself (note that this is compatible with -v). Each log message is printed just once, even if more than one of the affected paths for that revision were explicitly requested. Logs follow copy history by default. Use --stop-on-copy to disable this behavior, which can be useful for determining branchpoints. Examples: svn log svn log foo.c svn log http://www.example.com/repo/project/foo.c svn log http://www.example.com/repo/project foo.c bar.c Size of uncompressed data does not match stored original lengthSkip missing merge sources.Skipped '%s' Skipped missing target: '%s' Skipping binary file: '%s' Something is wrong with the log message's contentsSorry, svn_client_diff4 was called in a way that is not yet supportedSource leftSource '%s' is not a directorySource Repository UUID: %s Source URL '%s' is from foreign repository; leaving it as a disjoint WCSource URL: %s Source and dest appear not to be in the same repository (src: '%s'; dst: '%s')Source rightSource url '%s' is from different repositorySpecial code for wrapping server errors to report to clientStandard properties can't be set explicitly as revision propertiesStart revision %ld is greater than end revision %ldStart revision must precede end revisionStatus against revision: %6ld Storage of non-regular property '%s' is disallowed through the repository interface, and could indicate a bug in your clientStore passphrase unencrypted (yes/no)? Store password unencrypted (yes/no)? Strict output of property values only available for single-target, non-recursive propget operationsString does not represent a node or node-rev-idString length larger than maximumSubcommand '%s' doesn't accept option '%s' Type 'svn help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnadmin help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svndumpfilter help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnlook help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnsync help %s' for usage. Subcommand argument required Subversion is a tool for version control. For additional information, see http://subversion.tigris.org/ Successful edit status returned too soonSuccessor id '%s' (for '%s') already exists in filesystem '%s'Sum of subblock sizes larger than total block content lengthSummarizing diff can only compare repository to repositorySummary of conflicts in external item: Summary of conflicts: Svndiff compressed data is invalidSvndiff contains corrupt window headerSvndiff data contains backward-sliding source viewSvndiff data contains corrupt windowSvndiff data contains invalid instructionSvndiff data ends unexpectedlySvndiff data has invalid headerSvndiff has backwards-sliding source viewsSvndiff has invalid headerSvndiff source length inconsistencySymbolic links are not supported on this platformSyntax error in native-eol argument '%s'Syntax error in revision argument '%s'Syntax error parsing revision '%s'Target lists to diff may not contain both working copy paths and URLsTarget path '%s' does not existTest failedTest skippedText Last UpdatedText delta chunk not a stringThe %s request returned invalid XML in the response: %s (%s)The '%s' feature requires version %d of the filesystem schema; filesystem '%s' uses only version %dThe '--transaction' (-t) and '--revision' (-r) arguments cannot co-existThe CHECKOUT response did not contain a 'Location:' headerThe EDITOR, SVN_EDITOR or VISUAL environment variable or 'editor-cmd' run-time configuration option is empty or consists solely of whitespace. Expected a shell command.The MERGE property response had an error statusThe OPTIONS request returned invalid XML in the response: %s (%s)The OPTIONS response did not include the requested activity-collection-set valueThe OPTIONS response did not include the requested activity-collection-set; this often means that the URL is not WebDAV-enabledThe OPTIONS response did not include the requested baseline-collection valueThe OPTIONS response did not include the requested checked-in valueThe OPTIONS response did not include the requested resourcetype valueThe OPTIONS response did not include the requested version-controlled-configuration valueThe OPTIONS response did not include the requested version-name valueThe PROPFIND response did not include the requested resourcetype valueThe SVN_MERGE environment variable is empty or consists solely of whitespace. Expected a shell command. The URL '%s' has a different repository root than its parentThe UUID property was not found on the resource or any of its parentsThe VCC property was not found on the resourceThe environment variable SVN_MERGE and the merge-tool-cmd run-time configuration option were not set. The external relative URL '%s' cannot have backpaths, i.e. '..'The file '%s' changed unexpectedly during diffThe file external from '%s' cannot be written to '%s' while '%s' remains in conflictThe file external from '%s' cannot overwrite the existing versioned item at '%s'The file-revs report didn't contain any revisionsThe following repository access (RA) modules are available: The following repository back-end (FS) modules are available: The generated transaction name is too longThe get-file-revs command didn't return any revisionsThe latest repos revision is %ld. The location for '%s' for revision %ld does not exist in the repository or refers to an unrelated objectThe lock comment is a pathname (was -F intended?); use '--force-log' to overrideThe log message file is under version controlThe log message is a pathnameThe log message is a pathname (was -F intended?); use '--force-log' to overrideThe operation was interruptedThe path was not part of a repositoryThe relative-path property was not found on the resourceThe repository at '%s' has uuid '%s', but the WC has '%s'The repository is locked, perhaps for db recoveryThe request response contained at least one errorThe response contains a non-conforming HTTP status lineThe root directory cannot be deletedThe service failed to startThe service failed to start; an internal error occurred while starting the serviceThe specified diff option is not supportedThe specified transaction is not mutableThere is already a versioned item '%s'There is no change 0They want to change the property value to '%s', you want to delete the property. They want to delete the property, you want to change the value to '%s'. This client is too old to work with working copy '%s'. You need to get a newer Subversion client, or to downgrade this working copy. See http://subversion.tigris.org/faq.html#working-copy-format-change for details.This is an empty revision for padding.To turn off the %s property, use 'svn propdel'; setting the property to '%s' will not turn it off.Token '%s' does not point to any existing lock in filesystem '%s'Too many arguments givenToo many arguments to import commandToo many nested itemsTransaction '%s' is not based on a revision; how oddTransaction '%s' out-of-date with respect to revision '%s'Transaction '%s' removed. Transaction aborted, but cleanup failedTransaction cleanup failedTransaction is deadTransaction is dead: '%s'Transaction is not deadTransaction is not dead: '%s'Transaction is out of dateTransaction out of dateTransmitting file data Traversal of '%s' found no ambient depthTree conflictTried a versioning operation on an unversioned resourceTried to change an immutable representationTry 'svn add' or 'svn add --non-recursive' instead?Try 'svn help' for more infoTry 'svn mkdir --parents' instead?Try 'svn revert --depth infinity' instead?Try 'svnadmin help' for more infoTry 'svndumpfilter help' for more infoTry 'svnlook help' for more infoTry 'svnsync help' for more infoTrying to add new property '%s' with value '%s', but property already exists with value '%s'.Trying to change property '%s' from '%s' to '%s', but it has been locally deleted.Trying to change property '%s' from '%s' to '%s', but property already exists with value '%s'.Trying to change property '%s' from '%s' to '%s', but property has been locally added with value '%s'.Trying to change property '%s' from '%s' to '%s', but the property does not exist.Trying to change property '%s' from '%s' to '%s', but the property has been locally changed from '%s' to '%s'.Trying to create property '%s' with value '%s', but it has been locally deleted.Trying to delete property '%s' with value '%s' but it has been modified from '%s' to '%s'.Trying to delete property '%s' with value '%s' but the local value is '%s'.Trying to use an unsupported featureTunnel scheme %s requires environment variable %s to be definedTwo top-level reports with no targetTwo versioned resources are unrelatedType '%s --help' for usage. Type '%s help' for usage. Type 'svnversion --help' for usage. URL '%s' at revision %ld doesn't existURL '%s' at revision %ld is not a file or a directoryURL '%s' contains a '..' elementURL '%s' does not begin with a schemeURL '%s' doesn't existURL '%s' doesn't match existing URL '%s' in '%s'URL '%s' is malformed or the scheme or host or path is missingURL '%s' is not a child of repository root URL '%s'URL '%s' is not a child of the session's repository root URL '%s'URL '%s' is not properly URI-encodedURL '%s' non-existent in revision %ldURL '%s' non-existent in that revisionURL '%s' of existing directory '%s' does not match expected URL '%s'URL '%s' of existing file '%s' does not match expected URL '%s'URL '%s' refers to a directoryURL '%s' refers to a file, not a directoryURL access forbidden for unknown reasonURL has no scheme: '%s'URL: %s URLs have no scheme ('%s' and '%s')UUID Token: %s UUID mismatch: existing directory '%s' was checked out from a different repositoryUUID mismatch: existing file '%s' was checked out from a different repositoryUnable to check path existence for '%s'Unable to create transaction directory in '%s' for revision %ldUnable to extract data from response headerUnable to find repository location for '%s' in revision %ldUnable to locate auth fileUnable to lock '%s'Unable to lock/unlock across multiple repositoriesUnable to make any directoriesUnable to make name for '%s'Unable to open an ra_local session to URLUnable to open auth file for readingUnable to open auth file for writingUnable to open repository '%s'Unable to open root of editUnable to parse URL '%s'Unable to parse overlapping revision ranges '%s' and '%s' with different inheritance typesUnable to parse reversed revision range '%ld-%ld'Unable to parse revision range '%ld-%ld' with same start and end revisionsUndefined tunnel scheme '%s'Unexpected EOF on streamUnexpected EOF writing contentsUnexpected end of entryUnexpected end of svndiff inputUnexpected immutable node at '%s'Unexpected node kind %d for '%s'Unexpected node kind foundUnexpected or unknown property kindUnexpected server response to authenticationUnexpectedly found '%s': path is marked 'missing'Unknown FS typeUnknown FS type '%s'Unknown XML encoding: '%s'Unknown authorization methodUnknown changelistUnknown command '%s'Unknown command: '%s' Unknown entry kind for '%s'Unknown enumeration value in tree conflict descriptionUnknown error adding server to memcacheUnknown error creating apr_memcache_tUnknown error creating memcache serverUnknown hostname '%s'Unknown kind for noderev in cache: '%c'Unknown memcached error while readingUnknown memcached error while writingUnknown node kind for '%s'Unknown node kind for representation '%s'Unknown node type in cache: '%c'Unknown or unexpected kind for path '%s'Unknown or unversionable type for '%s'Unknown revprop word '%s' in log commandUnknown status '%s' in command responseUnknown status for lock commandUnknown status for unlock commandUnknown svn protocol commandUnknown svn_node_kindUnlockUnlock request failed: %d %sUnlock response not a listUnlock succeeded, but post-unlock hook failedUnlock working copy paths or URLs. usage: unlock TARGET... Use --force to break the lock. Unmergeable scheduling requested on an entryUnreadable path encountered; access deniedUnrecognized URL scheme '%s'Unrecognized URL scheme for '%s'Unrecognized binary data encoding; can't decodeUnrecognized file in argument of --config-optionUnrecognized format for the relative external URL '%s'Unrecognized line ending styleUnrecognized line ending style for '%s'Unrecognized logfile element '%s' in '%s'Unrecognized node kind: '%s'Unrecognized node-action on node '%s'Unrecognized record type in streamUnrecognized revision type requested for '%s'Unrecognized stream dataUnspecified error messageUnsupported FS formatUnsupported FS loader version (%d) for bdbUnsupported FS loader version (%d) for fsfsUnsupported RA loader version (%d) for ra_localUnsupported RA loader version (%d) for ra_neonUnsupported RA loader version (%d) for ra_serfUnsupported RA loader version (%d) for ra_svnUnsupported RA plugin ABI versionUnsupported checksum typeUnsupported dumpfile version: %dUnsupported node kind for path '%s'Unsupported report depth '%s'Unsupported repository versionUnsupported schema found in SQLite dbUnsupported working copy formatUnterminated ID in cacheUnversioned properties on revision %ld: Update complete. Update the working copy to a different URL. usage: 1. switch URL[@PEGREV] [PATH] 2. switch --relocate FROM TO [PATH...] 1. Update the working copy to mirror a new URL within the repository. This behavior is similar to 'svn update', and is the way to move a working copy to a branch or tag within the same repository. If specified, PEGREV determines in which revision the target is first looked up. If --force is used, unversioned obstructing paths in the working copy do not automatically cause a failure if the switch attempts to add the same path. If the obstructing path is the same type (file or directory) as the corresponding path in the repository it becomes versioned but its contents are left 'as-is' in the working copy. This means that an obstructing directory's unversioned children may also obstruct and become versioned. For files, any content differences between the obstruction and the repository are treated like a local modification to the working copy. All properties from the repository are applied to the obstructing path. Use the --set-depth option to set a new working copy depth on the targets of this operation. Currently, the depth of a working copy directory can only be increased (telescoped more deeply); you cannot make a directory more shallow. 2. Rewrite working copy URL metadata to reflect a syntactic change only. This is used when repository's root URL changes (such as a scheme or hostname change) but your working copy still reflects the same directory within the same repository. See also 'svn help update' for a list of possible characters reporting the action taken. Updated external to revision %ld. Updated to revision %ld. Upgrade of this repository is not supported; consider dumping and loading the data elsewhereUpgrade of this repository's underlying versioned filesystem is not supported; consider dumping and loading the data elsewhereUse --force to override this restrictionUse of two URLs is not compatible with mergeinfo modificationUser %s does not own lock on path '%s' (currently locked by %s)User '%s' is trying to use a lock owned by '%s' in filesystem '%s'Username does not match lock ownerUsername: Valid UTF-8 data (hex:%s) followed by invalid UTF-8 sequence (hex:%s)Value will not be set unless forcedVersion file format not correctVersion mismatch in '%s': found %d.%d.%d%s, expected %d.%d.%d%sWARNING: Referencing data in revision %ld, which is older than the oldest WARNING: dumped revision (%ld). Loading this dump into an empty repository WARNING: will fail. Waiting on repository lock; perhaps another process has it open? When specifying working copy paths, only one target may be givenWhile preparing '%s' for commitWindows service mode (Service Control Manager)Working copy '%s' is not lockedWorking copy '%s' lockedWorking copy and merge source not ready for reintegrationWorking copy format of '%s' is too old (%d); please check out your working copy againWorking copy is corruptWorking copy is not up-to-dateWorking copy not locked; this is probably a bug, please reportWorking copy path '%s' does not exist in repositoryWorking copy text base is corruptWrite denied: not authorized to read all of revision %ldWrite errorWrite-lock stolen in '%s'Wrong number of targets specifiedWrong or unexpected property valueXML data was not well-formedXML parser failed in '%s'You must specify exactly one of -d, -i, -t or -X. You must specify exactly one of -d, -i, -t, --service or -X. Your .svn/tmp directory may be missing or corrupt; run 'svn cleanup' and try againYour commit message was left in a temporary file:[Error output could not be read.][Error output could not be translated from the native locale to UTF-8.]accept unknown SSL server certificates without prompting (but only with '--non-interactive')addadd intermediate parentsallocating new copy ID (getting 'next-key')allocating new node ID (getting 'next-key')allocating new representation (getting next-key)allocating new representation reuse ID (getting 'next-key')apr memcache library not availableauthorization failedauthorization failed: %sbe verboseblame of the WORKING revision is not supportedbumping next copy keybumping next node ID keybumping next representation keybypass the repository hook systemcall hook after changing revision propertycall hook before changing revision propertycall post-commit hook after committing revisionscall pre-commit hook before committing revisionscannot assign with 'with-revprop' option (drop the '=')closing changes cursorconnect to source repository with password ARGconnect to source repository with username ARGconnect to sync repository with password ARGconnect to sync repository with username ARGcould not connect to servercreating changecreating cursor for reading a stringcreating cursor for reading changesdaemon modedeletedeleting changesdeleting entry from 'copies' tabledeleting entry from 'nodes' tabledeleting representationdescend recursively, same as --depth=infinitydirdisable automatic log file removal [Berkeley DB]disable automatic propertiesdisable fsync at transaction commit [Berkeley DB]display this helpdisplay update informationdisregard default and svn:ignore property ignoresdo no interactive promptingdo not cache authentication tokensdo not cross copies while traversing historydo not output the trailing newlinedo not print differences for added filesdo not print differences for deleted filesdon't delete changelists after commitdon't unlock the targetsdone. dump incrementallyeditempty mergeinfo empty mergeinfo catalog enable automatic propertiesexported%sfetching changesfileforce operation to runforce read only, overriding repository config fileforce validity of lock comment sourceforce validity of log message sourcegeneral usage: svnadmin SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...] Type 'svnadmin help ' for help on a specific subcommand. Type 'svnadmin --version' to see the program version and FS modules. Available subcommands: general usage: svndumpfilter SUBCOMMAND [ARGS & OPTIONS ...] Type 'svndumpfilter help ' for help on a specific subcommand. Type 'svndumpfilter --version' to see the program version. Available subcommands: general usage: svnlook SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...] Note: any subcommand which takes the '--revision' and '--transaction' options will, if invoked without one of those options, act on the repository's youngest revision. Type 'svnlook help ' for help on a specific subcommand. Type 'svnlook --version' to see the program version and FS modules. Available subcommands: general usage: svnsync SUBCOMMAND DEST_URL [ARGS & OPTIONS ...] Type 'svnsync help ' for help on a specific subcommand. Type 'svnsync --version' to see the program version and RA modules. Available subcommands: get repository uuidgive output suitable for concatenationignore ancestry when calculating mergesignore any repos UUID found in the streamignore externals definitionsinetd modeinvalid 'accept' ARGkeep path in working copylast changed rather than current revisionslimit operation by depth ARG ('empty', 'files', 'immediates', or 'infinity')listen hostname or IP address [mode: daemon, listen-once]listen hostname or IP address [mode: daemon, service, listen-once]listen port [mode: daemon, listen-once]listen port [mode: daemon, service, listen-once]listen-once mode (useful for debugging)load at specified directory in repositorylocal %s, incoming %s upon %slump-merge all of source URL's unmerged changesmake intermediate directoriesmark revisions as merged (use with -r)maximum number of history entriesmaximum number of log entriesmergemissingmissing --accept optionnext-id file corruptnono parent with copyfrom information found above '%s'no progress (only errors) to stderrnonenotice ancestry when calculating differencesobsolete; try --depth=files or --depth=immediatesobstructionoperate on a revision property (use with -r or -t)operate on a revision property (use with -r)operate on single directory onlyoperate only on members of changelist ARG [aliases: --cl]output in XMLpass contents of file ARG as additional argsprint as little as possibleprint differences against the copy sourceprint extra informationprint nothing, or only summary informationproperty '%s' deleted from '%s'. property '%s' deleted from repository revision %ld property '%s' set on '%s' property '%s' set on repository revision %ld read configuration from file ARGread lock comment from file ARGread log message from file ARGread property value from file ARGread user configuration files from directory ARGreading copyreading filesystem revisionreading node revisionreading representationrelocate via URL-rewritingremove changelist associationremove redundant Berkeley DB log files from source repository [Berkeley DB]retrieve all revision propertiesretrieve no revision propertiesretrieve revision property ARGrevprop '%s' in r%ld has unexpected value in repository (maybe someone else changed it?)revprop '%s' in r%ld is unexpectedly absent in repository (maybe someone else deleted it?)revprop '%s' in r%ld is unexpectedly present in repository (maybe someone else set it?)root of directory to serverun in foreground (useful for debugging) [mode: daemon]set new working copy depth to ARG ('empty', 'exclude', 'files', 'immediates', or 'infinity')set repos UUID to that found in stream, if anyset repository uuidset revision property ARG in new revision using the name[=value] formatset user configuration option in the format: FILE:SECTION:OPTION=[VALUE] For example: servers:global:http-library=serf show a summary of the resultsshow details for copiesshow full paths instead of indenting themshow help on a subcommandshow node revision ids for each pathshow program version informationspecify a password ARGspecify a password ARG (deprecated; see --source-password and --sync-password)specify a username ARGspecify a username ARG (deprecated; see --source-username and --sync-username)specify automatic conflict resolution action ('postpone', 'base', 'mine-conflict', 'theirs-conflict', 'mine-full', 'theirs-full', 'edit', 'launch')specify automatic conflict resolution source ('base', 'working', 'mine-conflict', 'theirs-conflict', 'mine-full', 'theirs-full')specify lock comment ARGspecify log message ARGspecify revision number ARGspecify revision number ARG (or X:Y range)specify transaction name ARGspecify which collection of revisions to display ('merged', 'eligible')storing checksum-reps recordstoring copy recordstoring node revisionstoring node-origins recordstoring representationstoring transaction recordsubcommand argument required svn: run 'svn cleanup' to remove locks (type 'svn help cleanup' for details) svndiff data requested non-existent sourcesvndiff requested position beyond end of streamsvndiff window length is corruptsvnserve log filesvnserve: Root path '%s' does not exist or is not a directory. svnserve: The --service flag is only valid if the process is started by the Service Control Manager. switchsystem('%s') returned %dthe change made by revision ARG (like -r ARG-1:ARG) If ARG is negative this is like -r ARG:ARG-1the change made in revision ARGtimed out waiting for servertreat value as being in charset encoding ARGtry operation but make no changestunnel modetunnel username (default is current uid's name) [mode: tunnel]type of repository: 'fsfs' (default) or 'bdb'unexpected kind for revert-base '%s'unknownunknown capability '%s'unknown operationunversionedupdateusage: 1. svnlook propget REPOS_PATH PROPNAME PATH_IN_REPOS 2. svnlook propget --revprop REPOS_PATH PROPNAME Print the raw value of a property on a path in the repository. With --revprop, print the raw value of a revision property. usage: 1. svnlook proplist REPOS_PATH PATH_IN_REPOS 2. svnlook proplist --revprop REPOS_PATH List the properties of a path in the repository, or with the --revprop option, revision properties. With -v, show the property values too. usage: svn [options] [args] Subversion command-line client, version %s. Type 'svn help ' for help on a specific subcommand. Type 'svn --version' to see the program version and RA modules or 'svn --version --quiet' to see just the version number. Most subcommands take file and/or directory arguments, recursing on the directories. If no arguments are supplied to such a command, it recurses on the current directory (inclusive) by default. Available subcommands: usage: svnadmin crashtest REPOS_PATH Open the repository at REPOS_PATH, then abort, thus simulating a process that crashes while holding an open repository handle. usage: svnadmin create REPOS_PATH Create a new, empty repository at REPOS_PATH. usage: svnadmin deltify [-r LOWER[:UPPER]] REPOS_PATH Run over the requested revision range, performing predecessor delti- fication on the paths changed in those revisions. Deltification in essence compresses the repository by only storing the differences or delta from the preceding revision. If no revisions are specified, this will simply deltify the HEAD revision. usage: svnadmin dump REPOS_PATH [-r LOWER[:UPPER] [--incremental]] Dump the contents of filesystem to stdout in a 'dumpfile' portable format, sending feedback to stderr. Dump revisions LOWER rev through UPPER rev. If no revisions are given, dump all revision trees. If only LOWER is given, dump that one revision tree. If --incremental is passed, the first revision dumped will describe only the paths changed in that revision; otherwise it will describe every path present in the repository as of that revision. (In either case, the second and subsequent revisions, if any, describe only paths changed in those revisions.) usage: svnadmin help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnadmin hotcopy REPOS_PATH NEW_REPOS_PATH Makes a hot copy of a repository. usage: svnadmin list-dblogs REPOS_PATH List all Berkeley DB log files. WARNING: Modifying or deleting logfiles which are still in use will cause your repository to be corrupted. usage: svnadmin list-unused-dblogs REPOS_PATH List unused Berkeley DB log files. usage: svnadmin load REPOS_PATH Read a 'dumpfile'-formatted stream from stdin, committing new revisions into the repository's filesystem. If the repository was previously empty, its UUID will, by default, be changed to the one specified in the stream. Progress feedback is sent to stdout. usage: svnadmin lslocks REPOS_PATH [PATH-IN-REPOS] Print descriptions of all locks on or under PATH-IN-REPOS (which, if not provided, is the root of the repository). usage: svnadmin lstxns REPOS_PATH Print the names of all uncommitted transactions. usage: svnadmin pack REPOS_PATH Possibly compact the repository into a more efficient storage model. This may not apply to all repositories, in which case, exit. usage: svnadmin recover REPOS_PATH Run the recovery procedure on a repository. Do this if you've been getting errors indicating that recovery ought to be run. Berkeley DB recovery requires exclusive access and will exit if the repository is in use by another process. usage: svnadmin rmlocks REPOS_PATH LOCKED_PATH... Unconditionally remove lock from each LOCKED_PATH. usage: svnadmin rmtxns REPOS_PATH TXN_NAME... Delete the named transaction(s). usage: svnadmin setlog REPOS_PATH -r REVISION FILE Set the log-message on revision REVISION to the contents of FILE. Use --bypass-hooks to avoid triggering the revision-property-related hooks (for example, if you do not want an email notification sent from your post-revprop-change hook, or because the modification of revision properties has not been enabled in the pre-revprop-change hook). NOTE: Revision properties are not versioned, so this command will overwrite the previous log message. usage: svnadmin setrevprop REPOS_PATH -r REVISION NAME FILE Set the property NAME on revision REVISION to the contents of FILE. Use --use-pre-revprop-change-hook/--use-post-revprop-change-hook to trigger the revision property-related hooks (for example, if you want an email notification sent from your post-revprop-change hook). NOTE: Revision properties are not versioned, so this command will overwrite the previous value of the property. usage: svnadmin setuuid REPOS_PATH [NEW_UUID] Reset the repository UUID for the repository located at REPOS_PATH. If NEW_UUID is provided, use that as the new repository UUID; otherwise, generate a brand new UUID for the repository. usage: svnadmin upgrade REPOS_PATH Upgrade the repository located at REPOS_PATH to the latest supported schema version. This functionality is provided as a convenience for repository administrators who wish to make use of new Subversion functionality without having to undertake a potentially costly full repository dump and load operation. As such, the upgrade performs only the minimum amount of work needed to accomplish this while still maintaining the integrity of the repository. It does not guarantee the most optimized repository state as a dump and subsequent load would. usage: svnadmin verify REPOS_PATH Verifies the data stored in the repository. usage: svnlook author REPOS_PATH Print the author. usage: svnlook cat REPOS_PATH FILE_PATH Print the contents of a file. Leading '/' on FILE_PATH is optional. usage: svnlook changed REPOS_PATH Print the paths that were changed. usage: svnlook date REPOS_PATH Print the datestamp. usage: svnlook diff REPOS_PATH Print GNU-style diffs of changed files and properties. usage: svnlook dirs-changed REPOS_PATH Print the directories that were themselves changed (property edits) or whose file children were changed. usage: svnlook help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnlook history REPOS_PATH [PATH_IN_REPOS] Print information about the history of a path in the repository (or the root directory if no path is supplied). usage: svnlook info REPOS_PATH Print the author, datestamp, log message size, and log message. usage: svnlook lock REPOS_PATH PATH_IN_REPOS If a lock exists on a path in the repository, describe it. usage: svnlook log REPOS_PATH Print the log message. usage: svnlook tree REPOS_PATH [PATH_IN_REPOS] Print the tree, starting at PATH_IN_REPOS (if supplied, at the root of the tree otherwise), optionally showing node revision ids. usage: svnlook uuid REPOS_PATH Print the repository's UUID. usage: svnlook youngest REPOS_PATH Print the youngest revision number. usage: svnserve [-d | -i | -t | -X | --service] [options] Valid options: usage: svnserve [-d | -i | -t | -X] [options] Valid options: usage: svnsync copy-revprops DEST_URL [REV[:REV2]] Copy the revision properties in a given range of revisions to the destination from the source with which it was initialized. If REV and REV2 are provided, copy properties for the revisions specified by that range, inclusively. If only REV is provided, copy properties for that revision alone. If REV is not provided, copy properties for all revisions previously transferred to the destination. REV and REV2 must be revisions which were previously transferred to the destination. You may use "HEAD" for either revision to mean "the last revision transferred". usage: svnsync help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnsync info DEST_URL Print information about the synchronization destination repository located at DEST_URL. usage: svnsync initialize DEST_URL SOURCE_URL Initialize a destination repository for synchronization from another repository. The destination URL must point to the root of a repository with no committed revisions. The destination repository must allow revision property changes. If the source URL is not the root of a repository, only the specified part of the repository will be synchronized. You should not commit to, or make revision property changes in, the destination repository by any method other than 'svnsync'. In other words, the destination repository should be a read-only mirror of the source repository. usage: svnsync synchronize DEST_URL Transfer all pending revisions to the destination from the source with which it was initialized. usage: svnversion [OPTIONS] [WC_PATH [TRAIL_URL]] Produce a compact 'version number' for the working copy path WC_PATH. TRAIL_URL is the trailing portion of the URL used to determine if WC_PATH itself is switched (detection of switches within WC_PATH does not rely on TRAIL_URL). The version number is written to standard output. For example: $ svnversion . /repos/svn/trunk 4168 The version number will be a single number if the working copy is single revision, unmodified, not switched and with an URL that matches the TRAIL_URL argument. If the working copy is unusual the version number will be more complex: 4123:4168 mixed revision working copy 4168M modified working copy 4123S switched working copy 4123P partial working copy, from a sparse checkout 4123:4168MS mixed revision, modified, switched working copy If invoked on a directory that is not a working copy, an exported directory say, the program will output 'exported'. If invoked without arguments WC_PATH will be the current directory. Valid options: use ARG as diff commanduse ARG as external editoruse ARG as merge commanduse ARG as the newer targetuse ARG as the older targetuse a different EOL marker than the standard system marker for files with the svn:eol-style property set to 'native'. ARG may be one of 'LF', 'CR', 'CRLF'use deltas in dump outputuse format compatible with Subversion versions earlier than 1.4use format compatible with Subversion versions earlier than 1.5use format compatible with Subversion versions earlier than 1.6use strict semanticsuse threads instead of fork [mode: daemon]use/display additional information from merge historywait instead of exit if the repository is in use by another processwrite server process ID to file ARG [mode: daemon, listen-once, service]write server process ID to file ARG [mode: daemon, listen-once]yes||||||| ORIGINALProject-Id-Version: subversion 1.6 Report-Msgid-Bugs-To: dev@subversion.tigris.org POT-Creation-Date: 2009-03-17 14:50+0100 PO-Revision-Date: 2009-03-18 11:08+0100 Last-Translator: Subversion Developers Language-Team: German MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=(n != 1); (e) editieren - zusammengeführte Datei in einem Editor ändern (df) voller Diff - alle Änderungen in der zusammengeführten Datei anzeigen (r) aufgelöst - akzeptieren der zusammengeführten Version der Datei (dc) Konflikte anzeigen - alle Konflikte anzeigen (die zusammengeführte Version ignorieren) (mc) mine-conflict - eigene Version für alle Konflikte akzeptieren (das selbe) (tc) theirs-conflict - fremde Version für alle Konflikte akzeptieren (das selbe) (mf) volle eigene Datei - die eigene Version der kompletten Datei akzeptieren (selbst Nicht-Konflikte) (tf) volle fremde Datei - die fremde Version der kompletten Datei akzeptieren (das selbe) (p) zurückstellen - den Konflikt erst später auflösen (l) starten - Starten eines externen Programms zur Konfliktauflösung (s) alle anzeigen - diese Liste anzeigen --- Änderungsliste »%s«: ------- Neue Revision %ld übertragen (geladen aus Original %ld) >>> ------- Übertrage Revision %ld >>> Revision %ld übertragen. Cyrus-SASL-Authentifizierung ist verfügbar. Fehler: keine Präfixe angegeben. Hole externen Verweis nach »%s« Globale Optionen: Logmeldung unverändert oder nicht angegeben (A)bbrechen, Weiterma(c)hen, (E)ditieren: Hole Status des externen Verweises in »%s« Wiederherstellung vollständig abgeschlossen. Aktualisierung abgeschlossen. Gültige Optionen: Warnung: %s * Füge Pfad hinzu: %s ... * Lösche Pfad: %s ... * Bearbeite Pfad: %s ... * Ersetze Pfad: %s ... %ld => (verworfen) Zusammengeführt %s:r%s%s Rückgängiges Zusammenführen: %s:r%s%s (p) zurückstellen - den Konflikt erst später auflösen (mf) volle eigene Datei - vorher existierende Daten akzeptieren (Hinzufügungen ignorieren) (tf) volle fremde Datei - eingehende Daten akzeptieren (überschreiben vorher existierender Daten) (h) Hilfe - diese Hilfe anzeigen - behandelt Schema »%s« Eigenschaftskonflikte: %u Übersprungene Pfade: %u Textkonflikte: %u Baumkonflikte: %u (%a, %d. %b %Y) (von %s:%ld) - Das Zertifikat hat einen unbekannten Fehler. - Das Zertifikat ist abgelaufen. - Der Hostname des Zertifikats stimmt nicht überein. - Das Zertifikat ist nicht von einer vertrauenswürdigen Instanz ausgestellt Überprüfen Sie den Fingerabdruck, um das Zertifikat zu validieren! - Das Zertifikat ist noch nicht gültig. PAR erledigt. ohne Ausgabe. mit Ausgabe: | %d Zeile | %d Zeilen»%s«: unbekannter Befehl. %a %e. %b %H:%M:%S %Y%d. %b %Y%d. %b %H:%M%s (Revision %ld)%s (Arbeitskopie)%s wird durch Aktion %s behindert (Exit-Code %d)Aktion »%s« schlug fehl (Exit-Code %d)%s von »%s«%s von »%s«: %d %s (%s://%s)%s, Version %s übersetzt %s, %s %s: (Keine gültige URL) %s: (Keine versionierte Ressource) %sEigenschaftsänderungen: %s%s%swarnung: %s »%s« ist nicht das selbe Projektarchiv wie »%s«»%s« existiert bereits»%s« existiert bereits und ist im Weg»%s« existiert bereits und ist kein Verzeichnis»%s« enthält eine ungültige Dateisystemformat-Option »%s«»%s« scheint keine URL zu sein»%s« scheint kein Pfad einer Arbeitskopie zu sein»%s« definiert »%s()« nicht»%s« ist nicht vorhanden»%s« existiert nicht in Revision %ld»%s« hat keine zugehörige URL»%s« endet mit einem reservierten Namen»%s« existiert und ist nicht leer»%s« existiert und ist kein Verzeichnis»%s« hat einen nicht erkannten Knotentyp»%s« hat lokale Änderungen»%s« has Sperrmarke, aber keinen Sperreigner»%s« hat keine URL»%s« hat keine Informationen über seine VorgängerAktion »%s« schlug fehl (wurde nicht sauber beendet: apr_exit_why_e war %d, Exit-Code war %d). »%s«-Aktion war erfolgreich, aber die Fehlerausgabe konnte nicht gelesen werden»%s« in Revision %ld hat keinen Bezug zur Arbeitskopie»%s« ist eine URL obwohl es ein Pfad sein sollte »%s« ist eine URL, aber URLs können nicht übertragen werden»%s« ist eine URL, sollte vermutlich ein Pfad sein»%s« ist ein Vrzeichnis and kann deswegen nicht Element einer Änderungsliste sein»%s« ist ein reservierter Name und kann nicht importiert werden »%s« ist ein Unterverzeichnis eines existierenden Projektarchivs mit der Wurzel-URL »%s«»%s« ist eine AK-Eigenschaft und damit den Clients nicht zugänglich»%s« ist bereits eine Arbeitskopie für eine andere URL»%s« befindet sich bereits unter Versionskontrolle»%s« ist eine URL, obwohl es ein Pfad sein sollte»%s« ist der Ressource, die sich unter Versionskontrolle befindet, im Weg»%s« ist als abwesend markiert, es kann daher nicht für die Übertragung eingeplant werden»%s« ist weder ein Datei- noch ein Verzeichnisname»%s« ist keine URL»%s« ist kein Verzeichnis»%s« ist kein Verzeichnis im Dateisystem »%s«»%s« ist keine Datei»%s« ist im Dateisystem »%s« keine Datei»%s« ist in Revision %ld keine Datei»%s« ist weder eine Datei noch ein Verzeichnis»%s« ist kein gültiger Wert für --accept»%s« ist kein gültiger Wert für --show-revs»%s« ist kein gültiger EOL Wert»%s« ist kein gültiger Subversion-Eigenschaftsname»%s« ist kein gültiger Verwaltungsverzeichnisname»%s« ist keine gültige Tiefe; versuchen Sie »empty«, »files«, »immediates« oder »infinity«»%s« ist keine gültige Tiefe; versuchen Sie »exclude«, »empty«, »files«, »immediates« oder »infinity«»%s« ist kein gültiger Revisionsbereich»%s« ist keine Arbeitskopie»%s« ist kein Verzeichnis einer Arbeitskopie»%s« ist nicht gesperrt»%s« ist im Projektarchiv nicht gesperrt»%s« ist in dieser Arbeitskopie nicht gesperrt»%s« ist nicht die Basis des Projektarchivs»%s« ist nicht unter Versionskontrolle»%s« ist weder unter Versionskontrolle noch Teil einer Übertragung, dennoch ist sein Kind »%s« Teil einer Übertragung»%s« ist veraltet»%s« ist zum Hinzufügen innerhalb einer nicht versionierten Struktur vorgesehen»%s« ist zum Hinzufügen vorgesehen, fehlt aber»%s« ist nicht im selben Projektarchiv wie »%s«»%s« gesperrt durch »%s«. »%s« muss aus dem selben Projektarchiv wie »%s« stammen»%s« nicht gefunden»%s« nicht im Dateisystem gefunden»%s« nicht versioniert und nicht exportiert »%s« Pfad nicht gefunden»%s« verweist auf ein Verzeichnis»%s« hat %d zurückgegebenUmplatzieren von »%s« nach »%s« ist nicht möglich»%s« freigegeben. »%s« wurde im Projektarchiv in Revision %ld nicht gefunden»%s« existierte nicht für die Baseline-Ressource»%s« existierte nicht für die Ressource»%s@%ld« muss eine Vorgängerbeziehung zu »%s@%ld« habenOption »--new« ist nur in Verbindung mit der Option »--old« zulässigOption »--xml« ist nur in Verbindung mit der Option »--summarize« zulässig»DAV:baseline-collection« ist nicht in der Baseline-Ressource enthalten»get-deleted-rev« REPORT nicht implementiert»get-deleted-rev« nicht implementiert»get-file-revs«-REPORT nicht implementiert»get-file-revs« nicht implementiert»get-locations-segments«-REPORT nicht implementiert»get-location-segments« nicht implementiert»get-locations« REPORT nicht implementiert»get-locations« nicht implementiertOption »incremental« ist nur im XML-Modus gültig»stat« nicht implementiertOption »verbose« ist im XML-Modus ungültigOption »with-all-revprops« ist nur im XML-Modus gültigOption »with-no-revprops« ist nur im XML-Modus gültigOption »with-revprop« ist nur im XML-Modus gültig(Binärdateien sind unterschiedlich) Ve(r)werfen oder (t)emporär akzeptieren? Ve(r)werfen, (t)emporär akzeptieren oder (p)ermanent akzeptieren? (ungültiges Datum)(lokal)(kein Autor)(kein Datum) (s) alle Optionen anzeigen: * Revision %ld ausgegeben. * Revision %ld verifiziert. , (mc) eigene konfliktbehaftete Datei, (tc) fremde konfliktbehaftete Datei, (mf) volle eigene Datei, (tf) volle fremde Datei, (df) voller Diff, (e) editieren, (r) aufgelöst-- Zusammenführen (aus fremden Projektarchiv) von r%ld in »%s«: -- Zusammenführen (aus fremden Projektarchiv) von r%ld bis r%ld in »%s«: -- Zusammenführen der Unterschiede zwischen fremden Projektarchiv-URLs in »%s«: -- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in »%s«: -- Zusammenführen von r%ld in »%s«: -- Zusammenführen von r%ld bis r%ld in »%s«: -- Rückwärtiges Zusammenführen (aus fremden Projektarchiv) von r%ld in »%s«: -- Rückwärtiges Zusammenführen (aus fremden Projektarchiv) von r%ld bis r%ld in »%s«: -- Rückwärtiges Zusammenführen von r%ld in »%s«: -- Rückwärtiges Zusammenführen von r%ld bis r%ld in »%s«: ----------------------------------------------------------------------- ACHTUNG! Ihre Passphrase für das Klient-Zertifikat: %s kann auf der Platte nur unverschlüsselt gespeichert werden! Es wird empfohlen, falls möglich Ihr System so zu konfigurieren, dass Subversion Passphrasen verschlüsselt speichern kann. Siehe die Dokumentation für Details. Sie können ein weiteres Anzeigen dieser Warnung verhindern, indem Sie den Wert der Option »store-ssl-client-cert-pp-plaintext« in »%s« entweder auf »ja« oder »nein« setzen. ----------------------------------------------------------------------- ----------------------------------------------------------------------- ACHTUNG! Ihr Password für den Anmeldungstext (realm) %s kann auf der Platte nur unverschlüsselt gespeichert werden! Es wird empfohlen, falls möglich Ihr System so zu konfigurieren, dass Subversion Passwörter verschlüsselt speichern kann. Siehe die Dokumentation für Details. Sie können ein weiteres Anzeigen dieser Warnung verhindern, indem Sie den Wert der Option »store-plaintext-passwords« in »%s« entweder auf »ja« oder »nein« setzen. ----------------------------------------------------------------------- -- Diese und die folgenden Zeilen werden ignoriert ----accept=%s ist mit --non-interactive nicht kompatibel--auto-props und --no-auto-props schließen sich gegenseitig aus--depth und --set-depth schließen sich gegenseitig aus--depth kann nicht mit --reintegrate verwendet werdenOption --encoding ist nur für textbasierte von Subversion kontrollierte Eigenschaften angebbar--force kann nicht mit --reintegrate verwendet werden--reintegrate kann nicht mit --ignore-ancestry verwendet werden--reintegrate kann nicht mit --ignore-ancestry oder --record-only verwendet werden--reintegrate kann nicht mit --record-only verwendet werden--relocate und --depth schließen sich gegenseitig aus--trust-server-cert erfordert --non-interactive--verbose kann nicht mit --revprop oder --strict oder --xml verwendet werden--with-all-revprops und --with-no-revprops schließen sich gegenseitig aus--with-revprop und --with-no-revprops schließen sich gegenseitig aus-c und -r schließen sich gegenseitig aus-r und -c können nicht mit --reintegrate verwendet werden.merge-links.r%ld.merge-rechts.r%ld.working; vervollständigen Sie diese mit »svn update«.<<< Neue Transaktion basierend auf Originalrevision %ld gestartet <<<<<<< EIGENE (Auswahl mit »mc«) fehlt die Herkunft>>>>>>> FREMDE (Auswahl mit »tc«)Eine MERGE-Antwort für »%s« ist kein Kind des Ziels (»%s«)Ein Prüfsummenfehler ist aufgetretenEin Konflikt in der Arbeitskopie behindert die aktuelle OperationEin externer Dateiverweis kann kein existierendes versioniertes Objekt überschreibenEine Logmeldung wurde angegeben wo keine nötig istFür diese Operation wird ein Pfad unter Versionskontrolle benötigtEin Problem ist aufgetreten, für Details siehe andere FehlermeldungenEs kann kein Report erzeugt werden, da keine Daten geliefert wurdenEine Aktion im Projektarchiv schlug fehlEine Darstellung ist zwischen Lesezugriffen verschwunden oder hat sich verändertBeim Zusammenführen von Arbeitskopien wird eine explizite Revision benötigtPAR (manche Befehle akzeptieren auch einen Wertebereich PAR1:PAR2) Ein Revisionsparameter kann sein: NUMMER Revisionsnummer »{«DATUM»}« Revision zum Startdatum »HEAD« neueste Revision im Projektarchiv »BASE« Basisrevision der Arbeitskopie »COMMITTED« letzte übertragene Revision zu oder vor BASE »PREV« letzte Revision vor COMMITTEDÜbertragung abgebrochen: »%s« bleibt im KonfliktÜbertragung abgebrochen: »%s« verursacht weiterhin einen BaumkonfliktGemischte Zugriffsverfahren werden noch nicht unterstützt (»%s« and »%s«)Aktivität nicht gefundenHinzugefügtHinzugefügt: %s Hinzugefügt: %s%sHinzufügen %s Hinzuf. (bin) %s Hinzufügen eines Verzeichnisses schlug fehl: %s auf %s (%d)Alle Anmeldemöglichkeiten erschöpftAlle nicht-relativen Ziele müssen die selbe Wurzel-URL habenApache hat eine fehlerhafte URI erhaltenApache besitzt keinen Pfad zu einem SVN DateisystemWendet die Unterschiede zwischen zwei Quellen auf einen Arbeitskopiepfad an. Aufruf: 1. merge QuellURL1[@N] QuellURL2[@M] [AKPfad] 2. merge QuellAKPfad1@N QuellAKPfad2@M [AKPfad] 3. merge [-c M[,N...] | -r N:M ...] QUELLE[@REV] [AKPfad] 1. In der ersten Form werden die Quell-URLs in den Revisionen N und M angegeben. Dies sind die beiden Quellen, die verglichen werden. Die Revisionen entsprechen HEAD, wenn keine Nummern angegeben wurden. 2. In der zweiten Form werden die den Arbeitskopiepfaden entsprechenden URLs miteinander verglichen. Die Revisionen müssen angegeben werden. 3. In der dritten Form kann QUELLE eine URL oder ein Arbeitskopiepfad (in diesem Fall wird die entsprechende URL verwendet) sein. QUELLE (in Revision REV) wird verglichen, wie es zwischen den Revisionen N und M für jeden angegebenen Revisionsbereich existierte. Ohne Angabe von REV wird HEAD verwendet. Die Option »-c M« ist äquivalent zu »-r :M« und »-c -M« kehrt dies um: »-r M:«. Falls keine Revisionsbereiche angegeben wurden, wird 0:REV verwendet. Mehrere Angaben von »-c« und/oder »-r« sind möglich und das Mischen von vor- und rückwärtigen Bereichen ist erlaubt. AKPfad ist der Arbeitskopiepfad, in den die Änderungen geschrieben werden. Die Vorgabe für AKPfad ist ».«, es sei denn, die Quellen haben einen identischen Basisnamen, der eine Datei unterhalb von ».« beschreibt. In diesem Fall werden die Änderungen auf die gefundene Datei angewandt. ACHTUNG: Subversion wird nur Metadaten zum Verfolgen der Zusammenführung aufzeichnen, falls die zwei Quellen sich in der selben Historienabfolge befinden - falls die erste Quelle ein Vorgänger der zweiten ist oder umgekehrt. Dies ist garantiert der Fall, falls die dritte Form verwendet wird. Die Option --ignore-ancestry überschreibt dies und zwingt Subversion dazu, die Quellen als nicht zueinander bezogen zu betrachten und die Zusammenführung nicht aufzuzeichnen. Text-Delta Anwendung bereits aktivText-Delta Anwendung nicht aktivSind alle Ziele Teil derselben Arbeitskopie?Parameter für --limit muss positiv seinAssert-Anweisung schlug fehlVerknüpft Änderungsliste CLNAME (oder löst diese Verknüpfung) mit den angegebenen Dateien. Aufruf: 1. changelist CLNAME ZIEL... 2. changelist --remove ZIEL... Mindestens eine Eigenschaftsänderung schlug fehl; Projektarchiv nicht geändertZumindest eine Revision (r%ld) aus »%s« wurde nicht zusammengeführtWenn eine Basisrevision angegeben wurde, muss zumindest eine Revision auf dem Server seinRevision %ld. Es wurde versucht, einen Baumkonflikt hinzuzufügen, den es bereits gibtVersuch, einen nicht-veränderlichen Knoten des Dateisystems zu ändernVersuch, Deltas von »%s« gegen sich selber zu erstellenDer Versuch, die Eigenschaft »%s« abzufragen, führte zu »%s«Versuch, leeren Abwicklungsstapel abzurufenVersuch, Basisverzeichnis des Dateisystems zu entfernen oder neu zu erstellenVersuch, die Eigenschaft »%s« der Arbeitskopie während einer Nicht-Übertragungs-Operation auf »%s« zu setzenVersuch, mit nicht leerem Abwicklungsstapel zu entsperrenAusführen einer Operation in einem Verwaltungsverzeichnis versuchtVersuchte, die Informationen zur Zusammenführungsverfolgung eines nicht-veränderlichen Knotens zu ändernVersuchte, die Anzahl der Zusammenführungsinformationen eines nicht-veränderlichen Knoten zu ändernVersuchte, einen nicht-veränderlichen Knoten zu entfernenVersuchte, Unterknoten eines nicht-veränderlichen Knotens zu klonenVersuchte, Knoten mit illegalem Namen »%s« anzulegenVersuchte, Eintrag in einem *nicht* Verzeichnisknoten anzulegenVersuchte, Eintrag anzulegen, der bereits existiertVersuchte, einen Knoten mit illegalem Namen »%s« zu löschenVersuchte, Eintrag »%s« aus einem *nicht* Verzeichnisknoten zu löschenVersuchte, Eintrag »%s« aus einem nicht-veränderlichen Verzeichnisknoten zu löschenVersuchte, die Prüfsumme eines *nicht* Dateiknotens zu holenVersuchte, die Länge eines *nicht* Dateiknotens zu holenVersuchte, den Textinhalt eines *nicht* Dateiknotens zu holenVersuch, ein bereits gesperrtes Verzeichnis erneut zu sperrenVersuchte, Unterknoten mit illegalem Namen »%s« zu klonenVersuchte, einen Knoten mit illegalem Namen »%s« zu öffnenVersuchte, nicht existierenden Unterknoten »%s« zu öffnenVersuchte, Eintrag in einem nicht-veränderlichen Knoten zu setzenVersuchte, Eintrag in einem *nicht* Verzeichnisknoten zu setzenVersuchte, den Textinhalt eines *nicht* Dateiknotens zu setzenVersuchte, den Textinhalt eines nicht-veränderlichen Knotens zu setzenVersuch, in eine Nicht-Transaktion zu schreibenVersuch, in eine nur lesbare SQLite-Datenbank zu schreibenVersuch, eine beschränkte Operation für veränderte Ressource auszuführenVersuch, mehrfach zu einer URL zu übertragenVersuchte, nicht existierende Eigenschaft »%s« zu löschenAnmeldefehler von Server: %sAuthentifizierung schlug fehlAnmeldebereich: %s Autorenname darf keinen Zeilenumbruch enthaltenAutorisierung schlug fehlFehlerhafte ID im ZwischenspeicherUngültige URL an die ZM-Schicht übergebenFalsche Parameter »kopieren von« erhaltenFalsche Datenbankversion: Übersetzt mit %d.%d.%d, läuft mit %d.%d.%dFalsche Datenbankversion: %d.%d.%d, sollte mindestens %d.%d.%d seinFehlerhaftes Zusammenführen: Vorgänger, Quelle und Ziel nicht im gleichen DateisystemFehlerhaftes Zusammenführen: Ziel »%s« hat die gleiche ID »%s« wie der Vorgänger.Falscher Elternpool an svn_make_pool() übergebenFehlerhafter EigenschaftsnameUngültiger Name für Eigenschaft: »%s«Prüfsummenfehler für »%s«: Erwartet: %s Tatsächlich: %s »Baseline« nicht korrektDeadlock-Fehler der Berkeley DatenbankBerkeley-DB-FehlerBerkeley-DB-Fehler für Dateisystem »%s« während %s: Berkeley-DB-Fehler für Dateisystem »%s« beim Schließen der Umgebung: Berkeley-DB-Fehler für Dateisystem »%s« beim Erzeugen der Umgebung: Berkeley-DB-Fehler für Dateisystem »%s« beim Öffnen der Umgebung: Fehlerhafte ID »%s« im ZwischenspeicherUngültige URLUngültige UUIDUngültiges DatumUngültiger DateinameUngültiger Mime-TypFalsche Revisionsinformation angegebenUngültiger RevisionsreportFalsche ServerangabeAktualisiert die Arbeitskopie mit Änderungen aus dem Projektarchiv. Aufruf: update [PFAD...] Ist keine Revision angegeben, wird die Arbeitskopie auf den aktuellen Stand der HEAD-Revision gebracht. Ansonsten wird die Arbeitskopie mit der durch -r angegebenen Revision synchronisiert. Für jedes aktualisierte Objekt wird eine Zeile mit einem Buchstaben für die durchgeführte Aktion ausgegeben. Diese haben die folgenden Bedeutungen A Added - Hinzugefügt D Deleted - Gelöscht U Updated - Aktualisiert C Conflict - Konflikt G Merged - Zusammengeführt E Existed - Existierend Ein Buchstabe in der ersten Spalte symbolisiert eine Aktualisierung der Datei, während Aktualisierungen der Dateieigenschaften in der zweiten Spalte angezeigt werden. Ein »B« in der dritten Spalte zeigt an, dass die Sperre für die Datei aufgebrochen oder gestohlen wurde. Falls --force verwendet wird, werden nichtversionierte behindernde Pfade in der Arbeitskopie nicht automatisch einen Fehlschlag verursachen, wenn die Aktualisierung versucht, den selben Pfad hinzufügen. Ist der behindernde Pfad vom selben Typ (Datei oder Verzeichnis) wie der entsprechende Pfad im Projektarchiv, wird es versioniert, aber der Inhalt verbleibt wie er ist in der Arbeitskopie. Das bedeutet, dass nichtversionierte Kinder eines behindernden Verzeichnisses ebenso behindert werden und versioniert werden können. Für Dateien werden alle inhaltlichen Unterschiede zwischen der Behinderung und dem Projektarchiv wie lokale Änderungen in der Arbeitskopie interpretiert. Alle Eigenschaften des Projektarchivs werden auf den behindernden Pfad angewandt. Behindernde Pfade werden in der ersten Spalte mit »E« angezeigt. Verwenden Sie die Option --set-depth, um eine neue Arbeitskopietiefe für die Ziele dieser Operation zu setzen. Zurzeit kann die Tiefe eines Arbeitskopieverzeichnisses nur erhöht werden (tiefer ineinander geschachtelt); eine Verzeichnistiefe kann nicht reduziert werden. Kann nur eine Arbeitskopie mit einer eingeschränkten Tiefe beschneidenKann nur Verzeichnisse beschneidenKann Clientverbindung nicht annehmenKann »%s« nicht zu einem Elternverzeichnis hinzufügen, das selbst zum Löschen vorgesehen istKann »%s« in gelöschtem Verzeichnis nicht hinzufügen; versuchen Sie zuerst, das Löschen des Elternverzeichnisses rückgängig zu machenKann FS Mutex nicht anlegenKann »%s« nicht an »%s« anhängenKann Serververbindung nicht bindenKann die das angeforderte Datum nicht berechnenKann die Größe der Anfrage nicht berechnenKann die Zugriffsrechte der Datei »%s« nicht ändernKann Arbeitsverzeichnis nicht nach »%s« wechselnKann Verzeichnis »%s« nicht prüfenKann Pfad »%s« nicht prüfenKann »chmod '%s'« nicht durchführenKann Verzeichnis »%s« nicht schließenKann Datei »%s« nicht schließenKann Prototyp-Revisionssperrdatei für Transaktion »%s« nicht schließenKann Datenstrom nicht schließenKann nicht mit Host »%s« verbindenKann Modulpfad nicht von UTF-8 in UCS-2 konvertieren: »%s«Kann Zeichenkette nicht von »%s« nach »%s« konvertieren:Kann Zeichenkette nicht von »%s« in die eigene Codierung konvertieren:Kann Zeichenkette nicht von der eigenen Codierung nach »%s« konvertieren:Kann Zeichenkette nicht in UCS-2 konvertieren: »%s«Kann »%s« nicht nach »%s« kopierenKann DSO-Mutex nicht erzeugenKann FSFS-txn-list-Mutex nicht anlegenKann FSFS-txn-current-Mutex nicht anlegenKann FSFS Schreibschutz-Mutex nicht anlegenKann keinen Zeichenkonverter von »%s« nach »%s« erzeugenKann keinen Zeichenkonverter von »%s« in die eigene Kodierung erzeugenKann keinen Zeichenkonverter von der eigenen Codierung nach »%s« erzeugenKann keinen Eintrag für einen verbotenen Namen erzeugenKann einen Eintrag mit einem reservierten Namen nicht erzeugen, während versucht wird, »%s« hinzuzufügenKann Zwischenspeicher-Mutex nicht anlegenKann Verzeichnis »%s« nicht anlegenKann leere Standardausgabe für Aktion »%s« nicht anlegenKann »Pipe« für Aktion »%s« nicht anlegenKann Attribute von Prozess »%s« nicht erzeugenKann Serververbindung nicht erzeugenKann symbolischen Link »%s« nicht anlegenKann Thread nicht erzeugenKann »Thread« Attribut nicht erzeugenKann Tunnel nicht erzeugenKann MIME Typ der nicht-Datei »%s« nicht ermittelnKann die Zeichencodierung des Pfades nicht ermittelnKann Zeitangabe nicht expandierenKann gemeinsame FSFS-Daten nicht holenKann temporäres Verzeichnis nicht findenKann keinen Pfad einer Arbeitskopie findenKann keinen Eintrag findenKann Eintrag des Elternverzeichnisses während des Hinzufügens von »%s« nicht findenKann Datei »%s« nicht leerenKann Datei nicht auf Festplatte leerenKann Datenstrom nicht leerenKann Adressinformation nicht ermittelnKann keine Attributinformationen aus Datei »%s« lesenKann keine Attributinformationen aus Datenstrom lesenKann die Standardberechtigungen für Datei in »%s« nicht holen (Dateistatus)Kann keine Einträge aus einem nicht-Verzeichnis lesenKann keinen exklusiven Zugriff auf Datei »%s« erlangenKann keinen Dateinamen holenKann die Berechtigungen für Datei in »%s« nicht holen (Dateistatus)Kann den Hostnamen nicht erhaltenKann den lokalen Hostnamen nicht bekommenKann Namen der Moduldatei nicht ermittelnKein Passwort erhaltenKann keine gemeinsame Sperre für Datei »%s« erhaltenKann Socket-Timeout nicht erhaltenKann Benutzername oder Passwort nicht erhaltenKann Arbeitsverzeichnis nicht ermittelnKann DSO-Mutex nicht greifenKann FS Mutex nicht greifenKann FSFS-Mutex für »%s« nicht greifenKann FSFS-txn-list-Mutex nicht greifenKann Verzeichnis »%s« nicht versteckenKann Zusammenführungsinformationszähler für Datei-Knotenrevision %%s nicht auf %%%s (> 1) erhöhenKann Zusammenführungsinformationszähler für Knotenrevision %%s nicht auf negativen Wert %%%s erhöhenKann keinen »memcached«-Zwischenspeicher durchlaufenKann Zwischenspeicher-Mutex nicht sperrenKann das Semaphor zur Zeichensatzkonvertierung nicht sperrenKann Verzeichnis »%s« nicht anlegenKann Pipe-Lese-Handle für Aktion »%s« nicht nicht-erbbar machenKann Pipe-Schreib-Handle für Aktion »%s« nicht nicht-erbbar machenKann das aktuelle Datum nicht manipulierenKann »%s« nicht nach »%s« verschiebenKann Quelle nicht nach Ziel verschiebenKann »%s« nicht öffnenKann Verzeichnis »%s« nicht öffnenKann Datei »%s« nicht öffnenKann Datei in »%s« nicht öffnenKann Standardfehlerausgabe nicht öffnenKann Standardeingabe nicht öffnenKann Standardeingabe nicht öffnenKann Standardausgabe nicht öffnenKann »lock/entries« Hashdatei »%s« nicht zerlegenKann Inhalt des Verweises nicht lesenKann Verzeichnis nicht lesenKann Verzeichnis »%s« nicht lesenKann Verzeichniseintrag in »%s« nicht lesenKann Datei »%s« nicht lesenDie erste Zeile der Formatdatei »%s« kann nicht gelesen werdenKann nicht aus Verbindung lesenKann Längenzeile nicht aus Datei »%s« lesenKann Längenzeile nicht aus Datenstrom lesenKann nicht aus Standardeingabe lesenKann nicht aus Datenstrom lesenKann Fehlermeldung von APR nicht umkodierenKann »%s« nicht löschenKann Verzeichnis »%s« nicht entfernenKann Datei »%s« nicht löschenKann »%s« in gelöschtem Verzeichnis nicht ersetzen; versuchen Sie zuerst, das Löschen des Elternverzeichnisses rückgängig zu machenKann »%s« nicht durch einen Knoten eines anderen Typs ersetzen; Übertragen Sie die Löschung, aktualisieren Sie das Elternverzeichnis und fügen Sie erst dann »%s« hinzuKann nicht in das Arbeitsverzeichnis zurückwechselnKann Verzeichnis »%s« nicht zurückspulenKann Zugriffszeit von »%s« nicht setzenKann nicht in den gelösten Status wechselnKann den Schreibschutz der Datei »%s« nicht setzenKann den Schreibschutz der Datei »%s« nicht aufhebenKann Berechtigungen auf »%s« nicht setzenKann Positionszeiger in Datei »%s« nicht setzenKann Positionszeiger in Datenstrom nicht setzenKann Fehlerausgabe des Kindprozesses »%s« nicht setzenKann Datei für die Fehlerbehandlung des Kindprozesses »%s« nicht setzenKann Eingabe des Kindprozesses »%s« nicht setzenKann Ausgabe des Kindprozesses »%s« nicht setzenKann Kommandotyp von Prozess »%s« nicht setzen Kann Verzeichnis von Prozess »%s« nicht setzenKann die Fehlerbehandlung des Prozesses »%s« nicht setzenKann keine Eigenschaften für *nicht-veränderliche* Knotenrevision %s setzen.Kann Textinhalt im Verzeichnis nicht erzeugen-c kann nicht mit --old verwendet werdenZeile kann nicht in Komponenten zerlegt werden: »%s«Kann Prozess »%s« nicht startenKann Status von »%s« nicht ermittelnKann gemeinsame FSFS-Daten nicht speichernKann Anweisung »%s« nicht zerlegenKann Datei »%s« nicht abschneidenKann Datenstrom nicht abschneidenKann DSO-Mutex nicht loslassenKann FS Mutex nicht loslassenKann FSFS-Mutex für »%s« nicht loslassenKann FSFS-txn-list-Mutex nicht loslassenKann Zwischenspeicher-Mutex nicht entsperrenKann das Semaphor zur Zeichensatzkonvertierung nicht freigebenNicht gesperrte Transaktion »%s« kann nicht freigeben werdenKann Prototyp-Revisionssperrdatei für Transaktion »%s« nicht entsperrenKann unbekannte Transaktion »%s« nicht freigebenKann nicht nach »%s« schreibenKann nicht in Verbindung schreibenKann nicht in Datei »%s« schreibenKann nicht in Datenstrom schreibenKann Eigenschaft »%s« nicht akzeptieren, da sie nicht in UTF-8 kodiert istKann nicht-»LF« (LF = Unix-artige) Zeilenumbrüche in Eigenschaft »%s« nicht akzeptierenKann einen Pfad nicht sowohl ausschließen als auch umstellenKann Binärdatei »%s« nicht annotierenKann Knotentyp nicht ändernKann »%s« und »%s« nicht übertragen, da beide auf dieselbe URL verweisenKann Dateiinhalte nicht zwischen verschiedenen Dateisystemen vergleichenKann Eigenschaftswert nicht zwischen verschiedenen Dateisystemen vergleichenKann nicht zwischen zwei verschiedenen Dateisystemen (»%s« und »%s«) kopierenKann »%s« nicht kopieren oder verschieben, da es sich noch nicht im Projektarchiv befindet, versuchen Sie es zuerst zu übertragenKann Pfad »%s« nicht in sein eigenes Kind »%s« kopierenKann keine Revisionseigenschaften für eine Revision (%ld) kopieren, die noch nicht synchronisiert wurdeKann nach »%s« kopieren, da es zum Löschen vorgesehen istKann »%s« nicht kopieren, da es nicht aus dem Projektarchiv »%s« stammt sondern aus »%s«Kann »%s« nicht beschneiden: Es ist ein umgestellter PfadKann »%s« nicht beschneiden: Es soll vom Projektarchiv entfernt werden. Versuchen Sie stattdessen es zu übertragenKann externen Dateiverweis nicht löschenDie Erstellung von Deltas für Revisionen vor r%ld ist nicht möglichDie Revision der Arbeitskopie kann nicht bestimmt werdenKann nicht anzeigen: Dateityp ist als binär angegeben.%sKann aktuelles Verzeichnis nicht exkludierenKann Wurzelverzeichnis nicht exkludierenKann keine URL für »%s« findenKann kein Projektarchiv mit Inhalt initialisierenEin externer Dateiverweis von »%s« kann nicht in die Arbeitskopie eines anderen Projektarchivs mit der Wurzel »%s« eingefügt werdenKann den Editor für Logmeldungen nur im interaktiven Modus aufrufenQuellen aus dem Projektarchiv und einer Arbeitskopie können nicht gemischt werdenKann die Transaktion namens »%s« in Dateisystem »%s« nicht modifizierenKann URL »%s« nicht auf sich selbst verschiebenKann externen Dateiverweis nicht verschiebenKann »%s« nicht auf sich selbst verschiebenExterner Dateiverweis bei »%s« kann nicht verschoben werden; bitte bearbeiten Sie die für die Erstellung verantwortliche Eigenschaft svn:externalsKann Anmeldungsmechanismus nicht aushandelnDas Löschen eines Verzeichnisses mit Untereinträgen kann nur rekursiv übertragen werdenKann nicht zurück in eine Arbeitskopie integrieren, die keine vollständig unendliche Tiefe hatKann nicht zurück in eine Arbeitskopie integrieren, die lokale Änderungen hatKann nicht zurück in eine Arbeitskopie mit umgestelltem Unterbaum integrierenKann nicht zurück in eine Arbeitskopie mit verschiedenen Revisionen integrieren, versuchen Sie erst zu aktualisierenExterner Dateiverweis bei »%s« kann nicht entfernt werden; bitte bearbeiten oder löschen Sie die für die Erstellung verantwortliche Eigenschaft svn:externalsKann ein Verzeichnis nicht innerhalb sich selbst ersetzenKann keinen Bereich aus der zukünftigen Geschichte des Pfades rückwärts zusammenführen; versuchen Sie zuerst zu aktualisierenKann »%s« nicht zurücksetzen: nicht unterstützter EintragsknotentypKann »%s« nicht zurücksetzen: nicht unterstützter Knotentyp in ArbeitskopieKann Hinzufügen des aktuellen Verzeichnisses nicht zurücknehmen; bitte versuchen Sie es aus dem Elternverzeichnis erneutNicht versioniertes Objekt »%s« kann nicht rückgängig gemacht werdenKann »%s« nicht für ein Verzeichnis setzen (»%s«)Kann »%s« nicht für eine Datei setzen (»%s«)Die Angabe eines Revisionsbereichs mit zwei URLs ist nicht möglichZum Löschen der versionierten Eigenschaft »%s« darf keine Revision angegeben werdenBeim Bearbeiten der versionierten Eigenschaft »%s« darf keine Revision angegeben werdenBeim Setzen der versionierten Eigenschaft »%s« darf keine Revision angegeben werdenAndere Revisionen (als HEAD) sind bei Verschiebeoperationen nicht zugelassenKann Pfad »%s« nicht freigeben, kein angemeldeter Benutzername verfügbarMan kann nicht --username oder --password mit einem von --source-username, --source-password, --sync-username oder --sync-password verwenden. Kann Sperre für Pfad »%s« nicht prüfen; keine entsprechende Sperrmarke verfügbarKann Sperre für Pfad »%s« nicht prüfen; keine Benutzername verfügbarKann »lock/entries« Hashdatei »%s« nicht schreibenKann Eigenschafts-Hashwert nicht nach »%s« schreibenKann nicht in die Prototyp-Revisionsdatei der Transaktion »%s« schreiben, da eine frühere Darstellung zurzeit von einem anderen Prozess geschrieben wirdKann nicht in die Prototyp-Revisionsdatei der Transaktion »%s« schreiben, da eine frühere Darstellung zurzeit von diesem Prozess geschrieben wirdEigenschaftseintrag ist kein WortAbbruchsignal empfangenEinstellen der Benutzung dieser APIZertifikats-Informationen: - Hostname: %s - Gültig: von %s bis %s - Aussteller: %s - Fingerabdruck: %s Geänderte Pfade: Eintrag für geänderte Pfade ist keine ListeÄnderungsliste passt nichtNamen von Änderungslisten dürfen nicht leer seinÄnderungsliste: %s Checkt eine Arbeitskopie aus einem Projektarchiv aus. Aufruf: checkout URL[@REV]... [PFAD] Falls angegeben, legt REV fest, in welcher Revision die URL zuerst nachgeschlagen wird. Ohne Angabe von PFAD wird der Basisname der URL als Ziel verwendet. Sind mehrere URLs angegeben, wird jede in ein Unterverzeichnis von PFAD ausgecheckt, dessen Name der Basisname der URL ist. Bei Angabe von --force lassen nicht versionierte, behindernde Objekte in der Arbeitskopie den Vorgang nicht automatisch fehlschlagen. Falls der behindernde Pfad vom gleichen Typ (Datei oder Verzeichnis) wie der entsprechende Pfad im Projektarchiv ist, wird er versioniert, behält aber seinen ursprünglichen Inhalt. Das bedeutet, dass nicht versionierte Unterverzeichnisse eines behindernden Verzeichnisses ebenfalls versioniert werden können. Bei Dateien werden alle Unterschiede im Inhalt wie lokale Modifikationen in der Arbeitskopie behandelt. Sämtliche Eigenschaften aus dem Projektarchiv werden auf den behindernden Pfad angewendet. Siehe auch »svn help update« für eine Liste möglicher Buchstaben, die die durchgeführte Aktion beschreiben. Externer Verweis ausgecheckt, Revision %ld. Ausgecheckt, Revision %ld. Auschecken abgeschlossen. Prüfsummenfehler für »%s«: Erwartet: %s Tatsächlich: %s Prüfsummenfehler für »%s«; erwartet: »%s«, tatsächlich: »%s«Prüfsummenfehler für »%s«; erwartet: »%s«, tatsächlich: »%s«Prüfsummenfehler für Volltextergebnis: (%s): Erwartet: %s Tatsächlich: %s Prüfsummenfehler ist Anzeichen für beschädigte Textbasis: »%s« Erwartet: %s Tatsächlich: %s Prüfsummenfehler, Datei »%s«: Erwartet: %s Tatsächlich: %s Prüfsummenfehler beim Lesen der Darstellung: Erwartet: %s Tatsächlich: %s Prüfsummenfehler, Datei »%s«: Erwartet: %s Tatsächlich: %s Prüfsummenfehler, Datei »%s«: Erwartet: %s Tatsächlich: %s Prüfsumme: %s Client Zertifikatsdatei: Client- und Serverversion stimmen nicht übereinDas Kommando »finish-replay« ist außerhalb von »replay«s ungültigKommentar (%i Zeile): %s Kommentar (%i Zeilen): %s Kommentar (%i Zeile): %s Kommentar (%i Zeilen): %s ÜbertragenÜberträgt eine nicht versionierte Datei oder einen Dateibaum in das Projektarchiv. Aufruf: import [PFAD] URL Überträgt rekursiv eine Kopie des PFADes zur URL. Ohne Angabe von PFAD wird ».« angenommen. Übergeordnete Verzeichnisse werden soweit erforderlich im Projektarchiv angelegt. Falls PFAD ein Verzeichnis ist, wird dessen Inhalt direkt unterhalb der URL hinzugefügt. Nichtversionierbare Elemente wie Gerätedateien und Pipes werden ignoriert, falls --force angegeben wird. Übertragung erzeugte Revision %ld, sollte aber %ld erzeugenÜbertragen schlug fehl (Details folgen):Übertragenes Objekt »%s« ist als Kopie markiert, hat aber eine ungültige RevisionÜbertragenes Objekt »%s« ist als Kopie markiert, besitzt aber keine Quell-URLÜbertragen erfolgreich, aber andere Fehler folgen:Übertragen erfolgreich, aber die »post-commit«-Aktion schlug fehlRevision %ld übertragen. Übertragung in einem Verzeichnis, das zum Hinzufügen vorgesehen istKompression der svndiff-Daten schlug fehlKonfigurationsfehler: Ungültiger logischer Wert »%s« für »%s«Konfigurationsfehler: Ungültiger logischer Wert »%s« für »[%s] %s«Konfigurationsfehler: Ungültige Ganzzahl »%s«Konfigurationsfehler: Ungültiger Wert »%s« für Option »%s«Konflikt: aktuelle Ausgangsdatei: %s Konflikt: vorherige Ausgangsdatei: %s Konflikt: vorherige Arbeitsdatei: %s Konfliktdatei mit Eigenschaften: %s Konflikt bei »%s«Konflikt-Aktion verletzte die API: keine zusammengeführte Datei wurde zurückgeliefertKonflikt-Aktion verletzte die API: keine zusammengeführte Datei wurde zurückgeliefert.Konflikt-Aktion verletzte die API: keine Ergebnisse wurden zurückgeliefertKonflikt-Aktion verletzte die API: keine Ergebnisse wurden zurückgeliefert.Konflikt in »%s« entdeckt. Beim Versuch, »%s« hinzuzufügen, wurde ein Konflikt entdeckt. Ein Objekt mit demselben Namen existiert bereits. Konflikt für Eigenschaft »%s« für »%s« entdeckt. Konfliktauflösung schlug fehlKopiert von Rev: %ld Kopiert von URL: %s Kopierte Eigenschaften für Revision %ld (%s* Eigenschaften übergangen). Eigenschaften für Revision %ld kopiert. Kopiert: %s (von Rev %ld, %s) Kopieren eines veränderlichen Baumes wird derzeit nicht unterstütztPrüfsummenfehler für Kopie von »%s«@%ld nach »%s« in der auf r%ld basierten Revision: Erwartet: %s Tatsächlich: %s Die Quell-URL »%s« hat eine andere Projektarchiv-Basis als »%s«Kopieren aus Transaktionen ist nicht erlaubt.Copyright (C) 2000-2009 CollabNet. Subversion ist Open-Source-Software, siehe http://subversion.tigris.org/ Dieses Produkt enthält Software, die von CollabNet (http://www.Collab.Net/) entwickelt wurde. DB beschädigt: Fehlerhafte VorgängeranzahlDB beschädigt: Erste Kopie ist nicht »0« in Dateisystem »%s«DB beschädigt: Erste Revision ist nicht »0« in Dateisystem »%s«DB beschädigt: Erste Transaktion ist nicht »0« in Dateisystem »%s«Aktuelle Datei beschädigtBeschädigter Eintrag in »copies« Tabelle für »%s« in Dateisystem »%s«Beschädigter Eintrag in »transactions« Tabelle für »%s« in Dateisystem »%s«Beschädigte Dateisystemrevision %ld in Dateisystem »%s«Beschädigte Sperre in »locks« Tabelle für »%s« in Dateisystem »%s«Beschädigte Sperrdatei für Pfad »%s« in Dateisystem »%s«Beschädigter Knoten-Id in KnotenrevisionBeim Lesen der Delta-Kette aus der Darstellung »%s« nach »%s« wurde eine Beschädigung entdecktKonnte oberstes Verzeichnis nicht erzeugenKonnte die Versionsressourcen-URL nicht bestimmen (wird für einen Import oder, falls sie in den lokalen, zwischengespeicherten Eigenschaften fehlt, benötigt)Konnte Zeilenende in Bereichslistenzeile in »%s« nicht findenKonnte »content-type« nicht aus der Antwort lesenKonnte die SASL-Bibliothek nicht initialisierenKonnte Rechnernamen »%s« nicht nachschlagenKonnte die Liste der SASL-Mechanismen nicht erhaltenKonnte Zusammenführungsinformationszeichenkette »%s« nicht einlesenKonnte Datei nicht sichernKonnte die URL der versionierten Ressource nicht speichernKonnte keinen externen Editor zur Eingabe der Logmeldung bestimmen. Setzten Sie entweder die $SVN_EDITOR Umgebungsvariable oder verwenden Sie die --message (-m) oder --file (-F) OptionenKonnte svndiff nicht in Temporärdatei schreibenKonnte den absoluten Pfad von »%s« nicht ermittelnKonnte Eigenschaften nicht zusammenführenKonnte Projektarchiv nicht findenKann den angemeldeten Benutzername nicht erhaltenKonnte Projektarchiv nicht öffnenKann Log-Datei nicht öffnenEine atomare Initialisierung konnte nicht durchgeführt werdenErzeugt ein neues Verzeichnis unter Versionskontrolle. Aufruf: 1. mkdir PFAD... 2. mkdir URL... Erzeugt Verzeichnisse unter Versionskontrolle. 1. Jedes durch den PFAD einer Arbeitskopie spezifizierte Verzeichnis wird lokal erzeugt und zum Hinzufügen bei der nächsten Übertragung eingeplant. 2. Jedes durch eine URL spezifizierte Verzeichnis wird mittels einer sofortigen Übertragung im Projektarchiv angelegt. In beiden Fällen müssen alle Zwischenverzeichnisse bereits existieren, es sei denn, die Option --parents wurde angegeben. Erzeugt eine nicht versionierte Kopie eines Dateibaumes. Aufruf: 1. export [-r REV] URL[@PEGREV] [PFAD] 2. export [-r REV] PFAD1[@PEGREV] [PFAD2] 1. Exportiert einen sauberen Verzeichnisbaum, der durch die URL spezifiziert ist, aus dem Projektarchiv nach PFAD. Ohne Angabe von REV wird HEAD exportiert, sonst REV. Ohne Angabe von PFAD wird der letzte Abschnitt der URL als lokaler Verzeichnisname verwendet. 2. Exportiert einen sauberen Verzeichnisbaum aus PFAD1 heraus in das Verzeichnis PFAD2. Ohne Angabe von REV wird WORKING exportiert, sonst REV. Ohne Angabe von PFAD2 wird der letzte Abschnitt von PFAD1 als lokaler Verzeichnisname verwendet. Ohne Angabe von REV werden alle lokalen Änderungen beibehalten. Objekte, die sich nicht unter Versionskontrolle befinden, werden in diesem Fall auch nicht kopiert. PEGREV gibt an, in welcher Revision das Ziel zuerst gesucht wird. Erstellt: %s Erzeuge Verzeichnis für DAV-SandkastenErzeuge Datei »authz«Erzeuge KonfigurationsverzeichnisErzeuge Datenbank-SperrdateiErzeuge Sperrdatei für DatenbanklogsLege Verzeichnis für Aktionen anErzeuge Verzeichnis für DatenbanksperrenErzeuge Datei »passwd«Erzeuge Aktion »post-commit«Erzeuge Aktion »post-revprop-change«Erzeuge Aktion »pre-commit«Erzeuge Aktion »pre-revprop-change«Erzeuge Aktion »start-commit«Erzeuge Datei »svnserve.conf«Beglaubigungsdaten nicht verfügbarBeglaubigungsdaten nicht gespeichertDAV-Anfrage schlug fehl; möglicherweise ist entweder die Aktion »pre-revprop-change« gescheitert oder sie fehltDaten können nicht sicher in XML eingebettet werdenDekompression der svndiff-Daten schlug fehlStandardeintrag hat keine RevisionsnummerStandardeintrag hat keine URLVorgabe: »-u«. Wenn Subversion ein externes Vergleichsprogramm aufruft, wird PAR nur an das Programm weitergereicht. Wenn Subversion aber sein internes Vergleichsprogramm benutzt oder Annotierungen anzeigt, kann PAR einen der folgenden Werte annehmen: -u (--unified): Gibt 3 Zeilen Standardkontext aus. -b (--ignore-space-change): Ignoriert Änderungen in der Anzahl von Leerzeichen. -w (--ignore-all-space): Ignoriert sämtliche Leerzeichen. --ignore-eol-style: Ignoriert Änderungen im EOL-StilVorgabe: »-u«. Wenn Subversion ein externes Vergleichsprogramm aufruft, wird PAR nur an das Programm weitergereicht. Wenn Subversion aber sein internes Vergleichsprogramm benutzt oder Annotierungen anzeigt, kann PAR einen der folgenden Werte annehmen: -u (--unified): Gibt 3 Zeilen Standardkontext aus. -b (--ignore-space-change): Ignoriert Änderungen in der Anzahl von Leerzeichen. -w (--ignore-all-space): Ignoriert sämtliche Leerzeichen. --ignore-eol-style: Ignoriert Änderungen im Zeilenendestil. -p (--show-c-function): Zeigt C-Funktionsname in Diff-Ausgabe.Löschen schlug fehl: Verzeichnis hat keinen Eintrag »%s«GelöschtGelöscht: %s Gelöscht: %s%sLösche %s Delta-Tiefe »exclude« wird nicht unterstütztDelta enthält nicht genügend neue DatenDelta füllt das Zielfenster nichtDelta Eigenschaftsblock erkannt - wird von svndumpfilter nicht unterstütztBilde Deltas für Revision %ld ...Tiefe »exclude« wird für Links nicht unterstütztTiefe: UNGÜLTIG Tiefe: leer Tiefe: Dateien Tiefe: immediates Beschreibt die Anwendung dieses Programms und seiner Unterbefehle. Aufruf: help [UNTERBEFEHL...] Beschreibt die Anwendung dieses Programms und seiner Unterbefehle. Aufruf: svndumpfilter help [UNTERBEFEHL...] Ziel »%s« existiert bereitsZiel »%s« ist kein VerzeichnisZiel-HEAD (%ld) ist nicht die zuletzt zusammengeführte Revision (%ld). Haben Sie in das Ziel ohne Verwendung von svnsync übertragen?Ziel-URLs sind kaputtZielverzeichnis existiert und kann nur mittels »--force« überschrieben werdenZielverzeichnis existiert; bitte löschen Sie das Verzeichnis oder verwenden Sie »--force« zum ÜberschreibenDem Zielverzeichnis von add-with-history fehlt eine URLZielprojektarchiv wurde noch nicht initialisiertDas Zielprojektarchiv synchronisiert bereits von »%s«Erwartete nicht, dass »%s« Basis einer Arbeitskopie istKeine Endemarke für Sperrantworten erhaltenKeine Endemarke für Entsperrantworten erhaltenDiff-Datenquellen wurden unerwarteterweise verändertInkonsistenzen in Diffversion in Darstellung »%s«Verzeichnis »%s« mit Administrationsdateien der Arbeitskopie fehltVerzeichnis »%s« hat keinen »THIS_DIR« EintragVerzeichnis »%s« hat keine URLVerzeichnis »%s« fehltVerzeichnis »%s« ist veraltetVerzeichnis »%s« ist veraltet; versuchen Sie zu aktualisierenVerzeichniseintrag beschädigtDas Verzeichnis muss leer sein, ist es aber nichtVerzeichniseintrag ist keine ListeDeaktiviertes Merkmal des ProjektarchivsZeigt Informationen über ein lokales oder auf dem Server befindliches Objekt an. Aufruf: info [ZIEL[@REV]...] Gibt Informationen über jedes ZIEL aus (Vorgabe: ».«). ZIEL kann entweder ein Pfad einer Arbeitskopie oder eine URL sein. Wenn angegeben, bestimmt REV, in welcher Revision zuerst nach dem Ziel gesucht wird. Anzeige relevanter Informationen zu Zusammenführungen. Aufruf: mergeinfo QUELLE[@REV] [ZIEL[@REV]] Zeigt Informationen zu Zusammenführungen (oder potentiellen Zusammenführungen) zwischen QUELLE und ZIEL (Standard: ».«) an. Falls die Option --show-revs nicht angegeben wurde, werden Revisionen, die von QUELLE nach ZIEL zusammengeführt wurden, angezeigt. Andernfalls wird die Art der Information angezeigt, die durch die Option --show-revs spezifiziert wurde. Zeigt die Unterschiede zwischen zwei Revisionen oder Pfaden an. Aufruf: 1. diff [-c M | -r N[:M] [ZIEL[@REV]...] 2. diff [-r N[:M]] --old=ZIEL-ALT[@REVALT] [--new=ZIEL-NEU[@REVNEU]] \ [PFAD...] 3. diff URL-ALT[@REVALT] URL-NEU[@REVNEU] 1. Zeigt die Änderungen an ZIELen, wie sie in REV zwischen zwei Revisionen sichtbar sind. ZIELe können alle Arbeitskopien oder URLs sein. Falls ZIELe Arbeitskopiepfade sind, wird standardmäßig BASE für N und die Version der Arbeitskopie für M verwendet; bei URLs muss N angegeben werden und M entspricht HEAD. Die Option »-c M« ist äquivalent zu »-r N:M«, wobei N = M-1 gilt. Die Verwendung von »-c -M« macht es andersherum: »-r M:N« mit N = M-1. 2. Zeigt die Unterschiede zwischen ZIEL-ALT in REVALT und ZIEL-NEU in REVNEU. Wenn PFADe angegeben werden, sind diese relativ zu ZIEL-ALT und ZIEL-NEU, und die Ausgabe ist auf Unterschiede zwischen diesen Pfaden beschränkt. ZIEL-ALT und ZIEL-NEU können Pfade der Arbeitskopie oder der Art URL[@REV] sein. ZIEL-NEU entspricht ZIEL-ALT, falls es nicht angegeben wurde. -r N setzt REVALT auf N, -r N:M setzt REVALT auf N und REVNEU auf M. 3. Kurzform für »svn diff --old=URLALT[@REVALT] --new=URLNEU[@REVNEU]«. Verwenden Sie einfach »svn diff«, um lokale Änderungen in einer Arbeitskopie anzuzeigen. Filterstatistik nicht anzeigen.Revisionseigenschaften nicht filtern.Es ist nichts über die Eigenschaft »%s« bekanntEs ist unklar, wie mit »%s« für Eigenschaft »%s« verfahren werden soll%d Knoten verworfen: %d Knoten verworfen: %d Revision verworfen. %d Revisionen verworfen. Datenstrom enthält fehlerhaften Kopf (ohne »:«) in »%.20s«Datenstrom enthält fehlerhaften Kopf (ohne Wert) in »%.20s«Daten des Dateiabzugs scheinen fehlerhaft zu seinDupliziert etwas in der Arbeitskopie oder im Projektarchiv unter Beibehaltung der Historie. Aufruf: copy QUELLE[@REV]... ZIEL Wenn mehrere Quellen kopiert werden, werden diese als Kinder von ZIEL hinzugefügt, was ein Verzeichnis sein muss. QUELLE und ZIEL können jeweils entweder ein Arbeitskopiepfad (AK) oder eine URL sein: AK -> AK: Kopieren und zum Hinzufügen einplanen (inklusive Historie) AK -> URL: Sofort eine Kopie von AK zur URL übertragen URL -> AK: Eine Kopie von URL nach AK auschecken und zum Hinzufügen einplanen URL -> URL: Vollständig serverseitige Kopie. Wird zum Verzweigen und Markieren (branch & tag) verwendet. Alle QUELLEn müssen vom selben Typ sein. WARNUNG: Für Kompatibilität mit älteren Versionen von Subversion, werden Kopien, die über zwei Arbeitskopiepfade (WC -> WC) vorgenommen wurden, nicht das Projektarchiv kontaktieren. Deswegen könnten sie standardmäßig nicht in der Lage sein, Zusammenführungsinformationen von der Quelle der Kopie in das Ziel weiterzureichen. Ändert eine Eigenschaft mit einem externen Editor. Aufruf: 1. propedit PROPNAME ZIEL... 2. propedit PROPNAME --revprop -r REV [ZIEL] 1. Bearbeitet versionierte Eigenschaften in der Arbeitskopie oder im Projektarchiv. 2. Bearbeitet nicht versionierte entfernte Eigenschaften im Projektarchiv. ZIEL legt nur das Projektarchiv fest, auf das zugegriffen wird. Siehe »svn help propset« für Weiteres zum Setzen von Eigenschaften. Eine URL oder ein versioniertes Objekt muss angegeben werdenLeeres Feld »victim« in BaumkonfliktbeschreibungLeere FehlerlisteLeere Knotenrevision im ZwischenspeicherEndrevision %ld ist ungültig (neueste Revision ist %ld)Eintrag »%s« hat einen ungültigen PlanEintrag »%s« hat einen ungültigen »%s« WertEintrag »%s« hat eine ungültige TiefeEintrag »%s« hat einen ungültigen KnotentypEintrag »%s« hat keine URLDer Spezialstatus von Eintrag »%s« hat sich unerwarteterweise geändertEintrag »%s« ist bereits unter VersionskontrolleEintrag existiert bereitsEintrag enthält nichtkanonischen Pfad »%s«Eintrag für »%s« existiert (die Arbeitsdatei fehlt jedoch)Eintrag »%s« hat eine ungültige Projektarchiv-BasisEintrag für »%s« hat keine URLEintrag für »%s« ist als »kopiert« markiert, aber ist selbst nicht zum Hinzufügen geplant. Vielleicht übertragen Sie ein Ziel, das sich in einem nicht versionierten (oder noch-nicht-versionierten) Verzeichnis befindet?Eintrag hat ein ungültiges AttributEintrag hat keine URLEintrag hat keine RevisionFehler beim Abbrechen des ReportsFehler bei Eintrag %d in Eintragsdatei für »%s«:Fehler beim Weiterschalten der Revisionen nach der Übertragung (Details folgen):Fehler beim Aufrufen eines externen ProgrammesFehler beim Schließen von Verzeichnis »%s«Fehler beim Schließen des DateisystemsFehler beim Schließen der leeren StandardausgabeFehler beim Schließen des Lese-Endes der StandardfehlerausgabeFehler beim Schließen des Schreib-Endes der StandardfehlerausgabeFehler beim Vergleichen von »%s« und »%s«Fehler beim Konvertieren der Tiefe aus Locale nach UTF-8Fehler beim Konvertieren eines Eintrags im Verzeichnis »%s« nach UTF-8Fehler beim Kopieren der Logdatei; die Funktion DB_LOG_AUTOREMOVE könnte den Hotcopy-Algorithmus stören. Falls das Problem weiterhin besteht, versuchen Sie diese Funktion in DB_CONFIG abzuschaltenFehler beim Hinzufügen von »%s«Fehler beim rekursiven Kopieren von »%s«Fehler beim Ermitteln der »letzten Änderungszeit« von »%s«Fehler beim Ermitteln der »letzten Änderungszeit« von »%s«Fehler beim Ermitteln der »letzten Änderungszeit« von »%s«Fehler beim Ermitteln der Prozess-UIDFehler beim Ermitteln der Dateigröße von »%s«Fehler beim Umgang mit der Definition des externen Verweises für »%s«:Fehler in Kindprozess: %sFehler beim Aufräumen nach der Übertragung (Details folgen):Fehler beim Initialisieren der KommandozeilenparameterFehler beim Bearbeiten des Eintrags für »%s«Fehler beim Bearbeiten des Eintrags von »%s«Fehler beim Normalisieren des bearbeiteten Inhalts ins interne FormatFehler beim Normalisieren der Logmeldung ins interne FormatFehler beim Öffnen der Datenbank-SperrdateiFehler beim Analysieren der %s Eigenschaft für »%s«: »%s«Fehler beim Zerlegen von »%s«Fehler beim Einlesen der ParameterFehler beim Zerlegen der VergleichsoptionenFehler beim Abfragen des »memcache«-Servers »%s«Fehler beim Einlesen der RevisionsnummerFehler beim Einlesen der BaumkonfliktvorlageFehler beim Bearbeiten des Befehls »%s« in »%s«Fehler beim Lesen der Änderungen für Schlüssel »%s«Fehler beim Lesen der Antwort auf die %s Anfrage von FestplatteFehler beim Aufzeichnen von Baumkonflikten in »%s«Fehler beim Entfernen der Änderungsliste von Eintrag »%s«Fehler beim Entfernen des Sperreintrags für »%s«Fehler beim Ersetzen der Textbasis von »%s«Fehler beim Ermitteln der Groß-/Kleinschreibung von »%s«Fehler beim Wiederherstellen des Textes für »%s«Fehler beim Holen von REPORT (%d)Fehler beim Holen des Wiederholungs-REPORT (%d)Fehler beim Ausführen von »%s«: Rückgabewert: %d, Parameter: in Verzeichnis »%s«, Basisnamen: %s %s %sFehler beim Ausführen der Katastrophen-Wiederherstellung im laufenden Betrieb (hotcopy); die Funktion DB_LOG_AUTOREMOVE könnte den Hotcopy-Algorithmus stören. Wenn das Problem weiterhin besteht, versuchen Sie diese Funktion in DB_CONFIG abzuschaltenFehler beim Ausführen des Editors.Fehler beim Ausführen des Editors; behalte alle Konflikte bei.Fehler beim Ausführen des Zusammenführungsprogramms.Fehler beim Ausführen des Zusammenführungsprogramms; behalte alle Konflikte bei.Fehler beim Ausführen der Aktion »post-commit«Fehler beim Ausführen der Aktion »post-lock«Fehler beim Ausführen der Aktion »post-unlock«Fehler beim Setzen der Eigenschaft »%s«: Fehler beim Entsperren von Verzeichnissen (Details folgen):Fehler bei der Validierung des Serverzertifikats für »%s«: Fehler beim Warten auf Prozess »%s«Fehler beim Schreiben der Eintragsdatei für »%s«Fehler beim Schreiben des Hashwerts nach »%s«Fehler beim Schreiben des Logs für »%s«Fehler beim Schreiben in Datenstrom: unerwartetes EOFFehler beim Schreiben in »%s«Fehler beim Schreiben nach »%s«: unerwartetes EOFGenau ein Dateiparameter benötigtGenau ein Eigenschaftsname und ein Dateiparameter erforderlichPräfixe ausschließen (und leere Revisionen verwerfen): Präfixe ausschließen: Erwartete, dass »%s« ein Verzeichnis ist, es ist aber eine DateiErwartete, dass »%s« eine Datei ist, es ist aber ein VerzeichnisErwartete »revprops«, fand »%s«Erwartetes Dateisystemformat »%d«; gefunden »%d«Erwartete Dateisystemformat zwischen 1 und %d; fand %dErwartete SQLite-Datenbank wurde nicht gefunden: %sErwartete eine gültige Revisionsnummer samt PfadErwartete, dass aktuelle Revision <= %ld gilt, fand aber %ldErwartete Zeile der Datenbank fehltErwartetes Format des Projektarchivs »%d« oder »%d«; gefunden »%d«Erwartete einen gültigen RevisionsbereichLäuft ab: %s Expliziter Zielparameter benötigtExplizites Ziel erforderlich (»%s« als Eigenschaftswert interpretiert)Export abgeschlossen. Externer Verweis exportiert, Revision %ld. Exportiert, Revision %ld. Externer Verweis, Revision %ld. Auschecken des externen Verweises abgeschlossen. Export des externen Verweises abgeschlossen. Aktualisierung des externen Verweises abgeschlossen. Zusätzliche Zeile der Datenbank wurde gefundenDas Dateisystemformat ist zum Packen zu alt, bitte aktualisieren Sie.Konnte Verzeichnis »%s« nicht hinzufügen: ein nicht-Verzeichnisobjekt mit demselben Namen existiert bereitsKonnte Verzeichnis »%s« nicht hinzufügen: ein versioniertes Verzeichnis mit demselben Namen existiert bereitsVerzeichnis »%s« konnte nicht hinzugefügt werden: ein nicht versioniertes Verzeichnis mit demselben Namen existiert bereitsKonnte Verzeichnis »%s« nicht hinzufügen: Parameter »copyfrom« wird noch nicht unterstütztKonnte Verzeichnis »%s« nicht hinzufügen, da es denselben Namen wie das Administrationsverzeichnis trägtKonnte die Datei »%s« nicht hinzufügen: ein nicht-Dateiobjekt mit demselben Namen existiert bereitsDatei »%s« konnte nicht hinzugefügt werden: eine nicht versionierte Datei mit demselben Namen existiert bereitsBerechnung der MD5-Summe für »%s« schlug fehlKonnte nicht mit dem Service Control Manager verbindenKonnte winservice_start_event nicht erzeugenKonnte mmap »%s« nicht löschenKonnte WebDAV PROPPATCH nicht ausführenKonnte Sperrinformationen nicht ermittelnMarke »%s« für URL »%s« nicht gefundenKonnte Zeit für Revision %ld nicht ermittelnKonnte keinen exklusiven Zugriff auf das Projektarchiv erlangen Vielleicht hat noch ein anderer Prozess (httpd, svnserve, svn) das Projektarchiv geöffnet?Konnte Sperre für Zielprojektarchiv nicht erhalten, die zurzeit von »%s« gehalten wird Konnte keinen neuen Schlüssel erzeugenKonnte Modul für Dateisystemtyp »%s« nicht ladenKonnte Eigenschaften nicht vom Datenträger ladenPfad von »copyfrom« konnte in der Arbeitskopie nicht gefunden werdenKonnte »%s« nicht als fehlend markieren: ein Objekt mit demselben Namen wurde bereits zur Übertragung eingeplantKonnte URI »%s« nicht zerlegenWiederherstellen von »%s« schlug fehl -- Versuchen Sie statt dessen zu aktualisieren. Ausführen der Aktion »%s« gescheitert; defekter »Symlink«Konnte Aktion »%s« nicht startenKonnte nicht alles in den Datenstrom schreibenFehler beim Schreiben der aktualisierten DateiFehler beim Laden eines PluginsFehler beim Öffnen von »%s«Fehler beim Lesen der Darstellung »%s«Datei »%s« existiert bereitsDatei »%s« hat die MIME-Typ Eigenschaft »binär«Datei »%s« hat inkonsistente ZeilenendenDie Datei »%s« hat lokale ÄnderungenDatei »%s« im Verzeichnis »%s« ist keine versionierte RessourceDatei »%s« ist veraltetDatei »%s« ist veraltet; versuchen Sie zu aktualisierenDatei existiert bereits: Dateisystem »%s«, Revision %ld, Pfad »%s«Datei existiert bereits: Dateisystem »%s«, Transaktion »%s«, Pfad »%s«Datei ist nicht veränderlich: Dateisystem »%s«, Revision %ld, Pfad »%s«Datei nicht gefunden: Revision %ld, Pfad »%s«Datei nicht gefunden: Transaktion »%s«, Pfad »%s«Datei oder Verzeichnis »%s« ist veraltet; versuchen Sie zu aktualisierenVerzeichnis des Dateisystems hat keinen solchen EintragDateisystem hat keinen EintragDateisystem hat keinen solchen Indexdatensatz zur Prüfsummen-RepräsentationDateisystem hat keine solche KopieDateisystem hat keine solche SperreDateisystem hat keinen solchen KnotenursprungsdatensatzDateisystem hat keine solche Knotenrevisions-IdDateisystem hat keine solche DarstellungDateisystem hat keinen solchen StringDateisystem ist bereits geöffnetDateisystem ist beschädigtDateisystem ist nicht geöffnetDateisystemobjekt ist bereits geöffnetDateisystemobjekt ist noch nicht geöffnetPfad »%s« ist weder eine Datei noch ein VerzeichnisDateisystemaktualisierung wird nicht unterstütztKnoten mit den angegebenen Präfixen aus dem Datenstrom ausfiltern. Aufruf: svndumpfilter exclude PFAD_PRÄFIX ... Knoten, die nicht den angegebenen Präfixen entsprechen, aus dem Datenstrom ausfiltern. Aufruf: svndumpfilter include PFAD_PRÄFIX ... Letzte Zeile in der Revisionsdatei ist länger als 64 ZeichenLetzte Zeile in der Revisionsdatei enthält kein LeerzeichenDie erste Zeile von »%s« enthält eine Nicht-ZifferDie erste Revision darf kann nicht größer als zweite seinDie Formatdatei »%s« enthält eine unerwartete Nicht-ZifferFormat einer svn:externals Eigenschaft war ungültigPfad einer Arbeitskopie gefundenEin nicht geschütztes \0 wurde im externen Dateiverweis »%s« gefundenFehlerhafter Kopf in Revisionsdatei gefundenRahmenfehler im »Pipe«-ProtokollGET-Anfrage schlug fehl: %d %sAllgemeiner DateisystemfehlerFand Element »apply-textdelta« ohne vorhergehendes »add-file« oder »open-file«Fand cdata-Inhalt für eine EigenschaftslöschungFand Element »close-directory« ohne vorhergehendes Öffnen eines VerzeichnissesFand Element »close-file« ohne vorhergehendes »add-file« oder »open-file«Quellpfad, aber keine Quellrevision für »%s« erhaltenUnbekannte Codierung »%s«HTTP Pfad nicht gefundenUngültiger Revisionstyp des externen Dateiverweises %d für Pfad »%s«Illegale URL des übergeordneten Verzeichnisses »%s«Illegale Projektarchiv-URL »%s«Illegale Projektarchivwurzel-URL »%s«Illegale svn Projektarchiv URL »%s«Ungültiges Ziel für die angeforderte OperationUnmöglich lange Projektarchivbasis vom ServerFehlerhafte relative URL »%s«In Verzeichnis »%s«In Datei »%s«, Zeile %d: Assert-Anweisung schlug fehl (%s)In Datei »%s«, Zeile %d: interne FehlfunktionPräfixe einschließen (und leere Revisionen verwerfen): Präfixe einschließen: Inkompatible BibliotheksversionUnvollständige DatenUnvollständige Sperrdaten zurückgegebenEigenschaftsblock ist unvollständig oder nicht terminiertStil für Zeilenende ist inkonsistentInkorrekte Parameter übergebenInkorrekte Parameter übergebenIndexInitialisierung der SSPI-Bibliothek schlug fehlEingabe/Ausgabe FehlerNachfrage nach unbekannter EigenschaftUmplatzieren innerhalb des Projektarchivs nicht erlaubtInterner Fehler: Es gibt ein unbekanntes Elternteil (%d) für das »DAV:response« Element innerhalb der MERGE-AntwortUngültige Eigenschaft %s zu »%s«: Eine URL »%s« kann nicht als Zielverzeichnis für eine externe Definition verwendet werdenUngültige Eigenschaft %s zu »%s«: Es können nicht zwei absolute URLs (»%s« und »%s«) in einem externen Verweis verwendet werden; eine muss ein Pfad sein, in den eine absolute oder relative URL ausgecheckt wirdUngültige Eigenschaft %s auf »%s«: Ziel »%s« ist ein absoluter Pfad oder enthält »..«Ungültiger Parameter »conflict_result«Ungültiges »format«-AttributUngültiges Feld »node_kind« in BaumkonfliktbeschreibungUngültige URL »%s«Ungültige URL: Illegales Zeichen in Proxy PortnummerUngültige URL: Negative Proxy PortnummerUngültige URL: Proxy Portnummer ist größer als die maximale TCP Portnummer 65535Ungültiges Argument »%s« in VergleichsoptionenUngültige authz KomfigturationUngültiger Änderungstyp in Rev DateiUngültige Reihenfolge bei Änderung: Neue Knoten Revisions ID ohne LöschenUngültige Reihenfolge bei Änderung: Nicht-hinzufügende Änderung auf gelöschtem PfadUngültiger ÄnderungstypUngültige »changes« Zeile in Rev DateiUngültiges Zeichen »%c« in der Bereichsliste gefundenUngültiges Zeichen »%c« in Revisionsliste gefundenUngültiges Zeichen in der Hex-Prüfsumme gefundenUngültige Konfiguration: Illegales Zeichen in DebugmaskeUngültige Konfiguration: Illegales Zeichen im Timeout-WertUngültige Konfiguration: Negativer Timeout-WertUngültige Konfiguration: PKCS#11-Anbieter »%s« kann nicht geladen werdenUngültige Konfiguration: Zertifikatsdatei »%s« kann nicht geladen werdenUngültige Konfiguration: Unbekannte HTTP-Bibliothek »%s«Ungültige Konfiguration: Unbekannter HTTP-Autorisationstyp »%s«Ungültige Konfiguration: Unbekannte Passwortverwaltung »%s«Ungültiger KonfigurationswertUngültige Konfliktinformation in Baumkonfliktbeschreibung«Ungültiges Steuerzeichen »0x%02x« in Pfad »%s«Ungültiger Quellpfad einer Kopie: »%s«Ungültiges Erzeugungsdatum im Header-Feld in Antwort.Ungültige Tiefe (%c) für Pfad »%s«Ungültiger Diff-Strom: [Neu] insn %d läuft in die neue Datensektion überUngültiger Diff-Strom: [Quelle] insn %d läuft in die Quellansicht überUngültiger Diff-Strom: [Ziel] insn %d startet hinter der ZielpositionUngültiger Diff-Strom: insn %d kann nicht dekodiert werdenUngültiger Diff-Strom: insn %d hat negative LängeUngültiger Diff-Strom: insn %d läuft in die Zielansicht überUngültiger Editoranker; zumindest einer der Eingabepfade ist kein Verzeichnis und es gab keinen QuelleintragUngültige Endrevision %ldUngültiger Abschluss des EintragsUngültige Escape-SequenzUngültiges geschütztes ZeichenUngültige Datei- oder Verzeichnismarke während der BearbeitungUngültige Pfadsyntax des DateisystemsUngültige Revisionsnummer des DateisystemsUngültiger Transaktionsname des DateisystemsUngültige Länge (%%%s) beim Lesen einer ZeichenketteUngültige SperreUngültige Operation auf dem aktuellen ArbeitsverzeichnisUngültige Option. Ungültige Option; Auswahl anhand von Konflikten ist für Eigenschaften nicht möglich. Ungültige Option; Auswahl anhand von Konflikten ist in einer Binärdatei nicht möglich. Ungültige Option; Anzeige von Konflikten ist für Binärdateien nicht möglich. Ungültige Option; Anzeige von Konflikten ist für Eigenschaften nicht möglich. Ungültige Option; Originaldateien nicht verfügbar. Ungültige Option; es gibt keine zusammengeführte Version zum Vergleichen. Ungültige Option; es gibt keine zusammengeführte Version zum Bearbeiten. Ungültige Peg-Revision %ldUngültiges »prop-mod« Flag in Rev DateiUngültiges UmplatzierenUngültiger Report für oberste Ebene der ArbeitskopieUngültige Revisionsnummer »%ld«Ungültige Revisionsnummer (%ld)Ungültige Revisionsnummer beim Einlesen von »%s« gefundenUngültige Revisionsnummer angegebenUngültige Revision angegebenUngültiger PlanUngültige Antwort des Servers auf datierte RevisionsanfrageUngültige Startrevision %ldUngültiges WechselnUngültige Syntax im Argument von --config-optionUngültiger ZielpfadUngültiges »text-mod« Flag in Rev DateiUngültiger Timeout-WertUngültiger Wert (%%%s) für Knotenrevisions-ZusammenführungszählerUngültiger Wert für Feld »%s«Ungültige Versionsinformation in BaumkonfliktbeschreibungUngültige Versionszeile in Datei »entry« von »%s«Objekt existiert bereits im DateisystemEintrag ist nicht lesbarEintrag ist nicht schreibbarEintrag ist veraltetEintrag ist nur teilweise lesbarIteration brach vor der Fertigstellung abNutzlose Knotenrevision im ZwischenspeicherLetzter Autor: %s Letztes ÄnderungsdatumLetzte geänderte Rev: %ld Letzte zusammengeführte Revision: %s Lokal veränderte oder nicht versionierte Dateien zurück gelassenZeilenende anders als erwartetListet alle Eigenschaften von Dateien, Verzeichnissen oder Revisionen auf. Aufruf: 1. proplist [ZIEL[@REV]...] 2. proplist --revprop -r REV [ZIEL] 1. Listet versionierte Eigenschaften in der Arbeitskopie auf. REV bestimmt, in welcher Revision zuerst nachgeschaut wird. 2. Listet nicht versionierte Eigenschaften im Projektarchiv auf. ZIEL legt nur das Projektarchiv fest, auf das zugegriffen wird. Zeigt Verzeichniseinträge im Projektarchiv. Aufruf: list [ZIEL[@REV]...] Listet jede ZIEL-Datei und die Inhalte jedes ZIEL-Verzeichnisses, wie sie im Projektarchiv existieren, auf. Wenn ZIEL eine Arbeitskopie ist, wird die entsprechende URL des Projektarchivs verwendet. REV bestimmt, in welcher Revision zuerst nachgeschaut wird. Die Vorgabe für ZIEL ist ».«, d.h. die URL vom Projektarchiv des aktuellen Verzeichnisses. Mit »--verbose« werden die folgenden Felder pro Objekt angezeigt: Revisionsnummer der letzten Übertragung Autor der letzten Übertragung Falls gesperrt, der Buchstabe »O« (»svn info URL« für Details) Größe (in Bytes) Datum und Zeit der letzten Übertragung Lokale URL »%s« enthält nur einen Rechnernamen aber keinen PfadLokale URL »%s« enthält einen nicht unterstützten RechnernamenLokale URL »%s« enthält keinen »file://« PräfixLokale Operationen ohne Übertragung benötigen keine Logmeldung oder RevisionseigenschaftenOrtseintrag ist keine ListeOrtssegmenteintrag ist keine ListeOrtssegmentreport schlug auf »%s«@»%ld« fehlSperrenSperrkommentar (%i Zeile): %s Sperrkommentar (%i Zeilen): %s Sperre erzeugtSperre läuft abSperreigner: %s Sperrmarke: %s Sperrkommentar enthält ein Null-ByteSperrkommentar enthält illegale ZeichenDie Datei für den Sperrkommentar ist versioniert; geben Sie »--force-log« an, um sie zu verwendenSperrelement ist keine ListeSperren schlug fehl: eine neuere Version von »%s« existiertSperrdatei »%s« ist keine reguläre DateiSperre ist abgelaufenSperre lief aus: Sperrmarke »%s« in Dateisystem »%s«Sperranforderung gescheitert: %d %sAntwort beim Sperren ist keine ListeSperrmarke ist fehlerhaftSperrt Pfade in Arbeitskopie oder URLs im Projektarchiv, so dass kein anderer Anwender Änderungen an ihnen übertragen kann. Aufruf: lock ZIEL... Benutze --force, um eine bereits vorhandene Sperre zu stehlen. Log-Kommando für Verzeichnis »%s« ist falsch platziert»name«-Attribut fehlt im Log-Eintrag (Eintrag »%s« für Verzeichnis »%s«)Logeintrag ist keine ListeLogmeldung enthält ein Null ByteDie Datei für die Logmeldung ist versioniert; geben Sie »--force-log« an, um sie zu verwendenLogpfadeintrag ist keine ZeichenketteLog-Revisionseigenschaftseintrag ist keine ZeichenketteMD5 Prüfsumme fehltMD5-Prüfsummenfehler auf Darstellung »%s«: Erwartet: %s Tatsächlich: %s MIME-Typ »%s« enthält ein ungültiges Zeichen »%c«MIME-Typ »%s« enthält keinen »/«MIME-Typ »%s« hat einen leeren MedientypFehlerhafte URL für ProjektarchivFehlerhafte UUID »%s«Fehlerhaftes XML: %s in Zeile %ldFehlerhafte »copyfrom«-Zeile in KnotenrevisionFehlerhafte »copyroot«-Zeile in KnotenrevisionDateiabzug enthält ungültigen KopfFehlerhafter Dateiabzug: Revision 0 darf keine Knoteneinträge enthaltenFehlerhafte FehlerlisteFehlerhafte DateiFehlerhafte NetzwerkdatenFehlerhafter DarstellungskopfFehlerhafte SchablonendatenFehlerhafter DatenstromFehlerhafte svndiff-Daten in DarstellungFehlerhafte »text rep offset«-Zeile in KnotenrevisionKonflikt beim Zusammenführen während der ÜbertragungDie Zusammenführung aus fremdem Projektarchiv ist nicht kompatibel mit Änderungen der ZusammenführungsinformationenDie Zusammenführungsquelle muss angegeben werdenZusammengeführt mittels:Zusammenführungsinfo-Element ist keine ListeZusammenführungsinformationen für »%s« verweisen auf einen leeren RevisionsbereichEinlesefehler für ZusammenführungsinformationenFehler beim Abrufen des Abwicklungsstapels der ArbeitskopieVersionen in Dateisystemmodul »%s« stimmen nicht überein: gefunden %d.%d.%d%s, erwartet %d.%d.%d%sVersion des ZM »%s« stimmt nicht überein: gefunden %d.%d.%d%s, erwartet %d.%d.%d%sFehlendes »dest« Attribut für »%s«Fehlendes »left« Attribut für »%s«Fehlendes Attribut »realm« in Autorisations-HeaderFehlendes Revisions Attribut für »%s«Fehlendes »right« Attribut für »%s«Fehlendes »timestamp« Attribut für »%s«»%s« fehlt in der Liste der geänderten Pfade von Revision %ldFehlendes Attribut »copyfrom-rev« in Element »add-directory«Fehlendes Attribut »copyfrom-rev« in Element »add-file«Fehlender »cpath« in KnotenrevisionFehlender StandardeintragFehlendes Zeilenende in Datei »wcprops« für »%s«Fehlender Abschluss des EintragsFehlendes ID-Feld in KnotenrevisionFehlendes Feld »kind« in KnotenrevisionFehlender Zusammenführungsquellpfad »%s«; versuchen Sie es mit --skip-missing-merge-sourcesFehlendes Namensattribut in Element %sFehlendes Namensattribut in Element »absent-directory«Fehlendes Namensattribut in Element »absent-file«Fehlendes Namensattribut in Element »add-directory«Fehlendes Namensattribut in Element »add-file«Fehlendes Namensattribut in Element »delete-entry«Fehlendes Namensattribut in Element »open-directory«Fehlendes Namensattribut in Element »open-file«Fehlendes Namensattribut in Element »remove-prop«Fehlendes Namensattribut in Element »revprop«Fehlendes Namensattribut in Element »set-prop«Fehlende Knoten-Id in KnotenrevisionFehlender Pfad ParameterFehlendes Pfadattribut in Ressourcen-ElementEigenschaftsname und Pfad im Projektarchiv nicht angegebenFehlender PROPNAME ParameterEigenschaftsname oder Pfad im Projektarchiv nicht angegebenFehlende Option für Pfad des ProjektarchivsFür den Knoten fehlt eine erforderliche Revisions IDEs wurde keine Revision angegebenFehlendes Revisionsattribut in Element »open-directory«Fehlendes Revisionsattribut in Element »open-file«Fehlendes Revisionsattribut in Element »target-revision«Fehlende RevisionFehlendes Revisionsattribut in Element »delete-entry«Fehlendes Revisionsattribut in Element »open-directory«Fehlendes Revisionsattribut in Element »open-file«Fehlendes Revisionsattribut in Element »open-root«Fehlendes Revisionsattribut in Element »target-revision«GeändertModifiziert: %s Geändert: %s%sModul zum Zugriff auf ein Projektarchiv auf der lokalen FestplatteModul zum Zugriff auf ein Projektarchiv über das svn-NetzwerkprotokollModul zum Zugriff auf ein Projektarchiv über das svn-Netzwerkprotokoll. - mit Cyrus-SASL-AuthentifizierungModul zum Zugriff auf ein Projektarchiv über das Protokoll WebDAV mittels Neon.Modul zum Zugriff auf ein Projektarchiv über das Protokoll WebDAV mittels serf.Modul zum Zugriff auf ein Berkeley-DB-Projektarchiv.Modul zum Zugriff auf ein dateibasiertes (FSFS) Projektarchiv.Verschiebt oder benennt etwas in der Arbeitskopie oder im Projektarchiv um. Aufruf: move QUELLE... ZIEL Beim Verschieben mehrerer Quellen, werden sie als Kinder von ZIEL hinzugefügt, was ein Verzeichnis sein muss. Hinweis: Dieser Unterbefehl entspricht der Folge »copy« und »delete«. Hinweis: Die Option --revision bewirkt nichts und wird missbilligt. QUELLE und ZIEL können beides Arbeitskopiepfade (AK) oder URLs sein: AK -> AK: Verschieben und zum Hinzufügen (mit Historie) einplanen URL -> URL: Vollständig serverseitiges Verschieben. Alle QUELLEn müssen vom selben Typ sein. Verschiebungen zwischen der Arbeitskopie und dem Projektarchiv sind nicht unterstütztVerschieben eines Pfades von einer Änderungsliste in eine andereMehrere Revisionsparameter gefunden; bitte nicht zweimal -c oder gleichzeitig -r und -c angebenMehrere Revisionsparameter gefunden; Bitte »-r N:M« anstelle »-r N -r M« verwendenDer Rechner und Port muss für den »memcache«-Server »%s« festgelegt werdenDie Revision muss als Zahl, Datum oder »HEAD« angegeben werden, wenn auf eine Revisionseigenschaft zugegriffen wirdDie Parameter schließen sich gegenseitig ausZusammenführungsinformationen sind NULL Zusammenführungsinformationskatalog ist NULL Name bezeichnet kein Verzeichnis des DateisystemsName bezeichnet keine Datei des DateisystemsName ist keine einzelne PfadkomponenteName: %s Negatives Ablaufdatum an svn_fs_lock übergebenNegative Revisionsnummer beim Einlesen von »%s« gefundenNeon konnte die URL »%s« nicht zerlegenNetzwerkverbindung wurde unerwartet geschlossenNetzwerk-Lese-/-SchreibfehlerInitialisierung der Netzwerkverbindung schlug fehlNeuer Eintragsname erforderlich, wenn eine Datei importiert wirdKein ».« Eintrag in: »%s«Kein Pfad für die Anmeldedatei verfügbarKein Anbieter für Anmeldung verfügbarKeine Änderungen der Eigenschaft »%s« für »%s« Eigenschaft »%s« in Revision %ld nicht geändert Keine Übertragungen im ProjektarchivKein gemeinsamer Vorgänger gefunden. Kann nicht mit disjunkten Pfaden arbeitenKeine Kopie mit ID »%s« in Dateisystem »%s«Kein erzeugter PfadVerzeichnis »%s« hat keinen StandardeintragKein Editor gefunden.Kein Editor gefunden; behalte alle Konflikte bei.Kein externer Editor verfügbarKein externes Werkzeug zum Zusammenführen verfügbarKeine Angabe von fetch_func für update_editorKeine Sperre für Pfad »%s« im Dateisystem »%s«Keine Sperrmarke angegebenKein Programm zum Zusammenführen gefunden. Kein Programm zum Zusammenführen gefunden; behalte alle Konflikte bei.Kein Teil des Pfades »%s« wurde in HEAD des Projektarchivs gefundenVor »:« steht kein PfadnameKeine Pfade zum Entsperren angegebenKein Datensatz in der »checksum-reps«-Tabelle für Prüfsumme »%s« im Dateisystem »%s«Kein Datensatz in der »node-origins«-Tabelle für Knoten-ID »%s« im Dateisystem »%s«Ein solches Attribut des XML-Tags existiert nichtKein Eintrag: »%s«Eine solche Darstellung »%s« existiert nichtKeine Revision %ldKeine solche Revision %ld im Dateisystem »%s«Keine solche TransaktionKeine Marke für Pfad »%s« in Dateisystem »%s« angegebenKeine Transaktion namens »%s« in Dateisystem »%s«Kein Benutzer mit dem Dateisystem verbundenZurzeit ist kein Benutzername mit dem Dateisystem »%s« verbundenKeine gültige Quellrevision im gefilterten DatenstromKein gültiger Revisionsbereich »end« im gefilterten DatenstromKein gültiger Revisionsbereich »start« im gefilterten DatenstromKeine versionierten ElternverzeichnisseKeine Schreibsperre in »%s«Knotentyp: Verzeichnis Knotentyp: Datei Knotentyp: keiner Knotentyp: unbekannt Knotenursprung für »%s« existiert im Dateisystem »%s« mit einem anderen Wert (%s) als der, der gespeichert werden soll (%s)Knotenursprung für »%s« existiert mit einem anderen Wert (%s) als der, der gespeichert werden soll (%s)Knotenrevision #»%s« behauptet, Zusammenführungsinformationen zu haben, hat aber keineKnotenrevision »%s« behauptet, Zusammenführungsinformationen zu haben, hat aber keineKnotenrevision »%s« behauptet, über einem Baum, der Zusammenführungsinformationen enthält, zu sitzen, ist aber kein VerzeichnisKnotenrevision »%s@%ld« behauptet, Zusammenführungsinformationen zu haben, hat aber keineEin Nicht-ASCII Zeichen (Kode %d) wurde gefunden, das nicht von/nach UTF-8 konvertiert werden konnteNicht-numerischer Parameter (%s) an -c übergebenNicht-numerische Bereichsgrenze angegebenEin Teil des Dateiinhaltes ist keine ZeichenketteKeine der Umgebungsvariablen SVN_EDITOR, VISUAL oder EDITOR ist gesetzt und keine Laufzeitkonfigurationsoption »editor-cmd« wurde gefundenEs sind nicht alle erforderlichen Revisionen angegebenKeine Berechtigung die Basis der Änderung zu öffnenNicht genügend Parameter angegebenNicht genügend Parameter angegebenLeere Darstellung, aber der Offset ist bereits größer als NullZahl ist größer als MaximumObjekt ist keine RevisionsbasisObjekt ist keine TransaktionsbasisAktualisierung behindertEin oder mehrere Konflikte wurden beim Zusammenführen von r%ld:%ld in »%s« erzeugt. Lösen Sie alle Konflikte auf und starten Sie die Zusammenführung erneut, um die fehlenden Revisionen zusammenzuführenNur SHA1-Prüfsummen können als Schlüssel in der Tabelle checksum-reps verwendet werden. Nur SHA1-Prüfsummen können als Schlüssel in der Tabelle rep_cache verwendet werden. Derzeit werden nur Vergleiche zwischen der Textbasis und den Arbeitsdateien eines Pfades unterstütztNur eine Revision zulässigNach einer URL können nur relative Pfade angegeben werdenOperation ist nicht auf einer Binärdatei ausführbarOperation ist nicht auf einem Verzeichnis ausführbarDie Operation unterstützt nicht mehrere QuellenDie Option --tunnel-user ist nur im Tunnelmodus zulässig. Gibt den Inhalt der angegebenen Dateien oder URLs mit den Revisions- und Autoreninformationen für jede Zeile aus. Aufruf: blame ZIEL[@REV]... Falls angegeben, bestimmt REV, in welcher Revision zuerst nachgeschaut wird. Gibt den Inhalt der angegebenen Dateien oder URLs aus. Aufruf: cat ZIEL[@REV]... Falls angegeben, bestimmt REV, in welcher Revision zuerst nachgeschaut wird. Eigentümer: %s PIN für Token »%s« in Slot »%s«Packe %s ...Inhalt der Datei PAR als zusätzliche Parameter übergebenPassphrase für »%s«: Passwort für GNOME-Schlüsselring »%s«: Passwort für »%s«: Pfad »%s« existiert bereitsPfad »%s« existiert bereits, ist aber kein VerzeichnisPfad »%s« enthält ein Element ».« oder »..«Pfad »%s« existiert nichtPfad »%s« existiert nicht in Revision %ldPfad »%s« existiert nicht in HEAD-RevisionPfad »%s« existiert nicht in Revision %ldPfad »%s« endet mit »%s«, was für diese Operation nicht erlaubt istPfad »%s« hat keine übertragene RevisionPfad »%s« ist bereits vom Benutzer »%s« im Dateisystem »%s« gesperrtPfad »%s« ist nicht länger ein Element einer Änderungsliste. Pfad »%s« ist keine URLPfad »%s« ist kein VerzeichnisPfad »%s« ist keine DateiPfad »%s« ist kein UTF-8Pfad »%s« ist nicht in der Arbeitskopie enthaltenPfad »%s« ist nun ein Element der Änderungsliste »%s«. Pfad »%s« ist nicht gesperrt. Pfad »%s« muss ein unmittelbares Kind von Verzeichnis »%s« seinPfad »%s« wurde in der HEAD-Revision nicht gefundenPfad »%s« wurde in Revision %ld nicht gefundenPfad »%s« existiert nichtPfad hat keine SperrmarkePfad ist bereits gesperrtPfad ist keine ZeichenkettePfad ist kein Verzeichnis in einer ArbeitskopiePfad ist keine Datei in einer ArbeitskopiePfad ist kein direktes Kind des spezifizierten VerzeichnissesPfad ist nicht gesperrtPfadsyntax wird in diesem Zusammenhang nicht unterstütztPfad: %s Pfadnamen sind nicht durch »:« getrenntPeg-Revision muss vor der Endrevision liegenBitte geben Sie »ja« oder »nein« ein: Vorzeitiges EOF vom ServerVorzeitiges Ende der Daten im DateiabzugGibt den Status der Dateien und Verzeichnisse der Arbeitskopie aus. Aufruf: status [PFAD...] Listet ohne weitere Optionen nur lokal geänderte Objekte (kein Netzzugriff) auf. »-q« gibt nur Zusammenfassungen über lokal modifizierte Objekte aus. »-u« fügt Arbeitsrevision und »veraltet«-Informationen des Servers hinzu. »-v« gibt vollständige Revisionsinformationen jedes Objektes aus. Die ersten sieben Spalten der Ausgabe sind jeweils einen Buchstaben breit: Erste Spalte: Sagt aus, ob das Objekt hinzugefügt, gelöscht oder in sonstiger Weise verändert wurde » « keine Änderungen »A« Added - hinzugefügt »C« Conflicted - konfliktbehaftet »D« Deleted - gelöscht »I« Ignored - ignoriert »M« Modified - verändert »R« Replaced - ersetzt »X« nicht versioniertes, von »svn:externals«-Verweis erzeugtes Verzeichnis »?« Objekt ist nicht unter Versionskontrolle »!« Objekt fehlt (durch nicht-svn-Befehl entfernt) oder unvollständig »~« versioniertes Objekt von einem Objekt anderer Art behindert Zweite Spalte: Änderungen von Datei- oder Verzeichniseigenschaften » « keine Änderungen »C« Conflicted - konfliktbehaftet »M« Modified - verändert Dritte Spalte: Arbeitsverzeichnis gesperrt - ja/nein » « nicht gesperrt »L« Locked - gesperrt Vierte Spalte: Geplante Übertragung wird »Hinzufügen mit Historie« enthalten » « Übertragung wird keine Historie enthalten »+« Übertragung wird Historie enthalten Fünfte Spalte: Wurde Objekt umgestellt oder ist ein externer Dateiverweis? » « normal »S« das Objekt hat eine umgeStellte URL relativ zu seinem Elternteil »X« eine von einem eXternen Verweis erzeugte versionierte Datei Sechste Spalte: Sperre im Projektarchiv (ohne -u) » « keine Sperre »K« Sperre vorhanden (mit -u) » « nicht gesperrt, keine Sperre vorhanden »K« gesperrt, Sperre vorhanden »O« gesperrt, Sperre in anderer Arbeitskopie »T« gesperrt, Sperre vorhanden, aber gestohlen »B« nicht gesperrt, Sperre vorhanden aber beschädigt Siebte Spalte: Ist das Objekt Opfer eines Baumkonflikts? » « normal »C« Baumkonflikt Falls das Objekt Opfer eines Baumkonflikts ist, wird eine zusätzliche Zeile nach der Statuszeile des Objekts ausgegeben, die Details zum Konflikt angibt. Die »veraltet«-Informationen erscheinen in der neunten Spalte (bei »-u«): »*« eine neuere Revision existiert auf dem Server » « die Arbeitskopie ist aktuell Die verbleibenden Felder haben eine variable Breite und werden mit Leerzeichen getrennt: die Arbeitsrevision (mit »-u« oder »-v«) die letzte übertragene Revision und der letzte übertragene Autor (mit »-v«) Das Arbeitsverzeichnis ist immer das letzte Feld, daher kann es Leerzeichen enthalten. Beispielausgabe: svn status wc M wc/bar.c A + wc/qax.c svn status -u wc M 965 wc/bar.c * 965 wc/foo.c A + 965 wc/qax.c Status gegenüber Revision: 981 svn status --show-updates --verbose wc M 965 938 kfogel wc/bar.c * 965 922 sussman wc/foo.c A + 965 687 joe wc/qax.c 965 687 joe wc/zig.c Status gegenüber Revision: 981 svn status M wc/bar.c ! C wc/qaz.c > lokal fehlend, eingehend editiert bei Aktualisierung D wc/qax.c Gibt den Eigenschaftswert von Dateien, Verzeichnissen oder Revisionen aus. Aufruf: 1. propget PROPNAME [ZIEL[@REV]...] 2. propget PROPNAME --revprop -r REV [ZIEL] 1. Gibt versionierte Eigenschaften in der Arbeitskopie aus. REV bestimmt, in welcher Revision zuerst nachgeschaut wird. 2. Gibt eine nicht versionierte Eigenschaft im Projektarchiv aus. ZIEL legt nur das Projektarchiv fest, auf das zugegriffen wird. Standardmäßig hängt dieser Unterbefehl eine Leerzeile an das Ende der Eigenschaftswerte an, so dass die Ausgabe hübsch aussieht. Obendrein werden, wenn mehrere Pfade involviert sind, die Pfade den Eigenschaftswerten vorangestellt. Verwenden Sie die Option »--strict«, um diese Formatierungen abzuschalten (dies ist nützlich, um einen binären Eigenschaftswert in eine Datei umzuleiten, steht aber nur zur Verfügung, falls ein einzelnes ZIEL für eine nicht-rekursive propget-Operation angegeben wurde). Problem mit dem ersten Log-Eintrag in einer ArbeitskopieProblem während der Ausführung des LogsProzess »%s« schlug fehl (Grund %d)Prozess »%s« hat Fehlerwert %d zurückgegebenEigenschafts-Diff Element ist keine ListeEigenschaften zu »%s«: Eigenschaft »%s« ist eine EintragseigenschaftEigenschaft »%s« ist keine reguläre EigenschaftEigenschaft »%s« wurde in Pfad »%s« in Revision %ld nicht gefundenEigenschaft »%s« wurde in Pfad »%s« in Transaktion %s nicht gefundenEigenschaft »%s« wurde in Revision %ld nicht gefundenEigenschaft nicht gefundenEigenschaftselement ist keine ListeProtokollfehler: Die MERGE-Antwort für die »%s«-Ressource hat nicht alle angeforderten Eigenschaften zurück geliefert (und Übertragung muss beendet werden)Protokollfehler: Wir haben dem Server mitgeteilt, Ressourcen nicht automatisch zusammenzuführen, aber dieser behauptet, dass »%s« zusammengeführt wurdeStellt Dateien und Verzeichnisse unter Versionskontrolle und plant sie zur Übertragung ins Projektarchiv ein. Das tatsächliche Hinzufügen findet erst beim nächsten Übertragen statt. Aufruf: add PFAD... Eine Python-Ausnahme wurde mit dem Fehler gesetztAbfrage der Zusammenführungsinformationen erfordert Version %d des FSFS-Dateisystem-Schemas; Dateisystem »%s« verwendet nur Version %dZM-Schicht hat die angeforderte OPTIONS-Information nicht erhaltenZM-Schicht konnte keine HTTP-Anforderung erzeugenZM-Schicht konnte keine Eigenschaften bestimmenZM-Schicht konnte die Verbindungsschicht nicht initialisierenZM-Schichtdatei existiert bereitsZM-Schicht Anforderung gescheitertDie Abwicklung der REPORT-Antwort konnte den Editorlauf nicht vollenden.REVISION PFAD -------- ---- REVISION PFAD -------- --------- Eindeutige Namen ausgegangenEinlesen der Bereichsliste endete vor dem ZeilenumbruchLesezugriff verweigert für Basis dieser ÄnderungLesefehler in »Pipe«Lese »%s«Lesen von der Standardeingabe ist nicht erlaubtLesen eines svndiff-Fensters las über Ende der Darstellung hinausWiederherstellung fand eine deltifizierte VerzeichnisrepräsentationWiederherstellung fand einen Nicht-VerzeichnisknotenRäumt die Arbeitskopie rekursiv auf, gibt Sperren frei, nimmt unvollständige Operationen wieder auf, usw. Aufruf: cleanup [PFAD...] Verweis auf einen nicht existierenden Knoten »%s« in Dateisystem »%s«Reintegration kann nur genutzt werden, falls die Revisionen %ld bis %ld vorher von %s in die zurück integrierende Quelle zusammengeführt wurden, aber dies ist nicht der Fall: %sRelative Quellrevision %ld ist im aktuellen Projektarchiv nicht verfügbar.Relocate kann nur den Projektarchivteil der URL ändernEntfernt den Status »konfliktbehaftet« von Dateien oder Verzeichnissen in der Arbeitskopie. Aufruf: resolved PFAD... Hinweis: Dieser Unterbefehl löst weder inhaltlich die Konflikte auf, noch entfernt er Konfliktmarken. Er löscht hauptsächlich die zum Konflikt gehörenden Dateien und ermöglicht es somit, dass das Verzeichnis PFAD wieder übertragen werden kann. Dies wird zugunsten von »svn resolve --accept working« missbilligt. Entfernt eine Eigenschaft von Dateien, Verzeichnissen oder Revisionen. Aufruf: 1. propdel PROPNAME [PFAD...] 2. propdel PROPNAME --revprop -r REV [URL] 1. Entfernt eine versionierte Eigenschaft aus der Arbeitskopie. 2. Entfernt eine nicht versionierte Eigenschaft aus dem Projektarchiv. Entfernt Dateien und Verzeichnisse aus der Versionskontrolle. Aufruf: 1. delete PFAD... 2. delete URL... 1. Jeder PFAD wird zum Löschen bei der nächsten Übertragung markiert. Dateien und Verzeichnisse, die noch nicht übertragen wurden, werden sofort aus der Arbeitskopie entfernt, es sei denn, die Option --keep-local wurde angegeben. PFAD(e), die nicht versioniert oder geändert sind, bzw. entsprechende Einträge enthalten, werden nur gelöscht, wenn die Option »--force« angegeben wird. 2. Jede URL wird mittels einer sofortigen Übertragung aus dem Projektarchiv entfernt. Durch das Filtern geleerte Revisionen entfernen.Sperre für »%s« entfernt. Entferne »%s« aus Änderungsliste »%s«.Revisionen nach dem Filtern neu nummerieren.Darstellung »%s« ist beides: veränderlich und kein VolltextDarstellung »%s« ist nicht veränderlichInhalt der Darstellung zu groß: »%s« erhalten, Grenze ist »%s«Ersetze %s Das Projektarchiv »%s« ist für die Synchronisation nicht initialisiertBasis des Projektarchivs: %s Projektarchiv URL ist beim Import erforderlichUUID des Projektarchivs »%s« entspricht nicht der erwarteten UUID »%s«Die UUID des Projektarchivs entspricht nicht der erwarteten UUIDUUID des Projektarchivs: %s Für diese Operation wird Zugang zum Projektarchiv benötigtZugriffsmethode zum Projektarchiv nicht implementiertProjektarchiv Parameter erforderlichProjektarchiv Parameter erforderlich Anlegen des Projektarchivs schlug fehlProjektarchiv wurde verschobenProjektarchiv hat keine UUIDDas Projektarchiv lässt keine Änderungen an Revisionseigenschaften zu. Bitten Sie den Administrator darum, eine Aktion »pre-revprop-change« einzurichten.Exklusiven Zugriff auf das Projektarchiv erlangt Bitte warten, die Wiederherstellung des Projektarchivs kann einige Zeit dauern ... Exklusiven Zugriff auf das Projektarchiv erlangt Bitte warten, die Aktualisierung des Projektarchivs kann einige Zeit dauern ... Das Projektarchiv wurde permanent nach »%s« verschoben; bitte umplatzierenDas Projektarchiv wurde zeitweilig nach »%s« verschoben; bitte umplatzierenDie URL der Projektarchivwurzel entspricht nicht der erwarteten Wurzel-URLProjektarchivaktualisierung wird nicht unterstütztDarstellung wird geschriebenDarstellung ist nicht vom Typ »delta«Repräsentationsschlüssel für Prüfsumme »%%s« existiert im Dateisystem »%%s« mit einem anderen Wert (%%ld,%%%s,%%%s,%%%s) als der, der gespeichert werden soll (%%ld,%%%s,%%%s,%%%s)Repräsentationsschlüssel für Prüfsumme »%s« existiert im Dateisystem »%s«.Angefragte Tiefe »exclude« wird nicht unterstütztKommandozeilenparameter enthalten reservierten VerzeichnisnamenAuflösen von Konflikten in Arbeitskopiedateien oder -verzeichnissen. Aufruf: resolve --accept=PAR [PFAD...] Bemerkung: Die Option --accept wird zurzeit benötigt. Konflikt von »%s« aufgelöst Ressource ist nicht unter Versionskontrolle.Stellt eine Datei in der Arbeitskopie wieder her (macht die meisten lokalen Änderungen rückgängig). Aufruf: revert PFAD... Hinweis: Dieser Unterbefehl erfordert keinen Netzwerkzugriff und löst Konfliktzustände auf. Er kann jedoch keine gelöschten Verzeichnisse wieder herstellen. Wieder hergestellt »%s« Abfrage der Zusammenführungsinformationen wird von »%s« nicht unterstütztRückgängig gemacht: »%s« Revision %ld als %ld übertragen. Revision %ld passt nicht zur existierenden Revision %ld in »%s«Revision %ld hat eine Nicht-Datei, wo seine Revisionseigenschafts-Datei sein sollteRevision %ld hat eine Revisions-Datei aber keine Revisionseigenschafts-DateiRevision: »%ld« übersprungen Die aktuell kopierte Revision (%ld), zuletzt zusammengeführte Revision (%ld) und Ziel-HEAD (%ld) sind inkonsistent. Haben Sie in das Ziel ohne Verwendung von svnsync übertragen?Revisionseintrag ist keine ListeRevisionsdatei »%s« existiert nicht und r%ld ist nicht gepacktRevisionsdatei hat keinen abschließenden ZeilenumbruchRevisionseigenschaft »%s« ist in diesem Kontext nicht erlaubtRevisionseigenschaftspaar ist leerRevisionsbereich nicht erlaubtRevisionstyp erfordert einen Arbeitskopiepfad, keine URLRevision: %ld Revisionen dürfen nicht größer als die Endrevision (%ld) seinRevisionen folgendermaßen neu nummeriert: Ändern einer RevisionseigenschaftBasisobjekt muss eine Transaktionsbasis seinSHA1-Prüfsummenfehler auf Darstellung »%s«: Erwartet: %s Tatsächlich: %s SQLite wurde für %s kompiliert, läuft aber mit %sSQLite-FehlerEs wird erwartet, dass SQLite im Thread-sicheren Modus kompiliert und gestartet wirdSSL wird nicht unterstütztAuf sichere Daten »%s« folgte ein nicht-ASCII Byte %d, das nicht von/nach UTF-8 konvertiert werden konntePlan: hinzufügen Plan: löschen Plan: normal Plan: ersetzen Schema-Format %d wird nicht erkanntBereich ist im »memcache«-Server »%s« nicht erlaubtEine zweite Revision muss angegeben werdenAuswahl: (p) zurückstellenAuswahl: (p) zurückstellen, (mf) volle eigene Datei, (tf) volle fremde Datei, (h) Hilfe:Überträgt Änderungen Ihrer Arbeitskopie ins Projektarchiv. Aufruf: commit [PFAD...] Eine Logmeldung muss angegeben werden; diese kann jedoch leer sein. Wird sie nicht mittels einer --message- oder --file-Option übergeben, wird ein Editor gestartet. Falls Objekte gesperrt sind oder gesperrte Objekte enthalten, werden diese nach einer erfolgreichen Übertragung entsperrt. Sende %s Server-SSL-Zertifikat ist nicht vertrauenswürdigDer Server kann nur von der Basis des Projektarchivs fortfahrenServer gab keine Projektarchivbasis zurückServer unterstützt benutzerdefinierte Revisionseigenschaften mittels log nichtServer unterstützt keine datumsbasierten OperationenServer unterstützt »edit pipelining« nichtServer unterstützt keine SperroperationenServer unterstützt die Abfrage von Informationen über die Projektarchivwurzel nichtDer Server unterstützt das Setzen beliebiger Revisionseigenschaften während eines Commits nichtServer unterstützt das Kommando »get-lock« nichtServer unterstützt das Kommando »lock« nichtServer unterstützt das Kommando »replay« nichtServer unterstützt das Kommando »replay-range« nichtServer unterstützt das Kommando »unlock« nichtServer unterstützt nur Versionen bis zu %dServer erfordert mindestens Version %dDie Serverantwort enthält die erwartete Eigenschaft »deadprop-count« nichtDer Server hat einen unerwarteten Rückgabewert (%d %s) in Antwort auf die Anfrage %s für »%s« zurückgeliefertBasis der Sitzung ist »%s«, aber die Basis des Projektarchivs ist »%s«Neuer Wert für Eigenschaft »%s« für »%s« gesetzt Neuen Wert für Eigenschaft »%s« in Revision %ld gesetzt Setzt den Wert einer Eigenschaft von Dateien, Verzeichnissen oder Revisionen Aufruf: 1. propset PROPNAME PROPWERT PFAD... 2. propset PROPNAME --revprop -r REV PROPWERT [ZIEL] 1. Ändert eine versionierte Datei- oder Verzeichniseigenschaft in der Arbeitskopie. 2. Ändert eine nicht versionierte Eigenschaft in einer Revision des Projektarchivs. (ZIEL legt nur das Projektarchiv fest, auf das zugegriffen wird.) Der Wert kann mit der Option --file statt PROPWERT angegeben werden. Hinweis: svn erkennt die folgenden speziellen, versionierten Eigenschaften, wird aber jede gesetzte Eigenschaft speichern: svn:ignore - Eine durch Zeilenumbruch getrennte Liste von zu ignorierenden »glob«-Dateimustern. svn:keywords - Schlüsselworte, die expandiert werden sollen. Gültige Schlüsselworte sind: URL, HeadURL - Die URL für die Head-Version des Objektes. Author, LastChangedBy - Die letzte Person, die die Datei geändert hat. Date, LastChangedDate - Datum/Zeit der letzten Änderung. Rev, Revision, - Die letzte Revision, in der das Objekt LastChangedRevision geändert wurde. Id - Eine komprimierte Zusammenfassung der vier genannten Schlüsselworte. Header - Ähnlich zu Id, enthält aber die volle URL. svn:executable - Falls vorhanden, wird die Datei ausführbar gemacht. Verwenden Sie »svn propdel svn:executable PFAD...« zum Entfernen. svn:eol-style - Eins aus »native«, »LF«, »CR«, »CRLF«. svn:mime-type - Der MIME-Typ der Datei. Verwendet, um festzustellen, ob die Datei zusammengeführt werden kann und wie sie von Apache übertragen werden soll. Dateien ohne MIME-Typ oder deren MIME-Typ mit »text/« beginnt, werden als Text behandelt. Alles andere wird als binär angesehen. svn:externals - Eine durch Zeilenumbruch getrennte Liste von Modulnamen, die jeder aus einem relativen Verzeichnispfad, optionalen Revisionsmarkern und einer URL bestehen. Die Reihenfolge der drei Elemente führt zu verschiedenem Verhalten. Subversion 1.4 und älter unterstützt nur die folgenden Formate und die URLs können keine Peg-Revisionen haben: foo http://example.org/repos/zig foo/bar -r 1234 http://example.org/repos/zag Subversion 1.5 und neuer unterstützt die obigen Formate und die folgenden, wobei die URLs Peg-Revisionen enthalten dürfen: http://example.com/repos/zig foo -r 1234 http://example.com/repos/zig foo/bar Relative URLs werden in Subversion 1.5 und neuer für alle obigen Formate unterstützt und werden durch eine URL gekennzeichnet, die mit einem der folgenden Zeichenketten startet und ../ auf das übergeordnete Verzeichnis des extrahierten Externals ^/ auf die Wurzel des Projektarchivs // auf das Schema / auf die Wurzel des Servers verweist. Das mehrdeutige Format »relativer_Pfad relativer_Pfad« wird als »relative_URL relativer_Pfad« mit Peg-Revisionsunterstützung gedeutet. svn:needs-lock - Wenn vorhanden, soll die Datei gesperrt werden, bevor sie verändert wird. Setzt den Schreibschutz der Arbeitsdatei, wenn sie nicht gesperrt ist. Verwenden Sie »svn propdel svn:needs-lock PFAD...« zum Entfernen. Die Eigenschaften svn:keywords, svn:executable, svn:eol-style, svn:mime-type und svn:needs-lock können nicht für Verzeichnisse gesetzt werden. Ein nicht-rekursiver Versuch wird scheitern und ein rekursiver Versuch wird die Eigenschaft nur für die Dateien in dem Verzeichnis setzen. Das Setzen der Eigenschaft »%s« für ein nicht lokales Ziel »%s« wird nicht unterstütztDas Setzen einer Eigenschaft für ein nicht lokales Ziel »%s« benötigt eine BasisrevisionDas rekursive Setzen einer Eigenschaft für ein nicht lokales Ziel »%s« wird nicht unterstütztZeigt die Logmeldungen für eine Menge von Revisionen und/oder Dateien. Aufruf: 1. log [PFAD] 2. log URL[@REV] [PFAD...] 1. Gibt die Logmeldungen für einen lokalen PFAD aus (Vorgabe: ».«). Die Vorgabe für den Revisionsbereich ist BASE:1. 2. Gibt die Logmeldungen für die PFADe (Vorgabe: ».«) unterhalb der URL aus. Falls angegeben, bestimmt REV, in welcher Revision die URL zuerst durchsucht wird und der Standardrevisionsbereich ist REV:1. Andernfalls wird die URL in HEAD gesucht und die Vorgabe für den Revisionsbereich ist HEAD:1. Mehrere »-c«- oder »-r«-Optionen dürfen angegeben werden (aber keine Kombination von »-c« und »-r«) und das Mischen von vor- und rückwärtigen Bereichen ist erlaubt. Mit -v werden auch die betroffenen Pfade mit jeder Logmeldung ausgegeben. Mit -q wird die Logmeldung selbst nicht ausgegeben (Hinweis: Diese Option ist kompatibel mit -v). Jede Logmeldung wird nur einmal ausgegeben, selbst wenn mehr als einer der betroffenen Pfade explizit angefragt wurde. Logs folgen per Vorgabe der Historie von Kopien. Benutzen Sie »--stop-on-copy«, um dieses Verhalten, z.B. zum Auffinden von Verzweigungen, zu deaktivieren. Beispiele: svn log svn log foo.c svn log http://www.example.com/repo/projekt/foo.c svn log http://www.example.com/repo/projekt foo.c bar.c Die Größe der unkomprimierten Daten entspricht nicht der gespeicherten OriginallängeFehlende Zusammenführungsquellen übersprungen.Überspringe »%s« Fehlendes Ziel: »%s« übersprungen Überspringe Binärdatei: »%s« Mit dem Inhalt der Logmeldung stimmt etwas nichtsvn_client_diff4 wurde in einer Art aufgerufen, die noch nicht unterstützt wirdQuelle linksQuelle »%s« ist kein VerzeichnisUUID des Quellprojektarchivs: %s Quell URL »%s« ist aus einem fremden Projektarchiv; lasse sie als getrennte ArbeitskopieQuell-URL: %s Quelle und Ziel scheinen sich nicht im selben Projektarchiv zu befinden (Quelle: »%s«; Ziel: »%s«)Quelle rechtsQuell URL »%s« stammt aus einem fremden ProjektarchivSpezieller Fehlerkode, um Serverfehler an den Client zu meldenStandardeigenschaften können nicht explizit als Revisionseigenschaften gesetzt werdenStartrevision %ld ist größer als Endrevision %ldStartrevision muss vor der Endrevision liegenStatus bezogen auf Revision: %6ld Das Speichern der speziellen Eigenschaft »%s« wird vom Projektarchiv verhindert und könnte auf einen Bug in Ihrem Client hindeutenPassphrase unverschlüsselt speichern (ja/nein)? Passwort unverschlüsselt speichern (ja/nein)? Strikte Ausgabe von Eigenschaftswerten ist nur für einzelne Ziele und nicht-rekursive propget-Operationen verfügbarZeichenkette stellt keinen Knoten oder keine Knotenrevisions-Id darStringlänge größer als MaximumUnterbefehl »%s« akzeptiert die Option »%s« nicht Geben Sie »svn help %s« für Hilfe ein. Unterbefehl »%s« akzeptiert die Option »%s« nicht Geben Sie »svnadmin help %s« ein, um Hilfe zu erhalten. Unterbefehl »%s« akzeptiert die Option »%s« nicht Geben Sie »svndumpfilter help %s« für Hilfe ein. Unterbefehl »%s« akzeptiert die Option »%s« nicht Geben Sie »svnlook help %s« ein, um Hilfe zu erhalten. Unterbefehl »%s« akzeptiert die Option »%s« nicht Geben Sie »svnsync help %s« für Hilfe ein. Unterbefehl benötigt einen Parameter Subversion ist ein Programm zur Versionskontrolle. Für weitere Informationen, siehe: http://subversion.tigris.org/ Status für erfolgreiche Bearbeitung wurde zu früh zurückgegebenNachfolger ID »%s« (für »%s«) existiert bereits in Dateisystem »%s«Die Summe der Größen der Unterblöcke überschreitet die gesamte BlocklängeZusammenfassender Vergleich kann nur ein Projektarchiv mit einem Projektarchiv vergleichenKonfliktübersicht für externen Verweis: Konfliktübersicht: Komprimierte svndiff-Daten sind ungültigSvndiff-Daten enthalten defektes FensterSvndiff-Daten enthalten rückwärts gleitenden Blick auf QuellenSvndiff-Daten enthalten defektes FensterSvndiff-Daten enthalten ungültige AnweisungSvndiff-Daten enden unerwartetSvndiff-Daten enthalten ungültigen KopfSvndiff-Daten enthalten rückwärts gleitenden Blick auf QuellenSvndiff-Daten enthalten ungültigen KopfSvndiff Quelllänge ist inkonsistentSymbolische Verweise werden auf dieser Plattform nicht unterstütztSyntaxfehler im »native-eol« Parameter »%s«Syntaxfehler in Revisionsparameter »%s«Syntaxfehler bei der Analyse der Revision »%s«Ziellisten für Vergleiche dürfen nicht gleichzeitig Arbeitskopien und URLs enthaltenZielpfad »%s« existiert nichtTest schlug fehlTest übersprungenText zuletzt geändertText-Deltastück ist kein StringDie %s-Anfrage gab in der Antwort ungültiges XML zurück: %s (%s)Das Merkmal »%s« erfordert Version %d des Dateisystemschemas; Dateisystem »%s« verwendet nur Version %dDie Parameter »--transaction« (-t) und »--revision« (-r) können nicht gleichzeitig angegeben werdenDie CHECKOUT-Antwort enthielt keinen »Location:« KopfDie Umgebungsvariable EDITOR, SVN_EDITOR oder VISUAL oder die Laufzeitkonfigurationsoption »editor-cmd« ist leer oder besteht nur aus Leerzeichen. Erwartete ein Shell-Kommando.Die MERGE-Eigenschaftsantwort hatte einen FehlerstatusDie OPTIONS-Anfrage gab in der Antwort ungültiges XML zurück: %s (%s)Die OPTIONS-Antwort enthielt nicht den angeforderten Wert »activity-collection-set«Die OPTIONS-Antwort enthielt nicht das angeforderte »activity-collection-set«; dies heißt oft, dass die URL nicht WebDAV-fähig istDie OPTIONS-Antwort enthielt nicht den angeforderten Wert »baseline-collection«Die OPTIONS-Antwort enthielt nicht den angeforderten Wert »checked-in«Die OPTIONS-Antwort enthielt nicht den angeforderten Wert »resourcetype«Die OPTIONS-Antwort enthielt nicht den angeforderten Wert »version-controlled-configuration«Die OPTIONS-Antwort enthielt nicht den angeforderten Wert »version-name«Die PROPFIND-Antwort enthielt nicht den angeforderten Wert »resourcetype«Die Umgebungsvariable SVN_MERGE ist leer oder besteht nur aus Leerzeichen. Erwartete ein Shell-Kommando. Die URL »%s« hat eine andere Projektarchiv-Basis als ihr VorgängerDie UUID-Eigenschaft wurde weder auf der Ressource noch ihren Eltern gefunden.Die VCC Eigenschaft wurde in der Ressource nicht gefundenDie Umgebungsvariable SVN_MERGE und die Laufzeitkonfigurationsoption merge-tool-cmd wurden nicht gesetzt. Die externe relative URL »%s« darf keinen Verweis auf übergeordnete Pfade haben, d.h. »..«Die Datei »%s« veränderte sich unerwartet während des VergleichsDer externe Dateiverweis von »%s« kann nicht in »%s« geschrieben werden, solange »%s« in Konflikt stehtDer externe Dateiverweis von »%s« kann nicht das existierende versionierte Objekt bei »%s« überschreibenDer Report »file-revs« enthielt keine RevisionenDie folgenden ZugriffsModule (ZM) für Projektarchive stehen zur Verfügung: Die folgenden Dateisystemmodule für Projektarchive stehen zur Verfügung: Der erzeugte Transaktionsname ist zu langDer »get-file-revs« Befehl gab keine Revisionen zurückDie neueste Revision des Projektarchivs ist %ld. »%s« für Revision %ld existiert nicht im Projektarchiv oder verweist auf ein nicht verwandtes ObjektDer Sperrkommentar ist ein Pfad (war -F gemeint?); geben Sie »--force-log« an, um ihn zu verwendenDie Datei für die Logmeldung ist unter VersionskontrolleDie Logmeldung ist ein PfadnameDie Logmeldung ist ein Pfad (war -F gemeint?); geben Sie »--force-log« an, um sie zu verwendenDie Operation wurde unterbrochenDer Pfad war kein Teil eines ProjektarchivsDie »relative-path« Eigenschaft wurde in der Ressource nicht gefundenDas Projektarchiv in »%s« hat die uuid »%s«, aber die Arbeitskopie hat »%s«Das Projektarchiv ist gesperrt, möglicherweise zum Retten der DatenbankDie Antwort auf die Anfrage enthielt zumindest einen FehlerDie Antwort enthält eine nicht konforme HTTP-StatuszeileDas Basisverzeichnis kann nicht gelöscht werdenDer Dienst konnte nicht gestartet werdenDer Dienst konnte nicht gestartet werden; ein interner Fehler trat beim Starten des Dienstes aufDie angegebene Vergleichsoption wird nicht unterstütztDie spezifizierte Transaktion ist nicht veränderlichEs existiert bereits ein versioniertes Objekt »%s«Es gibt keine Änderung 0Versuch, den Wert der Eigenschaft auf »%s« zu ändern, aber die Eigenschaft soll gelöscht werden. Versuch, die Eigenschaft zu löschen, aber der Wert soll auf »%s« gesetzt werden. Der Client ist zu alt, um mit der Arbeitskopie »%s« zusammen zu arbeiten. Sie benötigen einen neueren Subversion-Client oder müssen diese Arbeitskopie auf eine ältere Version zurücksetzen. Vergleiche http://subversion.tigris.org/faq.html#working-copy-format-change für Details.Dies ist eine leere Revision zum AuffüllenUm die Eigenschaft %s abzuschalten, ist »svn propdel« zu verwenden; setzen der Eigenschaft auf »%s« wird sie nicht ausschalten.Marke »%s« zeigt auf keine existierende Sperre im Dateisystem »%s«Zu viele Parameter angegebenZu viele Parameter für Import BefehlZu viele verschachtelte ObjekteTransaktion »%s« ist nicht von einer Revision abgeleitet, wie eigenartigTransaktion »%s« ist in Bezug auf Revision »%s« veraltetTransaktion »%s« entfernt. Transaktion abgebrochen, aber Aufräumen schlug fehlAufräumen der Transaktion schlug fehlTransaktion ist totTransaktion ist tot: »%s«Transaktion ist nicht totTransaktion ist nicht tot: »%s«Transaktion ist veraltetTransaktion ist veraltetÜbertrage Daten Durchlauf von »%s« fand keine äußere TiefeBaumkonfliktVersuchte, eine Versionsoperation auf nicht versionierter Ressource auszuführenVersuchte, eine nicht-veränderliche Darstellung zu ändernVersuchen Sie »svn add« oder »svn add --non-recursive«.Versuchen Sie »svn help« für weitere InformationenVersuchen Sie »svn mkdir --parents« stattdessen?Versuchen Sie »svn revert --depth infinity« stattdessen?Geben Sie »svnadmin help« für weitere Hilfe einVersuchen Sie »svndumpfilter help« für weitere InformationenVersuchen Sie »svnlook help« für weitere InformationenVersuchen Sie »svnsync help« für weitere InformationenVersuch, eine neue Eigenschaft »%s« mit dem Wert »%s« anzulegen, aber die Eigenschaft existiert bereits mit dem Wert »%s«.Versuch, die Eigenschaft »%s« von »%s« in »%s« zu ändern, aber die Eigenschaft wurde lokal gelöscht.Versuch, die Eigenschaft »%s« von »%s« in »%s« zu ändern, aber die Eigenschaft existiert bereits mit dem Wert »%s«.Versuch, die Eigenschaft »%s« von »%s« in »%s« zu ändern, aber die Eigenschaft wurde lokal mit dem Wert »%s« hinzugefügt.Versuch, die Eigenschaft »%s« von »%s« in »%s« zu ändern, aber die Eigenschaft existiert nicht.Versuch, die Eigenschaft »%s« von »%s« in »%s« zu ändern, aber die Eigenschaft wurde lokal von »%s« in »%s« geändert.Versuch, die Eigenschaft »%s« mit dem Wert »%s« anzulegen, aber die Eigenschaft wurde lokal bereits gelöscht.Versuch, die Eigenschaft »%s« mit dem Wert »%s« zu löschen, aber der Wert wurde von »%s« in »%s« geändert.Versuch, die Eigenschaft »%s« mit dem Wert »%s« zu löschen, aber der lokale Wert ist »%s«.Versuch, ein nicht unterstütztes Merkmal zu benutzenFür Tunnelschema %s muss die Umgebungsvariable %s definiert seinZwei oberste Reports ohne ZielangabeZwei versionierte Ressourcen sind nicht verwandtGeben Sie »%s --help« für weitere Hilfe ein. Geben Sie »%s help« für weitere Hilfe ein. Geben Sie »svnversion --help« für weitere Hilfe ein. URL »%s« existiert nicht in Revision %ldURL »%s« in Revision %ld ist weder eine Datei noch ein VerzeichnisURL »%s« enthält ein »..« ElementDie URL »%s« beginnt nicht mit einem SchemaDie URL »%s« existiert nichtURL »%s« stimmt nicht mit der existierenden URL »%s« in »%s« übereinURL »%s« ist fehlerhaft oder das Schema, der Rechner oder Pfad fehltDie URL »%s« ist kein Kind der Projektarchivwurzel-URL »%s«URL »%s« ist kein Kind der Projektarchivwurzel-URL »%s« der SitzungURL »%s« ist nicht korrekt URI-kodiertURL »%s« existiert nicht in Revision %ldURL »%s« existiert nicht in dieser RevisionURL »%s« des existierenden Verzeichnisses »%s« entspricht nicht der erwarteten URL »%s«URL »%s« der existierenden Datei »%s« entspricht nicht der erwarteten URL »%s«URL »%s« verweist auf auf ein VerzeichnisDie URL »%s« verweist auf eine Datei, nicht auf ein VerzeichnisURL-Zugriff wegen unbekannter Ursache verbotenURL hat kein Schema: »%s«URL: %s Die URLs haben kein Schema (»%s« und »%s«)UUID-Marke: %s UUID-Fehler: Existierendes Verzeichnis »%s« wurde aus einem anderen Projektarchiv ausgechecktUUID-Fehler: Existierende Datei »%s« wurde aus einem anderen Projektarchiv ausgechecktKann die Existenz des Pfades »%s« nicht prüfenKann Transaktionsverzeichnis in »%s« in Revision %ld nicht anlegenKann keine Daten aus dem Antwortkopf extrahierenKann »%s« in Revision %ld nicht im Projektarchiv findenKann »Auth« Datei nicht findenKann »%s« nicht sperrenUnmöglich über mehrere Projektarchive zu (ent)sperrenKann keinerlei Verzeichnisse erzeugenKann Namen für »%s« nicht erstellenKann keine ra_local-Verbindung zu einer URL aufbauenKann »Auth« Datei nicht zum Lesen öffnenKann »Auth« Datei nicht zum Schreiben öffnenProjektarchiv »%s« kann nicht geöffnet werdenKann Basis der Änderung nicht öffnenKonnte die URL »%s« nicht zerlegenÜberlappende Revisionsbereiche »%s« und »%s« mit verschiedenen Vererbungstypen können nicht verarbeitet werdenRückwärtiger Revisionsbereich »%ld-%ld« kann nicht verarbeitet werdenRevisionbereich »%ld-%ld« mit selber Start- und Endrevision kann nicht verarbeitet werdenUndefiniertes Tunnelschema »%s«Unerwartetes EOF im DatenstromUnerwartetes EOF beim Schreiben der DatenUnerwartetes Ende des EintragsUnerwartetes Ende der Svndiff-EingangsdatenUnerwarteter unveränderlicher Knoten bei »%s«Unerwartete Knotenart %d für »%s«Unerwarteter Knotentyp gefundenUnerwartete oder unbekannte EigenschaftsartUnerwartete Serverantwort bei AnmeldungUnerwartetes »%s« gefunden: Pfad wird als »fehlend« markiertUnbekannter DateisystemtypUnbekannter Dateisystemtyp »%s«Unbekannte XML Kodierung: »%s«Unbekannte AutorisierungsmethodeUnbekannte ÄnderungslisteUnbekannter Befehl »%s«Unbekannter Befehl: »%s« »%s« hat einen unbekannten EintragstypUnbekannter Aufzählungswert in BaumkonfliktbeschreibungUnbekannter Fehler beim Hinzufügen des Servers zu »memcache«Unbekannter Fehler beim Anlegen von apr_memcache_tUnbekannter Fehler beim Erzeugen eines »memcache«-ServersUnbekannter Hostname »%s«Unbekannte Art der Knotenrevision im Zwischenspeicher: »%c«Unbekannter »memcached«-Fehler beim LesenUnbekannter »memcached«-Fehler beim Schreiben»%s« hat einen unbekannten KnotentypUnbekannter Knotentyp für Darstellung »%s«Unbekannter Knotentyp im Zwischenspeicher: »%c«Unbekannte oder unerwartete Art für Pfad »%s«Unbekannter oder unerwarteter Typ für »%s«Unbekanntes Revisionseigenschaftswort »%s« in Log-KommandoUnbekannter Status »%s« in Antwort auf BefehlUnbekannter Status für SperrbefehlUnbekannter Status für EntsperrbefehlUnbekanntes svn-ProtokollkommandoUnbekannter svn_node_kindEntsperrenSperrfreigabe gescheitert: %d %sAntwort beim Entsperren ist keine ListeEntsperren erfolgreich, aber die Aktion »post-unlock« schlug fehlHebt Sperren von Pfaden in Arbeitskopie oder URLs im Projektarchiv auf. Aufruf: unlock ZIEL... Benutzen Sie --force, um die Freigabe zu erzwingen. Nicht zusammenführbare Planungsanforderung für einen EintragNichtlesbarer Pfad angetroffen; Zugriff verweigertUnbekanntes URL-Schema »%s«Unbekanntes URL-Schema für »%s«Unbekannte binäre Datenkodierung, kann nicht entschlüsselnUnbekannte Datei im Parameter von --config-optionUnbekanntes Format für die relative externe URL »%s«Stil für Zeilenende nicht erkanntStil für Zeilenende für »%s« nicht erkanntUnbekanntes Log-Datei Element »%s« in »%s«Unbekannter Knotentyp: »%s«Unerkannte Knotenaktion auf Knoten »%s«Unerkannter Datensatz im DatenstromUnbekannter Revisionstyp für »%s« angefragtUnbekannter DatenstromNicht spezifizierte FehlermeldungNicht unterstütztes DateisystemformatNicht unterstützte Dateisystem-Laderversion (%d) für bdbNicht unterstützte Dateisystem-Laderversion (%d) für fsfsNicht unterstützte Zugriffsmodul-Laderversion (%d) für ra_localNicht unterstützte Zugriffsmodul-Laderversion (%d) für ra_neonNicht unterstützte Zugriffsmodul-Laderversion (%d) für ra_serfNicht unterstützte Zugriffsmodul-Laderversion (%d) für ra_svnNicht unterstützte ABI-Version des ZM-PluginsNicht unterstützter PrüfsummentypDateiabzug Version %d wird nicht unterstütztNicht unterstützter Knotentyp für Pfad »%s«Nicht unterstützte Reporttiefe »%s«Nicht unterstützte Version des ProjektarchivsNicht unterstütztes Schema in SQLite-Datenbank gefundenNicht unterstütztes Format der ArbeitskopieNicht abgeschlossene ID im ZwischenspeicherNicht versionierte Eigenschaft in Revision %ld: Aktualisierung abgeschlossen. Aktualisiert die Arbeitskopie auf eine andere URL. Aufruf: 1. switch URL[@PEGREV] [PFAD] 2. switch --relocate VON NACH [PFAD...] 1. Platziert die Arbeitskopie so um, dass sie eine neue URL im Projektarchiv widerspiegelt. Dieses Verhalten ist ähnlich zu »svn update« und wird verwendet, um eine Arbeitskopie auf einen Zweig oder eine Marke im selben Projektarchiv umzustellen. Falls angegeben, spezifiziert PEGREV, in welcher Revision zuerst nach dem Ziel gesucht wird. Falls --force verwendet wird, führen nicht versionierte, behindernde Pfade in der Arbeitskopie nicht automatisch zu einem Fehler, falls die Umplatzierung versucht, den selben Pfad hinzuzufügen. Falls der behindernde Pfad vom selben Typ (Datei oder Verzeichnis) wie der entsprechende Pfad im Projektarchiv ist, wird er versioniert aber sein Inhalt bleibt wie er ist in der Arbeitskopie. Das bedeutet, dass nicht versionierte Objekte eines behindernden Verzeichnisses ebenso behindernd sein und versioniert werden könnten. Für Dateien werden alle inhaltlichen Unterschiede zwischen der Behinderung und dem Projektarchiv wie lokale Änderungen der Arbeitskopie interpretiert. Alle Eigenschaften des Projektarchivs werden auf den behindernden Pfad angewandt. Verwenden Sie die Option --set-depth, um eine neue Arbeitskopietiefe für die Ziele dieser Operation zu setzen. Zurzeit kann die Tiefe eines Arbeitskopieverzeichnisses nur erhöht werden (tiefer ineinander geschachtelt); eine Verzeichnistiefe kann nicht reduziert werden. 2. Schreibt die Metadaten der Arbeitskopie so um, dass sie einer Änderung der URL folgen. Dies wird verwendet, wenn sich die Basis-URL eines Projektarchivs ändert (z.B. durch eine Schema- oder Hostnamenänderung), während Ihre Arbeitskopie immer noch das selbe Verzeichnis im selben Projektarchiv widerspiegelt. Siehe auch »svn help update« für eine Liste möglicher Buchstaben, die die durchgeführte Aktion beschreiben. Externer Verweis aktualisiert zu Revision %ld. Aktualisiert zu Revision %ld. Eine Aktualisierung dieses Projektarchivs wird nicht unterstützt; versuchen Sie stattdessen »dump« und laden Sie die Daten mit »load« anderswoEine Aktualisierung des diesem Projektarchiv zugrundeliegenden versionierten Dateisystems wird nicht unterstützt; versuchen Sie stattdessen »dump« und laden Sie die Daten mit »load« anderswoBenutzen Sie »--force«, um diese Einschränkung aufzuhebenDie Verwendung zweier URLs ist nicht kompatibel mit Änderungen der ZusammenführungsinformationenBenutzer %s besitzt die Sperre für Pfad »%s« nicht (derzeit gesperrt durch %s)Der Benutzer »%s« versucht, eine von »%s« besessene Sperre im Dateisystem »%s« zu benutzenBenutzername und Sperreigner stimmen nicht übereinBenutzername: Auf gültige UTF-8-Daten (hex:%s) folgte eine ungültige UTF-8-Sequenz (hex:%s)Der Wert kann nur mittels »force« gesetzt werdenFormat der Versionsdatei nicht korrektVersion von »%s« ist unerwartet: gefunden %d.%d.%d%s, erwartet %d.%d.%d%sWARNUNG: Verweis auf Daten in Revision %ld, welche älter als die älteste WARNUNG: ausgegebene Revision (%ld) ist. Das Laden diese Datei in ein WARNUNG: leeres Projektarchiv wird fehlschlagen. Warte auf Freigabe des Projektarchivs; Vielleicht ist es durch einen anderen Prozess geöffnet? Bei Pfaden innerhalb der Arbeitskopie darf nur ein Ziel angegeben werdenBeim Vorbereiten von »%s« für die ÜbertragungWindows-Service-Modus (Service Control Manager)Arbeitskopie »%s« ist nicht gesperrtArbeitskopie »%s« gesperrtArbeitskopie und Zusammnführungsquelle sind für eine Reintegration nicht bereitFormat der Arbeitskopie »%s« ist zu alt (%d); bitte checken Sie die Arbeitskopie erneut ausArbeitskopie ist beschädigtArbeitskopie ist nicht aktuellArbeitskopie nicht gesperrt. Dies ist wahrscheinlich ein Fehler. Bitte melden.Arbeitskopie Pfad »%s« existiert nicht im ProjektarchivTextbasis der Arbeitskopie ist beschädigtSchreiben abgelehnt: Keine Berechtigung, alles von Revision %ld einzulesen.SchreibfehlerSchreibsperre gestohlen in »%s«Falsche Anzahl Ziele angegebenFalscher oder unerwarteter EigenschaftswertXML Daten nicht wohlgeformtXML-Parser schlug in »%s« fehlSie müssen genau einen der Parameter -d, -i, -t oder -X angeben. Sie müssen genau einen der Parameter -d, -i, -t, --service oder -X angeben. Ihr .svn/tmp Verzeichnis könnte fehlen oder beschädigt sein; führen Sie »svn cleanup« aus und versuchen Sie es erneutIhre Logmeldung wurde in einer Temporärdatei abgelegt:[Fehlerausgabe konnte nicht gelesen werden.][Fehlerausgabe konnte nicht mit der aktuellen Locale-Einstellung nicht nach UTF-8 konvertiert werden.]akzeptiere unbekannte SSL-Server-Zertifikate ohne Nachfrage (aber nur mit »--non-interactive«)hinzugefügtdirekte Eltern hinzufügenAllokiere neuen Kopieschlüssel (hole »next-key«)Allokiere neue Knoten-ID (hole »next-key«)Allokiere neuen Darstellungsschlüssel (hole »next-key«)Allokiere neue Darstellung, verwende ID weiter (hole »next-key«)Die apr-memcache-Bibliothek ist nicht verfügbarAutorisierung schlug fehlAutorisierung schlug fehl: %sausführliche MeldungenAnnotieren der WORKING-Revision wird nicht unterstütztErzeuge nächsten KopieschlüsselErzeuge nächste Knoten-IDErzeuge nächsten DarstellungsschlüsselUmgehe das Aktionssystem des ProjektarchivsAktion nach der Änderung der Revisionseigenschaft aufrufenAktion vor der Änderung der Revisionseigenschaft aufrufendie Aktion »post-commit« nach dem Übertragen von Revisionen aufrufendie Aktion »pre-commit« nach dem Übertragen von Revisionen aufrufenKann nicht mit Option »with-revprop« zuweisen (»=« entfernen)Schließe Änderungscursorverbindet mit dem Quellprojektarchiv mit dem Passwort PARverbindet mit dem Quellprojektarchiv mit dem Benutzernamen PARverbindet mit synchronisiertem Projektarchiv mit Passwort PARverbindet mit synchronisiertem Projektarchiv mit Benutzernamen PARKonnte keine Verbindung zum Server herstellenErzeuge ÄnderungenErzeuge Cursor zum Lesen von ZeichenErzeuge Cursor zum Lesen der ÄnderungenDaemonmodusgelöschtLösche ÄnderungenLösche Eintrag aus »copies« TabelleLösche Eintrag aus »nodes« TabelleLösche Darstellungrekursiv absteigen, das gleiche wie --depth=infinityVerzeichnisdeaktiviere das automatische Entfernen von Log-Dateien [Berkeley DB]automatische Eigenschaften ausschaltendeaktiviere »fsync« für jede Übertragungstransaktion [Berkeley DB]Hilfe anzeigenAktualisierungsinformation ausgebenglobale »ignore«- und »svn:ignore«-Einstellungen nicht beachtenkeine interaktiven Rückfragen ausgebenAnmeldeinformationen nicht zwischenspeichernLog-Ausgabe endet bei Kopieroperationengibt den anhängenden Zeilenumbruch nicht ausKeine Unterschiede für hinzugefügte Dateien ausgebenkeine Unterschiede für gelöschte Dateien ausgebenÄnderungslisten nach Übertragung nicht löschenZiele nicht freigebenerledigt. Inkrementell ausgebeneditiertZusammenführungsinformationen sind leer Zusammenführungsinformationskatalog ist leer automatische Eigenschaften einschaltenexportiert%sHole ÄnderungenDateiDurchführung des Befehls erzwingenErzwinge Schreibschutz. Setze Einstellung in der Projektarchivkonfiguration außer Kraft.Gültigkeit der Quelle für die Sperrmeldung erzwingenGültigkeit der Quelle für die Logmeldung erzwingenAufruf: svnadmin UNTERBEFEHL ARCHIV_PFAD [Optionen & Parameter ...] Geben Sie »svnadmin help « ein, um Hilfe zu einem Unterbefehl zu erhalten. Geben Sie »svnadmin --version« ein, um die Programmversion und die Datei- systemmodule zu sehen. Verfügbare Unterbefehle: Aufruf: svndumpfilter UNTERBEFEHL [Optionen & Parameter ...] Geben Sie »svndumpfilter help « ein, um Hilfe zu einem Unterbefehl zu erhalten. Geben Sie »svndumpfilter --version« ein, um die Programmversion zu sehen. Verfügbare Unterbefehle: Aufruf: svnlook UNTERBEFEHL ARCHIV_PFAD [Optionen & Parameter ...] Hinweis: Alle Unterbefehle, die die Parameter »--revision« und »--transaction« akzeptieren, werden ohne diese Parameter die neueste Revision des Projektarchivs verwenden. Geben Sie »svnlook help « ein, um Hilfe zu einem Unterbefehl zu erhalten. Geben Sie »svnlook --version« ein, um die Programmversion und die Datei- systemmodule zu sehen. Verfügbare Unterbefehle: Aufruf: svnsync UNTERBEFEHL ZIEL_URL [Optionen & Parameter ...] Geben Sie »svnsync help « ein, um Hilfe zu einem Unterbefehl zu erhalten. Geben Sie »svnsync --version« ein, um die Programmversion und die Zugriffsmodule zu sehen. Verfügbare Unterbefehle: Hole UUID des ProjektarchivsAusgabe für Verkettung formatierenbeim Zusammenführen Vorgänger ignorierenignoriere jede Projektarchiv-UUID, die im Datenstrom gefunden wird»svn:externals«-Definitionen ignorierenInetd-Modusungültiger Parameter »accept«Pfad in Arbeitskopie beibehaltengibt letzte geänderte statt aktueller Revisionen ausbegrenzt Operation durch Tiefe PAR (»empty«, »files«, »immediates« oder »infinity«)abzuhörender Rechnername oder IP-Adresse [Modus: daemon, listen-once]abzuhörender Rechnername oder IP-Adresse [Modus: daemon, service, listen-once]abzuhörender Port [Modus: daemon, listen-once]abzuhörender Port [Modus: daemon, service, listen-once]»listen-once«-Modus (nützlich zum Debuggen)in das spezifizierte Verzeichnis im Projektarchiv ladenlokal %s, eingehend %s bei %skomplettes Rückführen aller nicht zusammengeführten Änderungen der Quell-URLZwischenverzeichnisse erzeugenRevisionen als zusammengeführt markieren (mit -r verwenden)Maximale Anzahl von Logeinträgenmaximale Anzahl LogeinträgeZusammenführungfehlendfehlende Option --accept»next-id« Datei beschädigtneinkein Elternteil mit »copyfrom«-Information wurde oberhalb »%s« gefundenkeine Fortschrittsanzeige (nur Fehler) auf die Standardausgabenichtsbeim Berechnen von Differenzen Vorgänger berücksichtigenveraltet; versuchen Sie --depth=files oder --depth=immediatesblockiertauf einer Revisionseigenschaft arbeiten (mit -r oder -t verwenden)auf einer Revisionseigenschaft arbeiten (mit -r verwenden)Nicht rekursiv hinabsteigennur auf Elementen der Änderungsliste PAR operieren [äquivalent: --cl]Ausgabe in XMLInhalt der Datei PAR als zusätzliche Parameter übergebenSo wenig wie möglich ausgebenGibt Unterschiede gegenüber der Quelle der Kopie auszusätzliche Informationen ausgebennichts oder nur Zusammenfassungen ausgebenEigenschaft »%s« wurde von »%s« gelöscht. Eigenschaft »%s« wurde von Revision %ld im Projektarchiv gelöscht Eigenschaft »%s« für »%s« gesetzt Eigenschaft »%s« wurde für Revision %ld im Projektarchiv gesetzt Konfiguration aus Datei PAR lesenSperrkommentar aus Datei PAR lesenLogmeldung aus Datei PAR lesenLies Eigenschaftswert aus Datei PARBenutzerkonfigurationsdateien aus dem Verzeichnis PAR lesenlese KopieLese DateisystemrevisionLese KnotenrevisionLese Darstellungdurch Umschreiben der URL umplatzierenBezug zur Änderungsliste entfernenentferne redundante Berkeley-DB-Logdateien aus dem Projektarchiv [Berkeley DB]alle Revisionseigenschaften abfragenkeine Revisionseigenschaften abfragenRevisionseigenschaft PAR abfragenRevisionseigenschaft »%s« in r%ld hat einen unerwarteten Wert im Projektarchiv (eventuell hat jemand anderer sie geändert?)Revisionseigenschaft »%s« in r%ld fehlt unerwarteterweise im Projektarchiv (eventuell hat jemand anderer sie gelöscht?)Revisionseigenschaft »%s« in r%ld ist unerwarteterweise im Projektarchiv vorhanden (eventuell hat jemand anderer sie gesetzt?)Basis des bereitzustellenden VerzeichnissesIm Vordergrund starten (nützlich zum Debuggen) [Modus: daemon]setzt neue Tiefe der Arbeitskopie auf PAR (»empty«, »exclude«, »files«, »immediates« oder »infinity«)setze die UUID des Projektarchivs auf die im Datenstrom gefundeneSetze UUID des ProjektarchivsRevisionseigenschaft PAR in neuer Revision unter Verwendung des Formats name[=Wert] setzenSetze Benutzerkonfigurationsoption im Format: DATEI:ABSCHNITT:OPTION=[WERT] Zum Beispiel: servers:global:http-library=serf Zeige eine Zusammenfassung der ErgebnisseZeige Details für KopienZeige vollständige Pfade anstatt sie einzurückenzeige Hilfe zu einem Unterbefehlgibt die IDs der Knotenrevisionen jedes Pfades ausZeige Versionsinformationen des ProgrammsPasswort PAR angebengibt ein Passwort PAR an (veraltet; siehe --source-password und --sync-password)Benutzername PAR angebengibt einen Benutzernamen PAR an (veraltet; siehe --source-username und --sync-username)automatische Konfliktauflösungsaktion angeben (»postpone«, »base«, »mine-conflict«, »theirs-conflict«, »mine-full«, »theirs-full«, »edit«, »launch«)automatische Konfliktauflösungsaktion angeben (»base«, »working«, »mine-conflict«, »theirs-conflict«, »mine-full«, »theirs-full«)PAR als Sperrkommentar verwendenPAR als Logmeldung verwendenRevisionsnummer PAR angegebenspezifizieren Sie PAR für Revisionsnummer (oder X:Y Bereich)Transaktionsname PAR angebenanzuzeigende Revisionen angeben (»merged«, »eligible«)Speichere »checksum-reps«-DatensatzSpeichere KopiedatensatzSpeichere KnotenrevisionSpeichere KnotenherkunftdatensatzSpeichere DarstellungSpeichere TransaktionsdatensatzUnterbefehl benötigt einen Parameter svn: Starten Sie »svn cleanup«, um die Sperren zu entfernen (Aufruf: »svn help cleanup« für Details) svndiff-Daten verlangten nicht existierende QuelleVon svndiff verlangte Position ist jenseits des DatenstromendesSvndiff Fensterlänge ist beschädigtProtokolldatei von svnservesvnserve: Wurzelpfad »%s« existiert nicht oder ist kein Verzeichnis. svnserve: Die Option --service ist nur gültig, wenn der Prozess durch den Service Control Manager gestartet wurde. UmstellungAufruf des Editors »%s« gab Fehler %d zurückÄnderung stammt aus Revision PAR (wie -r PAR-1:PAR). Falls PAR negativ ist, gleichbedeutend zu -r PAR:PAR-1die in Revision PAR durchgeführte ÄnderungZeitüberschreitung beim Warten auf ServerWert behandeln, als sei er in der Zeichenkodierung PAROperation testen, aber keine Änderungen durchführenTunnelmodusTunnel-Benutzername (Vorgabe ist der Name zur aktuellen UID) [Modus: tunnel]Art des Projektarchivs: »fsfs« (Standard) oder »bdb«Unerwartete Art für revert-base »%s«unbekanntunbekannte Eigenschaft »%s«Unbekannter Operationnicht versioniertAktualisierungAufruf: 1. svnlook propget ARCHIV_PFAD PROPNAME PFAD_IN_PROJ 2. svnlook propget --revprop ARCHIV_PFAD PROPNAME Gibt den Rohwert einer Eigenschaft eines Pfades im Projektarchiv aus. Mit --revprop wird der Rohwert einer Revisionseigenschaft ausgegeben. Aufruf: 1. svnlook proplist ARCHIV_PFAD PFAD_IN_PROJ 2. svnlook proplist --revprop ARCHIV_PFAD Gibt die Eigenschaften eines Pfades im Projektarchiv aus. Mit --revprop werden Revisionseigenschaften ausgegeben. Mit -v werden auch die Eigenschaftswerte ausgegeben. Aufruf: svn [Optionen] [Parameter] Subversion-Kommandozeilenclient, Version %s. Geben Sie »svn help « ein, um Hilfe zu einem Unterbefehl zu erhalten. Geben Sie »svn --version« ein, um die Programmversion und die Zugriffsmodule oder »svn --version --quiet«, um nur die Versionsnummer zu sehen. Die meisten Unterbefehle akzeptieren Datei- und/oder Verzeichnisparameter, wobei die Verzeichnisse rekursiv durchlaufen werden. Wenn keine Parameter angegeben werden, durchläuft der Befehl das aktuelle Verzeichnis rekursiv. Verfügbare Unterbefehle: Aufruf: svnadmin crashtest REPOS_PFAD Öffnet das Projektarchiv in REPOS_PFAD und bricht ab. Simuliert damit einen Prozess der bei geöffnetem Projektarchiv abstürzt. Aufruf: svnadmin create ARCHIV_PFAD Erstellt ein neues, leeres Projektarchiv im ARCHIV_PFAD. Aufruf: svnadmin deltify [-r VON[:BIS]] ARCHIV_PFAD Führt Vorgängerdeltifizierung auf den geänderten Pfaden innerhalb der Revisionsspanne VON:BIS durch. Kurz gefasst komprimiert die Deltifizierung das Projektarchiv, indem nur die Unterschiede oder Deltas zur vorigen Revision gespeichert werden. Falls keine Revisionen angegeben wurden, wird nur die HEAD-Revision deltifiziert. Aufruf: svnadmin dump ARCHIV_PFAD [-r VON[:BIS] [--incremental]] Gibt einen Abzug des Projektarchivs in einem portablen »Dump«-Format auf die Standardausgabe aus. Rückmeldungen gehen auf den Standardfehlerkanal. Gibt die Revisionen VON:BIS aus. Ohne Angabe eines Bereichs werden alle Revisionen ausgegeben. Falls nur VON angegeben wurde, wird nur diese Revision ausgegeben. Bei Angabe von »--incremental«, wird die erste ausgegebene Revision nur die in dieser Revision geänderten Pfade enthalten. Andernfalls wird jeder Pfad im Projektarchiv dieser Revision ausgegeben. (In jedem Fall werden für die zweite und folgende Revisionen, nur in diesen Revisionen geänderte Pfade ausgegeben.) Aufruf: svnadmin help [UNTERBEFEHL...] Beschreibt die Anwendung dieses Programms und seiner Unterbefehle. Aufruf: svnadmin hotcopy ARCHIV_PFAD ARCHIV_PFAD_NEU Erstellt eine Kopie des Projektarchivs im laufenden Betrieb. Aufruf: svnadmin list-dblogs ARCHIV_PFAD Gibt alle Log-Dateien der Berkeley Datenbank aus. WARNUNG: Ändern oder Löschen von Log-Dateien, die noch benutzt werden, wird ihr Projektarchiv beschädigen. Aufruf: svnadmin list-unused-dblogs ARCHIV_PFAD Listet ungenutzte Log-Dateien der Berkeley Datenbank auf. Aufruf: svnadmin load ARCHIV_PFAD Liest einen Datenstrom im »Dump«-Format von der Standardeingabe in das Dateisystem des Projektarchivs ein. Falls das Projektarchiv vorher leer war, wird seine UUID standardmäßig in diejenige geändert, die im Daten- strom spezifiziert ist. Eine Fortschrittsanzeige wird an die Standard- ausgabe gesendet. Aufruf: svnadmin lslocks ARCHIV_PFAD [PFAD-IN-ARCHIV] Gibt Beschreibungen aller Sperren auf oder unter PFAD-IN-ARCHIV aus (was, falls nicht angegeben, die Wurzel des Projektarchivs ist). Aufruf: svnadmin lstxns ARCHIV_PFAD Gibt die Namen aller nicht übertragenen Transaktionen aus. Aufruf: svnadmin pack ARCHIV_PFAD Versucht, das Projektarchiv in ein effizienteres Speichermodell zu transformieren. Dies muss nicht bei allen Projektarchiven möglich sein und in problematischen Fällen wird nichts getan. Aufruf: svnadmin recover ARCHIV_PFAD Lässt die Berkeley-DB-Rettungsprozedur auf einem Projektarchiv laufen. Veranlassen Sie dass, falls Sie Fehlermeldungen erhalten haben, die Sie dazu auffordern. Die Berkeley-DB-Wiederherstellung erfordert exklusiven Zugriff auf das Projektarchiv. Der Vorgang wird nicht gestartet, falls das Projektarchiv von einem anderen Prozess benutzt wird. Aufruf: svnadmin rmlocks REPOS_PFAD SPERR_PFAD... Entferne vorbehaltslos die Sperren von jedem SPERR_PFAD. Aufruf: svnadmin rmtxns ARCHIV_PFAD TXN_NAME... Löscht die benannte(n) Transaktion(en). Aufruf: svnadmin setlog ARCHIV_PFAD -r REVISION DATEI Setzt die Logmeldung der Revision REVISION auf den Inhalt der Datei DATEI. Benutzen Sie »--bypass-hooks«, um die mit den Revisionseigenschaften zu- sammenhängenden Aktionen nicht auszulösen (z.B. falls Sie keine E-Mail- Benachrichtigung durch Ihre »post-revprop-change«-Aktion auslösen wollen oder die Änderung von Revisionseigenschaften in der »pre-revprop-change«- Aktion nicht gestattet wird). ACHTUNG: Revisionseigenschaften sind nicht versioniert. Dieser Befehl überschreibt also die vorherige Logmeldung endgültig. Aufruf: svnadmin setrevprop ARCHIV_PFAD -r REV NAME DATEI Setzt die Eigenschaft NAME der Revision REV auf den Inhalt der Datei DATEI. Mit »--use-pre-revprop-change-hook«/»--use-post-revprop-change-hook« lösen Sie die mit den Revisionseigenschaften zusammenhängenden Aktionen aus (z.B. falls Sie E-Mail-Benachrichtigungen durch Ihre »post-revprop-change«- Aktion versenden wollen). ACHTUNG: Revisionseigenschaften sind nicht versioniert. Dieser Befehl überschreibt also den vorherigen Wert der Eigenschaft. Aufruf: svnadmin setuuid ARCHIV_PFAD [NEUE_UUID] Setzt die Projektarchiv-UUID für das sich unter ARCHIV_PFAD befindliche Projektarchiv neu. Falls NEUE_UUID angegeben ist, wird dies als neue UUID des Projektarchivs verwendet, andernfalls wird eine brandneue UUID für das Projektarchiv erzeugt. Aufruf: svnadmin upgrade AK_PFAD Aktualisiert das unter AK_PFAD befindliche Projektarchiv auf die letzte unterstützte Schema-Version. Diese Funktionalität wird als Hilfe für Projektarchiv-Administratoren angeboten, die neue Subversion-Funktionalitäten verwenden möchten, ohne ein möglicherweise aufwendiges »dump« mit anschließendem »load« auszuführen. Die Aktualisierung führt deswegen nur die unbedingt notwendigen Schritte aus, um dies zu erreichen, während die Integrität des Projektarchivs erhalten bleibt. Es garantiert nicht den optimiertesten Zustand des Projektarchivs wie ein »dump« mit anschließendem »load« dies bewirken würde. Aufruf: svnadmin verify ARCHIV_PFAD Überprüft die im Projektarchiv gespeicherten Daten. Aufruf: svnlook author ARCHIV_PFAD Gibt den Autor aus. Aufruf: svnlook cat ARCHIV_PFAD DATEI_PFAD Gibt den Inhalt einer Datei aus. Ein vorangestellter »/« im DATEI_PFAD ist optional. Aufruf: svnlook changed ARCHIV_PFAD Gibt die geänderten Pfade aus. Aufruf: svnlook date ARCHIV_PFAD Gibt das Datum aus. Aufruf: svnlook diff ARCHIV_PFAD Gibt Unterschiede von geänderten Dateien oder Eigenschaften im GNU-Stil aus. Aufruf: svnlook dirs-changed ARCHIV_PFAD Gibt diejenigen Pfade aus, die (durch Eigenschaftsmodifikationen) selbst bzw. deren Dateien geändert wurden. Aufruf: svnlook help [UNTERBEFEHL...] Beschreibt die Anwendung dieses Programms und seiner Unterbefehle. Aufruf: svnlook history ARCHIV_PFAD [PFAD_IN_PROJ] Gibt Informationen über die Historie eines Pfades im Projektarchiv aus (oder über das Basisverzeichnis, falls kein Pfad angegeben wurde.) Aufruf: svnlook info ARCHIV_PFAD Gibt den Autor, das Datum, die Größe der Logmeldung und die Logmeldung aus. Aufruf: svnlook lock ARCHIV_PFAD PFAD_IN_PROJ Wenn eine Sperre für einen Pfad im Projektarchiv existiert, beschreibe diese. Aufruf: svnlook log ARCHIV_PFAD Gibt die Logmeldung aus. Aufruf: svnlook tree ARCHIV_PFAD [PFAD_IN_PROJ] Gibt den Baum beginnend bei PFAD_IN_PROJ aus (falls angegeben, sonst an der Basis des Baumes), wobei optional die IDs der Knotenrevisionen ausgegeben werden. Aufruf: svnlook uuid ARCHIV_PFAD Gibt die UUID des Projektarchivs aus. Aufruf: svnlook youngest ARCHIV_PFAD Gibt die neueste Revisionsnummer aus. Aufruf: svnserve [-d | -i | -t | -X | --service] [Optionen] Gültige Optionen: Aufruf: svnserve [-d | -i | -t | -X] [Optionen] Gültige Optionen: Aufruf: svnsync copy-revprops ZIEL_URL [REV[:REV2]] Kopiert die Revisionseigenschaften in einem gegebenen Revisionsbereich von der Quelle, mit der es initialisiert wurde, auf das Ziel. Falls REV und REV2 angegeben wurden, werden nur Eigenschaften für die durch diesen Bereich angegebenen Revisionen kopiert. Falls nur REV angegeben wurde, werden nur Eigenschaften für diese Revision kopiert. Falls REV nicht angegeben wurde, werden alle Eigenschaften kopiert, für die die Revisionen früher auf das Ziel übertragen wurden. REV und REV2 müssen Revisionen sein, die vorher auf das Ziel transferiert wurden. Sie können »HEAD« für eine Revision verwenden, im Sinne von »die letzte übertragene Revision«. Aufruf: svnsync help [UNTERBEFEHL...] Beschreibt die Anwendung dieses Programms und seiner Unterbefehle. Aufruf: svnsync info ZIEL_URL Gibt Informationen über das Zielprojektarchiv der Synchronisation aus, das sich unter ZIEL_URL befindet. Aufruf: svnsync initialize ZIEL_URL QUELL_URL Bereitet ein Zielprojektarchiv auf die Synchronisation mit einem anderen Projektarchiv vor. Die Ziel-URL muss auf die Basis eines leeren Projektarchivs ohne übertragene Revisionen zeigen. Das Zielprojektarchiv muss Änderungen an Revisionseigenschaften zulassen. Falls die Quell-URL nicht die Wurzel eines Projektarchivs ist, wird nur der angegebene Teil des Projektarchivs synchronisiert. Übertragungen in das oder Eigenschaftsänderungen im Zielprojektarchiv sollten ausschließlich mit »svnsync« vorgenommen werden. Anders ausgedrückt stellt das Zielprojektarchiv einen Spiegel des Quellprojektarchivs dar, auf den nur lesend zugegriffen werden darf. Aufruf: svnsync synchronize ZIEL_URL Überträgt alle laufenden Revisionen von der Quelle, mit der es initialisiert wurde, zum Ziel. Aufruf: svnversion [OPTIONEN] [AK_PFAD [ANGEH_URL]] Erzeugt eine kompakte »Versionsnummer« für den Pfad AK_PFAD der Arbeitskopie. ANGEH_URL ist der angehängte Teil der URL, welcher benutzt wird, um festzustellen, ob AK_PFAD selbst umgestellt wurde (die Erkennung von Umstellungen selbst innerhalb von AK_PFAD hängt nicht von ANGEH_URL ab). Die Versionsnummer wird auf die Standardausgabe ausgegeben. Ein Beispiel: $ svnversion . /repos/svn/trunk 4168 Die Versionsnummer ist eine einzelne Nummer, falls die Arbeitskopie eine einzelne Revision besitzt, die nicht modifiziert, nicht umgeschaltet ist und eine URL, welche mit ANGEH_URL übereinstimmt. Falls die Arbeitskopie ungewöhnlich ist, ist die Versionsnummer komplexer: 4123:4168 Arbeitskopie aus verschiedenen Revisionen 4168M geänderte Arbeitskopie 4123S umgestellte Arbeitskopie 4123P partielle Arbeitskopie, teilweise ausgecheckt 4123:4168MS geänderte, umgestellte Arbeitskopie aus verschiedenen Revisionen Das Programm gibt »exportiert« aus, falls es in einem Verzeichnis, das keine Arbeitskopie ist, ausgeführt wird. Bei Aufruf ohne Parameter wird das aktuelle Verzeichnis als AK_PFAD angenommen. Gültige Optionen: PAR als Vergleichsprogramm verwendenPAR als externen Editor verwendenPAR als Konflikteditor verwendenPAR als neueres Ziel verwendenPAR als älteres Ziel verwendenVerwende eine andere Zeilenendemarke als den Standard für Dateien mit der Eigenschaft »svn:eol-style native«. PAR kann »LF«, »CR« oder »CRLF« sein.Nutze Deltas bei der AusgabeEin mit Subversion-Versionen vor 1.4 kompatibles Format verwendenEin mit Subversion-Versionen vor 1.5 kompatibles Format verwendenEin mit Subversion-Versionen vor 1.6 kompatibles Format verwendenStrikte Semantik anwendenVerwende Threads anstelle von »fork« [Modus: daemon]verwende/zeige zusätzliche Informationen aus der Zusammenführungsgeschichte anwarte anstatt abzubrechen, wenn das Projektarchiv durch einen anderen Prozess belegt istSchreibe Server-Prozess-ID in Datei PAR [Modus: daemon, listen-once, service]Schreibe Server-Prozess-ID in Datei PAR [Modus: daemon, listen-once]ja||||||| ORIGINAL0707010008519a000041ed0000000000000000000000034cb5500a00000000000000b500010002ffffffffffffffff0000001f00000000root/usr/local/share/locale/ja0707010008519b000041ed0000000000000000000000024cb5500a00000000000000b500010002ffffffffffffffff0000002b00000000root/usr/local/share/locale/ja/LC_MESSAGES0707010008519c000081a40000000000000000000000014cb5500600047dfe000000b500010002ffffffffffffffff0000003900000000root/usr/local/share/locale/ja/LC_MESSAGES/subversion.mo48Y Lp~C%٘)C"bE,ݙ  5 FTpʚߚ  ), V,wv%AFN_n $ #+O!h'ݞ%*3B v.Ɵ#+Fc""Ơ& R;7+ơ'0(K@t.02%H'nA@أ+EW*o%"Ӥ"%9_,}1Lܥ")L$g$'Ħ&!i58.ا)1-Lz%̨& 34C-x$0˩-3*B^&Ȫ.'&?f+$ɫ1, M"e8Ь ج 27*j6CC:;~)׮>K@$1//'7W.)J)33]D/ֳ-*4_p!<B M>j09ڵ09E26˶)8H Ĺ(׹&4'\'w2ٺ$ 1<»595o+&1Լ$)+AU-'Ž62$#W,{41ݾ-4=8r<.,6D'{90.(=,f66%5',]$$)DFd?:4&)[B 02AcBA* A K Vap {N;mN*C%b&,<B3'2 2<#o #"4?H?&$$Di'( 5G d< $7.N+}?"% 27F~"3OdxIKf$}78-Kc} &Fbw")# 2Sd"vR|1!?^'|$$6"%$Hm $2&,Haq &2'Y=%,7Bz>>?=PO-L 3YG)//1J<|.7 !A)cEC>GV&Q/9GW% - <N;;;<?{|A6:'q#M e$&#P788cV^AR@J? 2IP26<2s*-."G(j0 #)G7X8342XP/ =$].u9F%$6A=D;A29H1O$ uE5(%@,_%.$(*A\nDE  %7L!f p+!$$%*     # &; %b >  &     ' 5 SH a  #zBGU!:w/9-,J.w&3<$>c}+& ; Wc$T!y)1@B8'{Le*V6! "C2Y+&:*/ Z t '!F!W!m!+!5!!"!":"%R"&x"""g###&#%#%#$4$T$/o$)$$$4%0;%l%'%%%%"%&%5&"[&)~&)&'&!&'9'W'#t'W''(,((0)A)`)}))-).)*#6*Z*u*$**%*"*8+7M++0+0++*,:G, ,/,:,- ,-!9-9[--#----.6.TQ.S.V.BQ/U/J/'50,]0'00"0 0&1#81n\1@1 2&)2#P20t2S22/3'B3j3%33333 4'$4#L4!p4744&4= 5AH5=5'5+536&P6w666)6"6%797W7r777)767#8bC8e85 9)B9%l9+919/9 :'::b:::C:#:<;>Y;/;;;;<*7<+b<<<7<<=%=5=)S=}====%=> >'4>h\>M>"?6?Q?3b?'?I?%@.@J@<j@7@@ @*A-?A5mA2A&A4A42B)gB*BB/BC/&C VCAwC<CIC.@D4oD6DjDFE_ExEE%EE"E#F16F hF2uFFBFDF=BG:G/G4G4 H!UHwH,HHH*H I?IZI,kIIII!II6JEJ,bJ!JJJJJ& K1KKKdKvK*K KcK=M0O,&P0SPMPP!PQ Q Q-Q=Q!MQ(oQDQQ)Q$RDRURpRRR,aSBSS SCTKTgTT.T#T#TU2UFU#dU#UU>UVV)V@V`VxV(V*VVKVKW aWmW2WW$WLWEHX X X%X!X%Y9>Y2xY-YYY, Z6ZOZlZEZZ-Z([*H[%s[)[+[&[(\$?\%d\\\%\.\],+] X]!y]']*]%]+^@^-Q^/^*^*^0_6_ ?_M_0\_A_d_A4`Av`1`7`"aC(c,lcRcLc39d]md&d-d( e#Ie me.we+e!e&ef$4f-Yfff$f$f,g0g?Ig'gg"gg'gh :h'[h'hhh+h1i6iERiiiii'ij/3j,cj"j8j-j0k2Kk~kkkkkkpl]ql8l7mX@m;mKm,!n Nn#onn(o-@onoo&ooo p+p=pVp0q0Jq'{q%q+q3q)rr ssssst(t(Dt'mt?t#t;t15ugu~uu$u.uv: v$[v#vvvvv$v"w9Bw|w)w wwww+x,Ixvx x'xxx"y')y4Qy6y'yyyzdz {,{j{.8|&g|#|$|||< } I}*j}}/}#}~ ~ !~DB~9~)~u~6aC6e+y*&Є#(2&[/ʅ݅&5,O|.($?YypWVB55ψ#)%I%o1"ljъ* 8:=s1$295W>!ۍ&  3@QUȎڎ)0AE=Ő ؐ4#./R-'(ؑHJJ+')/)C&m"<N4C(x0?Ҕ?FR?ٕ !2=EpGՖN,l;B՗3(Lu|%/7!gINәS"MvMĚh0(>›<:>"y&2Ü$)Ed*#ʝ1( &I"pE ٞ <"c_:ß/Pנ(LCE9YE٢Fhf<ϣE .Rf.1=I?*ǥ5"(hKP-3OQ%891X17$R5*(&ܩQHj&bAW$p4:'6^yݭ((7Q+3"*)!T&v  ]߯R=^fRVPZKU$?Ʋ$%+Qn$ %ϳ0 3=Aq$%ش&%*Do#'ĵ?+,;X2ö)2$\$ŷ1J,w͸! 'H#c,1 &CVk'%ƺ&')%Q%w) (&,(S'|!ļ =-X],*< Y/z'ɾ)%8"^-ȿ*+#/O..-!  -#Nr("#F\`~(<=e?B"& IET#?A@ L.l9Ud|>3!90 jv!"2 =?R}1!G$l++0"1F _.j!* +50a07..A,p,$# ?K"\!-015gy1","2(U*~% ):2Q%$( &'E)m *hV_D9M~')/N&l!#,'1T2, V ^,l)*!"3Dx- !!0C th lXZW`T.(Wdk)0$J okk**d+M&*t/ ?eB}?,\! [-AIaOQtG]UpS%$yTFfPbUIOH4nF<5W\`i6o=YHJ>+hj\0R "=Vr\\T*iR`eH \  u  ><4{+8/!Ehg; /-] y....%B$h!_(8H7Y.44 &, S ]iI6'9@,zB) ;"^8|Pk%r8%1.D>s;J;9;u_)1[YBOAQL&bsJb! a > @%!Yf!S!G""\"/"S")#M-#C{#A#9$<;$0x$F$M$>%A%,&A>&&&8&>&8';X''nK(G(8)6;)Dr))8)c*$r*/**P*-7+Ue+J+2,L9,b,h,_R-5-.-=.6U.5...C.%5/<[/I/D/4'0=\0\00 1&1#?1,c121/1.1."2Q2n2M~2_2V,3J3/3A3P@4b424D'5l5*8R+8<~838J8|:9J9T:fW:P:2;EB;;;;D;p;0j<Y<0<Z&=?=H=T >Q_>6>K>W4??I CaWCCC C C&C*DFJD9DVD0"EESE=E"E=E;8FtFnOG\GHHQH;IWZIcIlJrJZJKQKNKKK68LBoLHLNL?JMHM]Mc1NTNHNN3ONOQOB#P<fPEPTPN>Q?QHQ`R7wR%RRR?SCS1_S-S1SSTxUWUCU#VjJkG`kkkll?l0l?l62m3im-m9m$n**n$UnEznHn6 o,@o0mo-o$oqo3cp<p0p*q<0q9mqqHOrKr'r s$s3s6s'/t<Wt?t6t0 uO >HA)ɦ#ppXXR*֨CY'$ũ\9`E]>WB\8kجsDz*3h^nǮM6^Y*=uhHް'YֱD08u15B-YJҳ>5$'@<h!ǵpC*ƾ60(6Y99ʿ3-85f,4.2-3`3>e/H8(VV=  &D< 5]b2G)q#"bHT<BV|h9)<cSMOB8KNFf2*Q |]3W/f6sAE<3PGba/9^IC3R630j3,HKE$3\>G7o3.&b09UyJHH HVBffI;8G:RRF(GoJ=d@KAM3QZE.Xt;9 MCNHZ)HjW8VVA>G:AE< lIBrBl@B93vmIH.PwGD^U8T0B<swD(kmkCE`o<Z|f 3{  3 V +L Hx 9 - =) :g .  X  t  }@9E8?23+<_>m9ZW<Hv8-^b<5E<3X -0? <LKuKKvemteFHN`p3EEKW`BJE3-05HfNcTbn@+ Hl 8 E I4!-~!0!H!<&"/c"3"p"18#Mj#k#V$$E{$#$+$6%-H%Nv%"%!%q &>|&?&&3'6K'-'''0' (5(I(0b(W(x(d)*)*6*QS*?*l*>R++B+n+h_,,B,M'-Hu-J-G .;Q.O.M.C+/>o//=/-0B303v00}11}1b-2e2q2h3+4'>4'f4-4]4<5BW5H5M516BJ6#6\6n7_}7M7S+8z8p8Ik9-9H93,:*`:M:3:' ;5;IQ;+;;;I<'L<Jt<*<A<?,=-l=-=?=0>W9><>>>!>l?6?q?.B^F^oFWF{&G6G>G H"H8HNHfHQHNH"I,IRINNJ*J7J5K$6K)[KHLdL13MBeMM9BNK|N(NDN:6OCqO&OO!O3P3LP-PP!0QRQ*nQQ'Q'Q0R89R6rRlRS2S1CSSuS*SfSz[TYT+0U+\U/U,U0UEV=\V8V%V0V>*W*iW(W*WvW*_X8X3X5X0-Y4^Y6Y1Y3Y/0Z0`Z'Z-Z0Z<[0U[<[<[?\9@\5z\0\6\']3@]5t]0]0]6 ^C^ J^ V^Tc^g^ _m_m`?`S`saQd0deeK&frf6gQ;gKg6g h9hJVh-h3h?iBCiWi(i9j0Aj:rjHj6jf-kZk'kKl'clWl3l9m;QmYm3m.n]Jn]n<ouCo5o3o&#p&JpJqp9pYpbPqBqQqcHrdrfsExsDs$t(tGt`tyt}umulvqvp/wwK5x;x?xxByEy-z-MzK{z'zBzK2{~{{u|<}CL}<}?}X ~Of~~AҀ* !48V98ɁlHok@$)e60ƃ3=+1i]<;6!r0*Ņ$B9XZ'E [2g2P͇HHg-9ވC2\'6ȉJRJ;ي0)>`?0V9*-['v1*А]NY'Б?I+NuHĒ Z\F[OYu*t;xۜQT$:˝& -7NREٞE9?'(-$>*cC֡wxwKh-ӣDZF*t̤AG`AǦp zzf-\6?K*D-o\[Gl]ʫ((Bk!7YHu)IE&25UhEjEoN<`AoTJgIURRR@[9Z,:H¶i uuffR0;LB?oϹT?<hĻf-][WN.սJT3T't+Bx]`Wz&=_7=;,5>Vt,8c1A?N[f9bVLuKleh$_auOab'B*Mm>pAkCQWC<H<!^Kx'r?GZRtW`3-lVO?B)Ea]Qr!1>3pcZ:cQ6-'3U06QQC1\l$6YN"AqISXQRRP6|cB hcEQMdKU0T0[S1g>;,<h3`+:f;o8`?\N0 W=$&>6 6W0*$GtW05>3'r)8=3;-o?h-F3t20#("L)oIBE&!l<GG&[-B6D*QoT;=R/=7-`eW].;4jc*2.Ka-K?'Dg06BdWel"kkjgJOBm?E967pU<-[)EYcww56m6a 0 R  2 Z )2 T\ 6 3 T |q $ -rAB<z4;0982r7U`3I'5qc0 W<WN5;q`3-:a06HHMsr m}*C@Z@=*EEdB?">bka,-r!/Qup9* <K*EE6?'v!-)/$N~sii\  "$&-X(i(H(f9)))!)*)**U++kp,t,oQ-H- .-.o.0//0`/*/)//m/EW0x01r1v 223s)3*303$3?41^4N4+4N 5CZ5p5C67S6m6$6E73d7!7C7372838.899k:9;yR;f;-3<a<-<-#=lQ=9=F=9?>+y>>(o??@_@1@1@eA7jAjA- B0;B3lBB<B+B(CDCJD-]DD_D E/EEQFgFB:G}GG?H SH`HU|HKLuMoOOPQ!RSTwUVW}Sq,m5Sb~$9 bjcF$mUk8 ^Ls.)>Oh~WA0w( 2TW7$X?ebG/!B:/i+Pzig@ ph8b5Izh/B^V;"vx`D3X=$ ESZ*EQOX[oN-qM| 1FgH@ 8PaR>CfcbWof{jIC0a!Jw4V  _:N!5&TOiwkV}&\7>}f*+h9UP:%ei~=qq!@GlS;Id'S:J 2d}#je&~UxQ2APNm rlYJwzLCH=RdZDzwB `6}rj ts2hp#dL {9"8v|#^ M [Ta82:nKu'7\xF[5>cmfS|\ui+XDj.}H?%)xLe(lRw-nU")V$.#G[ =%utnM37gTB8=x1S>KjPQ~\ENU@fnA(0r_LI*yl_"?hVFp)`t6v<{@ ,v\g u]'ztpVxz4cf1Y~]yM vWl;4.&as*&1J[We7RjQ<_G!-XI0FA6-'|!bnXy3MM;k>o\Y"<sP(lH4gadE 6#XU@)~%DcoY"DWB6G*_ZK<OR/A Gq.3(/,<4HoI1e1B^PD.T L_A&^* p5g+{'N%K=[| E];ry Oy|09( }D cZ3 ]V{:]`]h+9kk`?tsYMpqZsmE73-F'[ 4. _s+7 ?o 8 B)i<;F5()o,N0Gu%m1 56H`ZdT:u -kU,AcC ^r{Qt,Ku YOR (e) edit - change merged file in an editor (df) diff-full - show all changes made to merged file (r) resolved - accept merged version of file (dc) display-conflict - show all conflicts (ignoring merged version) (mc) mine-conflict - accept my version for all conflicts (same) (tc) theirs-conflict - accept their version for all conflicts (same) (mf) mine-full - accept my version of entire file (even non-conflicts) (tf) theirs-full - accept their version of entire file (same) (p) postpone - mark the conflict to be resolved later (l) launch - launch external tool to resolve conflict (s) show all - show this list --- Changelist '%s': ------- Committed new rev %ld (loaded from original rev %ld) >>> ------- Committed revision %ld >>> Committed revision %ld. Cyrus SASL authentication is available. Error: no prefixes supplied. Fetching external item into '%s' Global options: Log message unchanged or not specified (a)bort, (c)ontinue, (e)dit: Performing status on external item at '%s' Recovery completed. Upgrade completed. Valid options: Warning: %s * adding path : %s ... * deleting path : %s ... * editing path : %s ... * replacing path : %s ... %ld => (dropped) Merged %s:r%s%s Reverse-merged %s:r%s%s (p) postpone - resolve the conflict later (mf) mine-full - accept pre-existing item (ignore upstream addition) (tf) theirs-full - accept incoming item (overwrite pre-existing item) (h) help - show this help - handles '%s' scheme (%a, %d %b %Y) (from %s:%ld) - The certificate has an unknown error. - The certificate has expired. - The certificate hostname does not match. - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! - The certificate is not yet valid. ARG done. with no output. with output: "%s": unknown command. %b %d %Y%b %d %H:%M%s (revision %ld)%s (working copy)%s blocked by %s hook (exit code %d)%s hook failed (exit code %d)%s of '%s'%s of '%s': %d %s (%s://%s)%s, version %s compiled %s, %s %s: (Not a valid URL) %s: (Not a versioned resource) %sProperty changes on: %s%s%swarning: %s '%s' is not the same repository as '%s''%s' already exists'%s' already exists and is in the way'%s' already exists and is not a directory'%s' contains invalid filesystem format option '%s''%s' does not appear to be a URL'%s' does not appear to be a working copy path'%s' does not define '%s()''%s' does not exist'%s' does not exist in revision %ld'%s' does not have a URL associated with it'%s' ends in a reserved name'%s' exists and is non-empty'%s' exists and is not a directory'%s' has an unrecognized node kind'%s' has local modifications'%s' has lock token, but no lock owner'%s' has no URL'%s' has no ancestry information'%s' hook failed (did not exit cleanly: apr_exit_why_e was %d, exitcode was %d). '%s' hook succeeded, but error output could not be read'%s' in revision %ld is an unrelated object'%s' is a URL when it should be a path '%s' is a URL, but URLs cannot be commit targets'%s' is a URL, probably should be a path'%s' is a directory, and thus cannot be a member of a changelist'%s' is a reserved name and cannot be imported'%s' is a wcprop, thus not accessible to clients'%s' is already a working copy for a different URL'%s' is already under version control'%s' is an URL when it should be a path'%s' is in the way of the resource actually under version control'%s' is marked as absent, so it cannot be scheduled for addition'%s' is neither a file nor a directory name'%s' is not a URL'%s' is not a directory'%s' is not a directory in filesystem '%s''%s' is not a file'%s' is not a file in filesystem '%s''%s' is not a file in revision %ld'%s' is not a file or directory'%s' is not a valid --accept value'%s' is not a valid --show-revs value'%s' is not a valid EOL value'%s' is not a valid Subversion property name'%s' is not a valid administrative directory name'%s' is not a valid depth; try 'empty', 'files', 'immediates', or 'infinity''%s' is not a valid revision range'%s' is not a working copy'%s' is not a working copy directory'%s' is not locked'%s' is not locked in the repository'%s' is not locked in this working copy'%s' is not the root of the repository'%s' is not under version control'%s' is not under version control and is not part of the commit, yet its child '%s' is part of the commit'%s' is scheduled for addition within unversioned parent'%s' is scheduled for addition, but is missing'%s' isn't in the same repository as '%s''%s' locked by user '%s'. '%s' must be from the same repository as '%s''%s' not found'%s' not found in filesystem'%s' not versioned, and not exported '%s' path not found'%s' refers to a directory'%s' returned %d'%s' to '%s' is not a valid relocation'%s' unlocked. '%s' was not found in the repository at revision %ld'%s' was not present on the baseline resource'%s' was not present on the resource'%s@%ld' must be ancestrally related to '%s@%ld''--new' option only valid with '--old' option'--xml' option only valid with '--summarize' option'DAV:baseline-collection' was not present on the baseline resource'get-file-revs' REPORT not implemented'get-file-revs' not implemented'get-location-segments' REPORT not implemented'get-location-segments' not implemented'get-locations' REPORT not implemented'get-locations' not implemented'incremental' option only valid in XML mode'stat' not implemented'verbose' option invalid in XML mode'with-all-revprops' option only valid in XML mode'with-revprop' option only valid in XML mode(Binary files differ) (R)eject or accept (t)emporarily? (R)eject, accept (t)emporarily or accept (p)ermanently? (invalid date)(local)(no author)(no date)(s) show all options: * Dumped revision %ld. * Verified revision %ld. , (mc) mine-conflict, (tc) theirs-conflict, (mf) mine-full, (tf) theirs-full, (df) diff-full, (e) edit, (r) resolved--- Merging (from foreign repository) r%ld into '%s': --- Merging (from foreign repository) r%ld through r%ld into '%s': --- Merging differences between foreign repository URLs into '%s': --- Merging differences between repository URLs into '%s': --- Merging r%ld into '%s': --- Merging r%ld through r%ld into '%s': --- Reverse-merging (from foreign repository) r%ld into '%s': --- Reverse-merging (from foreign repository) r%ld through r%ld into '%s': --- Reverse-merging r%ld into '%s': --- Reverse-merging r%ld through r%ld into '%s': ----------------------------------------------------------------------- ATTENTION! Your password for authentication realm: %s can only be stored to disk unencrypted! You are advised to configure your system so that Subversion can store passwords encrypted, if possible. See the documentation for details. You can avoid future appearances of this warning by setting the value of the 'store-plaintext-passwords' option to either 'yes' or 'no' in '%s'. ----------------------------------------------------------------------- --This line, and those below, will be ignored----accept=%s incompatible with --non-interactive--auto-props and --no-auto-props are mutually exclusive--depth and --set-depth are mutually exclusive--depth cannot be used with --reintegrate--encoding option applies only to textual Subversion-controlled properties--force cannot be used with --reintegrate--reintegrate cannot be used with --ignore-ancestry--reintegrate cannot be used with --ignore-ancestry or --record-only--reintegrate cannot be used with --record-only--relocate and --depth are mutually exclusive-r and -c can't be used with --reintegrate.merge-left.r%ld.merge-right.r%ld.working; run 'svn update' to complete it<<< Started new transaction, based on original revision %ld is missing ancestryA MERGE response for '%s' is not a child of the destination ('%s')A checksum mismatch occurredA conflict in the working copy obstructs the current operationA log message was given where none was necessaryA path under version control is needed for this operationA problem occurred; see other errors for detailsA report cannot be generated because no data was suppliedA repository hook failedA representation vanished or changed between readsA working copy merge source needs an explicit revisionARG (some commands also take ARG1:ARG2 range) A revision argument can be one of: NUMBER revision number '{' DATE '}' revision at start of the date 'HEAD' latest in repository 'BASE' base rev of item's working copy 'COMMITTED' last commit at or before BASE 'PREV' revision just before COMMITTEDAborting commit: '%s' remains in conflictAccess scheme mixtures not yet supported ('%s' and '%s')Activity not foundAddedAdded: %s Added: %s%sAdding %s Adding (bin) %s Adding a directory failed: %s on %s (%d)All authentication providers exhaustedAll non-relative targets must have the same root URLApache got a malformed URIApache has no path to an SVN filesystemApply-textdelta already activeApply-textdelta not activeAre all the targets part of the same working copy?Argument to --limit must be positiveAssociate (or dissociate) changelist CLNAME with the named files. usage: 1. changelist CLNAME TARGET... 2. changelist --remove TARGET... At least one property change failed; repository is unchangedAt least one revision (r%ld) not yet merged from '%s'At least one revision must be non-local for a pegged diffAt revision %ld. Attempt to change immutable filesystem nodeAttempt to deltify '%s' against itselfAttempt to fetch capability '%s' resulted in '%s'Attempt to pop empty WC unwind stackAttempt to remove or recreate fs root dirAttempt to set wc property '%s' on '%s' in a non-commit operationAttempt to unlock with non-empty unwind stackAttempted command in administrative dirAttempted merge tracking info change on immutable nodeAttempted mergeinfo count change on immutable nodeAttempted removal of immutable nodeAttempted to clone child of non-mutable nodeAttempted to create a node with an illegal name '%s'Attempted to create entry in non-directory parentAttempted to create entry that already existsAttempted to delete a node with an illegal name '%s'Attempted to delete entry '%s' from *non*-directory nodeAttempted to delete entry '%s' from immutable directory nodeAttempted to get checksum of a *non*-file nodeAttempted to get length of a *non*-file nodeAttempted to get textual contents of a *non*-file nodeAttempted to lock an already-locked dirAttempted to make a child clone with an illegal name '%s'Attempted to open node with an illegal name '%s'Attempted to open non-existent child node '%s'Attempted to set entry in immutable nodeAttempted to set entry in non-directory nodeAttempted to set textual contents of a *non*-file nodeAttempted to set textual contents of an immutable nodeAttempted to write to non-transactionAttempting restricted operation for modified resourceAttempting to commit to a URL more than onceAuthentication error from server: %sAuthentication failedAuthentication realm: %s Author name cannot contain a newlineAuthorization failedBad ID in cacheBad URL passed to RA layerBad copyfrom arguments receivedBad database version: compiled with %d.%d.%d, running against %d.%d.%dBad database version: got %d.%d.%d, should be at least %d.%d.%dBad merge; ancestor, source, and target not all in same fsBad merge; target '%s' has id '%s', same as ancestorBad parent pool passed to svn_make_pool()Bad property nameBad property name: '%s'Base checksum mismatch on '%s': expected: %s actual: %s Baseline incorrectBerkeley DB deadlock errorBerkeley DB errorBerkeley DB error for filesystem '%s' while %s: Berkeley DB error for filesystem '%s' while closing environment: Berkeley DB error for filesystem '%s' while creating environment: Berkeley DB error for filesystem '%s' while opening environment: Bogus ID '%s' in cacheBogus URLBogus UUIDBogus dateBogus filenameBogus mime-typeBogus revision information givenBogus revision reportBogus server specificationBring changes from the repository into the working copy. usage: update [PATH...] If no revision is given, bring working copy up-to-date with HEAD rev. Else synchronize working copy to revision given by -r. For each updated item a line will start with a character reporting the action taken. These characters have the following meaning: A Added D Deleted U Updated C Conflict G Merged E Existed A character in the first column signifies an update to the actual file, while updates to the file's properties are shown in the second column. A 'B' in the third column signifies that the lock for the file has been broken or stolen. If --force is used, unversioned obstructing paths in the working copy do not automatically cause a failure if the update attempts to add the same path. If the obstructing path is the same type (file or directory) as the corresponding path in the repository it becomes versioned but its contents are left 'as-is' in the working copy. This means that an obstructing directory's unversioned children may also obstruct and become versioned. For files, any content differences between the obstruction and the repository are treated like a local modification to the working copy. All properties from the repository are applied to the obstructing path. Obstructing paths are reported in the first column with code 'E'. Use the --set-depth option to set a new working copy depth on the targets of this operation. Currently, the depth of a working copy directory can only be increased (telescoped more deeply); you cannot make a directory more shallow. Can't accept client connectionCan't add '%s' to a parent directory scheduled for deletionCan't add '%s' to deleted directory; try undeleting its parent directory firstCan't allocate FS mutexCan't append '%s' to '%s'Can't bind server socketCan't calculate requested dateCan't calculate the request body sizeCan't change perms of file '%s'Can't change working directory to '%s'Can't check directory '%s'Can't check path '%s'Can't chmod '%s'Can't close directory '%s'Can't close file '%s'Can't close prototype revision lockfile for transaction '%s'Can't close streamCan't connect to host '%s'Can't convert module path to UTF-8 from UCS-2: '%s'Can't convert string from '%s' to '%s':Can't convert string from '%s' to native encoding:Can't convert string from native encoding to '%s':Can't convert string to UCS-2: '%s'Can't copy '%s' to '%s'Can't create FSFS txn list mutexCan't create FSFS txn-current mutexCan't create FSFS write-lock mutexCan't create a character converter from '%s' to '%s'Can't create a character converter from '%s' to native encodingCan't create a character converter from native encoding to '%s'Can't create cache mutexCan't create directory '%s'Can't create null stdout for hook '%s'Can't create pipe for hook '%s'Can't create process '%s' attributesCan't create server socketCan't create symbolic link '%s'Can't create threadCan't create threadattrCan't create tunnelCan't detect MIME type of non-file '%s'Can't determine the native path encodingCan't expand timeCan't fetch FSFS shared dataCan't find a temporary directoryCan't find a working copy pathCan't find an entryCan't find parent directory's entry while trying to add '%s'Can't flush file '%s'Can't flush file to diskCan't flush streamCan't get address infoCan't get attribute information from file '%s'Can't get attribute information from streamCan't get default file perms for file at '%s' (file stat error)Can't get entries of non-directoryCan't get exclusive lock on file '%s'Can't get file nameCan't get file perms for file at '%s' (file stat error)Can't get hostnameCan't get local hostnameCan't get module file nameCan't get passwordCan't get shared lock on file '%s'Can't get socket timeoutCan't get username or passwordCan't get working directoryCan't grab DSO mutexCan't grab FS mutexCan't grab FSFS mutex for '%s'Can't grab FSFS txn list mutexCan't hide directory '%s'Can't increment mergeinfo count on *file* node-revision %%s to %%%s (> 1)Can't increment mergeinfo count on node-revision %%s to negative value %%%sCan't lock cache mutexCan't lock charset translation mutexCan't make directory '%s'Can't make pipe read handle non-inherited for hook '%s'Can't make pipe write handle non-inherited for hook '%s'Can't manipulate current dateCan't move '%s' to '%s'Can't move source to destCan't open '%s'Can't open directory '%s'Can't open file '%s'Can't open file at '%s'Can't open stderrCan't open stdinCan't open stdio fileCan't open stdoutCan't parse lock/entries hashfile '%s'Can't read contents of linkCan't read directoryCan't read directory '%s'Can't read directory entry in '%s'Can't read file '%s'Can't read first line of format file '%s'Can't read from connectionCan't read length line in file '%s'Can't read length line in streamCan't read stdinCan't read streamCan't recode error string from APRCan't remove '%s'Can't remove directory '%s'Can't remove file '%s'Can't replace '%s' in deleted directory; try undeleting its parent directory firstCan't replace '%s' with a node of a differing type; the deletion must be committed and the parent updated before adding '%s'Can't restore working directoryCan't rewind directory '%s'Can't set access time of '%s'Can't set detached stateCan't set file '%s' read-onlyCan't set file '%s' read-writeCan't set permissions on '%s'Can't set position pointer in file '%s'Can't set position pointer in streamCan't set process '%s' child errfileCan't set process '%s' child errfile for error handlerCan't set process '%s' child inputCan't set process '%s' child outfileCan't set process '%s' cmdtypeCan't set process '%s' directoryCan't set process '%s' error handlerCan't set proplist on *immutable* node-revision %sCan't set text contents of a directoryCan't specify -c with --oldCan't start process '%s'Can't stat '%s'Can't store FSFS shared dataCan't tokenize command '%s'Can't ungrab DSO mutexCan't ungrab FS mutexCan't ungrab FSFS mutex for '%s'Can't ungrab FSFS txn list mutexCan't unlock cache mutexCan't unlock charset translation mutexCan't unlock nonlocked transaction '%s'Can't unlock prototype revision lockfile for transaction '%s'Can't unlock unknown transaction '%s'Can't write to '%s'Can't write to connectionCan't write to file '%s'Can't write to streamCannot calculate blame information for binary file '%s'Cannot change node kindCannot commit both '%s' and '%s' as they refer to the same URLCannot compare file contents between two different filesystemsCannot compare property value between two different filesystemsCannot copy between two different filesystems ('%s' and '%s')Cannot copy or move '%s': it is not in the repository yet; try committing firstCannot copy path '%s' into its own child '%s'Cannot copy revprops for a revision (%ld) that has not been synchronized yetCannot copy to '%s' as it is scheduled for deletionCannot copy to '%s', as it is not from repository '%s'; it is from '%s'Cannot determine revision of working copyCannot display: file marked as a binary type.%sCannot find a URL for '%s'Cannot initialize a repository with content in itCannot invoke editor to get log message when non-interactiveCannot mix repository and working copy sourcesCannot modify transaction named '%s' in filesystem '%s'Cannot move URL '%s' into itselfCannot move path '%s' into itselfCannot negotiate authentication mechanismCannot reintegrate into a working copy not entirely at infinite depthCannot reintegrate into a working copy that has local modificationsCannot reintegrate into a working copy with a switched subtreeCannot reintegrate into mixed-revision working copy; try updating firstCannot replace a directory from withinCannot reverse-merge a range from a path's own future history; try updating firstCannot revert '%s': unsupported entry node kindCannot revert '%s': unsupported node kind in working copyCannot revert addition of current directory; please try again from the parent directoryCannot set '%s' on a directory ('%s')Cannot set '%s' on a file ('%s')Cannot specify a revision range with two URLsCannot specify revision for deleting versioned property '%s'Cannot specify revision for editing versioned property '%s'Cannot specify revision for setting versioned property '%s'Cannot specify revisions (except HEAD) with move operationsCannot unlock path '%s', no authenticated username availableCannot use --username or --password with any of --source-username, --source-password, --sync-username, or --sync-password. Cannot verify lock on path '%s'; no matching lock-token availableCannot verify lock on path '%s'; no username availableCannot write lock/entries hashfile '%s'Cannot write property hash for '%s'Cannot write to the prototype revision file of transaction '%s' because a previous representation is currently being written by another processCannot write to the prototype revision file of transaction '%s' because a previous representation is currently being written by this processCapability entry is not a wordCaught signalCease invocation of this APICertificate information: - Hostname: %s - Valid: from %s until %s - Issuer: %s - Fingerprint: %s Changed paths: Changed-path entry not a listChangelist doesn't matchChangelist: %s Checked out external at revision %ld. Checked out revision %ld. Checkout complete. Checksum mismatch for '%s': expected checksum: %s actual checksum: %s Checksum mismatch for '%s'; expected: '%s', actual: '%s'Checksum mismatch for '%s'; recorded: '%s', actual: '%s'Checksum mismatch for resulting fulltext (%s): expected checksum: %s actual checksum: %s Checksum mismatch indicates corrupt text base: '%s' expected: %s actual: %s Checksum mismatch on rep '%s': expected: %s actual: %s Checksum mismatch while reading representation: expected: %s actual: %s Checksum mismatch, file '%s': expected: %s actual: %s Checksum mismatch, rep '%s': expected: %s actual: %s Checksum: %s Client certificate filename: Client/server version mismatchCommand 'finish-replay' invalid outside of replaysCommitCommit an unversioned file or tree into the repository. usage: import [PATH] URL Recursively commit a copy of PATH to URL. If PATH is omitted '.' is assumed. Parent directories are created as necessary in the repository. If PATH is a directory, the contents of the directory are added directly under URL. Unversionable items such as device files and pipes are ignored if --force is specified. Commit created rev %ld but should have created %ldCommit failed (details follow):Commit item '%s' has copy flag but an invalid revisionCommit item '%s' has copy flag but no copyfrom URLCommit succeeded, but other errors follow:Commit succeeded, but post-commit hook failedCommitted revision %ld. Committing in directory scheduled for additionCompression of svndiff data failedConfig error: invalid integer value '%s'Config error: invalid value '%s' for option '%s'Conflict Current Base File: %s Conflict Previous Base File: %s Conflict Previous Working File: %s Conflict Properties File: %s Conflict at '%s'Conflict callback violated API: returned no merged fileConflict callback violated API: returned no merged file.Conflict callback violated API: returned no resultsConflict callback violated API: returned no results.Conflict discovered in '%s'. Conflict discovered when trying to add '%s'. An object of the same name already exists. Conflict for property '%s' discovered on '%s'. Conflict resolution failedCopied From Rev: %ld Copied From URL: %s Copied properties for revision %ld (%s* properties skipped). Copied properties for revision %ld. Copied: %s (from rev %ld, %s) Copy from mutable tree not currently supportedCopy source checksum mismatch on copy from '%s'@%ld to '%s' in rev based on r%ld: expected: %s actual: %s Copyfrom-url '%s' has different repository root than '%s'Copying from transactions not allowedCorrupt DB: faulty predecessor countCorrupt DB: initial copy id not '0' in filesystem '%s'Corrupt DB: initial revision number is not '0' in filesystem '%s'Corrupt DB: initial transaction id not '0' in filesystem '%s'Corrupt current fileCorrupt entry in 'copies' table for '%s' in filesystem '%s'Corrupt entry in 'transactions' table for '%s' in filesystem '%s'Corrupt filesystem revision %ld in filesystem '%s'Corrupt lock in 'locks' table for '%s' in filesystem '%s'Corrupt lockfile for path '%s' in filesystem '%s'Corrupt node-id in node-revCorruption detected whilst reading delta chain from representation '%s' to '%s'Could not create top-level directoryCould not fetch the Version Resource URL (needed during an import or when it is missing from the local, cached props)Could not find end of line in range list line in '%s'Could not get content-type from responseCould not initialize the SASL libraryCould not lookup hostname `%s'Could not obtain the list of SASL mechanismsCould not parse mergeinfo string '%s'Could not save fileCould not save the URL of the version resourceCould not use external editor to fetch log message; consider setting the $SVN_EDITOR environment variable or using the --message (-m) or --file (-F) optionsCould not write svndiff to temp fileCouldn't determine absolute path of '%s'Couldn't do property mergeCouldn't find a repositoryCouldn't obtain the authenticated usernameCouldn't open a repositoryCouldn't open logCreate a new directory under version control. usage: 1. mkdir PATH... 2. mkdir URL... Create version controlled directories. 1. Each directory specified by a working copy PATH is created locally and scheduled for addition upon the next commit. 2. Each directory specified by a URL is created in the repository via an immediate commit. In both cases, all the intermediate directories must already exist, unless the --parents option is given. Create an unversioned copy of a tree. usage: 1. export [-r REV] URL[@PEGREV] [PATH] 2. export [-r REV] PATH1[@PEGREV] [PATH2] 1. Exports a clean directory tree from the repository specified by URL, at revision REV if it is given, otherwise at HEAD, into PATH. If PATH is omitted, the last component of the URL is used for the local directory name. 2. Exports a clean directory tree from the working copy specified by PATH1, at revision REV if it is given, otherwise at WORKING, into PATH2. If PATH2 is omitted, the last component of the PATH1 is used for the local directory name. If REV is not specified, all local changes will be preserved. Files not under version control will not be copied. If specified, PEGREV determines in which revision the target is first looked up. Created: %s Creating DAV sandbox dirCreating authz fileCreating conf directoryCreating db lock fileCreating db logs lock fileCreating hook directoryCreating lock dirCreating passwd fileCreating post-commit hookCreating post-revprop-change hookCreating pre-commit hookCreating pre-revprop-change hookCreating start-commit hookCreating svnserve.conf fileCredential data unavailableCredentials not savedDAV request failed; it's possible that the repository's pre-revprop-change hook either failed or is non-existentData cannot be safely XML-escapedDecompression of svndiff data failedDefault entry has no revision numberDefault entry is missing URLDefault: '-u'. When Subversion is invoking an external diff program, ARG is simply passed along to the program. But when Subversion is using its default internal diff implementation, or when Subversion is displaying blame annotations, ARG could be any of the following: -u (--unified): Output 3 lines of unified context. -b (--ignore-space-change): Ignore changes in the amount of white space. -w (--ignore-all-space): Ignore all white space. --ignore-eol-style: Ignore changes in EOL styleDefault: '-u'. When Subversion is invoking an external diff program, ARG is simply passed along to the program. But when Subversion is using its default internal diff implementation, or when Subversion is displaying blame annotations, ARG could be any of the following: -u (--unified): Output 3 lines of unified context. -b (--ignore-space-change): Ignore changes in the amount of white space. -w (--ignore-all-space): Ignore all white space. --ignore-eol-style: Ignore changes in EOL style. -p (--show-c-function): Show C function name in diff output.Delete failed: directory has no entry '%s'DeletedDeleted: %s Deleted: %s%sDeleting %s Delta depth 'exclude' not supportedDelta does not contain enough new dataDelta does not fill the target windowDelta property block detected - not supported by svndumpfilterDeltifying revision %ld...Depth 'exclude' not supported for linkDepth: INVALID Depth: empty Depth: files Depth: immediates Describe the usage of this program or its subcommands. usage: help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svndumpfilter help [SUBCOMMAND...] Destination '%s' already existsDestination '%s' is not a directoryDestination HEAD (%ld) is not the last merged revision (%ld); have you committed to the destination without using svnsync?Destination URLs are brokenDestination directory exists, and will not be overwritten unless forcedDestination directory exists; please remove the directory or use --force to overwriteDestination directory of add-with-history is missing a URLDestination repository has not been initializedDestination repository is already synchronizing from '%s'Did not expect '%s' to be a working copy rootDidn't receive end marker for lock responsesDidn't receive end marker for unlock responsesDiff data source modified unexpectedlyDiff version inconsistencies in representation '%s'Directory '%s' containing working copy admin area is missingDirectory '%s' has no THIS_DIR entryDirectory '%s' has no URLDirectory '%s' is missingDirectory '%s' is out of dateDirectory '%s' is out of date; try updatingDirectory entry corruptDirectory needs to be empty but is notDirlist element not a listDisabled repository featureDisplay information about a local or remote item. usage: info [TARGET[@REV]...] Print information about each TARGET (default: '.'). TARGET may be either a working-copy path or URL. If specified, REV determines in which revision the target is first looked up. Display the differences between two revisions or paths. usage: 1. diff [-c M | -r N[:M]] [TARGET[@REV]...] 2. diff [-r N[:M]] --old=OLD-TGT[@OLDREV] [--new=NEW-TGT[@NEWREV]] \ [PATH...] 3. diff OLD-URL[@OLDREV] NEW-URL[@NEWREV] 1. Display the changes made to TARGETs as they are seen in REV between two revisions. TARGETs may be all working copy paths or all URLs. If TARGETs are working copy paths, N defaults to BASE and M to the working copy; if URLs, N must be specified and M defaults to HEAD. The '-c M' option is equivalent to '-r N:M' where N = M-1. Using '-c -M' does the reverse: '-r M:N' where N = M-1. 2. Display the differences between OLD-TGT as it was seen in OLDREV and NEW-TGT as it was seen in NEWREV. PATHs, if given, are relative to OLD-TGT and NEW-TGT and restrict the output to differences for those paths. OLD-TGT and NEW-TGT may be working copy paths or URL[@REV]. NEW-TGT defaults to OLD-TGT if not specified. -r N makes OLDREV default to N, -r N:M makes OLDREV default to N and NEWREV default to M. 3. Shorthand for 'svn diff --old=OLD-URL[@OLDREV] --new=NEW-URL[@NEWREV]' Use just 'svn diff' to display local modifications in a working copy. Do not display filtering statistics.Don't filter revision properties.Don't know anything about capability '%s'Don't know how to handle '%s' for capability '%s'Dump stream contains a malformed header (with no ':') at '%.20s'Dump stream contains a malformed header (with no value) at '%.20s'Dumpstream data appears to be malformedDuplicate something in working copy or repository, remembering history. usage: copy SRC[@REV]... DST When copying multiple sources, they will be added as children of DST, which must be a directory. SRC and DST can each be either a working copy (WC) path or URL: WC -> WC: copy and schedule for addition (with history) WC -> URL: immediately commit a copy of WC to URL URL -> WC: check out URL into WC, schedule for addition URL -> URL: complete server-side copy; used to branch and tag All the SRCs must be of the same type. WARNING: For compatibility with previous versions of Subversion, copies performed using two working copy paths (WC -> WC) will not contact the repository. As such, they may not, by default, be able to propagate merge tracking information from the source of the copy to the destination. Edit a property with an external editor. usage: 1. propedit PROPNAME TARGET... 2. propedit PROPNAME --revprop -r REV [TARGET] 1. Edits versioned prop in working copy or repository. 2. Edits unversioned remote prop on repos revision. TARGET only determines which repository to access. See 'svn help propset' for more on setting properties. Either a URL or versioned item is requiredEmpty error listEmpty noderev in cacheEnd revision %ld is invalid (youngest revision is %ld)Entry '%s' has illegal scheduleEntry '%s' has invalid '%s' valueEntry '%s' has invalid node kindEntry '%s' has no URLEntry '%s' has unexpectedly changed special statusEntry '%s' is already under version controlEntry already existsEntry contains non-canonical path '%s'Entry for '%s' exists (though the working file is missing)Entry for '%s' has invalid repository rootEntry for '%s' has no URLEntry for '%s' is marked as 'copied' but is not itself scheduled for addition. Perhaps you're committing a target that is inside an unversioned (or not-yet-versioned) directory?Entry has an invalid attributeEntry has no URLEntry has no revisionError aborting reportError at entry %d in entries file for '%s':Error bumping revisions post-commit (details follow):Error calling external programError closing directory '%s'Error closing filesystemError closing null fileError closing read end of stderr pipeError closing write end of stderr pipeError comparing '%s' and '%s'Error copying logfile; the DB_LOG_AUTOREMOVE feature may be interfering with the hotcopy algorithm. If the problem persists, try deactivating this feature in DB_CONFIGError during add of '%s'Error during recursive copy of '%s'Error getting 'affected time' for '%s'Error getting 'affected time' of '%s'Error getting 'affected time' on '%s'Error getting UID of processError getting file size on '%s'Error in child process: %sError in post-commit clean-up (details follow):Error initializing command line argumentsError modifying entry for '%s'Error modifying entry of '%s'Error normalizing edited contents to internal formatError normalizing log message to internal formatError opening db lockfileError parsing %s property on '%s': '%s'Error parsing '%s'Error parsing argumentsError parsing diff optionsError parsing memcache server '%s'Error parsing revision numberError processing command '%s' in '%s'Error reading changes for key '%s'Error reading spooled %s request responseError removing changelist from entry '%s'Error removing lock from entry for '%s'Error replacing text-base of '%s'Error resolving case of '%s'Error restoring text for '%s'Error retrieving REPORT (%d)Error retrieving replay REPORT (%d)Error running '%s': exitcode was %d, args were: in directory '%s', basenames: %s %s %sError running catastrophic recovery on hotcopy; the DB_LOG_AUTOREMOVE feature may be interfering with the hotcopy algorithm. If the problem persists, try deactivating this feature in DB_CONFIGError running editor.Error running editor; leaving all conflicts.Error running merge tool.Error running merge tool; leaving all conflicts.Error running post-commit hookError running post-lock hookError running post-unlock hookError setting property '%s': Error unlocking locked dirs (details follow):Error validating server certificate for '%s': Error waiting for process '%s'Error writing entries file for '%s'Error writing hash to '%s'Error writing log for '%s'Error writing stream: unexpected EOFError writing to '%s'Error writing to '%s': unexpected EOFExactly one file argument requiredExactly one property name and one file argument requiredExcluding (and dropping empty revisions for) prefixes: Excluding prefixes: Expected '%s' to be a directory but found a fileExpected '%s' to be a file but found a directoryExpected 'revprops', found '%s'Expected FS format '%d'; found format '%d'Expected FS format between '1' and '%d'; found format '%d'Expected a valid revnum and pathExpected current rev to be <= %ld but found %ldExpected repository format '%d' or '%d'; found format '%d'Expected valid revision rangeExpires: %s Explicit target argument requiredExplicit target required ('%s' interpreted as prop value)Export complete. Exported external at revision %ld. Exported revision %ld. External at revision %ld. External checkout complete. External export complete. External update complete. Failed to add directory '%s': a non-directory object of the same name already existsFailed to add directory '%s': a versioned directory of the same name already existsFailed to add directory '%s': an unversioned directory of the same name already existsFailed to add directory '%s': copyfrom arguments not yet supportedFailed to add directory '%s': object of the same name as the administrative directoryFailed to add file '%s': a non-file object of the same name already existsFailed to calculate MD5 digest for '%s'Failed to connect to Service Control ManagerFailed to create winservice_start_eventFailed to delete mmap '%s'Failed to execute WebDAV PROPPATCHFailed to fetch lock informationFailed to find label '%s' for URL '%s'Failed to find time on revision %ldFailed to get exclusive repository access; perhaps another process such as httpd, svnserve or svn has it open?Failed to get lock on destination repos, currently held by '%s' Failed to get new string keyFailed to load module for FS type '%s'Failed to load properties from diskFailed to locate 'copyfrom' path in working copyFailed to mark '%s' absent: item of the same name is already scheduled for additionFailed to parse URI '%s'Failed to revert '%s' -- try updating instead. Failed to run '%s' hook; broken symlinkFailed to start '%s' hookFailed to write full amount to streamFailed writing updated fileFailure loading pluginFailure opening '%s'Failure reading rep '%s'File '%s' already existsFile '%s' has binary mime type propertyFile '%s' has inconsistent newlinesFile '%s' has local modificationsFile '%s' in directory '%s' is not a versioned resourceFile '%s' is out of dateFile '%s' is out of date; try updatingFile already exists: filesystem '%s', revision %ld, path '%s'File already exists: filesystem '%s', transaction '%s', path '%s'File is not mutable: filesystem '%s', revision %ld, path '%s'File not found: revision %ld, path '%s'File not found: transaction '%s', path '%s'File or directory '%s' is out of date; try updatingFilesystem directory has no such entryFilesystem has no itemFilesystem has no such copyFilesystem has no such lockFilesystem has no such node origin recordFilesystem has no such node-rev-idFilesystem has no such representationFilesystem has no such stringFilesystem is already openFilesystem is corruptFilesystem is not openFilesystem object already openFilesystem object has not been opened yetFilesystem path '%s' is neither a file nor a directoryFilesystem upgrade is not supportedFilter out nodes with given prefixes from dumpstream. usage: svndumpfilter exclude PATH_PREFIX... Filter out nodes without given prefixes from dumpstream. usage: svndumpfilter include PATH_PREFIX... Final line in revision file longer than 64 charactersFinal line in revision file missing spaceFirst line of '%s' contains non-digitFirst revision cannot be higher than secondFormat file '%s' contains an unexpected non-digitFormat of an svn:externals property was invalidFound a working copy pathFound malformed header in revision fileFraming error in pipe protocolGET request failed: %d %sGeneral filesystem errorGot apply-textdelta element without preceding add-file or open-fileGot cdata content for a prop deleteGot close-directory element without ever opening a directoryGot close-file element without preceding add-file or open-fileGot source path but no source revision for '%s'Got unrecognized encoding '%s'HTTP Path Not FoundIllegal repository URL '%s'Illegal svn repository URL '%s'Illegal target for the requested operationImpossibly long repository root from serverImproper relative URL '%s'In directory '%s'Including (and dropping empty revisions for) prefixes: Including prefixes: Incompatible library versionIncomplete dataIncomplete lock data returnedIncomplete or unterminated property blockInconsistent line ending styleIncorrect arguments suppliedIncorrect parameters givenIndexInitialization of SSPI library failedInput/output errorInquiry about unknown capabilityInter-repository relocation not allowedInternal error: there is an unknown parent (%d) for the 'DAV:response' element within the MERGE responseInvalid %s property on '%s': target '%s' is an absolute path or involves '..'Invalid 'conflict_result' argumentInvalid 'format' attributeInvalid URL '%s'Invalid URL: illegal character in proxy port numberInvalid URL: negative proxy port numberInvalid URL: proxy port number greater than maximum TCP port number 65535Invalid argument '%s' in diff optionsInvalid authz configurationInvalid change kind in rev fileInvalid change ordering: new node revision ID without deleteInvalid change ordering: non-add change on deleted pathInvalid change typeInvalid changes line in rev-fileInvalid character '%c' found in range listInvalid character '%c' found in revision listInvalid config: illegal character in debug mask valueInvalid config: illegal character in timeout valueInvalid config: negative timeout valueInvalid config: unable to load PKCS#11 provider '%s'Invalid config: unable to load certificate file '%s'Invalid config: unknown HTTP library '%s'Invalid config: unknown http authtype '%s'Invalid configuration valueInvalid control character '0x%02x' in path '%s'Invalid copy source path '%s'Invalid creation date header value in response.Invalid depth (%c) for path '%s'Invalid diff stream: [new] insn %d overflows the new data sectionInvalid diff stream: [src] insn %d overflows the source viewInvalid diff stream: [tgt] insn %d starts beyond the target view positionInvalid diff stream: insn %d cannot be decodedInvalid diff stream: insn %d has non-positive lengthInvalid diff stream: insn %d overflows the target viewInvalid editor anchoring; at least one of the input paths is not a directory and there was no source entryInvalid end revision %ldInvalid entry terminatorInvalid escape sequenceInvalid escaped characterInvalid file or dir token during editInvalid filesystem path syntaxInvalid filesystem revision numberInvalid filesystem transaction nameInvalid length (%%%s) when about to read a stringInvalid lockInvalid operation on the current working directoryInvalid option. Invalid option; cannot choose based on conflicts for properties. Invalid option; cannot choose based on conflicts in a binary file. Invalid option; cannot display conflicts for a binary file. Invalid option; cannot display conflicts for properties. Invalid option; original files not available. Invalid option; there's no merged version to diff. Invalid option; there's no merged version to edit. Invalid prop-mod flag in rev-fileInvalid relocationInvalid report for top level of working copyInvalid revision number '%ld'Invalid revision number (%ld)Invalid revision number found parsing '%s'Invalid revision number suppliedInvalid revision specifierInvalid scheduleInvalid server response to dated-rev requestInvalid start revision %ldInvalid switchInvalid target pathInvalid text-mod flag in rev-fileInvalid timeout valueInvalid value (%%%s) for node revision mergeinfo countInvalid value for field '%s'Invalid version line in entries file of '%s'Item already exists in filesystemItem is not readableItem is not writableItem is out of dateItem is partially readableIteration terminated before completionKindless noderev in cacheLast Changed Author: %s Last Changed DateLast Changed Rev: %ld Left locally modified or unversioned filesLine endings other than expectedList all properties on files, dirs, or revisions. usage: 1. proplist [TARGET[@REV]...] 2. proplist --revprop -r REV [TARGET] 1. Lists versioned props. If specified, REV determines in which revision the target is first looked up. 2. Lists unversioned remote props on repos revision. TARGET only determines which repository to access. List directory entries in the repository. usage: list [TARGET[@REV]...] List each TARGET file and the contents of each TARGET directory as they exist in the repository. If TARGET is a working copy path, the corresponding repository URL will be used. If specified, REV determines in which revision the target is first looked up. The default TARGET is '.', meaning the repository URL of the current working directory. With --verbose, the following fields will be shown for each item: Revision number of the last commit Author of the last commit If locked, the letter 'O'. (Use 'svn info URL' to see details) Size (in bytes) Date and time of the last commit Local URL '%s' contains only a hostname, no pathLocal URL '%s' contains unsupported hostnameLocal URL '%s' does not contain 'file://' prefixLocal, non-commit operations do not take a log message or revision propertiesLocation entry not a listLocation segment entry not a listLockLock CreatedLock ExpiresLock Owner: %s Lock Token: %s Lock comment contains a zero byteLock comment contains illegal charactersLock comment file is a versioned file; use '--force-log' to overrideLock element not a listLock failed: newer version of '%s' existsLock file '%s' is not a regular fileLock has expiredLock request failed: %d %sLock response not a listLock token is incorrectLock working copy paths or URLs in the repository, so that no other user can commit changes to them. usage: lock TARGET... Use --force to steal the lock from another user or working copy. Log command for directory '%s' is mislocatedLog entry missing 'name' attribute (entry '%s' for directory '%s')Log entry not a listLog message contains a zero byteLog message file is a versioned file; use '--force-log' to overrideLog path entry not a stringLog revprop entry not a stringMD5 checksum is missingMIME type '%s' contains invalid character '%c'MIME type '%s' does not contain '/'MIME type '%s' has empty media typeMalformed URL for repositoryMalformed UUID '%s'Malformed XML: %s at line %ldMalformed copyfrom line in node-revMalformed copyroot line in node-revMalformed dumpfile headerMalformed dumpstream: Revision 0 must not contain node recordsMalformed error listMalformed fileMalformed network dataMalformed representation headerMalformed skeleton dataMalformed stream dataMalformed svndiff data in representationMalformed text rep offset line in node-revMerge conflict during commitMerge from foreign repository is not compatible with mergeinfo modificationMerge source requiredMerged via:Mergeinfo element is not a listMergeinfo for '%s' maps to an empty revision rangeMergeinfo parse errorMismatch popping the WC unwind stackMismatched FS module version for '%s': found %d.%d.%d%s, expected %d.%d.%d%sMismatched RA version for '%s': found %d.%d.%d%s, expected %d.%d.%d%sMissing 'dest' attribute in '%s'Missing 'left' attribute in '%s'Missing 'revision' attribute for '%s'Missing 'right' attribute in '%s'Missing 'timestamp' attribute in '%s'Missing changed-path information for '%s' in revision %ldMissing copyfrom-rev attr in add-directory elementMissing copyfrom-rev attr in add-file elementMissing cpath in node-revMissing default entryMissing end of line in wcprops file for '%s'Missing entry terminatorMissing id field in node-revMissing kind field in node-revMissing merge source path '%s'; try with --skip-missing-merge-sourcesMissing name attr in %s elementMissing name attr in absent-directory elementMissing name attr in absent-file elementMissing name attr in add-directory elementMissing name attr in add-file elementMissing name attr in delete-entry elementMissing name attr in open-directory elementMissing name attr in open-file elementMissing name attr in remove-prop elementMissing name attr in revprop elementMissing name attr in set-prop elementMissing node-id in node-revMissing path argumentMissing path attr in resource elementMissing propname and repository path argumentsMissing propname argumentMissing propname or repository path argumentMissing repository path argumentMissing required node revision IDMissing required revision specificationMissing rev attr in open-directory elementMissing rev attr in open-file elementMissing rev attr in target-revision elementMissing revisionMissing revision attr in delete-entry elementMissing revision attr in open-directory elementMissing revision attr in open-file elementMissing revision attr in open-root elementMissing revision attr in target-revision elementModifiedModified: %s Modified: %s%sModule for accessing a repository on local disk.Module for accessing a repository using the svn network protocol.Module for accessing a repository using the svn network protocol. - with Cyrus SASL authenticationModule for accessing a repository via WebDAV protocol using Neon.Module for accessing a repository via WebDAV protocol using serf.Module for working with a Berkeley DB repository.Module for working with a plain file (FSFS) repository.Move and/or rename something in working copy or repository. usage: move SRC... DST When moving multiple sources, they will be added as children of DST, which must be a directory. Note: this subcommand is equivalent to a 'copy' and 'delete'. Note: the --revision option has no use and is deprecated. SRC and DST can both be working copy (WC) paths or URLs: WC -> WC: move and schedule for addition (with history) URL -> URL: complete server-side rename. All the SRCs must be of the same type. Moves between the working copy and the repository are not supportedMoving a path from one changelist to anotherMultiple revision arguments encountered; can't specify -c twice, or both -c and -rMultiple revision arguments encountered; try '-r N:M' instead of '-r N -r M'Must specify host and port for memcache server '%s'Must specify the revision as a number, a date or 'HEAD' when operating on a revision propertyMutually exclusive arguments specifiedName does not refer to a filesystem directoryName does not refer to a filesystem fileName is not a single path componentName: %s Negative expiration date passed to svn_fs_lockNegative revision number found parsing '%s'Neon was unable to parse URL '%s'Network connection closed unexpectedlyNetwork read/write errorNetwork socket initialization failedNew entry name required when importing a fileNo '.' entry in: '%s'No auth file path availableNo authentication provider availableNo changes to property '%s' on '%s' No changes to property '%s' on revision %ld No commits in repositoryNo common parent found, unable to operate on disjoint argumentsNo copy with id '%s' in filesystem '%s'No created pathNo default entry in directory '%s'No editor found.No editor found; leaving all conflicts.No external editor availableNo external merge tool availableNo fetch_func supplied to update_editorNo lock on path '%s' in filesystem '%s'No lock token providedNo merge tool found. No merge tool found; leaving all conflicts.No part of path '%s' was found in repository HEADNo paths to unlock providedNo record in 'node-origins' table for node id '%s' in filesystem '%s'No such XML tag attributeNo such entry: '%s'No such representation '%s'No such revision %ldNo such revision %ld in filesystem '%s'No such transactionNo token given for path '%s' in filesystem '%s'No transaction named '%s' in filesystem '%s'No user associated with filesystemNo username is currently associated with filesystem '%s'No valid copyfrom revision in filtered streamNo valid revision range 'end' in filtered streamNo valid revision range 'start' in filtered streamNo versioned parent directoriesNo write-lock in '%s'Node Kind: directory Node Kind: file Node Kind: none Node Kind: unknown Node origin for '%s' exists in filesystem '%s' with a different value (%s) than what we were about to store (%s)Node origin for '%s' exists with a different value (%s) than what we were about to store (%s)Node-revision #'%s' claims to have mergeinfo but doesn'tNode-revision '%s' claims to have mergeinfo but doesn'tNode-revision '%s' claims to sit atop a tree containing mergeinfo but is not a directoryNode-revision '%s@%ld' claims to have mergeinfo but doesn'tNon-ASCII character (code %d) detected, and unable to convert to/from UTF-8Non-numeric change argument (%s) given to -cNon-numeric limit argument givenNon-string as part of file contentsNone of the environment variables SVN_EDITOR, VISUAL or EDITOR are set, and no 'editor-cmd' run-time configuration option was foundNot all required revisions are specifiedNot authorized to open root of edit operationNot enough arguments givenNot enough arguments providedNull rep, but offset past zero alreadyNumber is larger than maximumObject is not a revision rootObject is not a transaction rootObstructed updateOne or more conflicts were produced while merging r%ld:%ld into '%s' -- resolve all conflicts and rerun the merge to apply the remaining unmerged revisionsOnly diffs between a path's text-base and its working files are supported at this timeOnly one revision allowedOnly relative paths can be specified after a URLOperation does not apply to binary fileOperation does not apply to directoryOperation does not support multiple sourcesOption --tunnel-user is only valid in tunnel mode. Output the content of specified files or URLs with revision and author information in-line. usage: blame TARGET[@REV]... If specified, REV determines in which revision the target is first looked up. Output the content of specified files or URLs. usage: cat TARGET[@REV]... If specified, REV determines in which revision the target is first looked up. Owner: %s PIN for token "%s" in slot "%s"Passphrase for '%s': Password for '%s': Path '%s' already existsPath '%s' does not existPath '%s' does not exist in revision %ldPath '%s' doesn't exist in HEAD revisionPath '%s' doesn't exist in revision %ldPath '%s' ends in '%s', which is unsupported for this operationPath '%s' has no committed revisionPath '%s' is already locked by user '%s' in filesystem '%s'Path '%s' is no longer a member of a changelist. Path '%s' is not a URLPath '%s' is not a directoryPath '%s' is not a filePath '%s' is not in the working copyPath '%s' is now a member of changelist '%s'. Path '%s' isn't locked. Path '%s' must be an immediate child of the directory '%s'Path '%s' not found in head revisionPath '%s' not found in revision %ldPath '%s' not presentPath has no lock tokenPath is already lockedPath is not a stringPath is not a working copy directoryPath is not a working copy filePath is not an immediate child of the specified directoryPath is not lockedPath syntax not supported in this contextPath: %s Pathname not terminated by ':'Please type 'yes' or 'no': Premature EOF seen from serverPremature end of content data in dumpstreamProblem on first log entry in a working copyProblem running logProcess '%s' failed (exitwhy %d)Process '%s' returned error exitcode %dProp diffs element not a listProperties on '%s': Property '%s' is an entry propertyProperty '%s' is not a regular propertyProperty '%s' not found on path '%s' in revision %ldProperty '%s' not found on path '%s' in transaction %sProperty '%s' not found on revision %ldProperty not foundProplist element not a listProtocol error: the MERGE response for the '%s' resource did not return all of the properties that we asked for (and need to complete the commit)Protocol error: we told the server not to auto-merge any resources, but it said that '%s' was mergedPut files and directories under version control, scheduling them for addition to repository. They will be added in next commit. usage: add PATH... Python exception has been set with the errorQuerying mergeinfo requires version %d of the FSFS filesystem schema; filesystem '%s' uses only version %dRA layer didn't receive requested OPTIONS infoRA layer failed to create HTTP requestRA layer failed to fetch propertiesRA layer failed to init socket layerRA layer file already existsRA layer request failedREPORT response handling failed to complete the editor driveREVISION PATH -------- ---- REVISION PATH -------- --------- Ran out of unique namesRange list parsing ended before hitting newlineRead access denied for root of editRead error in pipeReading '%s'Reading from stdin is disallowedReading one svndiff window read beyond the end of the representationRecovery encountered a deltified directory representationRecovery encountered a non-directory nodeRecursively clean up the working copy, removing locks, resuming unfinished operations, etc. usage: cleanup [PATH...] Reference to non-existent node '%s' in filesystem '%s'Relative source revision %ld is not available in current repositoryRelocate can only change the repository part of an URLRemove 'conflicted' state on working copy files or directories. usage: resolved PATH... Note: this subcommand does not semantically resolve conflicts or remove conflict markers; it merely removes the conflict-related artifact files and allows PATH to be committed again. It has been deprecated in favor of running 'svn resolve --accept working'. Remove a property from files, dirs, or revisions. usage: 1. propdel PROPNAME [PATH...] 2. propdel PROPNAME --revprop -r REV [TARGET] 1. Removes versioned props in working copy. 2. Removes unversioned remote prop on repos revision. TARGET only determines which repository to access. Remove files and directories from version control. usage: 1. delete PATH... 2. delete URL... 1. Each item specified by a PATH is scheduled for deletion upon the next commit. Files, and directories that have not been committed, are immediately removed from the working copy unless the --keep-local option is given. PATHs that are, or contain, unversioned or modified items will not be removed unless the --force option is given. 2. Each item specified by a URL is deleted from the repository via an immediate commit. Remove revisions emptied by filtering.Removed lock on '%s'. Removing '%s' from changelist '%s'.Renumber revisions left after filtering.Rep '%s' both mutable and non-fulltextRep '%s' is not mutableRep contents are too large: got %s, limit is %sReplacing %s Repository Root: %s Repository URL required when importingRepository UUID '%s' doesn't match expected UUID '%s'Repository UUID does not match expected UUIDRepository UUID: %s Repository access is needed for this operationRepository access method not implementedRepository argument requiredRepository argument required Repository creation failedRepository has been movedRepository has no UUIDRepository has not been enabled to accept revision propchanges; ask the administrator to create a pre-revprop-change hookRepository lock acquired. Please wait; recovering the repository may take some time... Repository lock acquired. Please wait; upgrading the repository may take some time... Repository moved permanently to '%s'; please relocateRepository moved temporarily to '%s'; please relocateRepository upgrade is not supportedRepresentation is being writtenRepresentation is not of type 'delta'Request depth 'exclude' not supportedReserved directory name in command line argumentsResolved conflicted state of '%s' Restore pristine working copy file (undo most local edits). usage: revert PATH... Note: this subcommand does not require network access, and resolves any conflicted states. However, it does not restore removed directories. Restored '%s' Retrieval of mergeinfo unsupported by '%s'Reverted '%s' Revision %ld committed as %ld. Revision %ld doesn't match existing revision %ld in '%s'Revision %ld has a non-file where its revprops file should beRevision %ld has a revs file but no revprops fileRevision %ld skipped. Revision being currently copied (%ld), last merged revision (%ld), and destination HEAD (%ld) are inconsistent; have you committed to the destination without using svnsync?Revision entry not a listRevision file lacks trailing newlineRevision property '%s' not allowed in this contextRevision property pair is emptyRevision range is not allowedRevision type requires a working copy path, not a URLRevision: %ld Revisions must not be greater than the youngest revision (%ld)Revisions renumbered as follows: Revprop changeRoot object must be a transaction rootSQLite errorSSL is not supportedSafe data '%s' was followed by non-ASCII byte %d: unable to convert to/from UTF-8Schedule: add Schedule: delete Schedule: normal Schedule: replace Scope not allowed in memcache server '%s'Second revision requiredSelect: (p) postponeSelect: (p) postpone, (mf) mine-full, (tf) theirs-full, (h) help:Send changes from your working copy to the repository. usage: commit [PATH...] A log message must be provided, but it can be empty. If it is not given by a --message or --file option, an editor will be started. If any targets are (or contain) locked items, those will be unlocked after a successful commit. Sending %s Server SSL certificate untrustedServer can only replay from the root of a repositoryServer did not send repository rootServer does not support custom revprops via logServer does not support date-based operationsServer does not support edit pipeliningServer does not support locking featuresServer does not support retrieving information about the repository rootServer doesn't support setting arbitrary revision properties during commitServer doesn't support the get-lock commandServer doesn't support the lock commandServer doesn't support the replay commandServer doesn't support the replay-range commandServer doesn't support the unlock commandServer only supports versions up to %dServer requires minimum version %dServer response missing the expected deadprop-count propertyServer sent unexpected return value (%d %s) in response to %s request for '%s'Session is rooted at '%s' but the repos root is '%s'Set new value for property '%s' on '%s' Set new value for property '%s' on revision %ld Setting property '%s' on non-local target '%s' is not supportedSetting property on non-local target '%s' needs a base revisionSetting property recursively on non-local target '%s' is not supportedSize of uncompressed data does not match stored original lengthSkip missing merge sources.Skipped '%s' Skipped missing target: '%s' Skipping binary file: '%s' Something is wrong with the log message's contentsSorry, svn_client_diff4 was called in a way that is not yet supportedSource '%s' is not a directorySource URL '%s' is from foreign repository; leaving it as a disjoint WCSource and dest appear not to be in the same repository (src: '%s'; dst: '%s')Source url '%s' is from different repositorySpecial code for wrapping server errors to report to clientStandard properties can't be set explicitly as revision propertiesStart revision %ld is greater than end revision %ldStart revision must precede end revisionStatus against revision: %6ld Storage of non-regular property '%s' is disallowed through the repository interface, and could indicate a bug in your clientStore password unencrypted (yes/no)? String does not represent a node or node-rev-idString length larger than maximumSubcommand '%s' doesn't accept option '%s' Type 'svn help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnadmin help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svndumpfilter help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnlook help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnsync help %s' for usage. Subcommand argument required Subversion is a tool for version control. For additional information, see http://subversion.tigris.org/ Successful edit status returned too soonSuccessor id '%s' (for '%s') already exists in filesystem '%s'Sum of subblock sizes larger than total block content lengthSummarizing diff can only compare repository to repositorySvndiff compressed data is invalidSvndiff contains corrupt window headerSvndiff data contains backward-sliding source viewSvndiff data contains corrupt windowSvndiff data contains invalid instructionSvndiff data ends unexpectedlySvndiff data has invalid headerSvndiff has backwards-sliding source viewsSvndiff has invalid headerSvndiff source length inconsistencySymbolic links are not supported on this platformSyntax error in native-eol argument '%s'Syntax error in revision argument '%s'Syntax error parsing revision '%s'Target lists to diff may not contain both working copy paths and URLsTest failedTest skippedText Last UpdatedText delta chunk not a stringThe %s request returned invalid XML in the response: %s (%s)The '%s' feature requires version %d of the filesystem schema; filesystem '%s' uses only version %dThe CHECKOUT response did not contain a 'Location:' headerThe EDITOR, SVN_EDITOR or VISUAL environment variable or 'editor-cmd' run-time configuration option is empty or consists solely of whitespace. Expected a shell command.The MERGE property response had an error statusThe OPTIONS response did not include the requested activity-collection-set valueThe OPTIONS response did not include the requested activity-collection-set; this often means that the URL is not WebDAV-enabledThe OPTIONS response did not include the requested baseline-collection valueThe OPTIONS response did not include the requested checked-in valueThe OPTIONS response did not include the requested resourcetype valueThe OPTIONS response did not include the requested version-controlled-configuration valueThe OPTIONS response did not include the requested version-name valueThe PROPFIND response did not include the requested resourcetype valueThe SVN_MERGE environment variable is empty or consists solely of whitespace. Expected a shell command. The URL '%s' has a different repository root than its parentThe UUID property was not found on the resource or any of its parentsThe VCC property was not found on the resourceThe environment variable SVN_MERGE and the merge-tool-cmd run-time configuration option were not set. The file '%s' changed unexpectedly during diffThe file-revs report didn't contain any revisionsThe following repository access (RA) modules are available: The following repository back-end (FS) modules are available: The generated transaction name is too longThe get-file-revs command didn't return any revisionsThe latest repos revision is %ld. The location for '%s' for revision %ld does not exist in the repository or refers to an unrelated objectThe lock comment is a pathname (was -F intended?); use '--force-log' to overrideThe log message file is under version controlThe log message is a pathnameThe log message is a pathname (was -F intended?); use '--force-log' to overrideThe operation was interruptedThe path was not part of a repositoryThe relative-path property was not found on the resourceThe repository at '%s' has uuid '%s', but the WC has '%s'The repository is locked, perhaps for db recoveryThe request response contained at least one errorThe response contains a non-conforming HTTP status lineThe root directory cannot be deletedThe service failed to startThe service failed to start; an internal error occurred while starting the serviceThe specified diff option is not supportedThe specified transaction is not mutableThere is already a versioned item '%s'There is no change 0They want to change the property value to '%s', you want to delete the property. They want to delete the property, you want to change the value to '%s'. This client is too old to work with working copy '%s'. You need to get a newer Subversion client, or to downgrade this working copy. See http://subversion.tigris.org/faq.html#working-copy-format-change for details.This is an empty revision for padding.To turn off the %s property, use 'svn propdel'; setting the property to '%s' will not turn it off.Token '%s' does not point to any existing lock in filesystem '%s'Too many arguments givenToo many arguments to import commandToo many nested itemsTransaction '%s' is not based on a revision; how oddTransaction '%s' out-of-date with respect to revision '%s'Transaction '%s' removed. Transaction aborted, but cleanup failedTransaction cleanup failedTransaction is deadTransaction is dead: '%s'Transaction is not deadTransaction is not dead: '%s'Transaction is out of dateTransaction out of dateTransmitting file data Traversal of '%s' found no ambient depthTried a versioning operation on an unversioned resourceTried to change an immutable representationTry 'svn add' or 'svn add --non-recursive' instead?Try 'svn help' for more infoTry 'svn mkdir --parents' instead?Try 'svn revert --depth infinity' instead?Try 'svnadmin help' for more infoTry 'svndumpfilter help' for more infoTry 'svnlook help' for more infoTry 'svnsync help' for more infoTrying to add new property '%s' with value '%s', but property already exists with value '%s'.Trying to change property '%s' from '%s' to '%s', but it has been locally deleted.Trying to change property '%s' from '%s' to '%s', but property already exists with value '%s'.Trying to change property '%s' from '%s' to '%s', but property has been locally added with value '%s'.Trying to change property '%s' from '%s' to '%s', but the property does not exist.Trying to create property '%s' with value '%s', but it has been locally deleted.Trying to delete property '%s' with value '%s' but it has been modified from '%s' to '%s'.Trying to delete property '%s' with value '%s' but the local value is '%s'.Trying to use an unsupported featureTunnel scheme %s requires environment variable %s to be definedTwo top-level reports with no targetTwo versioned resources are unrelatedType '%s --help' for usage. Type '%s help' for usage. Type 'svnversion --help' for usage. URL '%s' contains a '..' elementURL '%s' does not begin with a schemeURL '%s' doesn't existURL '%s' doesn't match existing URL '%s' in '%s'URL '%s' is not a child of repository root URL '%s'URL '%s' is not a child of the session's repository root URL '%s'URL '%s' is not properly URI-encodedURL '%s' non-existent in revision %ldURL '%s' non-existent in that revisionURL '%s' refers to a directoryURL '%s' refers to a file, not a directoryURL has no scheme: '%s'URL: %s URLs have no scheme ('%s' and '%s')UUID Token: %s Unable to check path existence for '%s'Unable to create transaction directory in '%s' for revision %ldUnable to extract data from response headerUnable to find repository location for '%s' in revision %ldUnable to locate auth fileUnable to lock '%s'Unable to lock/unlock across multiple repositoriesUnable to make any directoriesUnable to make name for '%s'Unable to open an ra_local session to URLUnable to open auth file for readingUnable to open auth file for writingUnable to open repository '%s'Unable to open root of editUnable to parse URL '%s'Unable to parse reversed revision range '%ld-%ld'Unable to parse revision range '%ld-%ld' with same start and end revisionsUndefined tunnel scheme '%s'Unexpected EOF on streamUnexpected EOF writing contentsUnexpected end of entryUnexpected end of svndiff inputUnexpected immutable node at '%s'Unexpected node kind %d for '%s'Unexpected node kind foundUnexpected or unknown property kindUnexpected server response to authenticationUnexpectedly found '%s': path is marked 'missing'Unknown FS typeUnknown FS type '%s'Unknown XML encoding: '%s'Unknown authorization methodUnknown changelistUnknown command '%s'Unknown command: '%s' Unknown entry kind for '%s'Unknown error adding server to memcacheUnknown error creating apr_memcache_tUnknown error creating memcache serverUnknown hostname '%s'Unknown kind for noderev in cache: '%c'Unknown memcached error while readingUnknown memcached error while writingUnknown node kind for '%s'Unknown node kind for representation '%s'Unknown node type in cache: '%c'Unknown or unexpected kind for path '%s'Unknown or unversionable type for '%s'Unknown revprop word '%s' in log commandUnknown status '%s' in command responseUnknown status for lock commandUnknown status for unlock commandUnknown svn protocol commandUnknown svn_node_kindUnlockUnlock request failed: %d %sUnlock response not a listUnlock succeeded, but post-unlock hook failedUnlock working copy paths or URLs. usage: unlock TARGET... Use --force to break the lock. Unmergeable scheduling requested on an entryUnreadable path encountered; access deniedUnrecognized URL scheme '%s'Unrecognized URL scheme for '%s'Unrecognized binary data encoding; can't decodeUnrecognized line ending styleUnrecognized line ending style for '%s'Unrecognized logfile element '%s' in '%s'Unrecognized node kind: '%s'Unrecognized node-action on node '%s'Unrecognized record type in streamUnrecognized revision type requested for '%s'Unrecognized stream dataUnspecified error messageUnsupported FS formatUnsupported FS loader version (%d) for bdbUnsupported FS loader version (%d) for fsfsUnsupported RA loader version (%d) for ra_localUnsupported RA loader version (%d) for ra_neonUnsupported RA loader version (%d) for ra_serfUnsupported RA loader version (%d) for ra_svnUnsupported RA plugin ABI versionUnsupported dumpfile version: %dUnsupported node kind for path '%s'Unsupported report depth '%s'Unsupported repository versionUnsupported working copy formatUnterminated ID in cacheUnversioned properties on revision %ld: Update complete. Updated external to revision %ld. Updated to revision %ld. Upgrade of this repository is not supported; consider dumping and loading the data elsewhereUpgrade of this repository's underlying versioned filesystem is not supported; consider dumping and loading the data elsewhereUse --force to override this restrictionUse of two URLs is not compatible with mergeinfo modificationUser %s does not own lock on path '%s' (currently locked by %s)User '%s' is trying to use a lock owned by '%s' in filesystem '%s'Username does not match lock ownerUsername: Valid UTF-8 data (hex:%s) followed by invalid UTF-8 sequence (hex:%s)Value will not be set unless forcedVersion file format not correctVersion mismatch in '%s': found %d.%d.%d%s, expected %d.%d.%d%sWARNING: Referencing data in revision %ld, which is older than the oldest WARNING: dumped revision (%ld). Loading this dump into an empty repository WARNING: will fail. Waiting on repository lock; perhaps another process has it open? When specifying working copy paths, only one target may be givenWhile preparing '%s' for commitWindows service mode (Service Control Manager)Working copy '%s' is not lockedWorking copy '%s' lockedWorking copy and merge source not ready for reintegrationWorking copy format of '%s' is too old (%d); please check out your working copy againWorking copy is corruptWorking copy is not up-to-dateWorking copy not locked; this is probably a bug, please reportWorking copy path '%s' does not exist in repositoryWorking copy text base is corruptWrite denied: not authorized to read all of revision %ldWrite errorWrite-lock stolen in '%s'Wrong number of targets specifiedWrong or unexpected property valueXML data was not well-formedXML parser failed in '%s'You must specify exactly one of -d, -i, -t or -X. You must specify exactly one of -d, -i, -t, --service or -X. Your .svn/tmp directory may be missing or corrupt; run 'svn cleanup' and try againYour commit message was left in a temporary file:[Error output could not be read.][Error output could not be translated from the native locale to UTF-8.]add intermediate parentsallocating new copy ID (getting 'next-key')allocating new node ID (getting 'next-key')allocating new representation (getting next-key)apr memcache library not availableauthorization failedauthorization failed: %sbe verboseblame of the WORKING revision is not supportedbumping next copy keybumping next node ID keybumping next representation keybypass the repository hook systemcall hook after changing revision propertycall hook before changing revision propertycall post-commit hook after committing revisionscall pre-commit hook before committing revisionscannot assign with 'with-revprop' option (drop the '=')closing changes cursorconnect to source repository with password ARGconnect to source repository with username ARGconnect to sync repository with password ARGconnect to sync repository with username ARGcould not connect to servercreating changecreating cursor for reading a stringcreating cursor for reading changesdaemon modedeleting changesdeleting entry from 'copies' tabledeleting entry from 'nodes' tabledeleting representationdescend recursively, same as --depth=infinitydisable automatic log file removal [Berkeley DB]disable automatic propertiesdisable fsync at transaction commit [Berkeley DB]display this helpdisplay update informationdisregard default and svn:ignore property ignoresdo no interactive promptingdo not cache authentication tokensdo not cross copies while traversing historydo not output the trailing newlinedo not print differences for added filesdo not print differences for deleted filesdon't delete changelists after commitdon't unlock the targetsdone. dump incrementallyenable automatic propertiesexported%sfetching changesforce operation to runforce read only, overriding repository config fileforce validity of lock comment sourceforce validity of log message sourcegeneral usage: svnadmin SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...] Type 'svnadmin help ' for help on a specific subcommand. Type 'svnadmin --version' to see the program version and FS modules. Available subcommands: general usage: svndumpfilter SUBCOMMAND [ARGS & OPTIONS ...] Type 'svndumpfilter help ' for help on a specific subcommand. Type 'svndumpfilter --version' to see the program version. Available subcommands: general usage: svnlook SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...] Note: any subcommand which takes the '--revision' and '--transaction' options will, if invoked without one of those options, act on the repository's youngest revision. Type 'svnlook help ' for help on a specific subcommand. Type 'svnlook --version' to see the program version and FS modules. Available subcommands: general usage: svnsync SUBCOMMAND DEST_URL [ARGS & OPTIONS ...] Type 'svnsync help ' for help on a specific subcommand. Type 'svnsync --version' to see the program version and RA modules. Available subcommands: get repository uuidgive output suitable for concatenationignore ancestry when calculating mergesignore any repos UUID found in the streamignore externals definitionsinetd modeinvalid 'accept' ARGkeep path in working copylast changed rather than current revisionslimit operation by depth ARG ('empty', 'files', 'immediates', or 'infinity')listen hostname or IP address [mode: daemon, listen-once]listen hostname or IP address [mode: daemon, service, listen-once]listen port [mode: daemon, listen-once]listen port [mode: daemon, service, listen-once]listen-once mode (useful for debugging)load at specified directory in repositorylump-merge all of source URL's unmerged changesmake intermediate directoriesmark revisions as merged (use with -r)maximum number of history entriesmaximum number of log entriesmissing --accept optionnext-id file corruptnono progress (only errors) to stderrnotice ancestry when calculating differencesobsolete; try --depth=files or --depth=immediatesoperate on a revision property (use with -r or -t)operate on a revision property (use with -r)operate on single directory onlyoperate only on members of changelist ARG [aliases: --cl]output in XMLpass contents of file ARG as additional argsprint as little as possibleprint differences against the copy sourceprint extra informationprint nothing, or only summary informationproperty '%s' deleted from '%s'. property '%s' deleted from repository revision %ld property '%s' set on '%s' property '%s' set on repository revision %ld read configuration from file ARGread lock comment from file ARGread log message from file ARGread property value from file ARGread user configuration files from directory ARGreading copyreading filesystem revisionreading node revisionreading representationrelocate via URL-rewritingremove changelist associationremove redundant Berkeley DB log files from source repository [Berkeley DB]retrieve all revision propertiesretrieve revision property ARGrevprop '%s' in r%ld has unexpected value in repository (maybe someone else changed it?)revprop '%s' in r%ld is unexpectedly absent in repository (maybe someone else deleted it?)revprop '%s' in r%ld is unexpectedly present in repository (maybe someone else set it?)root of directory to serverun in foreground (useful for debugging) [mode: daemon]set repos UUID to that found in stream, if anyset repository uuidset revision property ARG in new revision using the name[=value] formatshow a summary of the resultsshow details for copiesshow full paths instead of indenting themshow help on a subcommandshow node revision ids for each pathshow program version informationspecify a password ARGspecify a password ARG (deprecated; see --source-password and --sync-password)specify a username ARGspecify a username ARG (deprecated; see --source-username and --sync-username)specify lock comment ARGspecify log message ARGspecify revision number ARGspecify revision number ARG (or X:Y range)specify transaction name ARGspecify which collection of revisions to display ('merged', 'eligible')storing copy recordstoring node revisionstoring node-origins recordstoring representationstoring transaction recordsubcommand argument required svn: run 'svn cleanup' to remove locks (type 'svn help cleanup' for details) svndiff data requested non-existent sourcesvndiff requested position beyond end of streamsvndiff window length is corruptsvnserve log filesvnserve: Root path '%s' does not exist or is not a directory. svnserve: The --service flag is only valid if the process is started by the Service Control Manager. system('%s') returned %dthe change made by revision ARG (like -r ARG-1:ARG) If ARG is negative this is like -r ARG:ARG-1timed out waiting for servertreat value as being in charset encoding ARGtry operation but make no changestunnel modetunnel username (default is current uid's name) [mode: tunnel]type of repository: 'fsfs' (default) or 'bdb'unknownunknown capability '%s'usage: svn [options] [args] Subversion command-line client, version %s. Type 'svn help ' for help on a specific subcommand. Type 'svn --version' to see the program version and RA modules or 'svn --version --quiet' to see just the version number. Most subcommands take file and/or directory arguments, recursing on the directories. If no arguments are supplied to such a command, it recurses on the current directory (inclusive) by default. Available subcommands: usage: svnadmin crashtest REPOS_PATH Open the repository at REPOS_PATH, then abort, thus simulating a process that crashes while holding an open repository handle. usage: svnadmin create REPOS_PATH Create a new, empty repository at REPOS_PATH. usage: svnadmin deltify [-r LOWER[:UPPER]] REPOS_PATH Run over the requested revision range, performing predecessor delti- fication on the paths changed in those revisions. Deltification in essence compresses the repository by only storing the differences or delta from the preceding revision. If no revisions are specified, this will simply deltify the HEAD revision. usage: svnadmin help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnadmin hotcopy REPOS_PATH NEW_REPOS_PATH Makes a hot copy of a repository. usage: svnadmin list-dblogs REPOS_PATH List all Berkeley DB log files. WARNING: Modifying or deleting logfiles which are still in use will cause your repository to be corrupted. usage: svnadmin list-unused-dblogs REPOS_PATH List unused Berkeley DB log files. usage: svnadmin load REPOS_PATH Read a 'dumpfile'-formatted stream from stdin, committing new revisions into the repository's filesystem. If the repository was previously empty, its UUID will, by default, be changed to the one specified in the stream. Progress feedback is sent to stdout. usage: svnadmin lslocks REPOS_PATH [PATH-IN-REPOS] Print descriptions of all locks on or under PATH-IN-REPOS (which, if not provided, is the root of the repository). usage: svnadmin lstxns REPOS_PATH Print the names of all uncommitted transactions. usage: svnadmin recover REPOS_PATH Run the recovery procedure on a repository. Do this if you've been getting errors indicating that recovery ought to be run. Berkeley DB recovery requires exclusive access and will exit if the repository is in use by another process. usage: svnadmin rmlocks REPOS_PATH LOCKED_PATH... Unconditionally remove lock from each LOCKED_PATH. usage: svnadmin rmtxns REPOS_PATH TXN_NAME... Delete the named transaction(s). usage: svnadmin setlog REPOS_PATH -r REVISION FILE Set the log-message on revision REVISION to the contents of FILE. Use --bypass-hooks to avoid triggering the revision-property-related hooks (for example, if you do not want an email notification sent from your post-revprop-change hook, or because the modification of revision properties has not been enabled in the pre-revprop-change hook). NOTE: Revision properties are not versioned, so this command will overwrite the previous log message. usage: svnadmin setrevprop REPOS_PATH -r REVISION NAME FILE Set the property NAME on revision REVISION to the contents of FILE. Use --use-pre-revprop-change-hook/--use-post-revprop-change-hook to trigger the revision property-related hooks (for example, if you want an email notification sent from your post-revprop-change hook). NOTE: Revision properties are not versioned, so this command will overwrite the previous value of the property. usage: svnadmin setuuid REPOS_PATH [NEW_UUID] Reset the repository UUID for the repository located at REPOS_PATH. If NEW_UUID is provided, use that as the new repository UUID; otherwise, generate a brand new UUID for the repository. usage: svnadmin upgrade REPOS_PATH Upgrade the repository located at REPOS_PATH to the latest supported schema version. This functionality is provided as a convenience for repository administrators who wish to make use of new Subversion functionality without having to undertake a potentially costly full repository dump and load operation. As such, the upgrade performs only the minimum amount of work needed to accomplish this while still maintaining the integrity of the repository. It does not guarantee the most optimized repository state as a dump and subsequent load would. usage: svnadmin verify REPOS_PATH Verifies the data stored in the repository. usage: svnlook author REPOS_PATH Print the author. usage: svnlook cat REPOS_PATH FILE_PATH Print the contents of a file. Leading '/' on FILE_PATH is optional. usage: svnlook changed REPOS_PATH Print the paths that were changed. usage: svnlook date REPOS_PATH Print the datestamp. usage: svnlook diff REPOS_PATH Print GNU-style diffs of changed files and properties. usage: svnlook dirs-changed REPOS_PATH Print the directories that were themselves changed (property edits) or whose file children were changed. usage: svnlook help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnlook history REPOS_PATH [PATH_IN_REPOS] Print information about the history of a path in the repository (or the root directory if no path is supplied). usage: svnlook info REPOS_PATH Print the author, datestamp, log message size, and log message. usage: svnlook lock REPOS_PATH PATH_IN_REPOS If a lock exists on a path in the repository, describe it. usage: svnlook log REPOS_PATH Print the log message. usage: svnlook tree REPOS_PATH [PATH_IN_REPOS] Print the tree, starting at PATH_IN_REPOS (if supplied, at the root of the tree otherwise), optionally showing node revision ids. usage: svnlook uuid REPOS_PATH Print the repository's UUID. usage: svnlook youngest REPOS_PATH Print the youngest revision number. usage: svnserve [-d | -i | -t | -X | --service] [options] Valid options: usage: svnserve [-d | -i | -t | -X] [options] Valid options: usage: svnsync copy-revprops DEST_URL [REV[:REV2]] Copy the revision properties in a given range of revisions to the destination from the source with which it was initialized. If REV and REV2 are provided, copy properties for the revisions specified by that range, inclusively. If only REV is provided, copy properties for that revision alone. If REV is not provided, copy properties for all revisions previously transferred to the destination. REV and REV2 must be revisions which were previously transferred to the destination. You may use "HEAD" for either revision to mean "the last revision transferred". usage: svnsync help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnsync synchronize DEST_URL Transfer all pending revisions to the destination from the source with which it was initialized. usage: svnversion [OPTIONS] [WC_PATH [TRAIL_URL]] Produce a compact 'version number' for the working copy path WC_PATH. TRAIL_URL is the trailing portion of the URL used to determine if WC_PATH itself is switched (detection of switches within WC_PATH does not rely on TRAIL_URL). The version number is written to standard output. For example: $ svnversion . /repos/svn/trunk 4168 The version number will be a single number if the working copy is single revision, unmodified, not switched and with an URL that matches the TRAIL_URL argument. If the working copy is unusual the version number will be more complex: 4123:4168 mixed revision working copy 4168M modified working copy 4123S switched working copy 4123P partial working copy, from a sparse checkout 4123:4168MS mixed revision, modified, switched working copy If invoked on a directory that is not a working copy, an exported directory say, the program will output 'exported'. If invoked without arguments WC_PATH will be the current directory. Valid options: use ARG as diff commanduse ARG as external editoruse ARG as merge commanduse ARG as the newer targetuse ARG as the older targetuse a different EOL marker than the standard system marker for files with the svn:eol-style property set to 'native'. ARG may be one of 'LF', 'CR', 'CRLF'use deltas in dump outputuse format compatible with Subversion versions earlier than 1.4use format compatible with Subversion versions earlier than 1.5use strict semanticsuse threads instead of fork [mode: daemon]use/display additional information from merge historywait instead of exit if the repository is in use by another processwrite server process ID to file ARG [mode: daemon, listen-once, service]write server process ID to file ARG [mode: daemon, listen-once]yesProject-Id-Version: subversion 1.6 Report-Msgid-Bugs-To: dev@subversion.tigris.org POT-Creation-Date: 2009-03-17 14:50+0100 PO-Revision-Date: 2007-10-28 01:23+0900 Last-Translator: Subversion Developers Language-Team: Japanese MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 編集 (e) - マージされたファイルにエディタで変更を加えます 全差分 (df) - マージによってファイルに加えられた変更をすべて表示します 解決版 (r) - マージされたバージョンのファイルを採用します 衝突表示 (dc) - (マージされたバージョンを無視して) 衝突をすべて表示します 衝突自分 (mc) - (同上) すべての衝突に関して自分のバージョンを採用します 衝突他人 (tc) - (同上) すべての衝突に関して他人のバージョンを採用します 完全自分 (mf) - (衝突がなくても) ファイル全体で自分のバージョンを採用します 完全他人 (tf) - (同上) ファイル全体で他人のバージョンを採用します 延期 (p) - 競合に、後で解決する予定であるという印をつけます 起動 (l) - 競合を解決するために外部ツールを起動します 全表示 (s) - この選択肢一覧を表示します --- 変更リスト '%s': ------- 新しいリビジョン %ld を (オリジナルのリビジョン %ld からロードして) コミットしました >>> ------- リビジョン %ld をコミットしました >>> リビジョン %ld をコミットしました。 Cyrus SASL 認証が利用可能です。 プレフィックスが与えられていません。 外部項目を '%s' に取得しています グローバルオプション: ログメッセージの変更や指定がなされていません 中断 (a), 続行 (c), 編集 (e): 外部項目 '%s' の状態表示を行っています。 復旧が終わりました。 アップグレードが終わりました。 有効なオプション: 警告: %s * パスを追加しています : %s ... * パスを削除しています : %s ... * パスを編集しています : %s ... * パスを置換しています : %s ... %ld => (取り除かれました) %s:r%s をマージしました%s 逆マージされた %s:r%s%s 延期 (p) - 競合に、後で解決する予定であるという印をつけます 完全自分 (mf) - (入ってくる項目の追加は無視して) 既存の項目を採用します 完全他人 (tf) - (既存の項目を上書きして) 入ってくる項目を採用します ヘルプ (h) - このヘルプを表示します - '%s' スキームを操作します (%a, %d %b %Y) (%s:%ld より) - 証明書に未知のエラーが起きました。 - 証明書の期限が切れています。 - 証明書のホスト名が一致しません。 - 証明書は信頼のおける機関が発行したものではありません。証明書を手動で認証 するためにフィンガープリントを用いてください! - 証明書がまだ有効ではありません。 完了しました。 。出力はありません。。出力: "%s": 未知のコマンドです。 %b %d %Y%b %d %H:%M%s (リビジョン %ld)%s (作業コピー)%sが %s フックによって妨げられました (終了コード: %d)%sフックが失敗しました (終了コード: %d)%s (URL: '%s')%s '%s': %d %s (%s://%s)%s, バージョン %s コンパイル日時: %s, %s %s: (有効な URL ではありません) %s: (バージョン管理されていないリソースです) %s属性に変更があったパス: %s%s%s警告: %s '%s' と '%s' は同じリポジトリではありません'%s' は既に存在します'%s' が既に存在しており、妨害しています'%s' は既に存在します。そしてディレクトリではありません'%s' に含まれている '%s' は、ファイルシステム形式のオプションとして不正です'%s' は URL ではないようです'%s' は作業コピーのパスではないようです'%s' は '%s()' を定義しません'%s' は存在しません'%s' がリビジョン %ld に存在しません'%s' に該当する URL は存在しません'%s' は末尾に予約されたパス名がついています'%s' は存在します。そして空ではありません'%s' は存在します。そしてディレクトリではありません'%s' には認識できないノード種別があります'%s' にはローカルで修正が加えられています'%s' はロックトークンを持っていますが、ロック所有者ではありません'%s' に URL がありません'%s' には系統情報がありません'%s' フックが失敗しました (まともなかたちで終了しませんでした: apr_exit_why_e は %d で、終了コードは %d でした)。'%s' フックは成功しましたが、エラー出力を読み込めませんでした'%s' (リビジョン %ld) は無関係のオブジェクトです'%s' は URL です。そこはパスで指定するべきです '%s' は URL です。しかし URL はコミットの対象ではありません'%s' は URL です。おそらくそこはパスで指定するべきです'%s' はディレクトリです。そのため変更リストに含めることはできません'%s' は予約されたパス名です。インポートはできません'%s' は作業コピーの属性なので、クライアントへのアクセスはできません'%s' は既に、異なる URL にあるリポジトリ用の作業コピーとなっています'%s' は既にバージョン管理下におかれています'%s' は URL です。そこはパスで指定するべきです'%s' は、現実にバージョン管理下にあるリソースを妨害しています'%s' には「欠如」マークがついているので追加準備できません'%s' はファイル名でもディレクトリ名でもありません'%s' は URL ではありません'%s' はディレクトリではありません'%s' はファイルシステム '%s' 内のディレクトリではありません'%s' はファイルではありません'%s' はファイルシステム '%s' 内のファイルではありません'%s' はリビジョン %ld ではファイルではありません'%s' はファイルでもディレクトリでもありません'%s' は --accept に指定する値として不正です'%s' は --show-revs に指定する値として不正です'%s' は行末 (EOL) の値として不正です'%s' は、Subversion の属性名として有効ではありません'%s' は、管理用ディレクトリ名として有効ではありません'%s' は深さとして有効ではありません。'empty'、'files'、'immediates'、'infinity' のいずれかを試してみてください'%s' はリビジョン範囲として有効ではありません'%s' は作業コピーではありません'%s' は作業コピーのディレクトリではありません'%s' はロックされていません'%s' はリポジトリでロックされていません'%s' はこの作業コピーでロックされていません'%s' はリポジトリのルートではありません'%s' はバージョン管理下におかれていません'%s' はバージョン管理下になく、コミットされる対象でもありません。しかし、その子ノード '%s' はコミットされる対象となっています'%s' を、バージョン管理下にない親ディレクトリの下に追加準備しようとしました'%s' は追加準備状態となっていますが、存在しません'%s' は '%s' と同じリポジトリにありません'%s' はユーザ '%s' にロックされました。 '%s' は '%s' と同じリポジトリになければなりません'%s' が見つかりません'%s' はファイルシステムに見つかりません'%s' はバージョン管理下になく、エクスポートされたものでもありません パス '%s' が見つかりません'%s' はディレクトリを指しています'%s' が %d を返しました'%s' から '%s' への参照リポジトリの変更は適切でありません'%s' のロックは解除されました。 '%s' は、リポジトリのリビジョン %ld には見つかりませんでした'%s' はベースラインのリソースには存在しませんでした'%s' はリソースに存在しませんでした'%s@%ld' と '%s@%ld' は祖先が関連していなければなりません'--new' オプションは '--old' オプションとともに使われた場合のみ有効です'--xml' オプションは '--summarize' オプションとともに使われた場合のみ有効です'DAV:baseline-collection' はベースラインのリソースには存在しませんでした'get-file-revs' REPORT は実装されていません'get-file-revs' は実装されていません'get-location-segments' REPORT は実装されていません'get-location-segments' は実装されていません'get-locations' REPORT は実装されていません'get-locations' は実装されていません'incremental' オプションは XML モードでのみ有効です'stat' は実装されていません'verbose' オプションは XML モードでは無効です'with-all-revprops' オプションは XML モードでのみ有効です'with-revprop' オプションは XML モードでのみ有効です(バイナリファイルが異なっています) 拒否しますか (R)、一時的に承認しますか (t)? 拒否しますか (R)、一時的に承認しますか (t)、常に承認しますか (p)? (不正な日時)(ローカル)(変更者の情報がありません)(日付の情報がありません), すべてのオプションを表示 (s): * リビジョン %ld をダンプしました。 * リビジョン %ld を検証しました。 , 衝突自分 (mc), 衝突他人 (tc), 完全自分 (mf), 完全他人 (tf), 全差分 (df), 編集 (e), 解決版 (r)--- (別のリポジトリから) r%ld を '%s' にマージしています: --- (別のリポジトリから) r%ld から r%ld までを '%s' にマージしています: --- 異なるリポジトリ URL の間の差分を '%s' にマージしています: --- リポジトリ URL 間の差分を '%s' にマージしています: --- r%ld を '%s' にマージしています: --- r%ld から r%ld までを '%s' にマージしています: --- (別のリポジトリから) r%ld を '%s' に逆マージしています: --- (別のリポジトリから) r%ld から r%ld までを '%s' に逆マージしています: --- r%ld を '%s' に逆マージしています: --- r%ld から r%ld までを '%s' に逆マージしています: ----------------------------------------------------------------------- **注意** 認証領域 %s のパスワードは暗号化されていないディスクに保存されるだけです! 可能なら、 Subversion がパスワードを暗号化して保存できるよう、システムを設定するこ とをお勧めします。詳しくはドキュメントを参照してください。 '%s' の 'store-plaintext-passwords' オプションの値を 'yes' または 'no' に設定すると、この警告がこれ以上現れないようにすることができます。 ----------------------------------------------------------------------- -- この行以下は無視されます ----accept=%s は --non-interactive とともに使用することはできません--auto-props と --no-auto-props は互いに排他的です--depth と --set-depth は互いに排他的です--depth は --reintegrate とともに使用することはできません--encoding オプションは、Subversion の管理下に置かれているテキストの属性のみに適用できます--force は --reintegrate とともに使用することはできません--reintegrate は --ignore-ancestry とともに使用することはできません--reintegrate は --ignore-ancestry や --record-only とともに使用することはできません--reintegrate は --record-only とともに使用することはできません--relocate と --depth は互いに排他的です-r は --reintegrate とともに使用することはできません.merge-left.r%ld.merge-right.r%ld.working。完了させるために 'svn update' を実行してください<<< オリジナルのリビジョン %ld に基づき、新しいトランザクションを開始しました には系統情報がありません'%s' の MERGE レスポンスはマージ先 ('%s') の子ノードではありませんチェックサムの不一致が生じました作業ディレクトリ内に競合があり、実行中の操作が妨害されました必要ないのにログメッセージが指定されましたこの操作ではバージョン管理下にあるパスが必要です問題が発生しました。詳しくは他のエラーを参照してくださいデータが入力されなかったので報告を作成できませんでしたリポジトリフックの実行が失敗しました読んでいる際に表現が消えたか変更されたかしています作業コピーのマージ元にはリビジョンの明示的な指定が必要です (一部のコマンドは : の範囲も 引数にとることができます) リビジョン引数は次のいずれかを使って指定できます: NUMBER リビジョン番号 '{' DATE '}' その日時が始まったときのリビジョ ン 'HEAD' リポジトリで最新のもの 'BASE' 項目の作業コピーのベースとなるリ ビジョン 'COMMITTED' BASE またはそれ以前の最後のコミ ット 'PREV' COMMITTED の直前のリビジョンコミットを中断しています: '%s' がまだ競合していますアクセススキームの混在はまだサポートされていません ('%s' および '%s')作業が見つかりません追加追加: %s 追加: %s%s追加しています %s 追加しています (バイナリ) %s ディレクトリの追加が失敗しました: %s (対象: %s) (%d)認証供給者はすべて使い果たされています非相対的な対象のルート URL はすべて同一でなければなりませんApache が不正な URI を受け取りましたApache に SVN ファイルシステムへのパスがありませんapply-textdelta は既に使えるようになっていますapply-textdelta は使えませんすべての対象は同じ作業コピーの一部ですか?--limit に渡す引数は正でなければなりません指定したファイルを <変更リスト> に入れます (または <変更リス ト> から外します)。 使用方法: 1. changelist <変更リスト> <対象>... 2. changelist --remove <対象>... 1 つ以上の属性を変更できませんでした。リポジトリに変更は加えられていません少なくとも 1 つのリビジョン (r%ld) が '%s' からマージされていませんpeg リビジョン指定をつけて diff を使う場合、少なくとも一方のリビジョンはローカルにあってはいけませんリビジョン %ld です。 ファイルシステムの変更不可ノードを変更しようとしました'%s' とそれ自体とを差分化しようとしました機能 '%s' を取得しようとしましたが、返ってきたのは '%s' でした空の作業コピーアンワインドスタックに対してポップしようとしていますファイルシステムのルートディレクトリを削除または再作成しようとしていますコミットではない操作中に、作業コピーの属性 '%s' を '%s' に設定しようとしています空でないアンワインドスタックのロックを解除しようとしています管理用ディレクトリでコマンドを実行しようとしました変更不可ノードでマージ追跡情報を変更しようとしました変更不可ノードでマージ情報数を変更しようとしました変更不可ノードを削除しようとしました変更できないノードの子を複製しようとしました不正な名前 '%s' をもつノードを作成しようとしましたディレクトリでない親にエントリを作成しようとしました既に存在するエントリを作成しようとしました不正な名前 '%s' をもつノードを削除しようとしましたディレクトリでないノードからエントリ '%s' を削除しようとしました変更不可なディレクトリノードからエントリ '%s' を削除しようとしましたファイルでないノードのチェックサムを取得しようとしましたファイルでないノードの長さを取得しようとしましたファイルでないノードのテキストを取得しようとしました既にロックされたディレクトリをロックしようとしました不正な名前 '%s' をもつ子のクローンを作成しようとしました不正な名前 '%s' をもつノードを開こうとしました存在しない子ノード '%s' を開こうとしました変更不可ノードにエントリを設定しようとしましたディレクトリでないノードにエントリを設定しようとしましたファイルでないノードにテキストを設定しようとしました変更不可ノードにはテキストを設定できませんトランザクションでないものに書き込もうとしました修正されているリソースに対し、制限のある操作をしようとしていますURL に複数回コミットしようとしていますサーバの認証エラーです: %s認証に失敗しました認証領域: %s 変更者の名前に改行文字を入れてはいけません認証に失敗しましたキャッシュ内に不正な ID があります不正な URL が RA 層に渡されました受け取った copyfrom の引数が不正ですデータベースのバージョンが不正です: %d.%d.%d と共にコンパイルされましたが、%d.%d.%d を背景として動作していますデータベースのバージョンが不正です: %d.%d.%d が使われていますが、%d.%d.%d 以上であるべきですマージが不正です。祖先・マージ元・対象のどれかが同じファイルシステムにありませんマージが不正です。対象 '%s' が祖先と同じ ID '%s' をもっていますsvn_make_pool() に渡された親メモリプールが不正です属性名が不正です属性名が不正です: '%s''%s' の BASE のチェックサムが一致しませんでした: 期待: %s 実際: %s ベースラインが不正ですBerkeley DB のデッドロックエラーですBerkeley DB のエラーですファイルシステム '%s' に対して %s をしているときに Berkeley DB エラーが起きました ファイルシステム '%s' に対して環境を閉じているときに Berkeley DB エラーが起きました ファイルシステム '%s' に対して環境を作成しているときに Berkeley DB エラーが起きました ファイルシステム '%s' に対して環境を開いているときに Berkeley DB エラーが起きました キャッシュ内に不正な ID '%s' がありますURL が不正ですUUID が不正です日時が不正ですファイル名が不正ですMIME タイプが不正です不正なリビジョン情報を指定されましたリビジョン報告が不正ですサーバの指定が不正ですリポジトリの変更点を作業コピーに取り入れます。 使用方法: update [<パス>...] リビジョンが指定されなかった場合は HEAD リビジョンを取り入れ、作業コピーを 最新の状態にします。そうでない場合、-r で指定されたリビジョンで作業コピーを 同期します。 更新された各項目に関しては、行われた操作を報告する文字が行頭につけられます。 これらの文字は次のような意味をもっています: A 追加されました D 削除されました U 更新されました C 競合しています G マージされました E 存在していました 1 列目の文字は、実際のファイルに対する更新を意味します。これに対し、ファイ ルの属性に対する更新は 2 列目で示されます。3 列目に 'B' がある場合、それは、 そのファイルに関するロックが破壊されたか奪われたことを意味します。 --force が指定されている場合、更新によって作業コピー内にパスを追加しようと したときに、バージョン管理下にない同名のパスが障害となっても、それだけで更 新が自動的に失敗することはありません。障害となっているパスがリポジトリ内の 対応するパスと同じ種別 (ファイルかディレクトリか) である場合、そのパスはバ ージョン管理下に置かれますが、その内容は作業コピー内に「そのまま」残されま す。つまり、障害となっているディレクトリの中で、バージョン管理下にない子ノー ドがまた障害となっていると、それもまたバージョン管理下に置かれるかもしれま せん。ファイルに関しては、障害となっているものとリポジトリ内のものの内容の 違いはすべて、作業コピーへのローカルの修正のように扱われます。リポジトリで 与えられている属性はすべて、障害となっているパスに適用されます。障害となっ たパスは 1 列目でコード 'E' を用いて報告されます。 --set-depth オプションを用いると、この操作の対象に対して、作業コピーの深さ を新たに設定できます。現在のところ、作業コピーディレクトリの深さは増やすこ と (より深いところを望遠鏡で覗くこと) しかできません。つまり、ディレクトリ を浅くすることはできません。 クライアントの接続を受け入れることができません削除準備中の親ディレクトリに '%s' を加えることはできません削除されたディレクトリに '%s' を追加できません。まず親ディレクトリの削除を無効にしてみてくださいファイルシステムの相互排他ロックを割り当てられません'%s' を '%s' に加えられませんサーバソケットをバインドできません要求された日時を計算できませんリクエストのボディのサイズを計算できませんファイル '%s' の権限を変更できません作業ディレクトリを '%s' に変更できませんディレクトリ '%s' をチェックできませんパス '%s' をチェックできませんchmod '%s' はできませんディレクトリ '%s' を閉じることができませんファイル '%s' を閉じられませんトランザクション '%s' 用のプロトタイプリビジョンロックファイルを閉じることができませんストリームを閉じられませんホスト '%s' に接続できませんモジュールパスを UTF-8 から UCS-2 に変換できません: '%s''%s' から '%s' に文字列を変換できません:'%s' からネイティブのエンコーディングに文字列を変換できません:ネイティブのエンコーディングから '%s' に文字列を変換できません:文字列を UCS-2 に変換できません: '%s''%s' から '%s' にコピーできませんFSFS トランザクションリストの相互排他ロックを作成できませんFSFS txn-current 相互排他ロックを作成できませんFSFS 書き込みロックの相互排他ロックを作成できません'%s' から '%s' への文字列コンバータを作成できません'%s' からネイティブのエンコーディングへの文字列コンバータを作成できませんネイティブのエンコーディングから '%s' への文字列コンバータを作成できませんキャッシュの相互排他ロックを作成できませんディレクトリ '%s' を作成できませんフック '%s' 用の空の標準出力を作成できませんフック '%s' 用のパイプを作成できませんプロセス '%s' の属性を作成できませんサーバソケットを作成できませんシンボリックリンク '%s' を作成できませんスレッドを作成できませんスレッド属性を作成できませんトンネルを作成できませんファイルでない '%s' の MIME タイプを検出できませんネイティブのパスエンコーディングを決定できません時刻を人間の読める形に変換できませんFSFS 共有データを取得できません一時ディレクトリが見つかりません作業コピーパスが見つかりませんエントリが見つかりません'%s' を追加しようとしましたが、親ディレクトリのエントリが見つかりませんでしたファイル '%s' をフラッシュできませんファイルをディスクにフラッシュできませんストリームをフラッシュできませんアドレス情報を取得できませんファイル '%s' から属性情報を取得できませんストリームから属性情報を取得できません'%s' にあるファイルの、デフォルトのファイル権限を取得できません (ファイルの状態を取得する際にエラーが発生しました)ディレクトリでないもののエントリは取得できませんファイル '%s' に対して排他的なロックを取得できませんファイル名を取得できません'%s' にあるファイルのファイル権限を取得できません (ファイルの状態を取得する際にエラーが発生しました)ホスト名を取得できませんローカルのホスト名を取得できませんモジュールファイル名を取得できませんパスワードを取得できませんファイル '%s' で共有ロックを取得できませんソケットのタイムアウト時間を取得できませんユーザ名もパスワードも取得できません作業ディレクトリを取得できません動的共有オブジェクト (DSO) の相互排他ロックを奪えませんファイルシステムの相互排他ロックを奪えません'%s' の FSFS 相互排他ロックを奪えませんFSFS トランザクションリストの相互排他ロックを奪えませんディレクトリ '%s' を隠せませんファイルノードリビジョン %%s のマージ情報数を %%%s (> 1) に増加できませんノードリビジョン %%s のマージ情報数を負の値 %%%s に増加できませんキャッシュの相互排他ロックにロックをかけられません文字コード変換の相互排他ロックをかけられませんディレクトリ '%s' を作成できませんフック '%s' 用の、継承されていないパイプ読み取りハンドルを作成できませんフック '%s' 用の、継承されていないパイプ書き込みハンドルを作成できません現在の日時を処理できません'%s' から '%s' にファイル名を変更できません移動元から移動先へ移動できません'%s' を開けませんディレクトリ '%s' を開けませんファイル '%s' を開けません'%s' にあるファイルを開けません標準エラー出力を開けません標準入力を開けません標準入出力のファイルを開けません標準出力を開けませんlock/entries ハッシュファイル '%s' をパースできませんリンクの内容を読めませんディレクトリを読めませんディレクトリ '%s' を読めません'%s' 中のディレクトリエントリを読めませんファイル '%s' を読めませんformat ファイル '%s' の 1 行目を読めません接続を読めませんファイル '%s' 中の長さの行を読めませんストリーム中の長さの行を読めません標準入力を読めませんストリームを読めませんAPR からのエラー文字列を再エンコードできません'%s' を削除できませんディレクトリ '%s' を削除できませんファイル '%s' を削除できません削除されたディレクトリの '%s' を置換できません。まず親ディレクトリの削除を無効にしてみてください'%s' は、異なる種別のノードに置換できません。'%s' を追加する前に、削除をコミットして親ディレクトリを更新しなければいけません作業ディレクトリを元に戻すことはできませんディレクトリ '%s' の読み込み位置を先頭に戻せません'%s' にアクセス時刻を設定できません独立した状態を設定できませんファイル '%s' を読み取り専用に設定できませんファイル '%s' を読み書き両用に設定できません'%s' に権限を設定できませんファイル '%s' 中に位置ポインタを設定できませんストリーム中に位置ポインタを設定できませんプロセス '%s' に対して子のエラー出力ファイルを設定できませんプロセス '%s' に対してエラーハンドラ用の子のエラー出力ファイルを設定できませんプロセス '%s' に対して子の入力を設定できませんプロセス '%s' に対して子の出力ファイルを設定できませんプロセス '%s' に対してコマンドタイプを設定できませんプロセス '%s' に対してディレクトリを設定できませんプロセス '%s' に対してエラーハンドラを設定できません変更不可なノードリビジョン %s には属性リストを設定できませんディレクトリの内容にはテキストを設定できません-c は、--old と同時には指定できませんプロセス '%s' を開始できません'%s' に対して stat を実行できませんFSFS 共有データを保存できませんコマンド '%s' をトークン化できません動的共有オブジェクト (DSO) の相互排他ロックを手放せませんファイルシステムの相互排他ロックを手放せません'%s' の FSFS 相互排他ロックを手放せませんFSFS トランザクションリストの相互排他ロックを手放せませんキャッシュの相互排他ロックのロックを解除できません文字コード変換の相互排他ロックを解除できませんロックされていないトランザクション '%s' のロックを解除できませんトランザクション '%s' 用のプロトタイプリビジョンロックファイルのロックを解除できません未知のトランザクション '%s' のロックを解除できません'%s' に書き込めません接続に書き込めませんファイル '%s' に書き込めませんストリームに書き込めませんバイナリファイル '%s' に対しては blame で各行の最終変更者を計算できませんノード種別を変更できません同じ URL を参照しているため、'%s' と '%s' を共にコミットできません二つの異なるファイルシステムの間でファイルの内容の比較はできません二つの異なるファイルシステムの間で属性値の比較はできません二つの異なるファイルシステム ('%s' と '%s') の間でコピーはできません'%s' のコピーや移動はできません: それはまだリポジトリに入っていないので、最初にコミットしてみてくださいパス '%s' はそれ自体の子ノード '%s' にはコピーできませんまだ同期されていないリビジョン (%ld) のリビジョン属性はコピーできません削除準備中のディレクトリ '%s' にはコピーできません'%s' へのコピーはできません。それはリポジトリ '%s' ではなく '%s' に由来しています。作業コピーのリビジョンを決定できません表示できません: バイナリ形式としてマークされたファイルです。%s'%s' の URL が見つかりません内容を含んだリポジトリは初期化できません非対話的にログメッセージを取得するためのエディタを呼び出せませんコピー元 (または移動元) にリポジトリと作業コピーは混在できませんファイルシステム内の、'%s' という名前のトランザクションは変更できません (ファイルシステム '%s')URL '%s' はそれ自体には移動できませんパス '%s' はそれ自体には移動できません認証機構と交渉できません深さが無限 (infinity) でないノードが存在する作業コピーへの再統合はできませんローカルで修正が加えられた作業コピーへの再統合はできません子孫ツリーが switch されている作業コピーへの再統合はできません複数のリビジョンが混在している作業コピーへの再統合はできません。最初に update を実行してみてくださいディレクトリを内側から置換することはできませんパスがそれ自体の将来の履歴からリビジョン範囲を逆マージすることはできません。最初に update を実行してみてください'%s' を元に戻せません: エントリのノード種別がサポートされていません'%s' を元に戻せません: 作業コピーのノード種別がサポートされていませんカレントディレクトリの追加は元に戻せません。親ディレクトリでもう一度試してみてください'%s' をディレクトリ ('%s') に設定できません'%s' をファイル ('%s') に設定できませんリビジョン範囲は、2 つの URL とともに指定することはできませんバージョン管理された属性 '%s' の削除においてはリビジョンを指定できませんバージョン管理された属性 '%s' の編集ではリビジョンを指定できませんバージョン管理された属性 '%s' に対してはリビジョンの指定はできません移動操作に (HEAD 以外の) リビジョンは指定できませんパス '%s' のロックを解除できません。認証済みのユーザ名が利用不可能です--username や --password は、--source-username、--source-assword、--sync-username、--sync-password のいずれとも使用できません。 パス '%s' にかけられたロックを検証できません。対応するロックトークンが利用不可能ですパス '%s' にかけられたロックを検証できません。利用できるユーザ名がありませんlock/entries ハッシュファイル '%s' を書き込めません'%s' の属性のハッシュを書き込めません現在他のプロセスが前の表現を書き込み中なので、トランザクション '%s' のプロトタイプリビジョンファイルに書き込めません現在このプロセスが前の表現を書き込み中なので、トランザクション '%s' のプロトタイプリビジョンファイルに書き込めませんcapability エントリが単語ではありませんシグナルを受け取りましたこの API の呼び出しを中止します証明書情報: - ホスト名: %s - 有効範囲: %s から %s まで - 発行者: %s - フィンガープリント: %s 変更のあったパス: changed-path エントリがリストではありません変更リストが一致しません変更リスト:%s 外部項目 (リビジョン %ld) をチェックアウトしました。 リビジョン %ld をチェックアウトしました。 チェックアウトが終わりました。 '%s' のチェックサムが一致しませんでした: 期待: %s 実際: %s '%s' のチェックサムが一致しませんでした。期待: '%s', 実際: '%s''%s' のチェックサムが一致しませんでした。レコード: '%s', 実際: '%s'結果として得られるフルテキスト (%s) のチェックサムが一致しませんでした: 期待: %s 実際: %s チェックサムが一致しないのでテキストベースが壊れているようです: '%s' 期待: %s 実際: %s 表現 '%s' のチェックサムが一致しませんでした: 期待: %s 実際: %s 表現の読み込み時にチェックサムが一致しませんでした: 期待: %s 実際: %s ファイル '%s' のチェックサムが一致しませんでした: 期待: %s 実際: %s 表現 '%s' のチェックサムが一致しませんでした: 期待: %s 実際: %s チェックサム: %s クライアントの証明書ファイル名: クライアントとサーバーのバージョンが一致しませんコマンド 'finish-replay' が一連の replay の外にあり不正ですコミットバージョン管理されていないファイルやツリーをリポジトリに入れてコミッ トします。 使用方法: import [<パス>] <パス> のコピーを再帰的に にコミットします。 <パス> が省略された場合は、<パス> は '.' だと仮定します。 リポジトリには、必要に応じて親ディレクトリが作成されます。 <パス> がディレクトリの場合、そのディレクトリの内容が の下に直接追加 されます。 --force が指定されている場合でも、デバイスファイルやパイプのようなバージョ ン管理できない項目は無視されます。 コミットでリビジョン %ld が作成されましたが、作成されるべきだったのは %ld ですコミットに失敗しました (詳しい理由は以下のとおりです):コミット対象の項目 '%s' にはコピーフラグがついていますが、リビジョンが不正ですコミット対象の項目 '%s' にはコピーフラグがついていますが、コピー元の URL がありませんコミットには成功しましたが、続けて他のエラーが生じました:コミットには成功しましたが、post-commit フックの実行が失敗しましたリビジョン %ld をコミットしました。 追加準備状態にあるディレクトリにコミットしていますsvndiff データの圧縮に失敗しました設定エラー: '%s' は整数値として不正です設定エラー: 不正な値 '%s' がオプション '%s' に指定されています競合状態にある、現在 BASE であるファイル: %s 競合状態にある、以前 BASE だったファイル: %s 競合状態にある、以前作業中だったファイル: %s 競合に関する属性ファイル: %s '%s' で競合が生じています衝突コールバックが API を侵犯しました: マージされたファイルは返しませんでした衝突コールバックが API を侵犯しました: マージされたファイルは返しませんでした衝突コールバックが API を侵犯しました: 結果は返しませんでした衝突コールバックが API を侵犯しました: 結果は返しませんでした'%s' で競合が見つかりました。 '%s' を追加しようとしましたが競合が見つかりました。 同名のオブジェクトが既に存在します。 属性 '%s' に関する競合が '%s' で見つかりました。 競合を解決できませんでしたコピー元のリビジョン: %ld コピー元の URL: %s リビジョン %ld の属性をコピーしました (属性 %s* は飛ばしました)。 リビジョン %ld の属性をコピーしました。 コピーによる追加: %s (コピー元: リビジョン %ld, %s) 変更可能なツリーからのコピーは今のところサポートされていません'%s'@%ld から '%s' への、r%ld をベースとするリビジョンでのコピーにおいて、コ ピー元のチェックサムが一致しませんでした: 期待: %s 実際: %s コピー元の URL '%s' のリポジトリルートが、'%s' と異なっていますトランザクションからのコピーは許可されませんDB が壊れています: 祖先の番号が不正ですDB が壊れています: ファイルシステム '%s' の最初のコピー ID が '0' でありませんDB が壊れています: ファイルシステム '%s' の最初のリビジョン番号が '0' でありませんDB が壊れています: ファイルシステム '%s' の最初のトランザクション ID が '0' でありません現在のファイルは壊れています'%s' (ファイルシステム '%s') の 'copies' テーブルでエントリの値が壊れています'%s' (ファイルシステム '%s') の 'transactions' テーブルでエントリの値が壊れています壊れたリビジョン %ld がファイルシステム '%s' にあります'%s' (ファイルシステム '%s') の 'locks' テーブルでロックが壊れていますパス '%s' (ファイルシステム '%s') のロックファイルが壊れていますnode-rev の node-id が壊れています表現 '%s' から '%s' への一連の差分を読み込んでいるときに、不正な部分を見つけましたトップレベルのディレクトリを作成できませんでしたVersion Resource URL (インポート中、またはローカルからなくなった際に必要になる、キャッシュされた属性) を取得できませんでした'%s' のリビジョン範囲リスト行に行末文字が見つかりませんでしたレスポンスから content-type を取得できませんでしたSASL ライブラリを初期化できませんでしたホスト名を検索できませんでした: %sSASL 機構の一覧を取得できませんでしたマージ情報文字列 '%s' をパースできませんでしたファイルを保存できませんでしたバージョン管理されたリソースの URL を保存できませんログメッセージを取得するのに外部エディタを使えませんでした。$SVN_EDITOR 環境変数を設定するか、--message (-m) か --file (-F) オプションを用いてみてくださいsvndiff を一時ファイルに書き込めませんでした'%s' の絶対パスを決定できませんでした属性のマージはできませんリポジトリが見つかりません認証済みのユーザ名を取得できませんでしたリポジトリを開けませんログを開けません新しいディレクトリを作成しバージョン管理下におきます。 使用方法: 1. mkdir <パス>... 2. mkdir ... バージョン管理されたディレクトリを作成します。 1. 作業コピーの <パス> で指定された各ディレクトリがローカルに作られ、次回の コミット時に追加されるよう準備されます。 2. で指定された各ディレクトリが直接のコミットによってリポジトリ内に作 られます。 どちらの場合でも、--parents オプションが指定されていない場合は、途中のディレ クトリはすべて存在していなくてはなりません。 バージョン管理されないコピーのディレクトリツリーを生成します。 使用方法: 1. export [-r ] [@] [<パス>] 2. export [-r ] <パス 1>[@] [<パス 2>] 1. で指定されたリポジトリから、Subversion の管理用ファイルを含まない ディレクトリツリーを <パス> にエクスポートします。その際、 を指定し ていればリビジョン の、そうでないときは HEAD のツリーがエクスポー トされます。<パス> を省略した場合は、ローカルのディレクトリ名として のベース名が使われます。 2. <パス 1> で指定された作業コピーから、Subversion の管理用ファイルを含まな いディレクトリツリーを <パス 2> にエクスポートします。その際、 を指 定していればリビジョン の、そうでないときは作業中 (WORKING) のツリー がエクスポートされます。<パス 2> を省略した場合は、ローカルのディレクト リ名として <パス 1> のベース名が使われます。 を指定していない場合、 ローカルでの変更はすべて保存されます。バージョン管理下にないファイルはコ ピーされません。 を指定すると、リビジョン での <対象> をまず探します。 作成日時: %s DAV サンドボックスディレクトリを作成しています認証ファイルを作成しています設定用のディレクトリを作成していますDB ロックファイルを作成していますDB ログロックファイルを作成していますフック用のディレクトリを作成していますロック用のディレクトリを作成していますパスワードファイルを作成していますpost-commit フックを作成していますpost-revprop-change フックを作成していますpre-commit フックを作成していますpre-revprop-change フックを作成していますstart-commit フックを作成していますsvnserve.conf ファイルを作成しています利用できるクレデンシャがありませんクレデンシャルが保存されていませんDAV リクエストに失敗しました。リポジトリの pre-revprop-change フックが機能不全であるか存在しない可能性がありますデータは安全に XML エスケープされていませんsvndiff データの解凍に失敗しましたデフォルトのエントリにリビジョン番号がありませんデフォルトのエントリに URL がありませんデフォルト: '-u'。Subversion が外部の diff プロ グラムを呼び出すとき、 は単純にそのプログラ ムに渡されます。しかし、Subversion がデフォルト の内部の diff の実装を呼び出す場合や blame の注 釈情報を表示する場合、 には以下のいずれかを 使ってください。 -u (--unified): 3 行の unified context を出力します。 -b (--ignore-space-change): 空白文字の数に関する変更を無視します。 -w (--ignore-all-space): すべての空白文字を無視します。 --ignore-eol-style: 行末 (EOL) スタイルの変更を無視します。デフォルト: '-u'。Subversion が外部の diff プロ グラムを呼び出すとき、 は単純にそのプログラ ムに渡されます。しかし、Subversion がデフォルト の内部の diff の実装を呼び出す場合や blame の注 釈情報を表示する場合、 には以下のいずれかを 使ってください。 -u (--unified): 3 行の unified context を出力します。 -b (--ignore-space-change): 空白文字の数に関する変更を無視します。 -w (--ignore-all-space): すべての空白文字を無視します。 --ignore-eol-style: 行末 (EOL) スタイルの変更を無視します。 -p (--show-c-function):\n" 差分の出力で C の関数名を表示します。削除が失敗しました: ディレクトリにエントリ '%s' がありません削除削除: %s 削除: %s%s削除しています %s 差分指定の深さ 'exclude' はサポートされていませんdelta が新しいデータを十分に含んでいませんdelta が対象の window を満たしていませんdelta 属性ブロックが検出されました - svndumpfilter ではサポートされませんリビジョン %ld を差分化しています...深さ 'exclude' は、リンクではサポートされていません深さ: *不正* 深さ: 空 (empty) 深さ: ファイルのみ (files) 深さ: 直下まで (immediates) このプログラムやそのサブコマンドの使用方法を説明します。 使用方法: help [<サブコマンド>...] このプログラムやそのサブコマンドの使用方法を説明します。 使用方法: svndumpfilter help [<サブコマンド>...] コピー先 (もしくは移動先) '%s' は既に存在していますコピー先 (もしくは移動先) '%s' はディレクトリではありません同期先の HEAD (%ld) が最後にマージされたリビジョン (%ld) ではありません。svnsync を用いずに同期先リポジトリにコミットしたのではありませんか?コピー先 (もしくは移動先) の URL が壊れていますコピー先 (または移動先) のディレクトリは存在します。強制しないかぎり上書きされませんコピー先 (または移動先) のディレクトリは既に存在します。ディレクトリを削除するか --force を用いて上書きしてください。add-with-history のコピー先 (もしくは移動先) のディレクトリに URL がありません同期先リポジトリは初期化されていません同期先リポジトリは既に '%s' から同期中です'%s' が作業コピーのルートであるとは予想していませんでしたlock レスポンスに対する終了記号を受け取れませんでしたunlock レスポンスに対する終了記号を受け取れませんでしたdiff データのソースが突然変更されました表現 '%s' において diff のバージョンが一致していません作業コピー管理領域を含むディレクトリ '%s' がありませんディレクトリ '%s' には THIS_DIR エントリがありませんディレクトリ '%s' に URL がありませんディレクトリ '%s' がありませんディレクトリ '%s' はリポジトリ側と比べて古くなっていますディレクトリ '%s' はリポジトリ側と比べて古くなっています。update を実行してみてくださいディレクトリエントリが壊れていますディレクトリは空でなければなりませんが、そうではありませんdirlist 要素がリストではありませんこのリポジトリ機能は無効になりましたローカルまたはリモートの項目に関する情報を表示します。 使用方法: info [<対象>[@]...] 各 <対象> (デフォルト: '.') に関する情報を表示します。 <対象> は作業コピーのパスでも URL でもかまいません。 を指定すると、リ ビジョン での <対象> をまず探します。 2 つのリビジョンまたはパスの差分を表示します。 使用方法: 1. diff [-c | -r [:]] [<対象>[@]...] 2. diff [-r [:]] --old=<古い対象>[@<古い REV>] \ [--new=<新しい対象>[@<新しい REV>]] [<パス>...] 3. diff <古い URL>[@<古い REV>] <新しい URL>[@<新しい REV>] 1. リビジョン において <対象> にあった項目の、2 つのリビジョン間での 差分を表示します。<対象> は、すべて作業コピーのパスまたはすべて URL です。 <対象> が作業コピーのパスである場合、デフォルトでは が BASE で は作業コピーとなります。<対象> が URL である場合、 は指定しなければな らなく、 はデフォルトでは HEAD となります。 '-c ' オプションは、 = -1 のときの '-r :' に相当します。 '-c -' とすると逆、つまり '-r :' (ただし = -1) となりま す。 2. リビジョン <古い REV> において <古い対象> にあった項目と、リビジョン <新 しい REV> において <新しい対象> にあった項目との差分を表示します。<パス> に <古い対象> と <新しい対象> に対する相対パスを与え、それらのパスに関す る差分だけを出力するようにすることができます。<古い対象> と <新しい対象> は作業コピーのパスでも URL[@] でもかまいません。<新しい対象> は、明 示的に指定されない場合はデフォルトで <古い対象> となります。-r があ る場合 <古い REV> はデフォルトで となります。また、-r : がある 場合 <古い REV> はデフォルトで となり、<新しい REV> はデフォルトで となります。 3. 'svn diff --old=<古い URL>[@<古い REV>] --new=<新しい URL>[@<新しい REV>]' の短縮形です。 作業コピーにローカルで加えられた変更を見るには、単に 'svn diff' を使ってく ださい。 フィルタリングを行うときに統計を表示しません。リビジョン属性にはフィルタをかけません。機能 '%s' についての情報がありません'%s' (機能 '%s' 用) の扱い方に関する情報がありませんダンプストリームの '%.20s' に不正な (':' がない) ヘッダが含まれていますダンプストリームの '%.20s' に不正な (値がない) ヘッダが含まれていますダンプストリームデータが不正なようです作業コピーまたはリポジトリ中の何かを、履歴をもたせたまま複製します。 使用方法: copy <コピー元>[@]... <コピー先> 複数の <コピー元> をコピーする場合、それらは <コピー先> の子ノードとして追加 されるので、<コピー先> はディレクトリでなければなりません。 <コピー元> と <コピー先> は作業コピー (WC) のパスと URL のどちらかで指定で きます: WC -> WC: (履歴をもたせたまま) コピーして追加準備状態にします WC -> URL: WC のコピーを直接 URL にコミットします URL -> WC: URL をチェックアウトして WC に入れ、追加準備状態にします URL -> URL: 完全なサーバサイドのコピーです。ブランチとタグに用いられます <コピー元> はすべて同じ種別でなければなりません。 警告: Subversion の以前のバージョンとの互換性のため、2 つの作業コピーパスの間 で行うコピー (WC -> WC) では、リポジトリにアクセスしません。そのため、このよ うなコピーでは、デフォルトではコピー元からコピー先へのマージ追跡情報の伝播が なされない可能性があります。 属性を外部エディタで編集します。 使用方法: 1. propedit <属性名> <対象>... 2. propedit <属性名> --revprop -r <リビジョン> [<対象>] 1. 作業コピー内またはリポジトリ内にあるバージョン管理下の属性を編集します。 2. リポジトリのリビジョンに関する、バージョン管理下にないリモートの属性を編 集します。 <対象> には、アクセスするリポジトリを決める意味しかありません。 属性の設定に関しては 'svn help propset' を参照してください。 URL とバージョン管理された項目のどちらかが必要ですエラーリストが空ですキャッシュ内に空の noderev があります終了リビジョン %ld が不正です (最新のリビジョンは %ld です)エントリ '%s' は準備中の処理が不正ですエントリ '%s' は '%s' の値が不正ですエントリ '%s' はノード種別が不正ですエントリ '%s' に URL がありませんエントリ '%s' が特殊なステータスを突然変更しましたエントリ '%s' は既にバージョン管理下におかれていますエントリが既に存在します標準的でないパス '%s' を含んでいます'%s' のエントリが存在します (それなのに作業ファイルがありません)'%s' のエントリはリポジトリルートが不正です'%s' に対するエントリに URL はありません'%s' のエントリには「コピーされた」というマークがついていますが、コミット時に 追加されるよう準備されてはいません。もしかして、バージョン管理下にない (または 今のところまだバージョン管理下にない) ディレクトリの中の対象をコミットしようと していますか?エントリが不正な属性をもっていますエントリに URL がありませんエントリにリビジョンがありません報告を中断する際にエラーが発生しましたエントリ %d ('%s' の entries ファイル内) でエラーが発生しました:コミット後にリビジョンを上げる際にエラーが発生しました (詳しくは以下のとおりです):外部プログラムの呼び出し中にエラーが発生しましたディレクトリ '%s' を閉じる際にエラーが発生しましたファイルシステムを閉じる際にエラーが発生しました空のファイルを閉じる際にエラーが発生しました標準エラー出力パイプの読み込みの終点を閉じる際にエラーが発生しました標準エラー出力パイプの書き込みの終点を閉じる際にエラーが発生しました'%s' と '%s' の比較中にエラーが発生しましたログファイルのコピー中にエラーが発生しました。 DB_LOG_AUTOREMOVE 機能が hotcopy アルゴリズムを妨害しているかもしれません。 問題が起き続けるようであれば、DB_CONFIG でこの機能を無効にしてみてください'%s' を追加する際にエラーが発生しました'%s' を再帰的にコピーする際にエラーが発生しました'%s' の 'affected time' を取得している際にエラーが発生しました'%s' の 'affected time' を取得している際にエラーが発生しました'%s' の 'affected time' を取得中にエラーが発生しましたプロセスの UID を取得する際にエラーが発生しました'%s' のファイルサイズを取得中にエラーが発生しました子プロセスにおいてエラーが発生しました: %sコミット後の掃除中にエラーが発生しました (詳しくは以下のとおりです):コマンドライン引数の初期化中にエラーが発生しました'%s' のエントリを変更中にエラーが発生しました'%s' のエントリを変更している際にエラーが発生しました編集内容を内部形式に正規化する際にエラーが発生しましたログメッセージを内部形式に正規化する際にエラーが発生しましたDB ロックファイルを開く際にエラーが発生しました属性 %s を '%s' においてパースする際にエラーが発生しました: '%s''%s' をパースする際にエラーが発生しました引数をパースする際にエラーが生じましたdiff のオプションをパースする際にエラーが発生しましたmemcache サーバ '%s' をパースする際にエラーが発生しましたリビジョン番号をパースする際にエラーが生じましたコマンド '%s' を '%s' 内で処理しているときにエラーが発生しましたキー '%s' の変更の読み込み中にエラーが発生しましたスプールされた %s リクエストレスポンスを読み込む際にエラーが発生しましたエントリ '%s' からの変更リストの削除中にエラーが発生しました'%s' のエントリからロックを削除する際にエラーが発生しました'%s' のテキストベースを置換している際にエラーが発生しました'%s' の競合を解消する際にエラーが発生しました'%s' のテキストを元に戻す際にエラーが発生しましたREPORT の取得中にエラー (%d) が発生しましたreplay REPORT の取得中にエラー (%d) が発生しました'%s' の実行中にエラーが発生しました。終了コードは %d で、引数は以下のとおりです: 実行ディレクトリ: '%s', ベース名: %s %s %shotcopy の catastrophic recovery 実行中にエラーが起きました。 DB_LOG_AUTOREMOVE 機能が hotcopy アルゴリズムを妨害しているかもしれません。 問題が起き続けるようであれば、DB_CONFIG でこの機能を無効にしてみてくださいエディタの実行中にエラーが発生しました。エディタの実行中にエラーが発生しました。すべての競合をそのままにします。マージツールの実行中にエラーが発生しました。マージツールの実行中にエラーが発生しました。すべての競合をそのままにします。post-commit フックの実行中にエラーが発生しましたpost-lock フックの実行中にエラーが発生しましたpost-unlock フックの実行中にエラーが発生しました属性 %s を設定中にエラーが発生しました: ディレクトリのロック解除中にエラーが発生しました (詳しい理由は以下のとおりです):'%s' のサーバ証明書の認証中にエラーが発生しました: プロセス '%s' を待っている際にエラーが発生しました'%s' の entries ファイルに書き込み中にエラーが発生しました'%s' にハッシュを書き込む際にエラーが発生しました'%s' のログを書いている際にエラーが発生しましたストリームへの書き込み中にエラーが発生しました: 予想外の EOF です'%s' に書き込み中にエラーが発生しました'%s' への書き込み中にエラーが発生しました: 予想外の EOF ですファイルの引数が 1 つだけ必要です属性名とファイルの引数が 1 つだけ必要です次のプレフィックスをもつノードを取り除きます (空になったリビジョンは落とします): 次のプレフィックスをもつノードを取り除きます: '%s' はディレクトリだと期待されましたが、実際に見つかったのはファイルです'%s' はファイルだと期待されましたが、実際に見つかったのはディレクトリです'revprops' を期待しましたが、'%s' が見つかりました期待されるファイルシステム形式は '%d' ですが、実際の形式は '%d' です期待されるファイルシステム形式は 1 から '%d' の間ですが、実際の形式は '%d' です正しいリビジョン番号やパスを期待しました現在のリビジョンは %ld 以下であることが期待されましたが、実際に見つかったのは %ld です期待されるリポジトリ形式は '%d' または '%d' ですが、実際の形式は '%d' です正しいリビジョン範囲を期待しました有効期限: %s 対象を引数で明示することが必要です対象の明示的な指定が必要です ('%s' は属性値と解釈されました)エクスポートが終わりました。 外部項目 (リビジョン %ld) をエクスポートしました。 リビジョン %ld をエクスポートしました。 リビジョン %ld の外部項目です。 外部項目のチェックアウトが終わりました。 外部項目のエクスポートが終わりました。 外部項目の更新が終わりました。 ディレクトリ '%s' を追加できませんでした: ディレクトリ以外の同名のオブジェクトが既にありますディレクトリ '%s' を追加できませんでした: バージョン管理下におかれた同名のディレクトリが既にありますディレクトリ '%s' を追加できませんでした: バージョン管理下におかれていない同名のディレクトリが既にありますディレクトリ '%s' を追加できませんでした: コピー元の引数がサポートされていませんディレクトリ '%s' を追加できませんでした: 同名の管理用ディレクトリと同じ名前のオブジェクトですファイル '%s' を追加できませんでした: ファイル以外の同名のオブジェクトが既に存在します'%s' の MD5 ダイジェストを計算できませんでしたService Control Manager に接続できませんでしたwinservice_start_event を作成できませんでしたメモリへのマップ '%s' を削除できませんでしたWebDAV PROPPATCH を実行できませんでしたロックの情報を取得できませんでしたURL '%s' にラベル '%s' は見つかりませんでしたリビジョン %ld の日時が見つかりませんでしたリポジトリへの排他的なアクセスを取得できませんでした。おそらく httpd, svnserve, svn などといった他のプロセスがリポジトリを開いてしまったのでしょう。同期先リポジトリのロックを取得できませんでした。現在 '%s' が所持しています 新しい文字列キーを取得できませんでしたファイルシステム形式 '%s' のモジュールをロードできませんでしたディスクから属性をロードできませんでした作業コピー内に 'copyfrom' パスが見つかりませんでした'%s' に「欠如」マークをつけられませんでした: 同名の項目が既に追加準備されていますURI '%s' をパースできませんでした'%s' を元に戻せませんでした -- 復元でなく更新をしてみてください。 '%s' フックを実行できませんでした。シンボリックリンクが壊れています'%s' フックを実行開始できませんでした十分な量をストリームに書き込むのに失敗しました更新されたファイルを書き込めませんでしたプラグインをロードできませんでした'%s' を開けませんでした表現 '%s' を読み込めませんでしたファイル '%s' は既に存在していますファイル '%s' の MIME タイプ属性はバイナリですファイル '%s' は改行文字が一貫していませんファイル '%s' にはローカルでの変更が加えられていますファイル '%s' (ディレクトリ '%s' 内のもの) はバージョン管理されていないリソースですファイル '%s' はリポジトリ側と比べて古くなっていますファイル '%s' はリポジトリ側と比べて古くなっています。update を実行してみてくださいファイルが既に存在します: ファイルシステム '%s', リビジョン %ld, パス '%s'ファイルが既に存在します: ファイルシステム '%s', トランザクション %s, パス '%s'ファイルは変更できません: ファイルシステム '%s', リビジョン %ld, パス '%s'ファイルが見つかりません: リビジョン %ld, パス '%s'ファイルが見つかりません: トランザクション %s, パス '%s'ファイルまたはディレクトリ '%s' はリポジトリ側と比べて古くなっています。update を実行してみてくださいファイルシステムのディレクトリにはそのようなエントリはありませんファイルシステムに項目がありませんそのようなコピーはファイルシステムにありませんそのようなロックはファイルシステムにありませんファイルシステムにそのような基点ノードレコードはありませんファイルシステムにそのようなノードリビジョン識別番号はありませんそのような表現はファイルシステムにありませんそのような文字列はファイルシステムにありませんファイルシステムが既に開いていますファイルシステムが壊れていますファイルシステムが開いていませんファイルシステムのオブジェクトが既に開いていますファイルシステム内のオブジェクトはまだ開いていませんファイルシステムのパス '%s' はファイルでもディレクトリでもありませんファイルシステムのアップグレードはサポートされていません指定されたプレフィックスをもつノードをダンプストリームから取り除きま す。 使用方法: svndumpfilter exclude <パスのプレフィックス>... 指定されたプレフィックスをもたないノードをダンプストリームから取り除 きます。 使用方法: svndumpfilter include <パスのプレフィックス>... リビジョンファイルの最終行が 64 bytes 以上ですリビジョンファイルの最終行に空白文字がありません'%s' の 1 行目に数字以外が含まれています最初のリビジョンが 2 以上であることはありませんformat ファイル '%s' に予想外の非数字が含まれています属性 svn:externals の形式が不正です作業コピーのパスが見つかりましたリビジョンファイルで不正なヘッダが見つかりましたパイププロトコルのフレーミングエラーですGET リクエストが失敗しました: %d %s一般的なファイルシステムエラーですadd-file 要素や open-file 要素を先に使っていないのに apply-textdelta 要素を使っています属性削除用の cdata の内容がありますディレクトリを開かずに close-directory 要素を使っていますadd-file 要素や open-file 要素を先に使っていないのに close-file 要素を使っています'%s' は、ソースパスはありますがソースリビジョンがありません認識できないエンコーディングを取得しました: '%s'HTTP パスが見つかりませんリポジトリの URL '%s' が不正ですSubversion リポジトリの URL '%s' が不正です要求された操作の対象が不正ですサーバから送られてきたリポジトリのルートが長すぎます相対 URL '%s' は不適切です現在のディレクトリ: '%s'次のプレフィックスをもつノードを残します (空になったリビジョンは落とします): 次のプレフィックスをもつノードを残します: ライブラリのバージョンは互換性がありません不完全なデータです不完全なロックデータが返されました不完全または未終了の属性ブロックです改行文字形式が一貫していません不正な引数が与えられました不正なパラメータが指定されました見出しSSPI ライブラリの初期化に失敗しました入出力エラーです未知の機能に関する問い合わせです参照リポジトリの変更は、異なるリポジトリの間ではできません内部エラーです: MERGE レスポンス中の 'DAV:response' 要素について、不明な親 (%d) があります不正な属性 %s が '%s' に設定されています: 対象 '%s' が絶対パスであるか、または '..' を含んでいます'conflict_result' の引数が不正です'format' 属性が不正です'%s' は不正な URL ですURL が不正です: プロキシのポート番号の値が不正な文字ですURL が不正です: プロキシのポート番号が負ですURL が不正です: プロキシのポート番号が TCP のポート番号の最大値 65535 以上ですdiff のオプションに不正な引数 '%s' があります認証設定が不正ですリビジョンファイルに不正な変更種別があります変更順序が不正です: ノードリビジョン識別番号を削除せず新しく追加しています変更順序が不正です: 削除したパスに対して、追加ではない変更をしています変更形式が不正ですリビジョンファイルに不正な changes 行がありますリビジョン範囲リストに不正な文字 '%c'が見つかりましたリビジョンリストに不正な文字 '%c' が見つかりました設定が不正です: デバッグマスクの値が不正な文字です設定が不正です: タイムアウトの値が不正な文字です設定が不正です: タイムアウトの値が負です不正な設定です: PKCS#11 プロバイダ '%s' をロードできません不正な設定です: 証明書ファイル '%s' をロードできません設定が不正です: '%s' は未知の HTTP ライブラリです設定が不正です: 未知の HTTP 認証形式です: '%s'設定値が不正です不正な制御文字 '0x%02x' がパス '%s' にありますコピー元のパス '%s' が不正です。レスポンス内の作成日時ヘッダの値が不正です。深さの指定 (%c) が不正です (パス: '%s')diff ストリームが不正です: [新規] インストラクション %d が新規データセクションから溢れていますdiff ストリームが不正です: [ソース] インストラクション %d がソースビューから溢れていますdiff ストリームが不正です: [対象] インストラクション %d が対象ビューの位置を超えていますdiff ストリームが不正です: インストラクション %d をデコードできませんdiff ストリームが不正です: インストラクション %d の長さが正でありませんdiff ストリームが不正です: インストラクション %d が対象のビューから溢れていますエディタのアンカリングが不正です。 入力パスのうち少なくとも一つがディレクトリではなく、ソースエントリがありません終了リビジョン '%ld' が不正ですエントリ終端文字が不正ですエスケープ文字列が不正ですエスケープされた文字が不正です編集中に不正なファイルまたはディレクトリのトークンがありましたファイルシステムのパスの構文が不正です。ファイルシステムのリビジョン番号が不正です。ファイルシステムのトランザクション名が不正です。文字列を読み込もうとしましたが、長さ (%%%s) が不正ですロックが不正です現在の作業ディレクトリに対する操作が不正ですオプションが不正です。 オプションが不正です。属性の衝突に基づいた選択ができません。 オプションが不正です。バイナリファイルの衝突に基づいた選択ができません。 オプションが不正です。バイナリファイルの衝突は表示できません。 オプションが不正です。属性の衝突は表示できません。 オプションが不正です。元々のファイルが利用できません。 オプションが不正です。差分をとる対象となる、マージされたバージョンがありません。 オプションが不正です。編集対象となる、マージされたバージョンはありません。 リビジョンファイルに不正な prop-mod フラグがあります参照リポジトリの変更が不正です作業コピーのトップレベルについての報告が不正です'%ld' というリビジョン番号は不正ですリビジョン番号が不正です (%ld)'%s' をパース中に不正なリビジョン番号が見つかりました与えられたリビジョン番号が不正ですリビジョン識別子が不正です準備内容が不正ですdated-rev リクエストへのサーバのレスポンスが不正です開始リビジョン '%ld' が不正ですスイッチが不正です対象のパスが不正ですリビジョンファイルに不正な text-mod フラグがありますタイムアウトの値が不正ですノードのリビジョンマージ情報数が不正な値 (%%%s) ですフィールド '%s' の値が不正です'%s' の entries ファイルのバージョン行が不正です項目は既にファイルシステムに存在しています項目が読み込み可能でありません項目が書き込み可能でありません項目はリポジトリ側と比べて古くなっています項目の一部だけが読み込み可能です繰り返しをすべて実行し終える前に途中で終了してしまいましたキャッシュ内に種別のない noderev があります最終変更者: %s 最終変更日時最終変更リビジョン: %ld ローカルで修正されたファイルやバージョン管理下にないファイルを残しました改行文字が期待されるものと異なりますファイル・ディレクトリ・リビジョンの属性を一覧表示しま す。 使用方法: 1. proplist [<対象>[@]...] 2. proplist --revprop -r [<対象>] 1. 作業コピー内にあるバージョン管理下の属性を一覧表示します。 を指定す ると、リビジョン での <対象> をまず探します。 2. リポジトリのリビジョン に関する、バージョン管理下にないリモートの 属性を一覧表示します。 <対象> には、アクセスするリポジトリを決める意味しかありません。 リポジトリ内のディレクトリのエントリを一覧表示します。 使用方法: list [<対象>[@]...] 各 <対象> ファイルおよび各 <対象> ディレクトリの内容を、ディレクトリにある とおり一覧表示します。<対象> が作業コピーのパスである場合は、対応するリポジ トリ URL が処理に用いられます。 デフォルトの <対象> は '.'、つまり現在作業中のディレクトリのリポジトリ URL です。 を指定すると、リビジョン での <対象> をまず探します。 --verbose をつけると、各項目に次のようなフィールドが表示されます: 最後のコミットのリビジョン番号 最後のコミットの変更者 ロックされている場合には、文字 'O'。(詳細を見るには 'svn info ' を使 用してください) (バイト単位での) サイズ 最後のコミットの日時 ローカルの URL '%s' にホスト名しか含まれていません。パスが必要ですローカルの URL '%s' に含まれているホスト名はサポートされていませんローカルの URL '%s' にプレフィックス 'file://' が含まれていませんローカルの、コミットを伴わない操作にログメッセージやリビジョン属性はつけられませんlocation エントリがリストではありませんlocation segment エントリがリストではありませんロックロック作成日時ロック有効期限ロック所有者: %s ロックトークン: %s ロックについてのコメントにゼロバイト文字が入っていますロックについてのコメントに不正な文字が含まれていますロックについてのコメントのファイルがバージョン管理されているファイルです。無効にするには '--force-log' を用いてくださいlock 要素がリストではありませんロックが失敗しました: '%s' の新しいバージョンが存在しますロック用のファイル '%s' は正常なファイルではありませんロックは有効期限が切れましたロックのリクエストが失敗しました: %d %slock レスポンスがリストではありませんロックトークンが不正です作業コピーのパスまたはリポジトリの URL をロックし、他のユーザがそれらへ の変更をコミットできないようにします。 使用方法: lock <対象>... 他のユーザや作業コピーからロックを奪うには --force を用いてください。 ログコマンドはディレクトリ '%s' には実行できませんログエントリに 'name' 属性がありません (エントリ: '%s', ディレクトリ: '%s')log エントリがリストではありませんログメッセージにゼロバイト文字が入っていますログメッセージファイルがバージョン管理されているファイルです。無効にするには '--force-log' を用いてくださいログパスエントリが文字列ではありませんログのリビジョン属性エントリが文字列ではありませんMD5 チェックサムがありませんMIME タイプ '%s' に不正な文字 '%c' が含まれていますMIME タイプ '%s' には '/' が含まれていませんMIME タイプ '%s' はメディア形式 (media type) が空ですリポジトリの URL が不正ですUUID '%s' が不正ですXML が不正です: %s (行 %ld)node-rev に不正な 'copyfrom' 行がありますnode-rev に不正な 'copyroot' 行があります不正なダンプファイルヘッダですダンプストリームが不正です。リビジョン 0 にはノードのレコードが含まれていてはいけませんエラーリストが不正ですファイルが不正ですネットワークデータが不正です表現ヘッダが不正ですスケルトンデータが不正です異常なストリームデータです表現に不正 svndiff データがありますnode-rev に不正な text rep offset 行がありますコミット中にマージの競合がありましたマージ情報の修正とともに別のリポジトリからのマージをすることはできませんマージ元が必要ですマージ経路:mergeinfo 要素がリストではありません'%s' のマージ情報が空のリビジョン範囲にマップされていますマージ情報のパースエラーです作業コピーアンワインドスタックに対してポップする際に不一致がありますファイルシステムモジュール '%s' のバージョンが一致しません: 実際 %d.%d.%d%s, 期待 %d.%d.%d%s'%s' 用 RA のバージョンが一致しません: 実際 %d.%d.%d%s, 期待 %d.%d.%d%s'%s' には 'dest' 属性がありません'%s' には 'left' 属性がありません'%s' には 'revision' 属性がありません'%s' には 'right' 属性がありません'%s' には 'timestamp' 属性がありません'%s' (リビジョン %ld) には変更パス情報がありませんadd-directory 要素に copyfrom-rev 属性がありませんadd-file 要素に copyfrom-rev 属性がありませんnode-rev に cpath がありませんデフォルトのエントリがありません'%s' の wcprops ファイルに行末文字がありませんエントリ終端文字がありませんnode-rev に ID 情報がありませんnode-rev に種別情報がありませんマージ元のパス '%s' がありません; --skip-missing-merge-sources をつけて実行してみてください%s 要素に name 属性がありませんabsent-directory 要素に name 属性がありませんabsent-file 要素に name 属性がありませんadd-directory 要素に name 属性がありませんadd-file 要素に name 属性がありませんdelete-entry 要素に name 属性がありませんopen-directory 要素に name 属性がありませんopen-file 要素に name 属性がありませんremove-prop 要素に name 属性がありませんrevprop 要素に name 属性がありませんset-prop 要素に name 属性がありませんnode-rev の node-id がありませんパスが引数に指定されていませんresource 要素に path 属性がありません引数に属性名とリポジトリパスがありません属性名が引数に指定されていません引数に属性名かリポジトリパスがありませんリポジトリパスの引数が指定されていません必要なノードリビジョン識別番号がありません必要なリビジョン指定がなされていませんopen-directory 要素に rev 属性がありませんopen-file 要素に rev 属性がありませんtarget-revision 要素に rev 属性がありませんリビジョンが欠落していますdelete-entry 要素に rev 属性がありませんopen-directory 要素に rev 属性がありませんopen-file 要素に rev 属性がありませんopen-root 要素に rev 属性がありませんtarget-revision 要素に rev 属性がありません変更変更: %s 変更: %s%sローカルディスク上のリポジトリにアクセスするモジュール。svn ネットワークプロトコルを使ってリポジトリにアクセスするモジュール。svn ネットワークプロトコルを使ってリポジトリにアクセスするモジュール。 - Cyrus SASL 認証を併用Neon を利用して WebDAV (DeltaV) プロトコルでリポジトリにアクセスするモジュール。serf を利用して WebDAV (DeltaV) プロトコルでリポジトリにアクセスするモジュール。Berkeley DB リポジトリを扱うためのモジュール。プレインファイル (FSFS) リポジトリを扱うためのモジュール。作業コピー内やリポジトリ内の何かについて、移動や名前 の変更を行います。 使用方法: move <移動元>... <移動先> 複数の <移動元> を移動する場合、それらは <移動先> の子ノードとして追加される ので、<移動先> はディレクトリでなければなりません。 注意: このサブコマンドは 'copy' してから 'delete' するのと同等です。 注意: --revision オプションは何の役にも立ちません。これは廃止予定です。 <移動元> と <移動先> の両方とも、作業コピー (WC) のパスと URL のうち一方で す: WC -> WC: (履歴をもたせたまま) 移動して追加準備状態にします URL -> URL: 完全なサーバサイドの名前変更です <移動元> はすべて同じ種別でなければなりません。 作業コピー・リポジトリ間の移動はサポートされていませんパスを他の変更リストに移動中です複数のリビジョン引数が指定されています。-c を 2 つ指定したり -c と -r の両方を指定したりはできません複数のリビジョン引数が指定されています。'-r -r ' の代わりに '-r :' を使ってみてくださいmemcache サーバ '%s' にホストとポートを指定してくださいリビジョン属性を編集する際には、番号・日時・'HEAD' のいずれかでリビジョンを指定しなければなりません互いに排他的な引数が指定されています名前がファイルシステムのディレクトリを参照していません名前がファイルシステムのファイルを参照していません名前は一階層のパス成分ではありません名前: %s svn_fs_lock に渡された有効期限の値が負です'%s' をパース中に負のリビジョン番号が見つかりましたNeon は URL '%s' をパースできませんネットワーク接続が突然切られましたネットワークの読み込み / 書き込みエラーですネットワークソケットを初期化できませんでしたファイルのインポートをするときは新しいエントリ名が必要です'.' エントリはありません: '%s'利用できる認証ファイルパスがありません利用できる認証供給者がありません属性 '%s' は '%s' では変更されませんでした 属性 '%s' はリビジョン %ld では変更されませんでした リポジトリにコミット内容がありません共通の親が見つかりません。互いに無関係の引数に対する操作はできません識別番号 '%s' をもったコピーはファイルシステム '%s' にありません作成されたパスがありませんディレクトリ '%s' にデフォルトのエントリはありませんエディタが見つかりません。エディタが見つかりません。すべての競合をそのままにします。利用できる外部エディタがありません利用できる外部マージツールがありませんfetch_func が update_editor に与えられていませんパス '%s' (ファイルシステム '%s') にはロックがかけられていませんロックトークンが指定されていませんマージツールが見つかりません。 マージツールが見つかりません。すべての競合をそのままにします。パス '%s' のどの部分も、リポジトリの HEAD には見つかりませんでしたロックを解除するパスが指定されていませんノード ID '%s' (ファイルシステム '%s') の 'node-origins' テーブルにはレコードがありませんそのような XML タグ属性は存在しませんそのようなエントリはありません: '%s''%s' という表現はありませんリビジョン %ld はありませんリビジョン %ld はファイルシステム '%s' にはありませんそのようなトランザクションはありませんパス '%s' (ファイルシステム '%s') にトークンは指定されていません'%s' という名前のトランザクションはファイルシステム '%s' にありませんどのユーザもファイルシステムと関係ありませんどのユーザ名も現在ファイルシステム '%s' と関係ありませんフィルタ通過後のストリーム中に適切なコピー元リビジョンがありませんフィルタ通過後のストリーム中に適切なリビジョン範囲 'end' がありませんフィルタ通過後のストリーム中に適切なリビジョン範囲 'start' がありませんバージョン管理された親ディレクトリがありません'%s' には書き込み用のロックがかけられていませんノード種別: ディレクトリ ノード種別: ファイル ノード種別: なし ノード種別: 不明 '%s' の基点ノードはファイルシステム '%s' に存在していますが、値 (%s) が、保存しようとしていた値 (%s) と異なります'%s' の基点ノードは存在していますが、値 (%s) が、保存しようとしていた値 (%s) と異なりますノードリビジョン #'%s' にはマージ情報があることになっていますが、ありませんノードリビジョン '%s' にはマージ情報があることになっていますが、ありませんノードリビジョン '%s' の下にはマージ情報を持つツリーがあることになっていますが、このノードリビジョンはディレクトリではありませんノードリビジョン '%s@%ld' にはマージ情報があることになっていますが、ありませんASCII 以外の文字 (コード %d) が検出されました。この文字は UTF-8 へは、 あるいは UTF-8 からは、変換できません-c の引数に変更として数値以外 (%s) が指定されています--limit の引数に数値以外が指定されていますファイルの一部に文字列以外が含まれています環境変数 SVN_EDITOR、VISUAL、EDITOR のどれも設定されていなく、実行時の設定オプション 'editor-cmd' も見つかりません必要なリビジョンがすべては指定されていません編集用ルートパスを開く操作が認証されていません十分な引数が与えられていません十分な引数が与えられていません表現が空ですが、オフセットは既にゼロを越えています数値が最大値を超えていますオブジェクトがリビジョンルートではありませんオブジェクトがトランザクションルートではありません更新が妨害されましたr%ld:%ld を '%s' にマージする際に 1 つ以上の競合が発生しました。 マージされずに残っているリビジョンの変更を適用するために、 すべての競合を解決してマージを再度実行してください今のところ、パスのテキストベースと作業ファイルの差分しかサポートされていませんリビジョンの指定は 1 つだけしかできませんURL の後の引数で指定できるのは相対パスだけですバイナリファイルには適用できない操作ですディレクトリに対しては操作を適用できません複数のコピー元 (または移動元) が操作でサポートされていませんオプション --tunnel-user はトンネルモードでのみ有効です。 指定されたファイルや URL の内容を、リビジョンと変 更者の情報を行内に含めて出力します。 使用方法: blame <対象>[@]... を指定すると、リビジョン での <対象> をまず探します。 指定されたファイルや URL の内容を出力します。 使用方法: cat <対象>[@]... を指定すると、リビジョン での <対象> をまず探します。 所有者: %s トークン "%s" 用の PIN がスロット "%s" にあります'%s' のパスフレーズ: '%s' のパスワード: パス '%s' は既に存在していますパス '%s' は存在しませんパス '%s' がリビジョン %ld に存在しませんパス '%s' は HEAD リビジョンに存在しませんパス '%s' はリビジョン %ld に存在しませんパス '%s' は '%s' で終わっています。これはこの操作ではサポートされていませんパス '%s' にはコミットされたリビジョンがありませんパス '%s' はユーザ '%s' によって既にロックされています (ファイルシステム '%s')パス '%s' はもう変更リストに属していません。 パス '%s' は URL ではありませんパス '%s' はディレクトリではありませんパス '%s' はファイルではありませんパス '%s' は作業コピーにはありませんパス '%s' は変更リスト '%s' に属しています。 パス '%s' はロックされていません。 パス '%s' はディレクトリ '%s' の直接の子ノードでなければなりませんパス '%s' が HEAD リビジョンに見つかりませんパス '%s' がリビジョン %ld に見つかりませんパス '%s' は存在しませんパスにロックトークンがありませんパスは既にロックされていますパスが文字列でありませんパスは作業コピーのディレクトリではありませんパスが作業コピーのファイルでありませんパスが、指定されたディレクトリの直接の子ノードではありませんパスはロックされていませんこの操作ではパスの構文はサポートされていませんパス: %s パス名の末端に ':' がついていません'yes' または 'no' を入力してください: サーバからの送信内容において EOF が現れるのが早すぎますダンプストリーム中のデータが途中で途切れています作業コピー中の最初のログエントリに問題がありますログの実行中に問題が起きましたプロセス '%s' は失敗しました (終了理由 %d)プロセス '%s' はエラー終了コード %d を返しましたprop diffs 要素がリストではありません'%s' の属性: 属性 '%s' はエントリ属性です属性 '%s' はまともな属性ではありません属性 '%s' がパス '%s' に見つかりません (リビジョン: %ld)属性 '%s' がパス '%s' に見つかりません (トランザクション: %s)属性 '%s' がリビジョン %ld に見つかりません属性が見つかりませんproplist 要素がリストではありませんプロトコルエラーです: リソース '%s' についての MERGE レスポンスでは、要求した (そしてコミットを終えるのに必要な) 属性すべてが返されませんでしたプロトコルエラーです: どんなリソースに対しても自動的なマージはしないようにサーバに命令しましたが、サーバによると '%s' はマージされましたファイルやディレクトリをバージョン管理下におき、それらをリポジトリに追加 予定の状態とします。次回のコミットでそれらは追加されます。 使用方法: add <パス>... エラーに対して Python の例外が設定されましたマージ情報のクエリには FSFS ファイルシステムスキーマのバージョン %d が必要となります。ファイルシステム '%s' で使用されているのはバージョン %d ですRA 層は、リクエストした OPTIONS 情報を受け取ることができませんでしたRA 層は HTTP リクエストの作成できませんでしたRA 層は属性を取得できませんでしたRA 層はソケット層を開始できませんでしたRA 層のファイルは既にありますRA 層のリクエストが失敗しましたREPORT レスポンスの処理はエディタの実行を終えるのに失敗しましたリビジョン パス -------- ---- リビジョン パス -------- --------- 固有の名称を使い果たしました改行文字に達する前にリビジョン範囲リストのパースが終了しました編集用ルートパスへの読み込みアクセスが拒否されましたパイプの読み込みエラーです'%s' を読んでいます標準入力からの読み込みが許可されていません表現の終点を越えて 1 つの svndiff window を読んでいます復旧時に差分化されたディレクトリ表現が見つかりました復旧時にディレクトリでないノードが見つかりました作業コピーの掃除・ロックの解除・未完了の操作の再開などを再帰的に行い ます。 使用方法: cleanup [<パス>...] 存在しないノード '%s' への参照がファイルシステム '%s' にあります現在のリポジトリでは、相対ソースリビジョン %ld は利用できませんrelocate は、URL のリポジトリ部分しか変更できません作業コピー内やディレクトリ内の「競合」状態を取り除きます。 使用方法: resolved <パス>... 注意: このサブコマンドは、意味的に競合を解消したり競合マーカーを取り除いた りするわけではありません。単に、競合に際して機械的に作り出されたファイルを 削除し、<パス> を再びコミットできるようにするだけです。現在ではこのコマンド は非推奨となり、代わりに 'svn resolve --accept working' を実行することが推 奨されています。 ファイル・ディレクトリ・リビジョンから属性を削除します。 使用方法: 1. propdel <属性名> [<パス>...] 2. propdel <属性名> --revprop -r <リビジョン> [<対象>] 1. 作業コピー内にあるバージョン管理下の属性を削除します。 2. リポジトリのリビジョンに関する、バージョン管理下にないリモートの属性を削 除します。 ファイルやディレクトリをバージョン管理から外します。 使用方法: 1. delete <パス>... 2. delete ... 1. <パス> で指定された各項目を、次回のコミット時に削除するよう準備します。 --keep-local オプションを与えない限り、これまでにコミットされていないファ イルやディレクトリは直ちに作業コピーから削除されます。<パス> が指し示す項 目もしくはそれに含まれる項目のうち、バージョン管理下におかれていなかった ものや修正を受けたものについては、--force オプションが与えられない限り削 除されません。 2. で指定された場合、すぐにコミットが行われ各項目がリポジトリから削除 されます。 フィルタをかけたために空になったリビジョンを取り 除きます。'%s' のロックを解除しました。 '%s' を変更リスト '%s' から削除しています。フィルタをかけた後に残ったリビジョンに番号をふり なおします。表現 '%s' は変更不可能でもなくフルテキストでもありません表現 '%s' は変更できません表現の内容が大きすぎます: 現状 %s, 限度 %s置換しています %s リポジトリのルート: %s インポート時に必要となるリポジトリ URLリポジトリの UUID '%s' が、期待される UUID '%s' と一致しませんリポジトリの UUID が期待される UUID と一致しませんリポジトリ UUID: %s この操作ではリポジトリへのアクセスが必要です。リポジトリアクセス方法が実装されていませんリポジトリの引数が必要ですリポジトリの引数が必要です リポジトリの作成に失敗しましたリポジトリは移動しましたリポジトリに UUID がありませんリポジトリが、リビジョン属性を変更できるようにはなっていません。 管理者に pre-revprop-change フックを作成するよう頼んでくださいリポジトリのロックを取得しました。 お待ちください。リポジトリの復旧にはいくらか時間がかかります... リポジトリのロックを取得しました。 お待ちください。リポジトリのアップグレードにはいくらか時間がかかります... リポジトリは恒久的に '%s' へ移動しました。relocate (参照 URL の変更) を実行してくださいリポジトリは一時的に '%s' へ移動しました。relocate (参照 URL の変更) を実行してくださいリポジトリのアップグレードはサポートされていません表現は書き込み中です表現が 'delta' 形式ではありません要求された深さ 'exclude' はサポートされていませんコマンドライン引数に予約されたディレクトリ名が含まれています'%s' の競合状態を解消しました 作業コピーのファイルを元に戻します (ローカルでの編集の大半を取り消し ます)。 使用方法: revert <パス>... 注意: このサブコマンドは、ネットワークへのアクセスを必要とすることなくあら ゆる競合状態を解消します。しかし削除されたディレクトリの復旧はしません。 '%s' を元に戻しました '%s' ではマージ情報の取得はサポートされていません'%s' を元に戻しました リビジョン %ld を %ld としてコミットしました。 リビジョン %ld が、対象において現存するリビジョン %ld と一致しません (対象: '%s')リビジョン %ld において、revprops ファイルがあるべき場所にファイル以外のものがありますリビジョン %ld には revs ファイルはありますが revprops ファイルがありませんリビジョン %ld を飛ばしました。 現在コピー中のリビジョン (%ld)、最後にマージされたリビジョン (%ld)、同期先の HEAD (%ld) が食い違っています。svnsync を用いずに同期先リポジトリにコミットしたのではありませんか?revision エントリがリストではありませんリビジョンファイルの末尾に改行がありませんこの操作ではリビジョン属性 '%s' を使ってはなりませんリビジョン属性のペアが空ですリビジョン範囲は適用できませんリビジョン形式には URL ではなく作業コピーパスが必要となります。リビジョン: %ld リビジョンは、最新のリビジョン (%ld) よりも大きくてはいけません以下のようにリビジョン番号がふりなおされました: リビジョン変更ルートオブジェクトはトランザクションルートでなければなりませんSQLite のエラーですSSL はサポートされていません安全なデータ '%s' の後に ASCII 以外のバイト %d があります。UTF-8 へは、あるいは UTF-8 からは、変換できません準備中の処理: 追加 準備中の処理: 削除 準備中の処理: 特になし 準備中の処理: 置換 memcache サーバ '%s' ではスコープが許可されていません2 つ目のリビジョンが必要です選択: 延期 (p)選択: 延期 (p), 完全自分 (mf), 完全他人 (tf), ヘルプ (h) :作業コピーからリポジトリに変更点を送信します。 使用方法: commit [<パス>...] ログメッセージが必須ですが、その中身は空でもかまいません。--message か --file オプションによってログメッセージを与えない場合、エディタが起動します。 対象の中にロックされた項目がある場合、コミット成功後にそれらのロックが解除 されます。 送信しています %s サーバの SSL 証明書が信頼できませんサーバが再生 (replay) できるのはリポジトリルートからだけですサーバがリポジトリのルートを送信しませんでしたlog 経由でのカスタムリビジョン属性の取得がサーバでサポートされていません日時を使った操作をサーバがサポートしていません編集のパイプライン化がサーバでサポートされていませんロック機能をサーバがサポートしていませんリポジトリルートに関する情報の取得をサーバがサポートしていませんコミット時に任意のリビジョン属性を設定するのをサーバがサポートしていませんロック取得 (get-lock) コマンドをサーバがサポートしていませんロック (lock) コマンドをサーバがサポートしていません再生 (replay) コマンドをサーバがサポートしていません範囲再生 (replay-range) コマンドをサーバがサポートしていませんロック解除 (unlock) コマンドをサーバがサポートしていませんサーバでサポートされているのはバージョン %d までのみですバージョン %d 以上をサーバが必要としています期待される deadprop-count 属性がサーバからのレスポンスにありませんサーバが、リクエストへのレスポンスとして予想外の戻り値 (%d %s) を送信してきました (リクエスト: %s, URL: '%s')セッションのルートは '%s' ですが、リポジトリのルートは '%s' です属性 '%s' の新しい値を '%s' に設定しました 属性 '%s' の新しい値をリビジョン %ld に設定しました 属性 '%s' をローカルにない対象 '%s' に設定することはサポートされていませんローカルにない対象 '%s' への属性の設定にはベースとなるリビジョンの設定が必要ですローカルにない対象 '%s' への再帰的な属性の設定はサポートされていません非圧縮データのサイズが、保存されているオリジナルの長さと一致しません行方不明のマージ元は飛ばします。'%s' を飛ばしました 行方不明の対象ファイルは飛ばしました: %s blame はバイナリファイルを扱えないので省略します: '%s' ログメッセージの内容に不正な箇所がありますすみません。まだサポートされていないやり方で svn_client_diff4 が呼び出されましたコピー元 (もしくは移動元) '%s' はディレクトリではありませんコピー元 (もしくは移動元) の URL '%s' は別のリポジトリに由来しています。一緒に扱えない作業コピーのままにしておきますコピー元とコピー先 (または移動元と移動先) は同じリポジトリ内にはないようです (元: '%s'; 先: '%s')コピー元 (もしくは移動元) の URL '%s' は異なるリポジトリに由来するものですクライアントに報告するサーバのエラーを包み込むための特殊なコードです標準の属性については、リビジョン属性の明示的な設定はできません開始リビジョン %ld が終了リビジョン %ld よりも大きくなっています開始リビジョンは終了リビジョンよりも前でなくてはなりません状態の背景となるリビジョン: %6ld まともでない属性 '%s' を格納するのをリポジトリインタフェースが拒否しました。おそらくこれは、使用しているクライアントにバグがあることを意味しています。暗号化されていないパスワードを保存しますか (yes/no)? 文字列がノードやノードリビジョン識別番号を表していません文字列の長さが最大値を超えていますサブコマンド '%s' にはオプション '%s' をつけられません。 使用方法を知りたいときは 'svn help %s' と打ってください。 サブコマンド '%s' にはオプション '%s' をつけられません。 使用方法を知りたいときは 'svnadmin help %s' と打ってください。 サブコマンド '%s' にはオプション '%s' をつけられません。 使用方法を知りたいときは 'svndumpfilter help %s' と打ってください。 サブコマンド '%s' にはオプション '%s' をつけられません。 使用方法を知りたいときは 'svnlook help %s' と打ってください。 サブコマンド '%s' にはオプション '%s' をつけられません。 使用方法を知りたいときは 'svnsync help %s' と打ってください。 サブコマンドに引数が必要です Subversion はバージョン管理用のツールです。 さらに詳しい情報は、http://subversion.tigris.org/ をご覧ください。 編集成功ステータスが返ってくるのが早すぎます継承 ID '%s' (旧 ID: '%s') は既にファイルシステム '%s' に存在していますサブブロックサイズの和がブロック内容のサイズの合計より大きいです差分の要約はリポジトリとリポジトリとの比較にしか使えませんsvndiff 圧縮データが不正ですsvndiff に壊れた window ヘッダが含まれていますsvndiff データに、逆方向にスライドするソースビューが含まれていますsvndiff データに壊れた window が含まれていますsvndiff データに不正な命令が含まれていますsvndiff データが突然途切れましたsvndiff データに不正なヘッダがありますsvndiff に、逆方向にスライドするソースビューが含まれていますsvndiff に不正なヘッダがありますsvndiff のソースの長さが一致していませんシンボリックリンクはこのプラットフォームではサポートされていませんnative-eol の引数 '%s' 中で構文エラーが生じましたリビジョン引数 '%s' で構文エラーが生じましたリビジョン '%s' をパースする際に構文エラーが生じましたdiff の対象に作業コピーのパスと URL を共に含めることはできませんテストが失敗しましたテストを飛ばしましたテキストの最終更新テキスト差分の塊が文字列ではありません%s リクエストに対するレスポンスとして不正な XML が返されました: %s (%s)'%s' 機能にはファイルシステムスキーマのバージョン %d が必要となります。ファイルシステム '%s' で使用されているのはバージョン %d ですCHECKOUT レスポンスに 'Location:' ヘッダが含まれていません環境変数 SVN_EDITOR、VISUAL、EDITOR や実行時の設定オプション 'editor-cmd' の値が空か、または空白文字だけから成っています。値として期待されているのはシェルコマンドです。MERGE 属性レスポンスがエラーステータスを含んでいますOPTIONS レスポンスに、リクエストした activity-collection-set の値が含まれていませんOPTIONS レスポンスに、リクエストした activity-collection-set が含まれていません。これは大抵、その URL で WebDAV が使用可能でないという意味ですOPTIONS レスポンスに、リクエストした baseline-collection の値が含まれていませんOPTIONS レスポンスに、リクエストした checked-in の値が含まれていませんOPTIONS レスポンスに、リクエストした resourcetype の値が含まれていませんOPTIONS レスポンスに、リクエストした version-controlled-configuration の値が含まれていませんOPTIONS レスポンスに、リクエストした version-name の値が含まれていませんPROPFIND レスポンスに、リクエストした resourcetype の値が含まれていません環境変数 SVN_MERGE が空か、または空白文字だけから成っています。値として期待されているのはシェルコマンドです。 URL '%s' のリポジトリルートが親と異なっていますUUID 属性を、リソースやその親に見つけられませんでしたリソースには VCC 属性が見つかりませんでした環境変数 SVN_MERGE も、実行時の設定オプション merge-tool-cmd も設定されていません。 diff の最中にファイル '%s' が突然変更されましたfile-revs レポートにリビジョンが含まれていません以下のリポジトリアクセス (RA) モジュールが利用できます: 以下のリポジトリバックエンド (FS) モジュールが利用できます: 生成されたトランザクション名は長すぎますコマンド get-file-revs がリビジョンを返しませんでしたリポジトリの最新のリビジョンは %ld です。 '%s' (リビジョン %ld) の位置は、リポジトリに存在しないか無関係のオブジェクトを参照していますロックについてのコメントがパス名です (-F のつもりでしたか?)。無効にするには '--force-log' を用いてくださいログメッセージファイルはバージョン管理下にありますログメッセージはパス名ですログメッセージがパス名です (-F のつもりでしたか?)。無効にするには '--force-log' を用いてください操作が中断されましたパスはリポジトリの一部ではありませんでしたrelative-path 属性はリソースには見つかりませんでしたリポジトリ '%s' の UUID は '%s' ですが、作業コピーのものは '%s' ですリポジトリはロックされています。おそらく DB の復旧中ですリクエストのレスポンスに 1 つ以上のエラーが含まれていました仕様に準拠していない HTTP ステータス行がレスポンスに含まれていますルートディレクトリは削除できませんサービスを開始できませんでしたサービスを開始できませんでした。サービス開始時に内部エラーが発生しました指定された差分表示 (diff) オプションはサポートされていません指定されたトランザクションは変更できません既にバージョン管理下にある項目 '%s' があります変更 0 はありません他の人はこの属性の値を '%s' に変更しようとしていますが、あなたは属性を削除しようとしています。 他の人はこの属性を削除しようとしていますが、あなたは属性の値を '%s' に変更しようとしています。 クライアントが古すぎて、作業コピー '%s' を扱うことができません。 もっと新しい Subversion クライアントをインストールするか、作業コピーをダウングレードする必要があります。 詳しくは http://subversion.tigris.org/faq.html#working-copy-format-change を参照してください。単に番号が飛ばないようにするための空のリビジョンです。属性 %s を無効にするには、'svn propdel' を使用してください。 属性の値を '%s' に設定しても無効にはなりません。トークン '%s' はファイルシステム '%s' 内に存在するどのロックも指し示していません与える引数が多すぎますimport コマンドへの引数が多すぎます入れ子になっている項目が多すぎますトランザクション '%s' はリビジョンに基づいていません。おかしいですねトランザクション '%s' はリビジョン '%s' に対して古くなっていますトランザクション '%s' が削除されました。 トランザクションが中断されましたが、掃除が失敗しましたトランザクションの掃除が失敗しましたトランザクションが死んでいますトランザクションが死んでいます: '%s'トランザクションは死んでいませんトランザクションは死んでいません: '%s'トランザクションはリポジトリ側と比べて古くなっていますトランザクションはリポジトリ側と比べて古くなっていますファイルのデータを送信しています '%s' を横断して探索しましたが、環境の深さは見つかりませんでしたバージョン管理下にないリソースにバージョン管理操作を実行しようとしました変更不可な表現を変更しようとしました代わりに 'svn add' または 'svn add --non-recursive' を試してみてくださいより詳しく知りたいときは 'svn help' を試してみてください代わりに 'svn mkdir --parents' を試してみてください代わりに 'svn revert --depth infinity' を試してみてくださいより詳しく知りたいときは 'svnadmin help' を試してみてくださいより詳しく知りたいときは 'svndumpfilter help' を試してみてくださいより詳しく知りたいときは 'svnlook help' を試してみてくださいより詳しく知りたいときは 'svnsync help' を試してみてください新しい属性 '%s' に値 '%s' を設定して追加しようとしています。 しかしその属性は値を '%s' と設定されて既に存在しています。属性 '%s' の値を '%s' から '%s' に変更しようとしています。 しかしその属性はローカルで既に削除されています。属性 '%s' の値を '%s' から '%s' に変更しようとしています。 しかしその属性は値を '%s' と設定されて既に存在しています。属性 '%s' の値を '%s' から '%s' に変更しようとしています。 しかしその属性は値を '%s' と設定されてローカルで追加されています。属性 '%s' の値を '%s' から '%s' に変更しようとしています。 しかしその属性は存在しません。新しい属性 '%s' に値 '%s' を与えて追加しようとしています。 しかしその属性はローカルで既に削除されています。属性 '%s' (値は '%s') を削除しようとしています。 しかしその属性の値は '%s' から '%s' に変更されています。属性 '%s' (値は '%s') を削除しようとしています。 しかしその属性のローカルでの値は '%s' となっています。サポートされていない機能を使おうとしていますトンネルスキーム %s を使うには環境変数 %s が定義されている必要があります対象がないのにトップレベルの報告が 2 つありますバージョン管理下にある 2 つのリソースは関係がありません使用方法を知りたいときは '%s --help' と打ってください。 使用方法を知りたいときは '%s help' と打ってください。 使用方法を知りたいときは 'svnversion --help' と打ってください。 URL '%s' に要素 '..' が含まれていますURL '%s' は頭にスキームがありませんURL '%s' は存在しませんURL '%s' が、対象において現存する URL '%s' と一致しません (対象: '%s')URL '%s' は リポジトリルート URL '%s' の子ノードではありませんURL '%s' は、セッションのリポジトリルート URL '%s' の子ノードではありませんURL '%s' は適切に URI エンコードされていませんURL '%s' は、リビジョン %ld には存在しませんURL '%s' は、そのリビジョンには存在しませんURL '%s' はディレクトリを指していますURL '%s' が参照しているのはファイルです。ディレクトリではありませんURL にスキームがありません: '%s'URL: %s URL にスキームがありません ('%s' および '%s')UUID トークン: %s '%s' というパスの存在を確かめられません'%s' (リビジョン %ld) のトランザクションディレクトリを作成できませんレスポンスヘッダからデータを抽出できません'%s' (リビジョン %ld) のリポジトリの位置が見つかりません認証ファイルの場所が分かりません'%s' をロックできません複数のリポジトリをまたいでのロックやロック解除はできませんディレクトリを作れません'%s' に名前をつけられませんURL に対し ra_local セッションを開始できません読み込み用に認証ファイルを開けません書き込み用に認証ファイルを開けませんリポジトリ '%s' を開けませんでした編集用ルートパスを開けませんURL '%s' をパースできません逆転したリビジョン範囲 '%ld-%ld' をパースできません開始リビジョンと終了リビジョンが同一のリビジョン範囲 '%ld-%ld' をパースできませんトンネルスキーム '%s' は未定義です予想外の EOF がストリーム中にあります内容を書き込む際に予想外の EOF がありましたエントリが突然途切れましたsvndiff 入力が突然途切れました'%s' に予想外の変更不可ノードがあります予想外のノード種別 %d がパス '%s' にあります予想外のノード種別が見つかりました予想外または未知の属性種別です認証に対する予想外のサーバのレスポンスです予想外の '%s' が見つかりました: パスには「行方不明」マークがついています未知のファイルシステム形式です未知のファイルシステム形式 '%s' です未知の XML エンコーディングです: '%s'未知の認証方法ですそのような変更リストはありません'%s' は未知のコマンドです未知のコマンドです: '%s' '%s' のエントリ種別が不明ですサーバに memcache を追加する際にエラーが発生しましたapr_memcache_t を作成する際にエラーが発生しましたmemcache サーバを作成する際にエラーが発生しましたホスト名 '%s' が不明ですキャッシュ内の noderev の種別が不明です: '%c'読み込み中に memcached に未知のエラーが発生しました書き出し中に memcached に未知のエラーが発生しました'%s' のノード種別が不明です表現 '%s' のノード種別が不明ですキャッシュ内に未知のノード種別があります: '%c'パス '%s' の種別が不明または予想外です'%s' は未知またはバージョン管理できない種別ですログコマンドに未知のリビジョン属性の単語 '%s' がありますコマンドへのレスポンス内に未知のステータス '%s' がありますlock コマンドに関するステータスが未知ですunlock コマンドに関するステータスが未知です未知の svn プロトコルコマンドです未知の svn_node_kind ですロック解除ロック解除のリクエストが失敗しました: %d %sunlock レスポンスがリストではありませんロック解除には成功しましたが、post-unlock フックの実行が失敗しました作業コピーのパスまたは URL にかけられたロックを解除します。 使用方法: unlock <対象>... ロックを破壊するには --force を用いてください。 エントリに対してマージできない準備をするよう要求されました読み込み不可能なパスが見つかりました。アクセスを拒否されましたURL スキーム '%s' を認識できません'%s' 用の URL スキームを認識できません認識できないバイナリデータエンコーディングです。デコードできません改行文字形式を認識できません'%s' の改行文字形式を認識できませんログファイルの要素 '%s' を '%s' において認識できません認識できないノード種別です: '%s'ノード '%s' におけるノードアクションを認識できませんストリーム中のレコード形式を認識できません'%s' に要求されたリビジョン形式を認識できません認識できないストリームデータですエラーメッセージが指定されていませんサポートされていないファイルシステム形式ですbdb 用のファイルシステムローダバージョン (%d) はサポートされていませんfsfs 用のファイルシステムローダバージョン (%d) はサポートされていませんra_local 用のリポジトリアクセスローダバージョン (%d) はサポートされていませんra_neon 用のリポジトリアクセスローダバージョン (%d) はサポートされていませんra_serf 用のリポジトリアクセスローダバージョン (%d) はサポートされていませんra_svn 用のリポジトリアクセスローダバージョン (%d) はサポートされていませんRA プラグイン ABI バージョンはサポートされていませんダンプファイルのバージョン %d はサポートされていませんパス '%s' のノード種別はサポートされていません報告された深さ '%s' はサポートされていませんサポートされていないリポジトリのバージョンですサポートされていない作業コピー形式ですキャッシュ内の ID が終端されていませんリビジョン %ld においてバージョン管理されていない属性です: 更新が終わりました。 外部項目をリビジョン %ld に更新しました。 リビジョン %ld に更新しました。 このリポジトリのアップグレードはサポートされていません。データを他の場所へダンプした上でロードしてくださいこのリポジトリの下で使われている、バージョン管理されたファイルシステムのアップグレードはサポートされていません。データを他の場所へダンプした上でロードしてくださいこの制限を無効にするには --force を用いてくださいマージ情報の修正とともに 2 つの URL を使用することはできませんユーザ %s はパス '%s' にロックを所有していません (現在ロックをかけているのは %s です)ユーザ '%s' が、'%s' の所有するロック (ファイルシステム '%s') を使用しようとしていますユーザ名がロック所有者と一致しませんユーザ名: 有効な UTF-8 のデータ (16 進数:%s) の後に無効な UTF-8 文字列 (16 進数:%s) があります強制されないときは値は設定されませんバージョンファイル形式が不正です'%s' のバージョンが一致しません: 実際 %d.%d.%d%s, 期待 %d.%d.%d%s警告: リビジョン %ld のデータを参照していますが、これは、ダンプされた最も古い 警告: リビジョン (%ld ) よりも古いものです。このダンプを空のリポジトリにロード 警告: する操作は失敗するでしょう。 リポジトリにロックがかかるのを待ち続けています。おそらく他のプロセスが リポジトリを開いてしまったのでしょう。 作業コピーのパスを指定する場合、与えてよい対象は一つだけです'%s' のコミットを準備する際にWindows サービスモード (Service Control Manager)作業コピー '%s' はロックされていません作業コピー '%s' はロックされています作業コピーやマージ元に再統合するための仕組みがありません'%s' の作業コピー形式は古すぎます (%d)。もう一度作業コピーをチェックアウトしてください作業コピーが壊れています作業コピーが最新ではありません作業コピーがロックされていません。これはおそらくバグなので、報告してください作業コピーパス '%s' がリポジトリに存在しません作業コピーのテキストベースが壊れています書き込みが拒否されました。リビジョン %ld のすべてを読めるようには認証されていません書き込みエラーです'%s' への書き込み用のロックが奪われました指定する対象の数が間違っています属性値が不正か、あるいは予想外の値です整形済みの XML データではありませんXML パーサが '%s' でパースに失敗しました-d, -i, -t, -X のいずれかを一つだけ指定しなければいけません。 -d, -i, -t, --service, -X のいずれかを一つだけ指定しなければいけません。 .svn/tmp ディレクトリが欠落しているか壊れています。'svn cleanup' を実行してからもう一度試してみてくださいコミットメッセージが一時ファイルに残っていました:[エラー出力を読み込めませんでした。][エラー出力をネイティブのロケールから UTF-8 に変換できませんでした。]途中の親ディレクトリを追加します新しいコピー ID を割り当てています ('next-key' を取得しています)新しいノード ID を割り当てています ('next-key' を取得しています)新しい表現を割り当てています (next-key を取得しています)APR の memcache ライブラリが利用不能です認証が失敗しました認証が失敗しました: %s冗長モードになります作業中のリビジョン (WORKING) についての blame はサポートされていませんコピーキーを次のものに上げていますノード ID のキーを次のものに上げています表現キーを次のものに上げていますリポジトリフックシステムを回避しますリビジョン属性を変更した後にフックを呼び出しますリビジョン属性を変更する前にフックを呼び出しますリビジョンをコミットした後に post-commit フックを 呼び出しますリビジョンをコミットする前に pre-commit フックを 呼び出します'with-revprop' オプションを用いた値の設定はできません ('=' を取り除いてください)変更のカーソルを閉じていますパスワード で同期元リポジトリに接続しますユーザ名 で同期元リポジトリに接続しますパスワード で同期リポジトリに接続しますユーザ名 で同期リポジトリに接続しますサーバに接続できませんでした変更を作成しています文字列を読み込むためのカーソルを作成しています変更を読み込むためのカーソルを作成していますデーモンモード変更を削除しています'copies' テーブルからエントリを削除しています'nodes' テーブルからエントリを削除しています表現を削除しています子ノードを再帰的に辿ります。--depth=infinity に 相当しますログファイルの自動削除を無効にします [Berkeley DB]自動的な属性設定を無効にしますトランザクションコミット時の fsync を無効にしま す [Berkeley DB]このヘルプを表示します更新情報を表示しますデフォルトや svn:ignore 属性が無視するような項目 を無視しません対話式の認証用プロンプト表示をしません認証情報をキャッシュしません履歴を辿るときにコピー以前には遡りません出力の末尾に改行をつけません追加されたファイルに関しては差分を表示しません削除されたファイルに関しては差分を表示しませんコミット後に変更リストを削除しません対象のロックを解除しません完了しました。 増分のみをダンプします自動的な属性設定を有効にしますエクスポートされたものです%s変更を取得しています強制的に処理を実行しますリポジトリの設定ファイルを無効にし、強制的に読み 取り専用にしますロックコメントを含むファイルを強制的に有効にしま すログメッセージを含むファイルを強制的に有効にしま す一般的な使用方法: svnadmin <サブコマンド> <リポジトリパス> \ [<引数やオプション> ...] 特定のサブコマンドに関するヘルプを読みたいときは 'svnadmin help <サブコマンド>' と打ってください。 プログラムのバージョンや FS モジュールを参照するには 'svnadmin --version' と 打ってください。 利用可能なサブコマンド: 一般的な使用方法: svndumpfilter <サブコマンド> [<引数やオプション> ...] 特定のサブコマンドに関するヘルプを読みたいときは、 'svndumpfilter help <サブコマンド>' と打ってください。 プログラムのバージョンを参照するには 'svndumpfilter --version' と打ってくださ い。 利用可能なサブコマンド: 一般的な使用方法: svnlook <サブコマンド> <リポジトリパス> \ [<引数やオプション> ...] 注意: '--revision' や '--transaction' オプションをつけられるどのサブコマンド も、これらのオプションのどちらもついていない場合は、リポジトリの最新の リビジョンに対して作用します。 特定のサブコマンドに関するヘルプを読みたいときは 'svnlook help <サブコマンド>' と打ってください。 プログラムのバージョンや FS モジュールを参照するには 'svnlook --version' と打っ てください。 利用可能なサブコマンド: 一般的な使用方法: svnsync <サブコマンド> <同期先 URL> [<引数やオプション> ...] 特定のサブコマンドに関するヘルプを読みたいときは 'svnsync help <サブコマンド>' と打ってください。 プログラムのバージョンや RA モジュールを参照するには 'svnsync --version' と打っ てください。 利用可能なサブコマンド: リポジトリ UUID を取得しています他の出力と連結するのに適した形式で出力を表示しま すマージを計算するときに項目の系統情報を無視しますストリーム中にリポジトリ UUID があっても無視しま す外部定義を無視しますinetd モード'accept' の引数が不正です作業コピー内にパスを残します現在のリビジョンの代わりに、最後に変更が加えられ たリビジョンを表示します操作の対象を深さ ('empty'、'files'、 'immediates'、'infinity' のいずれか) に限定しま す指定されたホスト名または IP アドレスで待ち受けま す [モード: daemon, listen-once]指定されたホスト名または IP アドレスで待ち受けま す [モード: daemon, service, listen-once]指定されたポートで待ち受けます [モード: daemon, listen-once]指定されたポートで待ち受けます [モード: daemon, service, listen-once]一度だけ待ち受ける (listen-once) モード (デバッ グに便利です)リポジトリ内の指定したディレクトリでロードしますソース URL からマージされていない変更すべてを、 一まとめにしてマージする途中のディレクトリを作成しますマージ済みの印をリビジョンにつけます (-r と共に 用います)表示する履歴エントリの数の最大値表示するログエントリの数の最大値--accept オプションがありませんnext-id ファイルが壊れていますno標準エラー出力に (エラー以外の) 進行状況を出力し ません差分を計算するときに項目の系統情報を考慮します廃止予定です。--depth=files または --depth=immediates を使用してくださいリビジョン属性に対して操作を実行します (-r また は -t と共に用います)リビジョン属性に対して操作を実行します (-r と共 に用います)単一のディレクトリのみに対して (非再帰的に) 操作 を実行します変更リスト に含まれている項目のみに対して 操作を実行します [エイリアス: --cl]XML で出力しますファイル の内容をサブコマンドの引数に追加 して渡します最小限の情報だけを表示しますコピー元に対する差分を表示します付加的な情報を表示します何も表示しないか、要約情報のみを表示します属性 '%s' を '%s' から削除しました。 属性 '%s' をリポジトリのリビジョン %ld から削除しました 属性 '%s' を '%s' に設定しました 属性 '%s' がリポジトリのリビジョン %ld に設定されました ファイル にある設定ファイルを読み込みますファイル からロックについてのコメントを読 み込みますファイル からログメッセージを読み込みますファイル から属性値を読み込みますディレクトリ からユーザ設定ファイルを読み 込みますコピーを読み込んでいますファイルシステムのリビジョンを読み込んでいますノードリビジョンを読み込んでいます表現を読み込んでいますURL を書き換え、参照するリポジトリを変更します変更リストとの関連づけをなくしますソースリポジトリから不要な Berkeley DB ログファ イルを削除します [Berkeley DB]すべてのリビジョン属性を取得しますリビジョン属性 を取得しますリビジョン属性 '%s' は、リポジトリの r%ld では予想外の値です (おそらく誰か他の人が変更したのではないでしょうか?)リビジョン属性 '%s' は、予想外にも、リポジトリの r%ld には存在しません (おそらく誰か他の人が削除したのではないでしょうか?)リビジョン属性 '%s' は、予想外にも、リポジトリの r%ld には存在します (おそらく誰か他の人が変更したのではないでしょうか?)サービスを提供するディレクトリのルートフォアグラウンドで実行します (デバッグに便利です) [モード: daemon]ストリーム中に UUID があればリポジトリに設定しま すリポジトリ UUID を設定しています「名前[=値]」の形式で指定されたリビジョン属性 を新しいリビジョンに設定します結果を要約したものを表示しますコピーに関する詳細を表示しますインデントを使った表現を用いずにフルパスを表示し ますサブコマンドに関するヘルプを表示します各パスについてノードのリビジョン ID を表示しますプログラムのバージョン情報を表示しますパスワードを と指定しますパスワードを と指定します (廃止予定です。 --source-password と --sync-password の説明を参 照してください)ユーザ名を と指定しますユーザ名を と指定します (廃止予定です。 --source-username と --sync-username の説明を参 照してください)ロックについてのコメントを と指定しますログメッセージを と指定しますリビジョン番号を と指定しますリビジョン番号を (または範囲 X:Y) と指定し ますトランザクション名を と指定します表示する一連のリビジョンを指定します ('merged', 'eligible')コピーレコードを保存していますノードリビジョンを保存しています基点ノードレコードを保存しています表現を保存していますトランザクションレコードを保存していますサブコマンドに引数が必要です svn: ロックを解除するには 'svn cleanup' を実行してください (さらに詳しく知りたいときは 'svn help cleanup' と打ってください) svndiff データが、存在しないソースを要求しましたsvndiff がストリームの終点を越えた位置を要求しましたsvndiff window の長さが壊れていますsvnserve のログファイルsvnserve: ルートパス '%s' が存在しないかディレクトリではありません。 svnserve: --service フラグは、プロセスが Service Control Manager によって開始されている場合にのみ有効です。 system('%s') が値 %d を返してきましたリビジョン における変更 (-r -1: と同等) が負の場合は -r :-1 と同等ですサーバからの応答を待っているうちにタイムアウトしました文字エンコーディングが であるとして処理し ます処理をしようとするだけで実際の変更はしませんトンネルモードトンネルのユーザ名 (デフォルトは現在の uid の名 前です) [モード: tunnel]リポジトリ形式: 'fsfs' (デフォルト) または 'bdb'不明です未知の機能です: '%s'使用方法: svn <サブコマンド> [<オプション>] [<引数>] Subversion コマンドラインクライアント, バージョン %s. 特定のサブコマンドに関するヘルプを読みたいときは 'svn help <サブコマンド>' と 打ってください。 プログラムのバージョンや RA モジュールを参照するには 'svn --version' と、バー ジョン番号のみを参照するには 'svn --version --quiet' と、打ってください。 ほとんどのサブコマンドはファイルとディレクトリの一方または両方を引数にとり、 ディレクトリでは再帰的な処理をします。このようなコマンドに引数が与えられなか った場合、デフォルトでは、カレントディレクトリで再帰的な処理をします。 利用可能なサブコマンド: 使用方法: svnadmin crashtest <リポジトリパス> <リポジトリパス> にあるリポジトリを開いてそのまま中断します。すなわち、開い たリポジトリハンドルを握っている間に強制終了する過程をシミュレートします。 使用方法: svnadmin create <リポジトリパス> 空のリポジトリを <リポジトリパス> に新規に作成します。 使用方法: svnadmin deltify [-r <下限>[:<上限>]] <リポジトリパス> 指定されたリビジョン範囲をスキャンし、それらのリビジョンで変更のあったパスに 関して、以前使われていた差分化をします。差分化は、前のリビジョンからの差分の みをリポジトリに格納して、リポジトリを本質的に圧縮します。リビジョンが指定さ れていない場合は、単に HEAD リビジョンを差分化します。 使用方法: svnadmin help [<サブコマンド>...] このプログラムやそのサブコマンドの使用方法を説明します。 使用方法: svnadmin hotcopy <リポジトリパス> <新しいリポジトリパス> リポジトリの優れたコピーを作成します 使用方法: svnadmin list-dblogs <リポジトリパス> Berkeley DB ログファイル全てを一覧表示します。 警告: まだ使用されているログファイルの変更や削除は、リポジトリを壊す原因とな ります。 使用方法: svnadmin list-unused-dblogs <リポジトリパス> 使われていない Berkeley DB ログファイルの一覧を表示します。 使用方法: svnadmin load <リポジトリパス> 「ダンプファイル」形式のストリームを標準入力から読み、リポジトリのファイルシ ステムに新しいリビジョンとしてコミットします。リポジトリがそれまで空だった場 合、その UUID はデフォルトではストリーム中で指定されたものに変更されます。進 行状況のフィードバックは標準出力に送られます。 使用方法: svnadmin lslocks <リポジトリパス> [<リポジトリ内パス>] <リポジトリ内パス> (指定がない場合はリポジトリルート) またはその下のすべての ロックの説明を表示します。 使用方法: svnadmin lstxns <リポジトリパス> コミットされていないトランザクションの名前をすべて表示します。 使用方法: svnadmin recover <リポジトリパス> リポジトリの復旧手続きを実行します。復旧を実行する必要性を知らせるエラーが見 られる場合にこれを実行してください。Berkeley DB の復旧には排他的なアクセスが 必要なので、リポジトリが他のプロセスで利用されている場合は終了します。 使用方法: svnadmin rmlocks <リポジトリパス> <ロックされたパス>... <ロックされたパス> それぞれのロックを無条件に解除します。 使用方法: svnadmin rmtxns <リポジトリパス> <トランザクション名>... 指定されたトランザクションを削除します。 使用方法: svnadmin setlog <リポジトリパス> -r <ファイル> <ファイル> の内容をリビジョン のログメッセージに設定します。リビジョン 属性に関連したフックが動作しないようにするには、--bypass-hooks を用いてくださ い (例えば、post-revprop-change フックからのメールによる通知を必要としない場 合の話です。というのは、リビジョン属性の修正は post-revprop-change で有効とさ れていないからです)。 注意: リビジョン属性の履歴は管理されません。したがってこのコマンドを使うと以 前のログメッセージを上書きします。 使用方法: svnadmin setrevprop <リポジトリパス> -r <名前> <ファイル> <ファイル> の内容を、リビジョン の属性 <名前> に設定します。リビジョン 属性に関連したフックを動作させるには、--use-pre-revprop-change-hook や --use-post-revprop-change-hook を用いてください (例えば、post-revprop-change フックからのメールによる通知を受けたい場合の話です)。 注意: リビジョン属性の履歴は管理されません。したがってこのコマンドを使うと以 前のログメッセージを上書きします。 使用方法: svnadmin setuuid <リポジトリパス> [<新 UUID>] <リポジトリパス> にあるリポジトリのリポジトリ UUID をリセットします。<新 UUID> が与えられている場合は、それを新たなリポジトリ UUID に使用します。与え られていない場合は、リポジトリに全く新しい UUID を生成します。 使用方法: svnadmin upgrade <リポジトリパス> <リポジトリパス> にあるリポジトリを、サポートされている最新のスキーマバージョ ンにアップグレードします。 この機能は、リポジトリ全体のダンプやロードという、高負荷になる可能性がある操 作を行わずに、新しい Subversion の機能を利用できるようにするもので、そのよう なことを望むリポジトリ管理者の利便性のために提供されています。そのため、アッ プグレードでは、リポジトリの完全性を維持しながら目的を実現するのに必要となる 最小量の作業しか行われません。ダンプしたデータをロードすることで達成されるよ うな、最も最適化されたリポジトリ状態になることは、保証されてはいません。 使用方法: svnadmin verify <リポジトリパス> リポジトリに保存されたデータを検証します。 使用方法: svnlook author <リポジトリパス> 変更者を表示します。 使用方法: svnlook cat <リポジトリパス> <ファイルパス> ファイルの内容を表示します。<ファイルパス> を '/' で始めるかは任意です。 使用方法: svnlook changed <リポジトリパス> 変更のあったパスを表示します。 使用方法: svnlook date <リポジトリパス> タイムスタンプを表示します。 使用方法: svnlook diff <リポジトリパス> 変更されたファイルや属性について、GNU スタイルの差分を表示します。 使用方法: svnlook dirs-changed <リポジトリパス> (属性の編集で) ディレクトリ自体に変更が加えられたか、子ノードのファイルに変更 が加えられたディレクトリを表示します。 使用方法: svnlook help [<サブコマンド>...] このプログラムやそのサブコマンドの使用方法を説明します。 使用方法: svnlook history <リポジトリパス> [<リポジトリ内パス>] <リポジトリ内パス> (あるいは、パスの指定がない場合はルートディレクトリ) の履 歴に関する情報を表示します。 使用方法: svnlook info <リポジトリパス> 変更者・タイムスタンプ・ログメッセージの長さ・ログメッセージを表示します。 使用方法: svnlook lock <リポジトリパス> <リポジトリ内パス> <リポジトリ内パス> にロックが存在していれば、それに関する記述を表示します。 使用方法: svnlook log <リポジトリパス> ログメッセージを表示します。 使用方法: svnlook tree <リポジトリパス> [<リポジトリ内パス>] <リポジトリ内パス> が与えられればそこから、そうでないときはツリーのルートから 始めてツリーを表示します。オプションを使うとノードのリビジョン ID も表示でき ます。 使用方法: svnlook uuid <リポジトリパス> リポジトリの UUID を表示します。 使用方法: svnlook youngest <リポジトリパス> 最新のリビジョン番号を表示します。 使用方法: svnserve [-d | -i | -t | -X | --service] [オプション] 有効なオプション: 使用方法: svnserve [-d | -i | -t | -X] [オプション] 有効なオプション: 使用方法: svnsync copy-revprops <同期先 URL> [[:]] 初期化に用いた同期元から同期先へ、指定されたリビジョン範囲のリビジョン属性を コピーします。 がともに指定されている場合、その範囲で指定されたリビジョンの 属性をまとめてコピーします。 のみが指定されている場合、そのリビジョンの 属性のみをコピーします。 が指定されていない場合、これまでに同期先に転送 されたリビジョンすべての属性をコピーします。 は、これまでに同期先に転送されたリビジョンでなければなりませ ん。どちらかのリビジョンに「転送された中で最新のリビジョン」を指定するのに "HEAD" を使用してもかまいません。 使用方法: svnsync help [<サブコマンド>...] このプログラムやそのサブコマンドの使用方法を説明します。 使用方法: svnsync synchronize <同期先 URL> 初期化に用いた同期元から同期先へ、未同期のリビジョンを転送します。 使用方法: svnversion [<オプション>] [<作業コピーパス> []] <作業コピーパス> にある作業コピーの簡潔な「バージョン番号」を生成します。 は、<作業コピーパス> 自体が switch で切り替えられたかどうかを決 めるのに用いられる、URL の末尾の部分です (<作業コピーパス> 内の一部が切り替 えられている場合、その切り替えは に依存せず検出できます)。バー ジョン番号は標準出力に書き込まれます。以下に例を示します: $ svnversion . /repos/svn/trunk 4168 作業コピーが単一のリビジョンをもち、変更を受けていなく、switch による切り替 えもされていなく、引数 にマッチする URL であった場合、バージョ ン番号は単一の数字となります。そうでない場合は、バージョン番号は以下のよう により複雑になります: 4123:4168 複数のリビジョンが混在している作業コピー 4168M 変更が加えられた作業コピー 4123S switch を使って切り替えられている作業コピー 4123P まばらチェックアウト機能を用いて作られた部分的な作業コピー 4123:4168MS 複数のリビジョンが混在しており、変更が加えられている、 switch を使って切り替えられている作業コピー 例えばエクスポートされたディレクトリのような、作業コピー以外のディレクトリ に対して実行すると、プログラムは「エクスポートされたものです」と出力します。 引数なしで呼び出された場合は、<作業コピーパス> はカレントディレクトリとなり ます。 有効なオプション: diff コマンドとして を用います外部エディタとして を用いますmerge コマンドとして を用います二者のうち新しい方として を用います二者のうち古い方として を用いますsvn:eol-style 属性が 'native' に設定されたファイ ルについて、システムで標準的な記号とは異なる行末 (EOL) マーカーを用います。 は 'LF'、'CR'、 'CRLF' のいずれかです。ダンプの出力として差分を用いますSubversion バージョン 1.4 以前と互換性のある形式 を使用しますSubversion バージョン 1.5 以前と互換性のある形式 を使用します厳密なセマンティクスを用いますfork の代わりにスレッドを用います [モード: daemon]マージ履歴由来の付加的な情報を使用・表示しますリポジトリを他のプロセスが利用中の場合、終了する 代わりに待ちますサーバのプロセス ID をファイル に書き込みま す [モード: daemon, listen-once, service]サーバのプロセス ID をファイル に書き込みま す [モード: daemon, listen-once]yes070701000851a6000041ed0000000000000000000000034cb5500a00000000000000b500010002ffffffffffffffff0000002200000000root/usr/local/share/locale/pt_BR070701000851a7000041ed0000000000000000000000024cb5500a00000000000000b500010002ffffffffffffffff0000002e00000000root/usr/local/share/locale/pt_BR/LC_MESSAGES070701000851a8000081a40000000000000000000000014cb550060002b73d000000b500010002ffffffffffffffff0000003c00000000root/usr/local/share/locale/pt_BR/LC_MESSAGES/subversion.mo,yYwwCw% x2xLx"kx,xxx xx y*yGyfy{yyy)y y,zv.z%zzzzz{ {# {D{!]{{{'{{%{* |37| k|.|||#|}",}"O}r}&}} }R}7:~+r~'~0~(~. 0O2%'A@C+*Ȁ%,L,j1LɁ"9$Ty$'&ق!i"8)Ń %6\p&Ä4ӄ$--B[&Ņ& +,X$o"8 &/@7pˇ!ԇ<3BS>09#9]26)68`Ō(،&('Ck2$؍<9:t+&$َ)A(-j'#,41F-x48ې<.Q,6'9 0F.w(,ϒ663%j5,Ɠ$$2WlF?Δ:4I)~Bҕ(C0UABȖA M Wbq ;חNbz%̘&9Tj{<3'K2s2#ٚ "64Y??Λ&*Q$qќ'(9bt ѝ<"8Qd.{+?֞"%9_7sן"(A`|Ġ$ޠ78Uġޡ5GXn&âآ")*T#o ţ"ף (R?|/Ki'ݥ$$*6O"$Φ $23&f§ҧ " 8&Y'=%  :S7i>>?7=wO-L33G/1,<^.7ʬ !#)E&o/9ƭW%X ~<;ܮ;;T<{ͯAI6'°#+ JeXβ&<WPk88c.VAR+@~?  +2J2}6ж2*:-e."۷(' G#hѸ=$$I.h9%ѹ$6AS=Ӻ;A$2f91ӻO!$qu( %5,[.˽$h(Ѿ*2DD  $6K!e p!$$*&%>)h Sax#zG7U/9-?,m.&3<$$a&$0!U@wB'*#N6_! 2+Bn:*+5>t%&.#L&p%% /;)k408'Rz%") )3']!WWv-.#.Rm$%"8 7E}00*: Z:{ !9#1UmTS0VBUJt','<"W z&#n@U&#S/R'%2K'd#!7= AH='+&CZv"%*A)`6be$5)%+1</n'C#\<>/,K_*+7 5Rb)'hB3' I3%}<7T h52&4*Ny//A<UI.4 6@jw,%Fl"# 2!4,Gt , '6!Jl,!,G`r* c90,"0OM !"(DDm)$*E^v,6Bc C #8#\##>>Sby(*$8L]E %2!X%z9, 7Po*%)+ &6]y., !&'Hp-/** 05f0oA17CLRL]0&-(#  0.:!i&$-4$P$u,?' "Hk'1 ' C X /l , " 8 -% S i    K   #" (F -o  &     ? VQ  0 ' % +A 3m  n -AZ(s('?#-;Q1. :$S#x$:)M w+, ,'Mu"'46('_dH,B.o&#$+<C *#  (DI9)u6hC6+&Fm(&//&Dk.(.Hy_W515g%" 8+ d { (!$B!2g!!!5!">"!\"&~" ""Q"#(#:#L#_#=x#$#$-$(%JD%+%'%)%) &"7&<Z&N&4&('0D'?u'F'?' <(J(h(2(E((G)Nd),);)B*3_*(**|*/X+!+I+N+SC,M,M,3-hQ-(->-<".:_.".&.2.$/);>0R>$>%>&>>*???W?#`??'???+?;(@d@@2@@@)A$,A$QAvAAAAABB!?BaB#|B,B1BBC$C?C\CqCCCC)C(C&(D'ODwD!DDDD E-$E]RE,E*EF %F/FFvF)FF%F"G-%GSGlGG*G+G/G.#H-RH!H H#HHI(&IOI"aII(I?IBJ"JJ mJExJ#JJ?KBKAK@/LpLLLULM7M>VM3M!M9M %N1N!KNmNN2NRN1*O!\OG~O+O+O0POP dP.oPPPP!P*Q+:Q0fQ0QQ.Q.R,=R,jRRR$R#R SS")S!LSnS-S0SS1T4TFT1aTT"T,T"T("U*KUvUUUU UUU2U$+VPV7WXYZ&Z'Z)Z[ 5[@[*Z[)[&[[[# \,-\1Z\2\,\ \ ],]H])d]]!]3]]-^ E^f^^!^0^ ^_!_7_N_i_h__. `:`N`l`)``$` `ak%aakab-bEb*abbbbbbcM#c*qc/c c?ce-dd}d*e,Ge!te e-eeegQlhth]3jUjjSk$kTmjmfynPn1o$qOr41snfsFs5tWRtt\*Si*#0 ='U0}#)Ҍm@j-!ٍ&'7_|.ێ8$&3KB(!( !64X')ΐ@9 A MXs-: )"3?V C?=WHCޓ "7CQ{E͔+B? +̗,"%=H;(D >e7,?F[O>11'c.11)2H9{<49'<a-9̝.35+i1:Ǟ5*8Ac.&ԟ(AVKtK< 6I*ġC':W6hBBB% h u+ۣ.J*cu"٤.6+1b=;ҥ8.G+v&+ɦ(Y"x,Kȧ5FJF4ب( )6-`EUԩR*(}3,ڪ3+;-g#٫;?4"t35ˬ=(?Oh7<1-2_B<ծl68*c+~15ܰ;1*m1.ʱ"!3>-rI(DDX,&ʳ+*0'[*ʹ&?2)r#(6$ BE!@;'D&d,(ͷd[2./G(wAC+&>R8?ʺF 7QA1˻492Cl3*)$94^0+Ľ*<LX:C:$"_&*$ԿH)BRlYWNq_A WbDQ@Q<_I/Py.%7>WFQk/41ONRMQdAW5W68U) zN&a8-*TB:9h [uAPDd@ +'$2L4"D?8\97& 4G#|&-(/DEX)7?(^2KRQYKQ(eHJ"UA11S03!5 B<8,'e,7(8 3#Qu 8W#ul.)5/_5c#!G#BfyO]["spK\S*3=6M92;O-,} - "8+[$&GI/e)>&+9,e?0 G37{!! 3'9[#//Cs%&$$&(Cl01" :.6i#3 &,@%m$,1)$Af X" <"]:4!.A^$|%)@ :JGC4&@[0F ( GI#5"6#YW}Y^/NZT8(,% #$%H3n*rA@%,(R6Q.5# -H\q5+)=HSLJ347h,$**/H4x*$$%"+H3tLii_?6 .@3o:6-8C!|%D' =1 ?o 9 (  / )L 6v  :  # 4 "D ,g )     - `K   > . UI +  ) BBW'?5+SJ1!7*V?F=QF9;6pE :17l444#Sw;#'#::P#60&g"16T([?6_-\"! D Q^q)/]#=)a0 ($78 NW  $ X E!a!-!!&!&!)"CG"""")""#32#-f#$#?#X#MR$$$%$&$$%&7%E^%%%4% &!-&&O&0v&0&/&2'1;'m''6''7'-0((^(0((3(5(54)0j)4) )3)D*9T*G*F*l+V+l+/N,:~,7,-, -5)-+_-'--(-5-2.8P.-.*.2. /M6/7/+/!/: 0E0Ae000!011F61=}131I1092!j22222Z2)F3.p373834$-4R4#q4&44l4B5Da5,5&5!596V627 7778)8(B8)k8(8H8,9M49;99"99<:![:-}:,::":;0;(K;&t;;0; ;;!<20<9c<<!<3<$=-=.B=+q=@=B=0!>R>#n>>y(??&=@<d@+@'@-@#A CAGdA$A.AB2BQB iB#tBCBFB,#CPCDCKD:gDWD*E%F,>F kFF=FFF,GCG:]G3G#G$G#H9HQHoHfHK[IKI#I'J'?JgJpKK'K9KK L&L/L:M*AM#lM<MM?M%N/BNrNNaNN OO0OFO^aOP+P3P23QQfQ(Q4Q&R9=R"wRDRSR;3S.oS6SBSJTPcT TT T5TQ3U UaURV.[VJVXV:.W3iWWW)GX%qXKXNXS2YMYOY#$ZsHZ3ZCZT4[?[,[.[4%\)Z\*\$\,\-]#/]/S]6]8]-]/!^`Q^ ^^&^=_9>_x_5*```?`K"a0na1a5aKbKSb6b,bocksc<cdfg=h(Yhhhhh"hi6iPiEoi0i8i(j-Hj2vj,j,jekaikUk/!lFQl$l0ll m%(m!Nmpm1m4m'm&n";n5^nnn'nn8nN,o:{oTo7 pCp>bp.p)p6p@1q@rq*q)q$r-r&Frmr$r r!r1r6!sEXs ss$s%t'tAt&]t"t"t2t3t01u/bu)u*u%u v+(v'Tv@|vjv4(w+]w!w&wHw,x8Hx"x*x+x6x 2y#Sywy1y2y6y50z4fz'z-z,z&{,E{/r{{&{{.|I0|Zz|,| }L }1Z}'}E}}L~Q~N*kk#"(FVo>ƀ1E7} #"ҁ=_P=$D/X,0/  :#[%41ڄ4 :A<|+օ6*95d*ņ"ֆ! '$:"_0@̇$ 42g%y9و--" P1q/Ӊ"  ,8KRe-b^)z&9ˏ "%-.S2)"ߐ(+F3r71ޑ /;=y-Ò"ߒ9 <8]!("'<, i%vȔ)pF!"3=q.*o"sy#4S2s"ɘ# #DVh+3*BJf 1H)  3/? oA|WpȟYNvaܢ[>W,pYQ1@vrHO2bYkj 8v>{KXyʴ[[ahԶRmP8aF{dLwHk `ub})Rj46Xx$=Z2"GUF9#@0?Mji@<tHw/FoL:t-!HKSb.w?.o=_itPsfB\lJ.~#](cpv\ ~A|Ay(j'  V-O*UL9inu/pS#+2BPc(!j ^bk `$<S2I=+Ib=Dd|x F$f@qm1  ?W:Ik@*1p4FvunB;dx 3\ e?)'_eQ)-",GKG[8>%w{w"N*Q1p7>lQVBa>JW+[;Z5zUz#ZS[@Je%A Y4To~myh7 rY%VWn}-f&scM1#h":+C&aCODTIf<]MK(%%:{R&CcZ0Vs4 pB` N}Jl|?StFymEn;o"vRqu^T3r*_.3~KEO[7AmO  i<\/YMosggC%5y8j0R3o2pKgOCXje<l3*,J4m'0W|$zlgu5&I6^aynx!V Xe]`$9z & E!)4@ZWL7~( ^^52 5=:r"Q&0LU Q G;DcNN69T|{\UDr +l7Zhh59XT[Ar>hYb ,[!zDx OP,Nb #L V7sc}P*Q_Hk\qGC n{P;^-u1 g]d,a=A8}>SHY';~.0<Et-(,Y}GEkH/8')dEf TU_fqR9k:zvs?KNv$ /Dq6x8/ e!1wM2t3]I)'B`rW6i_6 g]>i.Xh{+y|daJX`Mqv --- Changelist '%s': ------- Committed new rev %ld (loaded from original rev %ld) >>> ------- Committed revision %ld >>> Committed revision %ld. Error: no prefixes supplied. Fetching external item into '%s' Performing status on external item at '%s' Recovery completed. Valid options: Warning: %s * adding path : %s ... * deleting path : %s ... * editing path : %s ... * replacing path : %s ... %ld => (dropped) Merged %s:r%s%s - handles '%s' scheme (from %s:%ld) - The certificate has an unknown error. - The certificate has expired. - The certificate hostname does not match. - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! - The certificate is not yet valid. ARG done. "%s": unknown command. %s (revision %ld)%s (working copy)%s of '%s'%s, version %s compiled %s, %s %s: (Not a valid URL) %s: (Not a versioned resource) %sProperty changes on: %s%s%swarning: %s '%s' is not the same repository as '%s''%s' already exists'%s' already exists and is in the way'%s' already exists and is not a directory'%s' contains invalid filesystem format option '%s''%s' does not appear to be a URL'%s' does not appear to be a working copy path'%s' does not define '%s()''%s' does not exist'%s' does not exist in revision %ld'%s' exists and is non-empty'%s' exists and is not a directory'%s' has an unrecognized node kind'%s' has local modifications'%s' has lock token, but no lock owner'%s' has no URL'%s' has no ancestry information'%s' hook failed (did not exit cleanly: apr_exit_why_e was %d, exitcode was %d). '%s' hook succeeded, but error output could not be read'%s' in revision %ld is an unrelated object'%s' is a URL when it should be a path '%s' is a URL, but URLs cannot be commit targets'%s' is a URL, probably should be a path'%s' is a reserved name and cannot be imported'%s' is a wcprop, thus not accessible to clients'%s' is already a working copy for a different URL'%s' is already under version control'%s' is an URL when it should be a path'%s' is in the way of the resource actually under version control'%s' is marked as absent, so it cannot be scheduled for addition'%s' is neither a file nor a directory name'%s' is not a directory'%s' is not a directory in filesystem '%s''%s' is not a file'%s' is not a file in filesystem '%s''%s' is not a file or directory'%s' is not a valid EOL value'%s' is not a valid Subversion property name'%s' is not a valid administrative directory name'%s' is not a valid depth; try 'empty', 'files', 'immediates', or 'infinity''%s' is not a valid revision range'%s' is not a working copy'%s' is not a working copy directory'%s' is not locked'%s' is not locked in the repository'%s' is not locked in this working copy'%s' is not the root of the repository'%s' is not under version control'%s' is not under version control and is not part of the commit, yet its child '%s' is part of the commit'%s' is scheduled for addition within unversioned parent'%s' isn't in the same repository as '%s''%s' locked by user '%s'. '%s' not found'%s' not found in filesystem'%s' not versioned, and not exported '%s' path not found'%s' refers to a directory'%s' returned %d'%s' to '%s' is not a valid relocation'%s' unlocked. '%s' was not found in the repository at revision %ld'%s' was not present on the resource'--new' option only valid with '--old' option'DAV:baseline-collection' was not present on the baseline resource'get-file-revs' REPORT not implemented'get-file-revs' not implemented'get-locations' REPORT not implemented'get-locations' not implemented'incremental' option only valid in XML mode'stat' not implemented'verbose' option invalid in XML mode(R)eject or accept (t)emporarily? (R)eject, accept (t)emporarily or accept (p)ermanently? (local)(no author)(no date)* Dumped revision %ld. * Verified revision %ld. --This line, and those below, will be ignored----auto-props and --no-auto-props are mutually exclusive.merge-left.r%ld.merge-right.r%ld.working; run 'svn update' to complete it<<< Started new transaction, based on original revision %ld is missing ancestryA MERGE response for '%s' is not a child of the destination ('%s')A checksum mismatch occurredA conflict in the working copy obstructs the current operationA log message was given where none was necessaryA path under version control is needed for this operationA report cannot be generated because no data was suppliedA repository hook failedA representation vanished or changed between readsA working copy merge source needs an explicit revisionARG (some commands also take ARG1:ARG2 range) A revision argument can be one of: NUMBER revision number '{' DATE '}' revision at start of the date 'HEAD' latest in repository 'BASE' base rev of item's working copy 'COMMITTED' last commit at or before BASE 'PREV' revision just before COMMITTEDAborting commit: '%s' remains in conflictAccess scheme mixtures not yet supported ('%s' and '%s')Activity not foundAddedAdding %s Adding (bin) %s Adding a directory failed: %s on %s (%d)All authentication providers exhaustedApache got a malformed URIApache has no path to an SVN filesystemApply-textdelta already activeApply-textdelta not activeAre all the targets part of the same working copy?Argument to --limit must be positiveAt least one property change failed; repository is unchangedAt least one revision must be non-local for a pegged diffAt revision %ld. Attempt to change immutable filesystem nodeAttempt to deltify '%s' against itselfAttempt to pop empty WC unwind stackAttempt to remove or recreate fs root dirAttempt to set wc property '%s' on '%s' in a non-commit operationAttempt to unlock with non-empty unwind stackAttempted command in administrative dirAttempted removal of immutable nodeAttempted to clone child of non-mutable nodeAttempted to create a node with an illegal name '%s'Attempted to create entry in non-directory parentAttempted to create entry that already existsAttempted to delete a node with an illegal name '%s'Attempted to delete entry '%s' from *non*-directory nodeAttempted to delete entry '%s' from immutable directory nodeAttempted to get checksum of a *non*-file nodeAttempted to get length of a *non*-file nodeAttempted to get textual contents of a *non*-file nodeAttempted to lock an already-locked dirAttempted to make a child clone with an illegal name '%s'Attempted to open node with an illegal name '%s'Attempted to open non-existent child node '%s'Attempted to set entry in immutable nodeAttempted to set entry in non-directory nodeAttempted to set textual contents of a *non*-file nodeAttempted to set textual contents of an immutable nodeAttempted to write to non-transactionAttempting restricted operation for modified resourceAttempting to commit to a URL more than onceAuthentication error from server: %sAuthentication realm: %s Author name cannot contain a newlineAuthorization failedBad URL passed to RA layerBad database version: compiled with %d.%d.%d, running against %d.%d.%dBad database version: got %d.%d.%d, should be at least %d.%d.%dBad merge; ancestor, source, and target not all in same fsBad merge; target '%s' has id '%s', same as ancestorBad parent pool passed to svn_make_pool()Bad property nameBad property name: '%s'Base checksum mismatch on '%s': expected: %s actual: %s Baseline incorrectBerkeley DB deadlock errorBerkeley DB errorBerkeley DB error for filesystem '%s' while %s: Berkeley DB error for filesystem '%s' while closing environment: Berkeley DB error for filesystem '%s' while creating environment: Berkeley DB error for filesystem '%s' while opening environment: Bogus URLBogus dateBogus filenameBogus mime-typeBogus revision information givenBogus revision reportCan't accept client connectionCan't add '%s' to a parent directory scheduled for deletionCan't add '%s' to deleted directory; try undeleting its parent directory firstCan't allocate FS mutexCan't append '%s' to '%s'Can't bind server socketCan't calculate requested dateCan't calculate the request body sizeCan't change perms of file '%s'Can't change working directory to '%s'Can't check directory '%s'Can't check path '%s'Can't chmod '%s'Can't close directory '%s'Can't close file '%s'Can't close prototype revision lockfile for transaction '%s'Can't close streamCan't connect to host '%s'Can't convert module path to UTF-8 from UCS-2: '%s'Can't convert string from '%s' to '%s':Can't convert string from '%s' to native encoding:Can't convert string from native encoding to '%s':Can't convert string to UCS-2: '%s'Can't copy '%s' to '%s'Can't create FSFS txn list mutexCan't create FSFS write-lock mutexCan't create a character converter from '%s' to '%s'Can't create a character converter from '%s' to native encodingCan't create a character converter from native encoding to '%s'Can't create directory '%s'Can't create null stdout for hook '%s'Can't create pipe for hook '%s'Can't create process '%s' attributesCan't create server socketCan't create symbolic link '%s'Can't create threadCan't create threadattrCan't create tunnelCan't detect MIME type of non-file '%s'Can't determine the native path encodingCan't expand timeCan't fetch FSFS shared dataCan't find a temporary directoryCan't find a working copy pathCan't find an entryCan't find parent directory's entry while trying to add '%s'Can't flush file '%s'Can't flush file to diskCan't flush streamCan't get address infoCan't get attribute information from file '%s'Can't get attribute information from streamCan't get default file perms for file at '%s' (file stat error)Can't get entries of non-directoryCan't get exclusive lock on file '%s'Can't get file nameCan't get file perms for file at '%s' (file stat error)Can't get hostnameCan't get local hostnameCan't get module file nameCan't get passwordCan't get shared lock on file '%s'Can't get socket timeoutCan't get username or passwordCan't get working directoryCan't grab DSO mutexCan't grab FS mutexCan't grab FSFS txn list mutexCan't hide directory '%s'Can't lock charset translation mutexCan't make directory '%s'Can't make pipe read handle non-inherited for hook '%s'Can't make pipe write handle non-inherited for hook '%s'Can't manipulate current dateCan't move '%s' to '%s'Can't move source to destCan't open '%s'Can't open directory '%s'Can't open file '%s'Can't open file at '%s'Can't open stderrCan't open stdinCan't open stdio fileCan't open stdoutCan't parse lock/entries hashfile '%s'Can't read contents of linkCan't read directoryCan't read directory '%s'Can't read directory entry in '%s'Can't read file '%s'Can't read first line of format file '%s'Can't read from connectionCan't read length line in file '%s'Can't read length line in streamCan't read stdinCan't read streamCan't recode error string from APRCan't remove '%s'Can't remove directory '%s'Can't remove file '%s'Can't replace '%s' in deleted directory; try undeleting its parent directory firstCan't replace '%s' with a node of a differing type; the deletion must be committed and the parent updated before adding '%s'Can't restore working directoryCan't rewind directory '%s'Can't set access time of '%s'Can't set detached stateCan't set file '%s' read-onlyCan't set file '%s' read-writeCan't set permissions on '%s'Can't set position pointer in file '%s'Can't set position pointer in streamCan't set process '%s' child errfileCan't set process '%s' child errfile for error handlerCan't set process '%s' child inputCan't set process '%s' child outfileCan't set process '%s' cmdtypeCan't set process '%s' directoryCan't set process '%s' error handlerCan't set proplist on *immutable* node-revision %sCan't set text contents of a directoryCan't specify -c with --oldCan't start process '%s'Can't stat '%s'Can't store FSFS shared dataCan't tokenize command '%s'Can't ungrab DSO mutexCan't ungrab FS mutexCan't ungrab FSFS txn list mutexCan't unlock charset translation mutexCan't unlock nonlocked transaction '%s'Can't unlock prototype revision lockfile for transaction '%s'Can't unlock unknown transaction '%s'Can't write to '%s'Can't write to connectionCan't write to file '%s'Can't write to streamCannot calculate blame information for binary file '%s'Cannot change node kindCannot commit both '%s' and '%s' as they refer to the same URLCannot compare file contents between two different filesystemsCannot compare property value between two different filesystemsCannot copy between two different filesystems ('%s' and '%s')Cannot copy or move '%s': it is not in the repository yet; try committing firstCannot copy path '%s' into its own child '%s'Cannot copy revprops for a revision (%ld) that has not been synchronized yetCannot copy to '%s' as it is scheduled for deletionCannot copy to '%s', as it is not from repository '%s'; it is from '%s'Cannot display: file marked as a binary type.%sCannot initialize a repository with content in itCannot invoke editor to get log message when non-interactiveCannot mix repository and working copy sourcesCannot modify transaction named '%s' in filesystem '%s'Cannot move URL '%s' into itselfCannot move path '%s' into itselfCannot negotiate authentication mechanismCannot replace a directory from withinCannot revert '%s': unsupported entry node kindCannot revert '%s': unsupported node kind in working copyCannot revert addition of current directory; please try again from the parent directoryCannot set '%s' on a directory ('%s')Cannot set '%s' on a file ('%s')Cannot specify revision for deleting versioned property '%s'Cannot specify revision for editing versioned property '%s'Cannot specify revision for setting versioned property '%s'Cannot specify revisions (except HEAD) with move operationsCannot unlock path '%s', no authenticated username availableCannot use --username or --password with any of --source-username, --source-password, --sync-username, or --sync-password. Cannot verify lock on path '%s'; no matching lock-token availableCannot verify lock on path '%s'; no username availableCannot write lock/entries hashfile '%s'Cannot write property hash for '%s'Cannot write to the prototype revision file of transaction '%s' because a previous representation is currently being written by another processCannot write to the prototype revision file of transaction '%s' because a previous representation is currently being written by this processCapability entry is not a wordCaught signalCertificate information: - Hostname: %s - Valid: from %s until %s - Issuer: %s - Fingerprint: %s Changed paths: Changed-path entry not a listChangelist doesn't matchChangelist: %s Checked out external at revision %ld. Checked out revision %ld. Checkout complete. Checksum mismatch for '%s': expected checksum: %s actual checksum: %s Checksum mismatch for '%s'; expected: '%s', actual: '%s'Checksum mismatch for '%s'; recorded: '%s', actual: '%s'Checksum mismatch for resulting fulltext (%s): expected checksum: %s actual checksum: %s Checksum mismatch indicates corrupt text base: '%s' expected: %s actual: %s Checksum mismatch on rep '%s': expected: %s actual: %s Checksum mismatch while reading representation: expected: %s actual: %s Checksum mismatch, file '%s': expected: %s actual: %s Checksum mismatch, rep '%s': expected: %s actual: %s Checksum: %s Client certificate filename: Client/server version mismatchCommand 'finish-replay' invalid outside of replaysCommit created rev %ld but should have created %ldCommit failed (details follow):Commit item '%s' has copy flag but an invalid revisionCommit item '%s' has copy flag but no copyfrom URLCommit succeeded, but other errors follow:Commit succeeded, but post-commit hook failedCommitted revision %ld. Committing in directory scheduled for additionCompression of svndiff data failedConfig error: invalid integer value '%s'Conflict Current Base File: %s Conflict Previous Base File: %s Conflict Previous Working File: %s Conflict Properties File: %s Conflict at '%s'Copied From Rev: %ld Copied From URL: %s Copied properties for revision %ld (%s* properties skipped). Copied properties for revision %ld. Copied: %s (from rev %ld, %s) Copy from mutable tree not currently supportedCopyfrom-url '%s' has different repository root than '%s'Copying from transactions not allowedCorrupt DB: faulty predecessor countCorrupt DB: initial copy id not '0' in filesystem '%s'Corrupt DB: initial revision number is not '0' in filesystem '%s'Corrupt DB: initial transaction id not '0' in filesystem '%s'Corrupt current fileCorrupt entry in 'copies' table for '%s' in filesystem '%s'Corrupt entry in 'transactions' table for '%s' in filesystem '%s'Corrupt filesystem revision %ld in filesystem '%s'Corrupt lock in 'locks' table for '%s' in filesystem '%s'Corrupt lockfile for path '%s' in filesystem '%s'Corrupt node-id in node-revCorruption detected whilst reading delta chain from representation '%s' to '%s'Could not create top-level directoryCould not fetch the Version Resource URL (needed during an import or when it is missing from the local, cached props)Could not get content-type from responseCould not initialize the SASL libraryCould not obtain the list of SASL mechanismsCould not save fileCould not save the URL of the version resourceCould not use external editor to fetch log message; consider setting the $SVN_EDITOR environment variable or using the --message (-m) or --file (-F) optionsCould not write svndiff to temp fileCouldn't determine absolute path of '%s'Couldn't do property mergeCouldn't find a repositoryCouldn't obtain the authenticated usernameCouldn't open a repositoryCouldn't open logCreate an unversioned copy of a tree. usage: 1. export [-r REV] URL[@PEGREV] [PATH] 2. export [-r REV] PATH1[@PEGREV] [PATH2] 1. Exports a clean directory tree from the repository specified by URL, at revision REV if it is given, otherwise at HEAD, into PATH. If PATH is omitted, the last component of the URL is used for the local directory name. 2. Exports a clean directory tree from the working copy specified by PATH1, at revision REV if it is given, otherwise at WORKING, into PATH2. If PATH2 is omitted, the last component of the PATH1 is used for the local directory name. If REV is not specified, all local changes will be preserved. Files not under version control will not be copied. If specified, PEGREV determines in which revision the target is first looked up. Created: %s Creating DAV sandbox dirCreating authz fileCreating conf directoryCreating db lock fileCreating db logs lock fileCreating hook directoryCreating lock dirCreating passwd fileCreating post-commit hookCreating post-revprop-change hookCreating pre-commit hookCreating pre-revprop-change hookCreating start-commit hookCreating svnserve.conf fileCredential data unavailableDAV request failed; it's possible that the repository's pre-revprop-change hook either failed or is non-existentData cannot be safely XML-escapedDecompression of svndiff data failedDefault entry has no revision numberDefault entry is missing URLDefault: '-u'. When Subversion is invoking an external diff program, ARG is simply passed along to the program. But when Subversion is using its default internal diff implementation, or when Subversion is displaying blame annotations, ARG could be any of the following: -u (--unified): Output 3 lines of unified context. -b (--ignore-space-change): Ignore changes in the amount of white space. -w (--ignore-all-space): Ignore all white space. --ignore-eol-style: Ignore changes in EOL styleDelete failed: directory has no entry '%s'DeletedDeleting %s Delta does not contain enough new dataDelta does not fill the target windowDelta property block detected - not supported by svndumpfilterDeltifying revision %ld...Depth: INVALID Depth: empty Depth: files Depth: immediates Describe the usage of this program or its subcommands. usage: help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svndumpfilter help [SUBCOMMAND...] Destination '%s' already existsDestination '%s' is not a directoryDestination HEAD (%ld) is not the last merged revision (%ld); have you committed to the destination without using svnsync?Destination directory exists, and will not be overwritten unless forcedDestination directory exists; please remove the directory or use --force to overwriteDestination repository has not been initializedDestination repository is already synchronizing from '%s'Did not expect '%s' to be a working copy rootDidn't receive end marker for lock responsesDidn't receive end marker for unlock responsesDiff data source modified unexpectedlyDiff version inconsistencies in representation '%s'Directory '%s' containing working copy admin area is missingDirectory '%s' has no THIS_DIR entryDirectory '%s' has no URLDirectory '%s' is missingDirectory entry corruptDirectory needs to be empty but is notDirlist element not a listDisabled repository featureDo not display filtering statistics.Don't filter revision properties.Dump stream contains a malformed header (with no ':') at '%.20s'Dump stream contains a malformed header (with no value) at '%.20s'Dumpstream data appears to be malformedEither a URL or versioned item is requiredEmpty error listEnd revision %ld is invalid (youngest revision is %ld)Entry '%s' has illegal scheduleEntry '%s' has invalid '%s' valueEntry '%s' has invalid node kindEntry '%s' has no URLEntry '%s' has unexpectedly changed special statusEntry '%s' is already under version controlEntry already existsEntry for '%s' exists (though the working file is missing)Entry for '%s' has invalid repository rootEntry for '%s' has no URLEntry for '%s' is marked as 'copied' but is not itself scheduled for addition. Perhaps you're committing a target that is inside an unversioned (or not-yet-versioned) directory?Entry has an invalid attributeEntry has no URLEntry has no revisionError aborting reportError at entry %d in entries file for '%s':Error bumping revisions post-commit (details follow):Error calling external programError closing directory '%s'Error closing filesystemError closing null fileError closing read end of stderr pipeError closing write end of stderr pipeError comparing '%s' and '%s'Error during recursive copy of '%s'Error getting 'affected time' for '%s'Error getting 'affected time' of '%s'Error getting 'affected time' on '%s'Error getting UID of processError getting file size on '%s'Error in child process: %sError in post-commit clean-up (details follow):Error initializing command line argumentsError modifying entry for '%s'Error modifying entry of '%s'Error normalizing edited contents to internal formatError normalizing log message to internal formatError opening db lockfileError parsing %s property on '%s': '%s'Error parsing '%s'Error parsing argumentsError parsing diff optionsError processing command '%s' in '%s'Error reading changes for key '%s'Error reading spooled %s request responseError removing changelist from entry '%s'Error removing lock from entry for '%s'Error replacing text-base of '%s'Error resolving case of '%s'Error restoring text for '%s'Error retrieving REPORT (%d)Error running '%s': exitcode was %d, args were: in directory '%s', basenames: %s %s %sError running post-commit hookError running post-lock hookError running post-unlock hookError unlocking locked dirs (details follow):Error validating server certificate for '%s': Error waiting for process '%s'Error writing entries file for '%s'Error writing hash to '%s'Error writing log for '%s'Error writing stream: unexpected EOFError writing to '%s'Error writing to '%s': unexpected EOFExactly one file argument requiredExactly one property name and one file argument requiredExcluding (and dropping empty revisions for) prefixes: Excluding prefixes: Expected '%s' to be a directory but found a fileExpected '%s' to be a file but found a directoryExpected FS format '%d'; found format '%d'Expected FS format between '1' and '%d'; found format '%d'Expected a valid revnum and pathExpected repository format '%d' or '%d'; found format '%d'Expires: %s Explicit target argument requiredExplicit target required ('%s' interpreted as prop value)Export complete. Exported external at revision %ld. Exported revision %ld. External at revision %ld. External checkout complete. External export complete. External update complete. Failed to add directory '%s': a non-directory object of the same name already existsFailed to add directory '%s': a versioned directory of the same name already existsFailed to add directory '%s': an unversioned directory of the same name already existsFailed to add directory '%s': copyfrom arguments not yet supportedFailed to add directory '%s': object of the same name as the administrative directoryFailed to add file '%s': a non-file object of the same name already existsFailed to calculate MD5 digest for '%s'Failed to connect to Service Control ManagerFailed to create winservice_start_eventFailed to delete mmap '%s'Failed to execute WebDAV PROPPATCHFailed to fetch lock informationFailed to find label '%s' for URL '%s'Failed to find time on revision %ldFailed to get exclusive repository access; perhaps another process such as httpd, svnserve or svn has it open?Failed to get lock on destination repos, currently held by '%s' Failed to get new string keyFailed to load module for FS type '%s'Failed to load properties from diskFailed to mark '%s' absent: item of the same name is already scheduled for additionFailed to revert '%s' -- try updating instead. Failed to run '%s' hook; broken symlinkFailed to start '%s' hookFailed to write full amount to streamFailed writing updated fileFailure loading pluginFailure opening '%s'Failure reading rep '%s'File '%s' already existsFile '%s' has binary mime type propertyFile '%s' has inconsistent newlinesFile '%s' has local modificationsFile '%s' in directory '%s' is not a versioned resourceFile already exists: filesystem '%s', revision %ld, path '%s'File already exists: filesystem '%s', transaction '%s', path '%s'File is not mutable: filesystem '%s', revision %ld, path '%s'File not found: revision %ld, path '%s'File not found: transaction '%s', path '%s'Filesystem directory has no such entryFilesystem has no itemFilesystem has no such copyFilesystem has no such lockFilesystem has no such node-rev-idFilesystem has no such representationFilesystem has no such stringFilesystem is already openFilesystem is corruptFilesystem is not openFilesystem object already openFilesystem object has not been opened yetFilesystem path '%s' is neither a file nor a directoryFilter out nodes with given prefixes from dumpstream. usage: svndumpfilter exclude PATH_PREFIX... Filter out nodes without given prefixes from dumpstream. usage: svndumpfilter include PATH_PREFIX... Final line in revision file longer than 64 charactersFinal line in revision file missing spaceFirst line of '%s' contains non-digitFirst revision cannot be higher than secondFormat file '%s' contains an unexpected non-digitFormat of an svn:externals property was invalidFound a working copy pathFound malformed header in revision fileFraming error in pipe protocolGeneral filesystem errorGot apply-textdelta element without preceding add-file or open-fileGot cdata content for a prop deleteGot close-directory element without ever opening a directoryGot close-file element without preceding add-file or open-fileGot source path but no source revision for '%s'Got unrecognized encoding '%s'HTTP Path Not FoundIllegal svn repository URL '%s'Illegal target for the requested operationImpossibly long repository root from serverIn directory '%s'Including (and dropping empty revisions for) prefixes: Including prefixes: Incompatible library versionIncomplete dataIncomplete lock data returnedIncomplete or unterminated property blockInconsistent line ending styleIncorrect arguments suppliedIncorrect parameters givenIndexInput/output errorInter-repository relocation not allowedInternal error: there is an unknown parent (%d) for the 'DAV:response' element within the MERGE responseInvalid 'format' attributeInvalid URL '%s'Invalid URL: illegal character in proxy port numberInvalid URL: negative proxy port numberInvalid URL: proxy port number greater than maximum TCP port number 65535Invalid argument '%s' in diff optionsInvalid authz configurationInvalid change kind in rev fileInvalid change ordering: new node revision ID without deleteInvalid change ordering: non-add change on deleted pathInvalid change typeInvalid changes line in rev-fileInvalid config: illegal character in debug mask valueInvalid config: illegal character in timeout valueInvalid config: negative timeout valueInvalid config: unable to load certificate file '%s'Invalid config: unknown http authtype '%s'Invalid configuration valueInvalid control character '0x%02x' in path '%s'Invalid copy source path '%s'Invalid creation date header value in response.Invalid diff stream: [new] insn %d overflows the new data sectionInvalid diff stream: [src] insn %d overflows the source viewInvalid diff stream: [tgt] insn %d starts beyond the target view positionInvalid diff stream: insn %d cannot be decodedInvalid diff stream: insn %d has non-positive lengthInvalid diff stream: insn %d overflows the target viewInvalid editor anchoring; at least one of the input paths is not a directory and there was no source entryInvalid end revision %ldInvalid entry terminatorInvalid escape sequenceInvalid escaped characterInvalid file or dir token during editInvalid filesystem path syntaxInvalid filesystem revision numberInvalid filesystem transaction nameInvalid lockInvalid operation on the current working directoryInvalid prop-mod flag in rev-fileInvalid relocationInvalid report for top level of working copyInvalid revision number (%ld)Invalid revision number suppliedInvalid revision specifierInvalid scheduleInvalid server response to dated-rev requestInvalid start revision %ldInvalid switchInvalid target pathInvalid text-mod flag in rev-fileInvalid timeout valueInvalid value for field '%s'Invalid version line in entries file of '%s'Item already exists in filesystemItem is not readableItem is not writableItem is out of dateItem is partially readableLast Changed Author: %s Last Changed DateLast Changed Rev: %ld Left locally modified or unversioned filesLine endings other than expectedList all properties on files, dirs, or revisions. usage: 1. proplist [TARGET[@REV]...] 2. proplist --revprop -r REV [TARGET] 1. Lists versioned props. If specified, REV determines in which revision the target is first looked up. 2. Lists unversioned remote props on repos revision. TARGET only determines which repository to access. List directory entries in the repository. usage: list [TARGET[@REV]...] List each TARGET file and the contents of each TARGET directory as they exist in the repository. If TARGET is a working copy path, the corresponding repository URL will be used. If specified, REV determines in which revision the target is first looked up. The default TARGET is '.', meaning the repository URL of the current working directory. With --verbose, the following fields will be shown for each item: Revision number of the last commit Author of the last commit If locked, the letter 'O'. (Use 'svn info URL' to see details) Size (in bytes) Date and time of the last commit Local URL '%s' contains only a hostname, no pathLocal URL '%s' contains unsupported hostnameLocal URL '%s' does not contain 'file://' prefixLocal, non-commit operations do not take a log message or revision propertiesLocation entry not a listLock CreatedLock ExpiresLock Owner: %s Lock Token: %s Lock comment contains a zero byteLock comment contains illegal charactersLock comment file is a versioned file; use '--force-log' to overrideLock element not a listLock failed: newer version of '%s' existsLock file '%s' is not a regular fileLock has expiredLock request failed: %d %sLock response not a listLock token is incorrectLock working copy paths or URLs in the repository, so that no other user can commit changes to them. usage: lock TARGET... Use --force to steal the lock from another user or working copy. Log command for directory '%s' is mislocatedLog entry missing 'name' attribute (entry '%s' for directory '%s')Log entry not a listLog message contains a zero byteLog message file is a versioned file; use '--force-log' to overrideMD5 checksum is missingMIME type '%s' does not contain '/'MIME type '%s' has empty media typeMalformed URL for repositoryMalformed copyfrom line in node-revMalformed copyroot line in node-revMalformed dumpfile headerMalformed dumpstream: Revision 0 must not contain node recordsMalformed error listMalformed fileMalformed network dataMalformed representation headerMalformed skeleton dataMalformed stream dataMalformed svndiff data in representationMalformed text rep offset line in node-revMerge conflict during commitMismatch popping the WC unwind stackMismatched FS module version for '%s': found %d.%d.%d%s, expected %d.%d.%d%sMismatched RA version for '%s': found %d.%d.%d%s, expected %d.%d.%d%sMissing 'dest' attribute in '%s'Missing 'left' attribute in '%s'Missing 'revision' attribute for '%s'Missing 'right' attribute in '%s'Missing 'timestamp' attribute in '%s'Missing changed-path information for '%s' in revision %ldMissing cpath in node-revMissing default entryMissing end of line in wcprops file for '%s'Missing entry terminatorMissing kind field in node-revMissing name attr in %s elementMissing name attr in add-directory elementMissing name attr in add-file elementMissing name attr in delete-entry elementMissing name attr in open-directory elementMissing name attr in open-file elementMissing node-id in node-revMissing path argumentMissing propname and repository path argumentsMissing propname argumentMissing propname or repository path argumentMissing repository path argumentMissing required node revision IDMissing required revision specificationMissing revisionMissing revision attr in delete-entry elementMissing revision attr in open-directory elementMissing revision attr in open-file elementMissing revision attr in open-root elementMissing revision attr in target-revision elementModifiedModule for accessing a repository on local disk.Module for accessing a repository using the svn network protocol.Module for working with a Berkeley DB repository.Module for working with a plain file (FSFS) repository.Moves between the working copy and the repository are not supportedMultiple revision arguments encountered; can't specify -c twice, or both -c and -rMultiple revision arguments encountered; try '-r N:M' instead of '-r N -r M'Must specify the revision as a number, a date or 'HEAD' when operating on a revision propertyMutually exclusive arguments specifiedName does not refer to a filesystem directoryName does not refer to a filesystem fileName is not a single path componentName: %s Negative expiration date passed to svn_fs_lockNeon was unable to parse URL '%s'Network connection closed unexpectedlyNetwork read/write errorNetwork socket initialization failedNew entry name required when importing a fileNo '.' entry in: '%s'No auth file path availableNo authentication provider availableNo changes to property '%s' on '%s' No changes to property '%s' on revision %ld No commits in repositoryNo common parent found, unable to operate on disjoint argumentsNo copy with id '%s' in filesystem '%s'No default entry in directory '%s'No external editor availableNo lock on path '%s' in filesystem '%s'No lock token providedNo part of path '%s' was found in repository HEADNo such XML tag attributeNo such entry: '%s'No such representation '%s'No such revision %ldNo such transactionNo token given for path '%s' in filesystem '%s'No transaction named '%s' in filesystem '%s'No user associated with filesystemNo username is currently associated with filesystem '%s'No valid copyfrom revision in filtered streamNo write-lock in '%s'Node Kind: directory Node Kind: file Node Kind: none Node Kind: unknown Non-ASCII character (code %d) detected, and unable to convert to/from UTF-8Non-numeric limit argument givenNon-string as part of file contentsNot all required revisions are specifiedNot authorized to open root of edit operationNot enough arguments providedNull rep, but offset past zero alreadyNumber is larger than maximumObject is not a revision rootObject is not a transaction rootObstructed updateOnly diffs between a path's text-base and its working files are supported at this timeOnly one revision allowedOnly relative paths can be specified after a URLOperation does not apply to binary fileOperation does not apply to directoryOperation does not support multiple sourcesOption --tunnel-user is only valid in tunnel mode. Output the content of specified files or URLs with revision and author information in-line. usage: blame TARGET[@REV]... If specified, REV determines in which revision the target is first looked up. Output the content of specified files or URLs. usage: cat TARGET[@REV]... If specified, REV determines in which revision the target is first looked up. Owner: %s Passphrase for '%s': Password for '%s': Path '%s' already existsPath '%s' does not existPath '%s' does not exist in revision %ldPath '%s' doesn't exist in HEAD revisionPath '%s' doesn't exist in revision %ldPath '%s' ends in '%s', which is unsupported for this operationPath '%s' has no committed revisionPath '%s' is already locked by user '%s' in filesystem '%s'Path '%s' is no longer a member of a changelist. Path '%s' is not a URLPath '%s' is not a directoryPath '%s' is not a filePath '%s' is now a member of changelist '%s'. Path '%s' isn't locked. Path '%s' not found in head revisionPath '%s' not found in revision %ldPath '%s' not presentPath has no lock tokenPath is already lockedPath is not a stringPath is not a working copy directoryPath is not a working copy filePath is not lockedPath syntax not supported in this contextPath: %s Pathname not terminated by ':'Premature EOF seen from serverPremature end of content data in dumpstreamProblem on first log entry in a working copyProblem running logProcess '%s' failed (exitwhy %d)Process '%s' returned error exitcode %dProp diffs element not a listProperties on '%s': Property '%s' is an entry propertyProperty '%s' is not a regular propertyProperty '%s' not found on path '%s' in revision %ldProperty '%s' not found on path '%s' in transaction %sProperty '%s' not found on revision %ldProperty not foundProplist element not a listProtocol error: the MERGE response for the '%s' resource did not return all of the properties that we asked for (and need to complete the commit)Protocol error: we told the server not to auto-merge any resources, but it said that '%s' was mergedPut files and directories under version control, scheduling them for addition to repository. They will be added in next commit. usage: add PATH... Python exception has been set with the errorRA layer didn't receive requested OPTIONS infoRA layer failed to create HTTP requestRA layer failed to fetch propertiesRA layer failed to init socket layerRA layer file already existsRA layer request failedREPORT response handling failed to complete the editor driveREVISION PATH -------- ---- REVISION PATH -------- --------- Ran out of unique namesRead access denied for root of editRead error in pipeReading '%s'Reading from stdin is disallowedReading one svndiff window read beyond the end of the representationRecovery encountered a deltified directory representationRecovery encountered a non-directory nodeRecursively clean up the working copy, removing locks, resuming unfinished operations, etc. usage: cleanup [PATH...] Reference to non-existent node '%s' in filesystem '%s'Relative source revision %ld is not available in current repositoryRelocate can only change the repository part of an URLRemove a property from files, dirs, or revisions. usage: 1. propdel PROPNAME [PATH...] 2. propdel PROPNAME --revprop -r REV [TARGET] 1. Removes versioned props in working copy. 2. Removes unversioned remote prop on repos revision. TARGET only determines which repository to access. Remove revisions emptied by filtering.Removed lock on '%s'. Renumber revisions left after filtering.Rep '%s' both mutable and non-fulltextRep '%s' is not mutableRep contents are too large: got %s, limit is %sReplacing %s Repository Root: %s Repository URL required when importingRepository UUID: %s Repository access is needed for this operationRepository access method not implementedRepository argument requiredRepository argument required Repository creation failedRepository has been movedRepository has no UUIDRepository has not been enabled to accept revision propchanges; ask the administrator to create a pre-revprop-change hookRepository lock acquired. Please wait; recovering the repository may take some time... Repository moved permanently to '%s'; please relocateRepository moved temporarily to '%s'; please relocateRepresentation is being writtenRepresentation is not of type 'delta'Resolved conflicted state of '%s' Restore pristine working copy file (undo most local edits). usage: revert PATH... Note: this subcommand does not require network access, and resolves any conflicted states. However, it does not restore removed directories. Restored '%s' Reverted '%s' Revision %ld committed as %ld. Revision %ld doesn't match existing revision %ld in '%s'Revision %ld skipped. Revision being currently copied (%ld), last merged revision (%ld), and destination HEAD (%ld) are inconsistent; have you committed to the destination without using svnsync?Revision entry not a listRevision file lacks trailing newlineRevision property '%s' not allowed in this contextRevision property pair is emptyRevision range is not allowedRevision type requires a working copy path, not a URLRevision: %ld Revisions must not be greater than the youngest revision (%ld)Revisions renumbered as follows: Root object must be a transaction rootSQLite errorSSL is not supportedSafe data '%s' was followed by non-ASCII byte %d: unable to convert to/from UTF-8Schedule: add Schedule: delete Schedule: normal Schedule: replace Second revision requiredSend changes from your working copy to the repository. usage: commit [PATH...] A log message must be provided, but it can be empty. If it is not given by a --message or --file option, an editor will be started. If any targets are (or contain) locked items, those will be unlocked after a successful commit. Sending %s Server did not send repository rootServer does not support date-based operationsServer does not support locking featuresServer doesn't support setting arbitrary revision properties during commitServer doesn't support the get-lock commandServer doesn't support the lock commandServer doesn't support the replay commandServer doesn't support the unlock commandServer requires minimum version %dServer response missing the expected deadprop-count propertyServer sent unexpected return value (%d %s) in response to %s request for '%s'Session is rooted at '%s' but the repos root is '%s'Set new value for property '%s' on '%s' Set new value for property '%s' on revision %ld Setting property on non-local target '%s' needs a base revisionSetting property recursively on non-local target '%s' is not supportedSize of uncompressed data does not match stored original lengthSkipped '%s' Skipped missing target: '%s' Skipping binary file: '%s' Something is wrong with the log message's contentsSorry, svn_client_diff4 was called in a way that is not yet supportedSource '%s' is not a directorySource URL '%s' is from foreign repository; leaving it as a disjoint WCSource and dest appear not to be in the same repository (src: '%s'; dst: '%s')Source url '%s' is from different repositorySpecial code for wrapping server errors to report to clientStandard properties can't be set explicitly as revision propertiesStart revision %ld is greater than end revision %ldStart revision must precede end revisionStatus against revision: %6ld Storage of non-regular property '%s' is disallowed through the repository interface, and could indicate a bug in your clientString does not represent a node or node-rev-idString length larger than maximumSubcommand '%s' doesn't accept option '%s' Type 'svn help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnadmin help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svndumpfilter help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnlook help %s' for usage. Subcommand '%s' doesn't accept option '%s' Type 'svnsync help %s' for usage. Subcommand argument required Subversion is a tool for version control. For additional information, see http://subversion.tigris.org/ Successful edit status returned too soonSuccessor id '%s' (for '%s') already exists in filesystem '%s'Sum of subblock sizes larger than total block content lengthSummarizing diff can only compare repository to repositorySvndiff compressed data is invalidSvndiff contains corrupt window headerSvndiff data contains backward-sliding source viewSvndiff data contains corrupt windowSvndiff data contains invalid instructionSvndiff data ends unexpectedlySvndiff data has invalid headerSvndiff has backwards-sliding source viewsSvndiff has invalid headerSvndiff source length inconsistencySymbolic links are not supported on this platformSyntax error in native-eol argument '%s'Syntax error in revision argument '%s'Syntax error parsing revision '%s'Target lists to diff may not contain both working copy paths and URLsTest failedText Last UpdatedText delta chunk not a stringThe %s request returned invalid XML in the response: %s (%s)The CHECKOUT response did not contain a 'Location:' headerThe EDITOR, SVN_EDITOR or VISUAL environment variable or 'editor-cmd' run-time configuration option is empty or consists solely of whitespace. Expected a shell command.The MERGE property response had an error statusThe OPTIONS response did not include the requested activity-collection-set; this often means that the URL is not WebDAV-enabledThe URL '%s' has a different repository root than its parentThe UUID property was not found on the resource or any of its parentsThe VCC property was not found on the resourceThe file '%s' changed unexpectedly during diffThe file-revs report didn't contain any revisionsThe following repository access (RA) modules are available: The following repository back-end (FS) modules are available: The get-file-revs command didn't return any revisionsThe latest repos revision is %ld. The location for '%s' for revision %ld does not exist in the repository or refers to an unrelated objectThe lock comment is a pathname (was -F intended?); use '--force-log' to overrideThe log message file is under version controlThe log message is a pathnameThe log message is a pathname (was -F intended?); use '--force-log' to overrideThe operation was interruptedThe path was not part of a repositoryThe relative-path property was not found on the resourceThe repository at '%s' has uuid '%s', but the WC has '%s'The repository is locked, perhaps for db recoveryThe request response contained at least one errorThe response contains a non-conforming HTTP status lineThe root directory cannot be deletedThe service failed to startThe service failed to start; an internal error occurred while starting the serviceThe specified diff option is not supportedThe specified transaction is not mutableThere is already a versioned item '%s'There is no change 0This is an empty revision for padding.Token '%s' does not point to any existing lock in filesystem '%s'Too many arguments givenToo many arguments to import commandToo many nested itemsTransaction '%s' is not based on a revision; how oddTransaction '%s' removed. Transaction aborted, but cleanup failedTransaction cleanup failedTransaction is deadTransaction is dead: '%s'Transaction is not deadTransaction is not dead: '%s'Transaction is out of dateTransaction out of dateTransmitting file data Tried a versioning operation on an unversioned resourceTried to change an immutable representationTry 'svn add' or 'svn add --non-recursive' instead?Try 'svn help' for more infoTry 'svnadmin help' for more infoTry 'svndumpfilter help' for more infoTry 'svnlook help' for more infoTry 'svnsync help' for more infoTrying to add new property '%s' with value '%s', but property already exists with value '%s'.Trying to change property '%s' from '%s' to '%s', but property already exists with value '%s'.Trying to change property '%s' from '%s' to '%s', but the property does not exist.Trying to use an unsupported featureTunnel scheme %s requires environment variable %s to be definedTwo top-level reports with no targetTwo versioned resources are unrelatedType '%s --help' for usage. Type '%s help' for usage. Type 'svnversion --help' for usage. URL '%s' contains a '..' elementURL '%s' doesn't existURL '%s' doesn't match existing URL '%s' in '%s'URL '%s' is not properly URI-encodedURL '%s' non-existent in revision %ldURL '%s' non-existent in that revisionURL '%s' refers to a directoryURL '%s' refers to a file, not a directoryURL has no scheme: '%s'URL: %s URLs have no scheme ('%s' and '%s')UUID Token: %s Unable to check path existence for '%s'Unable to create transaction directory in '%s' for revision %ldUnable to extract data from response headerUnable to find repository location for '%s' in revision %ldUnable to locate auth fileUnable to lock '%s'Unable to lock/unlock across multiple repositoriesUnable to make any directoriesUnable to make name for '%s'Unable to open an ra_local session to URLUnable to open auth file for readingUnable to open auth file for writingUnable to open repository '%s'Unable to open root of editUndefined tunnel scheme '%s'Unexpected EOF on streamUnexpected EOF writing contentsUnexpected end of entryUnexpected end of svndiff inputUnexpected immutable node at '%s'Unexpected node kind foundUnexpected or unknown property kindUnexpected server response to authenticationUnexpectedly found '%s': path is marked 'missing'Unknown FS typeUnknown FS type '%s'Unknown XML encoding: '%s'Unknown authorization methodUnknown command '%s'Unknown command: '%s' Unknown entry kind for '%s'Unknown hostname '%s'Unknown node kind for '%s'Unknown node kind for representation '%s'Unknown or unexpected kind for path '%s'Unknown or unversionable type for '%s'Unknown status '%s' in command responseUnknown status for lock commandUnknown status for unlock commandUnknown svn protocol commandUnknown svn_node_kindUnlock request failed: %d %sUnlock response not a listUnlock succeeded, but post-unlock hook failedUnlock working copy paths or URLs. usage: unlock TARGET... Use --force to break the lock. Unmergeable scheduling requested on an entryUnreadable path encountered; access deniedUnrecognized URL scheme '%s'Unrecognized URL scheme for '%s'Unrecognized binary data encoding; can't decodeUnrecognized line ending styleUnrecognized logfile element '%s' in '%s'Unrecognized node kind: '%s'Unrecognized node-action on node '%s'Unrecognized record type in streamUnrecognized revision type requested for '%s'Unrecognized stream dataUnspecified error messageUnsupported FS formatUnsupported FS loader version (%d) for bdbUnsupported FS loader version (%d) for fsfsUnsupported RA loader version (%d) for ra_localUnsupported RA loader version (%d) for ra_serfUnsupported RA loader version (%d) for ra_svnUnsupported RA plugin ABI versionUnsupported dumpfile version: %dUnsupported node kind for path '%s'Unsupported repository versionUnsupported working copy formatUnversioned properties on revision %ld: Update complete. Updated external to revision %ld. Updated to revision %ld. Use --force to override this restrictionUser %s does not own lock on path '%s' (currently locked by %s)User '%s' is trying to use a lock owned by '%s' in filesystem '%s'Username does not match lock ownerUsername: Valid UTF-8 data (hex:%s) followed by invalid UTF-8 sequence (hex:%s)Value will not be set unless forcedVersion file format not correctVersion mismatch in '%s': found %d.%d.%d%s, expected %d.%d.%d%sWARNING: Referencing data in revision %ld, which is older than the oldest WARNING: dumped revision (%ld). Loading this dump into an empty repository WARNING: will fail. Waiting on repository lock; perhaps another process has it open? When specifying working copy paths, only one target may be givenWhile preparing '%s' for commitWorking copy '%s' is not lockedWorking copy '%s' lockedWorking copy format of '%s' is too old (%d); please check out your working copy againWorking copy is corruptWorking copy is not up-to-dateWorking copy not locked; this is probably a bug, please reportWorking copy path '%s' does not exist in repositoryWorking copy text base is corruptWrite denied: not authorized to read all of revision %ldWrite errorWrite-lock stolen in '%s'Wrong number of targets specifiedXML data was not well-formedXML parser failed in '%s'You must specify exactly one of -d, -i, -t or -X. Your .svn/tmp directory may be missing or corrupt; run 'svn cleanup' and try againYour commit message was left in a temporary file:[Error output could not be read.][Error output could not be translated from the native locale to UTF-8.]allocating new copy ID (getting 'next-key')allocating new node ID (getting 'next-key')allocating new representation (getting next-key)authorization failedbe verboseblame of the WORKING revision is not supportedbumping next copy keybumping next node ID keybumping next representation keybypass the repository hook systemcall hook after changing revision propertycall hook before changing revision propertycall post-commit hook after committing revisionscall pre-commit hook before committing revisionsclosing changes cursorconnect to source repository with password ARGconnect to source repository with username ARGconnect to sync repository with password ARGconnect to sync repository with username ARGcould not connect to servercreating changecreating cursor for reading a stringcreating cursor for reading changesdaemon modedeleting changesdeleting entry from 'copies' tabledeleting entry from 'nodes' tabledeleting representationdescend recursively, same as --depth=infinitydisable automatic log file removal [Berkeley DB]disable automatic propertiesdisable fsync at transaction commit [Berkeley DB]display this helpdisplay update informationdisregard default and svn:ignore property ignoresdo no interactive promptingdo not cache authentication tokensdo not cross copies while traversing historydo not output the trailing newlinedo not print differences for added filesdo not print differences for deleted filesdon't unlock the targetsdone. dump incrementallyenable automatic propertiesexported%sfetching changesforce operation to runforce read only, overriding repository config fileforce validity of log message sourcegeneral usage: svnadmin SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...] Type 'svnadmin help ' for help on a specific subcommand. Type 'svnadmin --version' to see the program version and FS modules. Available subcommands: general usage: svndumpfilter SUBCOMMAND [ARGS & OPTIONS ...] Type 'svndumpfilter help ' for help on a specific subcommand. Type 'svndumpfilter --version' to see the program version. Available subcommands: general usage: svnlook SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...] Note: any subcommand which takes the '--revision' and '--transaction' options will, if invoked without one of those options, act on the repository's youngest revision. Type 'svnlook help ' for help on a specific subcommand. Type 'svnlook --version' to see the program version and FS modules. Available subcommands: general usage: svnsync SUBCOMMAND DEST_URL [ARGS & OPTIONS ...] Type 'svnsync help ' for help on a specific subcommand. Type 'svnsync --version' to see the program version and RA modules. Available subcommands: get repository uuidgive output suitable for concatenationignore ancestry when calculating mergesignore any repos UUID found in the streamignore externals definitionsinetd modekeep path in working copylast changed rather than current revisionsload at specified directory in repositorymark revisions as merged (use with -r)maximum number of log entriesnext-id file corruptno progress (only errors) to stderrnotice ancestry when calculating differencesobsolete; try --depth=files or --depth=immediatesoperate on a revision property (use with -r or -t)operate on a revision property (use with -r)operate on single directory onlyoutput in XMLpass contents of file ARG as additional argsprint as little as possibleprint differences against the copy sourceprint extra informationproperty '%s' deleted from '%s'. property '%s' deleted from repository revision %ld property '%s' set on '%s' property '%s' set on repository revision %ld read configuration from file ARGread lock comment from file ARGread log message from file ARGread property value from file ARGread user configuration files from directory ARGreading copyreading filesystem revisionreading node revisionreading representationrelocate via URL-rewritingremove changelist associationremove redundant Berkeley DB log files from source repository [Berkeley DB]root of directory to serveset repos UUID to that found in stream, if anyset repository uuidshow a summary of the resultsshow details for copiesshow full paths instead of indenting themshow help on a subcommandshow node revision ids for each pathshow program version informationspecify a password ARGspecify a password ARG (deprecated; see --source-password and --sync-password)specify a username ARGspecify a username ARG (deprecated; see --source-username and --sync-username)specify lock comment ARGspecify log message ARGspecify revision number ARGspecify revision number ARG (or X:Y range)specify transaction name ARGstoring copy recordstoring node revisionstoring representationstoring transaction recordsubcommand argument required svn: run 'svn cleanup' to remove locks (type 'svn help cleanup' for details) svndiff data requested non-existent sourcesvndiff requested position beyond end of streamsvndiff window length is corruptsvnserve: Root path '%s' does not exist or is not a directory. svnserve: The --service flag is only valid if the process is started by the Service Control Manager. system('%s') returned %dthe change made by revision ARG (like -r ARG-1:ARG) If ARG is negative this is like -r ARG:ARG-1timed out waiting for servertreat value as being in charset encoding ARGtry operation but make no changestunnel modetype of repository: 'fsfs' (default) or 'bdb'unknownusage: svn [options] [args] Subversion command-line client, version %s. Type 'svn help ' for help on a specific subcommand. Type 'svn --version' to see the program version and RA modules or 'svn --version --quiet' to see just the version number. Most subcommands take file and/or directory arguments, recursing on the directories. If no arguments are supplied to such a command, it recurses on the current directory (inclusive) by default. Available subcommands: usage: svnadmin crashtest REPOS_PATH Open the repository at REPOS_PATH, then abort, thus simulating a process that crashes while holding an open repository handle. usage: svnadmin create REPOS_PATH Create a new, empty repository at REPOS_PATH. usage: svnadmin deltify [-r LOWER[:UPPER]] REPOS_PATH Run over the requested revision range, performing predecessor delti- fication on the paths changed in those revisions. Deltification in essence compresses the repository by only storing the differences or delta from the preceding revision. If no revisions are specified, this will simply deltify the HEAD revision. usage: svnadmin help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnadmin hotcopy REPOS_PATH NEW_REPOS_PATH Makes a hot copy of a repository. usage: svnadmin list-dblogs REPOS_PATH List all Berkeley DB log files. WARNING: Modifying or deleting logfiles which are still in use will cause your repository to be corrupted. usage: svnadmin list-unused-dblogs REPOS_PATH List unused Berkeley DB log files. usage: svnadmin load REPOS_PATH Read a 'dumpfile'-formatted stream from stdin, committing new revisions into the repository's filesystem. If the repository was previously empty, its UUID will, by default, be changed to the one specified in the stream. Progress feedback is sent to stdout. usage: svnadmin lstxns REPOS_PATH Print the names of all uncommitted transactions. usage: svnadmin recover REPOS_PATH Run the recovery procedure on a repository. Do this if you've been getting errors indicating that recovery ought to be run. Berkeley DB recovery requires exclusive access and will exit if the repository is in use by another process. usage: svnadmin rmlocks REPOS_PATH LOCKED_PATH... Unconditionally remove lock from each LOCKED_PATH. usage: svnadmin rmtxns REPOS_PATH TXN_NAME... Delete the named transaction(s). usage: svnadmin setlog REPOS_PATH -r REVISION FILE Set the log-message on revision REVISION to the contents of FILE. Use --bypass-hooks to avoid triggering the revision-property-related hooks (for example, if you do not want an email notification sent from your post-revprop-change hook, or because the modification of revision properties has not been enabled in the pre-revprop-change hook). NOTE: Revision properties are not versioned, so this command will overwrite the previous log message. usage: svnadmin setrevprop REPOS_PATH -r REVISION NAME FILE Set the property NAME on revision REVISION to the contents of FILE. Use --use-pre-revprop-change-hook/--use-post-revprop-change-hook to trigger the revision property-related hooks (for example, if you want an email notification sent from your post-revprop-change hook). NOTE: Revision properties are not versioned, so this command will overwrite the previous value of the property. usage: svnadmin verify REPOS_PATH Verifies the data stored in the repository. usage: svnlook author REPOS_PATH Print the author. usage: svnlook cat REPOS_PATH FILE_PATH Print the contents of a file. Leading '/' on FILE_PATH is optional. usage: svnlook changed REPOS_PATH Print the paths that were changed. usage: svnlook date REPOS_PATH Print the datestamp. usage: svnlook diff REPOS_PATH Print GNU-style diffs of changed files and properties. usage: svnlook dirs-changed REPOS_PATH Print the directories that were themselves changed (property edits) or whose file children were changed. usage: svnlook help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnlook history REPOS_PATH [PATH_IN_REPOS] Print information about the history of a path in the repository (or the root directory if no path is supplied). usage: svnlook info REPOS_PATH Print the author, datestamp, log message size, and log message. usage: svnlook lock REPOS_PATH PATH_IN_REPOS If a lock exists on a path in the repository, describe it. usage: svnlook log REPOS_PATH Print the log message. usage: svnlook tree REPOS_PATH [PATH_IN_REPOS] Print the tree, starting at PATH_IN_REPOS (if supplied, at the root of the tree otherwise), optionally showing node revision ids. usage: svnlook uuid REPOS_PATH Print the repository's UUID. usage: svnlook youngest REPOS_PATH Print the youngest revision number. usage: svnsync copy-revprops DEST_URL [REV[:REV2]] Copy the revision properties in a given range of revisions to the destination from the source with which it was initialized. If REV and REV2 are provided, copy properties for the revisions specified by that range, inclusively. If only REV is provided, copy properties for that revision alone. If REV is not provided, copy properties for all revisions previously transferred to the destination. REV and REV2 must be revisions which were previously transferred to the destination. You may use "HEAD" for either revision to mean "the last revision transferred". usage: svnsync help [SUBCOMMAND...] Describe the usage of this program or its subcommands. usage: svnsync synchronize DEST_URL Transfer all pending revisions to the destination from the source with which it was initialized. use ARG as diff commanduse ARG as external editoruse ARG as merge commanduse ARG as the newer targetuse ARG as the older targetuse a different EOL marker than the standard system marker for files with the svn:eol-style property set to 'native'. ARG may be one of 'LF', 'CR', 'CRLF'use deltas in dump outputuse format compatible with Subversion versions earlier than 1.4use format compatible with Subversion versions earlier than 1.5use strict semanticswait instead of exit if the repository is in use by another processProject-Id-Version: subversion 1.6 Report-Msgid-Bugs-To: dev@subversion.tigris.org POT-Creation-Date: 2009-03-17 14:50+0100 PO-Revision-Date: 2004-07-26 19:19-300 Last-Translator: Subversion Developers Language-Team: Brazilian Portuguese MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Changelist '%s': ------- Commit de nova rev %ld (carregada da rev original %ld) >>> ------- Committ de revisão %ld >>> Commit da revisão %ld. Erro: nenhum prefixo fornecido. Buscando item externo em '%s' Executando status em item externo em '%s' Recuperação completa. Opções válidas: Aviso: %s * incluindo caminho : %s ... * apagando caminho : %s ... * editando caminho : %s ... * substituindo caminho : %s ... %ld => (removida) Mesclado %s:r%s%s - trata esquema '%s' (de %s:%ld) - O certificado possui um erro desconhecido. - O certificado expirou. - O nome do servidor do certificado não bate. - O certificado não foi emitido por uma autoridade confiável. Use sua impressão digital para validar o certificado manualmente! - O certificado ainda não é válido. ARG pronto. "%s": commando desconhecido. %s (revisão %ld)%s (cópia de trabalho)%s de '%s'%s, versão %s compilado %s, %s %s: (Não é um URL válido) %s: (Não é um recurso versionado) %sMudanças de propriedades em: %s%s%saviso: %s '%s' não é o mesmo repositório que '%s''%s' já existe'%s' já existe e está no caminho'%s' já existe e não é um diretório'%s' contém uma opção inválida de formato de sistema de arquivos '%s''%s' não parece ser uma URL'%s' não parece ser o caminho de uma cópia de trabalho'%s' não define '%s()''%s' não existe'%s' não existe na revisão %ld'%s' existe e não está vazio'%s' existe e não é um diretório'%s' possui um tipo de nó não reconhecido'%s' possui modificações locais'%s' possui token de trava, mas não um dono para a trava'%s' não possui URL'%s' não possui informação de ancestralHook '%s' falhou (não finalizou de maneira limpa: apr_exit_why_e era %d, exitcode era %d). Hook '%s' completou com sucesso, mas saída de erro não pode ser lida'%s' na revisão %ld é um objeto não relacionado'%s' é uma URL quando deveria ser um caminho '%s' é uma URL, mas URLs não podem ter commit de alvos'%s' é uma URL, provavelmente deveria ser um caminho'%s' é um nome reservado e não pode ser importado'%s' é uma wcprop, portanto não acessível a clientes'%s' já é uma cópia de trabalho para uma URL diferente'%s' já está sobre controle de versão'%s' é uma URL quando deveria ser um caminho'%s' está no caminho do recurso atualmente sobre controle de versão'%s' está marcado como ausente, então não pode ser agendado para inclusão'%s' não é o nome de um arquivo ou de um diretório'%s' não é um diretório'%s' não é um diretório no sistema de arquivos '%s''%s' não é um arquivo'%s' não é um arquivo no sistema de arquivos '%s''%s' não é um arquivo ou diretório'%s' não é um valor válido de EOL'%s' não é um nome válido de propriedade Subversion'%s' não é um nome válido para um diretório administrativo'%s' não é um nível válido; tente 'empty', 'files', 'immediates', ou 'infinity''%s' não é uma faixa de revisão válida'%s' não é uma cópia de trabalho'%s' não é um diretório de cópia de trabalho'%s' não está travado'%s' não está travado no repositório'%s' não está travado nesta cópia de trabalho'%s' não é a raiz do repositório'%s' não está sobre controle de versão'%s' não está sobre controle de versão e não é parte do commit, porém seu filho '%s' é parte do commit'%s' está agendado para inclusão dentro de pai não versionado'%s' não está no mesmo repositório de '%s''%s' travado pelo usuário '%s'. '%s' não encontrado'%s' encontrado no sistema de arquivos'%s' não versionado, e não exportado Caminho '%s' não encontrado'%s' refere-se a um diretório'%s' retornou %d'%s' para '%s' não é uma relocação válida'%s' destravado. '%s' não foi encontrado no repositório na revisão %ld'%s' não estava presente no recursoOpção '--new' somente válida com opção '--old''DAV:baseline-collection' não estava presente no recurso baseline'get-file-revs' REPORT não implementado'get-file-revs' não implementado'get-locations' REPORT não implementado'get-locations' não implementadoOpção 'incremental' somente é válida no modo XML'stat' não implementadoOpção 'verbose' inválida no modo XML(R)ejeitar ou aceitar (t)emporariamente? (R)ejeitar, aceitar (t)emporariamente ou aceitar (p)permanente? (local)(sem autor)(sem data)* Extraída revisão %ld. * Verificada revisão %ld. --Esta linha, e as abaixo, serão ignoradas----auto-props e --no-auto-props são mutualmente exclusivos.mesclagem-esquerda.r%ld.mesclagem-direita.r%ld.trabalho; rode 'svn update' para completar<<< Iniciou nova transação, baseado na revisão original %ld falta ancestral para Uma resposta de MERGE para '%s' não é uma filha do destino ('%s')Um erro de checksum ocorreuUm conflito na cópia de trabalho obstrui a operação correnteUma mensagem de log foi fornecida onde nenhuma é necessáriaUm caminho sobre controle de versão é necessário para esta operaçãoUm relatório não pode ser gerado porque nenhum dado foi fornecidoUm 'hook' de repositório falhouUma representação desapareceu ou mudou entre leiturasA fonte de mesclagem de uma cópia de trabalho precisa de uma revisão explícitaARG (alguns comandos também usam faixa ARG1:ARG2) Um número de revisão pode ser um entre: NÚMERO número da revisão '{' DATA '}' revisão no início da data 'HEAD' último no repositório 'BASE' revisão base do item da cópia de trabalho 'COMMITED' último commit em ou antes de BASE 'PREV' revisão exatamente antes de COMMITEDAbortando commit: '%s' continua em conflitoAcesso às partes de um esquema ainda não suportado ('%s' e '%s')Atividade não encontradaIncluídoAdicionando %s Adic. (bin) %s Falhou ao incluir diretório: %s em %s (%d)Se esgotaram os provedores de autenticaçãoApache recebeu uma URI mal formadaApache não possui um caminho para um sistema de arquivos SVNApply-textdelta já ativoApply-textdelta não ativoSão todos os alvos partes de uma mesma cópia de trabalho?Argumento para --limit deve ser positivoAo menos uma troca de propriedades falhou; repositório é imutávelAo menos uma revisão deve ser não local para um diff marcadoNa revisão %ld. Tentativa de mudar nó imutável de sistema de arquivosTentativa de deltificar '%s' contra si mesmoTentativa de executar 'pop' em uma pilha de retorno de CT vaziaTentativa de remover ou recriar diretório raiz de sistema de arquivosTentativa de setar propriedade de ct '%s' em '%s' em uma operação não commitTentativa de destravar com com uma pilha de retorno não vaziaTentativa de comando em diretório administrativoTentativa de remoção de nó imutávelTentativa de clonar filho de nó não-mutávelTentativa de criar um nó com um nome ilegal '%s'Tentativa de criar entrada em pai não-diretórioTentativa de criar entrada que já existeTentativa de apagar um nó com um nome ilegal '%s'Tentativa de apagar entrada '%s' de nó *não*-diretórioTentativa de apagar entrada '%s' de nó diretório imutávelTentativa de obter checksum de um nó *não*-arquivoTentativa de obter o comprimento de um nó *não*-arquivoTentativa de obter contexto textual de um nó *não*-arquivoTentativa de travar um diretório já travadoTentativa de criar um clone filho com um nome ilegal '%s'Tentativa de abrir nó com um nome ilegal '%s'Tentativa de abrir um nó filho não-existente '%s'Tentativa de setar entrada em nó imutávelTentativa de setar entrada em nó não-diretórioTentativa de setar conteúdo textual em nó *não*-arquivoTentativa de setar conteúdo textual em nó imutávelTentativa de escrever em não transacionalTentativa de executar operação restrita para recurso modificadoTentativa de commit em uma URL mais de uma vezErro de autenticação do servidor: %sÁrea de autenticação: %s Nome do autor não pode conter 'newline'Autorização falhouURL ruim passada à camada RAVersão de banco de dados ruim: compilado com %d.%d.%d, rodando em %d.%d.%dVersão de banco de dados ruim: obteve %d.%d.%d, deve ser ao menos %d.%d.%dMerge ruim; ancestral, fonte, e alvo não estão em mesmo saMerge ruim; alvo '%s' tem id '%s', mesmo que ancestralPool pai ruim passado para svn_make_pool()Nome ruim de propriedadeNome ruim de propriedade: '%s'Checksum base não bate em '%s': esperado: %s obtido: %s Baseline incorretoErro de deadlock Berkeley DBErro Berkeley DBErro Berkeley DB para sistema de arquivos '%s' ao %s: Erro Berkeley DB para sistema de arquivos '%s' ao fechar ambiente Erro Berkeley DB para sistema de arquivos '%s' ao criar ambiente: Erro Berkeley DB para sistema de arquivos '%s' ao abrir ambiente: URL estranhaData estranhaNome de arquivo estranhoTipo mime estranhoInformação de revisão estranha fornecidaRelatório de revisão estranhoNão foi possível aceitar conexão de clienteNão é possível adicionar '%s' ao diretório pai agendado para remoçãoNão é possível adicionar '%s' ao diretório apagado; tente desapagar seu diretório pai primeiroNão foi possível alocar mutex FSNão foi possível colar '%s' ao final de '%s'Não foi possível executar bind de socket de servidorNão é possível calcular a data da requisiçãoNão é possível calcular o tamanho do corpo da requisiçãoNão foi possível modificar as permissões do arquivo '%s'Não é possível mudar diretório de trabalho para '%s'Não foi possível verificar o diretório '%s'Não foi possível verificar o caminho '%s'Não é possível aplicar chmod a '%s'Não foi possível fechar o diretório '%s'Não foi possível fechar o arquivo '%s'Não foi possível fechar o arquivo protótipo de trava de revisão para transação '%s'Não foi possível fechar a cadeiaNão foi possível conectar ao servidor '%s'Não foi possível converter o caminho do módulo para UTF-9 de UCS-2: '%s'Não foi possível converter string de '%s' para '%s'Não foi possível converter string de '%s' para codificação nativa:Não foi possível converter string de codificação nativa para '%s':Não foi possível converter string para UCS-2: '%s'Não foi possível copiar '%s' para '%s'Não é possível criar mutex FSFS de txnNão é possível criar mutex FSFS de escritaNão foi possível criar um conversor de caracteres de '%s' para '%s'Não foi possível criar um conversor de caracteres de '%s' para codificação nativaNão foi possível criar conversor de caracteres de codificação nativa para '%s'Não foi possível criar diretório '%s'Não foi possível criar stdout null para hook '%s'Não foi possível criar pipe para hook '%s'Não foi possível criar atributos do processo '%s'Não foi possível criar socket de servidorNão foi possível criar link simbólico '%s'Não foi possível criar threadNão foi possível criar threadattrNão é possível criar túnelNão é possível detectar o tipo MIME do não-arquivo '%s'Não foi possível determinar a codificação do caminho nativoNão foi possível expandir a horaNão foi possível buscar dados FSFS compartilhadosNão foi possivel encontrar um diretório temporárioNão foi possível encontrar um caminho de cópia de trabalhoNão foi possível encontrar uma entradaNão foi possível encontrar entrada de diretório pai ao tentar adicionar '%s'Não foi possível descarregar o buffer do arquivo '%s'Não foi possível descarregar o buffer do arquivo pro discoNão foi possível descarregar o buffer da cadeiaNão foi possível obter informação de endereçoNão foi possível obter informações de atributo do arquivo '%s'Não foi possível obter informações de atributo da cadeiaNão foi possível obter permissões padrões de arquivo para o arquivo em '%s' (erro de início de arquivo)Não é possível obter entradas de um não-diretórioNão foi possível obter trava exclusiva no arquivo '%s'Não foi possível obter o nome do arquivoNão foi possível obter permissões de arquivo para o arquivo em '%s' (erro de início de arquivo)Não foi possível obter o nome do servidorNão foi possível obter o nome do servidor localNão foi possível obter o nome do arquivo do móduloNão foi possível obter senhaNão é possível obter trava compartilhada no arquivo '%s'Não foi possível obter timeout de socketNão foi possível obter nome de usuário e senhaNão é possível obter diretório de trabalhoNão foi possível obter mutex DSONão foi possível obter mutex FSNão foi possível obter mutex FSFS de lista de txnNão foi possível esconder o diretório '%s'Não foi possível travar o mutex de tradução do conjunto de caracteresNão foi possível criar diretório '%s'Não foi possível criar pipe de leitura para hook não herdado '%s'Não foi possível criar pipe de escrita para hook não herdado '%s'Não foi possível manipular a data correnteNão é possível mover '%s' para '%s'Não é possível mover origem para destinoNão é abrir '%s'Não foi possível abrir o diretório '%s'Não foi possível abrir o arquivo '%s'Não foi possível abrir o arquivo em '%s'Não é possível abrir stderrNão foi possível abrir stdinNão foi possível abrir arquivo stdioNão é possível abrir stdoutNão é possível executar parse de hash de trava/entradas '%s'Não é possível ler o conteúdo do linkNão foi possível ler o diretórioNão foi possível ler o diretório '%s'Não foi possível ler a entrada de diretório em '%s'Não é possível ler o arquivo '%s'Não foi possível ler a primeira linha do arquivo de formato '%s'Não é possível ler da conexãoNão é possível ler o comprimento de uma linha no arquivo '%s'Não foi possível ler o comprimento de uma linha na cadeiaNão foi possível ler stdinNão foi possível ler a cadeiaNão pode gravar string de erro de APRNão é remover '%s'Não foi possível remover o diretório '%s'Não é possível remover o arquivo '%s'Não é possível substituir '%s' no diretório apagado; tente desapagar seu diretório pai primeiroNão é possível substituir '%s' com um nó de diferente tipo; deve haver commit da remoção e o pai atualizado antes de adicionar '%s'Não é possível restaurar diretório de trabalhoNão foi possível reiniciar o diretório '%s'Não foi possível setar hora de acesso de '%s'Não foi possível setar estado detachedNão foi possível setar o arquivo '%s' como somente para leituraNão foi possível setar o arquivo '%s' como para leitura e escritaNão foi possível setar permissão em '%s'Não foi possível setar ponteiro de posição no arquivo '%s'Não foi possível setar ponteiro de posição na cadeiaNão foi possível setar arquivo de erro filho do processo '%s'Não foi possível setar arquivo errfile filho '%s' do handler de erroNão foi possível setar entrada filha do processo '%s'Não foi possível setar arquivo de saída filho do processo '%s'Não foi possível setar cmdtype do processo '%s'Não foi possível setar diretório do processo '%s'Não foi possível setar handler de erro do processo '%s'Não foi possível setar proplist em um nó-revisão *imutável* %sNão pode setar conteúdo de texto de um diretórioNão é possível especificar -c com --oldNão é possível iniciar o processo '%s'Não é possível executar stat '%s'Não foi possível armazenar dado compartilhado FSFSNão é possível separar comando '%s' em tokensNão foi possível disponibilizar mutex DSONão foi possível disponibilizar mutex FSNão foi possível disponibilizar mutex FSFS de lista de txnNão foi possível destravar o mutex de tradução do conjunto de caracteresNão foi possível destravar transação não travada '%s'Não foi possível destravar o arquivo de travas para revisão '%s'Não foi possível destravar transação desconhecida '%s'Não é possível escrever em '%s'Não é possível escrever na conexãoNão é possível escrever no arquivo '%s'Não é possível escrever na cadeiaNão é possível calcular informação blame para arquivo binário '%s'Não é possível modificar o tipo de nóNão é possível executar commit em '%s' e '%s' porque ambos referem ao mesmo URLNão é possível comparar conteúdos de arquivos entre dois sistemas arquivos diferentesNão é possível comparar valores de propriedades de dois sistemas arquivos diferentesNão é possível copiar entre dois sistemas arquivos diferentes ('%s' e '%s')Não é possível copiar ou mover '%s': ainda não está no repositório; tente commit primeiroNão é possível copiar caimho '%s' para seu próprio filho '%s'Não é possível copiar revprops para a revisão (%ld) que não foi sincronizada aindaNão é possível copiar para '%s' por estar agendado para remoçãoNão é possível copiar para '%s', pois não é do repositório '%s'; é de '%s'Não é possível mostrar: arquivo marcado como tipo binário.%sNão foi possível inicializar um repositório com conteúdoNão foi possível chamar o editor para obter a mensagem de log estando em modo não-interativoNão é possível misturar fontes de repositório e de cópia de trabalhoNão é possível modificar transação chamada '%s' no sistema de arquivos '%s'Não é possível mover URL '%s' para si mesmoNão se pode mover '%s' para si mesmoNão foi possível negociar mecanismo de autenticaçãoNão é possível modificar um diretório de dentro dele mesmoNão é possível reverter '%s': tipo de nó de entrada não suportadoNão é possível reverter '%s': tipo de nó não suportado na cópia de trabalhoNão é possível reverter inclusão do diretório corrente; por favor tente novamente de um diretório paiNão é possível setar '%s' em um diretório ('%s')Não é possível setar '%s' em um arquivo ('%s')Não é possível especificar revisão para propriedade versionada apagada '%s'Não é possível especificar revisão para editar propriedade versionada '%s'Não é possível especificar revisão para setar propriedade versionada '%s'Não é possível especificar revisões (exceto HEAD) com operações de mudançaNão foi possível destravar o caminho '%s', nenhum nome de usuário para autenticação disponívelNão é possível usar --username ou --password com qualquer um de --source-username, --source-password, --sync-username, ou --sync-password. Não foi possível verificar a trava no caminho '%s'; nenhum token-de-trava disponívelNão foi possível verificar trava no caminho '%s'; nenhum nome de usuário disponívelNão é possível escrever hash de trava/entradas '%s'Não é possível escrever hash de propriedade para '%s'Não é possível escrever o arquivo protótipo de trava de revisão para transação '%s' porque uma representação prévia está sendo escrita por outro processoNão é possível escrever o arquivo protótipo de trava de revisão para transação '%s' porque uma representação prévia está sendo escrita por este processoEntrada de capacidade não é uma palavraSinal pegoInformações do certificado: - Nome do servidor: %s - Validade: de %s até %s - Emissor: %s - Impressão digital: %s Caminhos mudados: Entrada changed-path não é uma listaChangelist não combinaChangelist: %s Gerado externo para cópia de trabalho na revisão %ld. Gerado cópia de trabalho para revisão %ld. Geração de cópia de trabalho completa. Checksum não bate para '%s': checksum esperado: %s checksum obtido: %s Checksum não bate para '%s'; esperado: '%s', obtido: '%s'Checksum não bate para '%s'; gravado: '%s', obtido: '%s'Checksum não bate para fulltext resultante (%s): checksum esperado: %s checksum obtido: %s Checksum não batendo indica texto base corrompido: '%s' esperado: %s obtido: %s Checksum não bate no rep '%s' esperado: %s obtido: %s Checksum não batendo ao ler representação: esperado: %s obtido: %s Checksum não bate, arquivo '%s': esperado: %s obtido: %s Checksum não bate, rep '%s': esperado: %s obtido: %s Checksum: %s Nome do arquivo do certificado do cliente: Versões de cliente/servidor não batemCommando 'finish-replay' inválido fora de replaysCommit criou revisão %ld mas deveria ter criado %ldCommit falhou (detalhes a seguir):item de commit '%s' possui flag de cópia mas uma revisão inválidaitem de commit '%s' possui flag de cópia mas não copyfrom URLCommit completou com sucesso, mas outros erros a seguir:Commit completou com sucesso, mas hook post-commit falhouCommit da revisão %ld. Executando commit em diretório agendado para inclusãoCompressão de dados de svndiff falhouErro de configuração: valor inteiro inválido '%s'Arquivo Base Atual do Conflito: %s Arquivo Base Anterior ao Conflito: %s Arquivo de Trabalho Anterior ao Conflito: %s Arquivo de Propriedades do Conflito: %s Conflito em '%s'Copiado De Rev: %ld Copiado De URL: %s Propriedades copiadas para revisão %ld (%s* propriedades omitidas). Propriedades copiadas para revisão %ld. Copiado: %s (de rev %ld, %s) Cópia de árvore mutável não é suportada atualmenteCopyfrom-url '%s' possui raiz de repositório diferente de '%s'Não é permitido copiar de transaçõesBD corrompido: contador de predecessores incorretoBD corrompido: id de cópia inicial não é '0' no sistema de arquivos '%s'BD corrompido: número de revisão inicial não é '0' no sistema de arquivos '%s'BD corrompido: id da transactions inicial não é '0' no sistema de arquivos '%s'Arquivo corrente corrompidoEntrada corrompida na tabela 'copies' para '%s' no sistema de arquivos '%s'Entrada corrompida na tabela 'transactions' para '%s' no sistema de arquivos '%s'Revisão %ld de SA corrompida no SA '%s'Trava corrompida na tabela 'locks' para '%s' no sistema de arquivos '%s'Arquivo de trava corrompido para o caminho '%s' no sistema de arquvos '%s'node-id corrompido em node-revDado corrompido detectado quando lendo cadeia delta de representação '%s' para '%s'Não foi possivel criar diretório de nível topoNão foi possível obter o Version Resource URL (necessário durante uma importação ou quando está faltando do props em cache e local)Não foi possível obter content-type da respostaNão foi possível inicializar a biblioteca SASLNão foi possível obter a lista de mecanismos SASLNão foi possível gravar arquivoNão foi possível salvar a URL do recurso de versãoNão foi possível usar editor externo para recuperar mensagem de log; considere setar a variável de ambiente $SVN_EDITOR ou usar as opções --message (-m) ou --file (-F)Não foi possível escrever svndiff para arquivo temporárioNão foi possível determinar o caminho absoluto de '%s'Não foi possível mesclar propriedadesNão foi possível encontrar um repositórioNão foi possível obter o nome do usuário autenticadoNão foi possível abrir um repositórioNão foi possível abrir logCria uma cópia não versionada de uma árvore. uso: 1. export [-r REV] URL[@PEGREV] [CAMINHO] 2. export [-r REV] CAMINHO1@PEGREV] [CAMINHO2] 1. Exporta uma árvore de diretório limpa do repositório especificado por URL, na revisão REV se for informada, caso contrário em HEAD, em CAMINHO. Se CAMINHO é omitido, o último componente de URL é usado para o nome do diretório local. 2. Exporta uma árvore de diretório limpa da cópia de trabalho especificada por CAMINHO1, na revisão REV se for informada, caso contrário em WORKING, em CAMINHO2. Se CAMINHO2 é omitido, o último componente de CAMINHO1 é usado para o nome do diretório local. Se REV não é especificado, todas as mudanças locais serão preservadas. Arquivos fora do controle de versão não serão copiados. Se especificado, PEGREV determina qual revisão o alvo é primeiramente considerada. Criado: %s Criando diretório sandbox DAVCriando arquivo authzCriando diretório confCriando aquivo de trava de bdCriando arquivo trava de logs de bdCriando diretório de hookCriando diretório de travaCriando arquivo de senhasCriando hook post-commitCriando hook post-revprop-changeCriando hook pre-commitCriando hook pre-revprop-changeCriando hook start-commit hookCriando arquivo svnserve.confDados credenciais não disponíveisRequisição DAV falhou; é possível que o 'hook' pre-revprop-change do diretório ou falhou ou não existeDado não pode ser gerado seguramente como XMLDescompressão de dados de svndiff falhouEntrada padrão não possui número de revisãoEntrada padrão não possui URLPadrão: '-u'. Quando Subversion está invocando um programa diff externo, ARG é simplesmente passado ao programa. Mas quando Subversion está usando sua implementação interna de diff, ou quando Subversion está mostrando anotações blame, ARG pode ser quaquer um dos seguintes: -u (--unified): Mostra três linhas do contexto unificado. -b (--ignore-space-change): Ignora mudanças na quantidade de espaços. -w (--ignore-all-space): Ignora todos espaços em branco. --ignore-eol-style: Ignora mudanças no estilo de fim de linhaRemoção falhou: diretório não possui entrada '%s'ApagadoApagando %s Delta não contém dados suficienteDelta não preenche a janela alvoDetectado bloco de propriedade delta - não suportado por svndumpfilterExecutando delta de revisão %ld...Nível: INVÁLIDO Nível: vazio Nível: arquivos Nível: imediatos Descreve o uso deste programa ou seus sub-comandos. uso: help [SUB-COMANDO...] Descreve o uso deste programa ou seus sub-comandos. uso: svndumpfilter help [SUB-COMANDO...] Destino '%s' já existeDestino '%s' não é um diretórioDestino HEAD (%ld) não é a última revisão com merge (%ld); você fez commit para o destino sem usar svnsync?Diretório de destino existe, e não será sobrescrito a menos que forçadoDiretório de destino existe; por favor remova o diretório ou use --force para sobrescreverRepositório destino não foi inicializadoRepositório destino já está sincronizado de '%s'Não esperava que '%s' fosse a raiz de uma cópia de trabalhoMarca de fim não foi recebida para resposta de travarMarca de fim não foi recebida para resposta de destravarDados fonte de svndiff modificados inesperadamenteInconsistências de versão de diff na representação '%s'Diretório '%s' contendo área de trabalho admin em cópia de trabalho faltandoDiretório '%s' não possui entrada THIS_DIRDiretório '%s' não possui URLDiretório '%s' está faltandoEntrada de diretório corrompidaDiretório precisa estar vazio mas não estáElemento dirlist não é uma listaFuncionalidade de repositório desabilitadaNão mostra estatísticas de filtro.Não filtra propriedades de revisões.Cadeia extraída contém um cabeçalho mal formado (sem ':') em '%.20s'Cadeia extraída contém um cabeçalho mal formado (sem valor) em '%.20s'Dados de cadeia dump parecem estar mal formadosUma URL ou item versionado é necessárioLista de erro vaziaFinal da revisão %ld é inválido (revisão mais nova é %ld)Entrada '%s' possui agendamento ilegalEntrada '%s' possui um valor '%s' inválidoEntrada '%s' possui um tipo de nó inválidoEntrada '%s' não possui URLEntrada '%s' inesperadamente teve um estado especial modificadoEntrada '%s' já está sobre controle de versãoEntrada já existeEntrada para '%s' existe (embora o arquivo de trabalho esteja faltando)Entrada para '%s' possui raiz de repositório inválidaEntrada para '%s' não possui URLEntrada para '%s' está marcada como 'copiada' mas não está ela mesma agendada para inclusão. Talvez você esteja executando commit em um alvo que está dentro de um diretório não versionado (ou não ainda versionado)?Entrada possui atributo inválidoEntrada não possui URLEntrada não possui revisãoErro abortando relatórioErro na entrada %d em arquivo de entradas para '%s'Erro gerando pós-commit de revisão (detalhes a seguir):Erro chamando programa externoErro fechando o diretório '%s'Erro fechando o sistema de arquivosErro fechando arquivo nullErro fechando a ponta de leitura de pipe stderrErro fechando a ponta de escrita do pipe stderrErro comparando '%s' e '%s'Erro durante cópia recursiva de '%s'Erro obtendo 'affected time' para '%s'Erro obtendo 'affected time' de '%s'Erro obtendo 'affected time' em '%s'Erro obtendo UID do processoErro obtendo tamanho de arquivo em '%s'Erro no processo filho: %sErro em limpeza pós-commit (detalhes a seguir):Erro inicializando argumentos de linha de comandoErro modificando entrada para '%s'Erro modificando entrada de '%s'Erro normalizando conteúdos editados para formato internoErro normalizando mensagem de log para formato internoErro abrindo arquivo de trava de bdErro ao fazer parse de propriedade %s em '%s': '%s'Erro ao executar parsing em '%s'Erro ao realizar parsing de argumentosErro ao executar parsing de opções de diffErro processando comando '%s' em '%s'Erro lendo mudanças para chave '%s'Erro lendo resposta de pedido %s enfileiradaErro removendo lista de mudanças da entrada '%s'Erro removendo trava da entrada para '%s'Erro substituindo texto-base de '%s'Erro resolvendo caixa de '%s'Erro restaurando texto para '%s'Error buscando REPORT (%d)Erro rodando '%s': exitcode foi %d, args foram: no diretório '%s', basenames: %s %s %sErro executando 'hook' post-commitErro executando 'hook' post-lockErro executando 'hook' post-unlockErro destravando diretórios travados (detalhes a seguir):Erro validando o certificado de servidor para '%s': Erro esperando pelo processo '%s'Erro ao escrever arquivo de entradas para '%s'Erro escrevendo hash em '%s'Erro escrevendo log para '%s'Erro gravando cadeia: EOF inesperadoErro escrevendo em '%s'Erro gravando em '%s': EOF inesperadoSomente um argumento de arquivo requeridoSomente um nome de propriedade e argumento de arquivo requeridosExcluindo (e descartando revisões vazias para) prefixos: Excluindo prefixos: Era esperado que '%s' fosse um diretório mas um arquivo foi encontradoEra esperado que '%s' fosse um arquivo mas encontrado um diretórioEsperado formato de SA '%d'; encontrado formato '%d'Esperado formato de SA entre '1' e '%d'; encontrado formato '%d'Número de revisão e caminho válidos esperadosEsperado formato de repositório '%d' ou '%d'; encontrado formato '%d'Expira: %s Alvo explícito requerido como argumentoAlvo explícito requerido ('%s' interpretado como valor de propriedade)Exportação completa. Externo exportado na revisão %ld. Exportada revisão %ld. Externo na revisão %ld. Geração de cópia de trabalho de externo completa. Exportação de externo completa. Atualização de externo completa. Falhou ao adicionar diretório '%s': objeto não-diretório com o mesmo nome já existeFalhou ao adicionar diretório '%s': um diretório versionado com o mesmo nome já existeFalhou ao adicionar diretório '%s': um diretório não versionado com o mesmo nome já existeFalhou ao adicionar diretório '%s': argumentos copyfrom ainda não suportadosFalhou ao adicionar o diretório '%s': objeto do mesmo nome como diretório administrativoFalhou ao adicionar arquivo '%s': um objeto não-arquivo com o mesmo nome já existeFalhou ao calcular código MD5 para '%s'Falha ao conectar ao Service Control ManagerFalha ao criar winservice_start_eventFalhou ao apagar mmap '%s'Falhou ao executar WebDAV PROPPATCHFalhou ao obter informação de travaFalhou ao procurar pela etiqueta '%s' para URL '%s'Falhou ao encontrar a hora na revisão %ldFalha ao obter acesso exclusivo ao repositório; talvez outro processo como httpd, svnserve ou svn o tenha aberto?Falha ao obter trava no repositório destino, atualmente de '%s' Falhou ao obter uma nova chave stringFalhou ao carregar módulo para tipo FS '%s'Falhou ao carregar propriedades do discoFalhou ao marcar '%s' ausente: item com o mesmo nome está agendado para inclusãoFalhou ao reverter '%s' -- tente atualizar ao invés. Falhou ao executar hook '%s'; symlink quebradoFalhou ao iniciar hook '%s'Não é possível escrever todo o conteúdo em cadeiaFalhou ao gravar arquivo atualizadoFalha ao carregar 'plugin'Falha ao abrir '%s'Falha lendo rep '%s'Arquivo '%s' já existeArquivo '%s' possui propriedade de tipo mime bináriaArquivo '%s' possui newlines inconsistentesArquivo '%s' possui modificações locaisArquivo '%s' no diretório '%s' não é um recurso versionadoArquivo já existe: sistema de arquivos '%s', revisão %ld, caminho '%s'Arquivo já existe: sistema de arquivos '%s', transação '%s', caminho '%s'Arquivo é imutável: sistema de arquivos '%s', revisão %ld, caminho '%s'Arquivo não encontrado: revisão %ld, caminho '%s'Arquivo não encontrado: transação '%s', caminho '%s'Sistema de arquivos não possui esta entradaSistema de arquivos não possui itemSistema de arquivos não possui tal cópiaSistema de arquivos não possui esta travaSistema de arquivos não possui tal node-rev-idSistema de arquivos não possui esta representaçãoSistema de arquivos não possui tal stringSistema de arquivos já está abertoSistema de arquivos está corrompidoSistema de arquivos não está abertoObjeto sistema de arquivos já está abertoObjeto de sistema de arquivos não foi aberto aindaCaminho de sistema de arquivos '%s' não é nem um arquivo nem um diretórioFiltra de dumpstream nós com os prefixos fornecidos. usage: svndumpfilter exclude PREFIXO_DO_CAMINHO... Filtra de dumpstream nós sem os prefixos fornecidos. usage: svndumpfilter include PREFIXO_DO_CAMINHO... Linha final em arquivo de revisão possui mais de 64 caracteresFaltando espaço na linha final do arquivo de revisãoPrimeira linha de '%s' contém um não-dígitoPrimeira revisão não pode ser maior que a segundaArquivo de formato '%s' contém um não-dígito inesperadoFormato de uma propriedade svn:externals era inválidoUm caminho para cópia de trabalho encontradoCabeçalho mal formado encontrado em arquivo de revisãoErro de framing no protocolo pipeErro genérico do sistema de arquivosObteve elemento apply-textdelta sem add-file ou open-file precedenteObteve conteúdo cdata para prop deleteObteve elemento close-directory sem nunca abrir um diretórioObteve elemento close-file sem add-file ou open-file precedenteObteve caminho fonte mas nenhuma revisão fonte para '%s'Codificação desconhecida recebida '%s'Caminho HTTP não encontradoRepositório svn ilegal '%s'Alvo ilegal para a operação requisitadaRaiz de repositório impossivelmente longa do servidorNo diretório '%s'Incluindo (e descartando revisões vazias para) prefixos: Incluindo prefixos: Versão incompatível de bibliotecaDado incompletoDado de trava incompleto retornadoBloco de propriedade incompleto ou inacabadoEstilos de finais de linha inconsistentesArgumentos incorretos fornecidosParâmetro incorreto fornecidoÍndiceErro de entrada/saídaRelocação inter-repositório não permitidaErro interno: exite um pai desconhecido (%d) para o elemento 'DAV:response' na resposta de MERGEAtributo 'format' inválidoURL inválida '%s'URL inválida: caracter inválido no número da porta do proxyURL inválida: número da porta proxy negativoURL inválida: número da porta do proxy maior que o maior número de porta TCP 65535Argumento '%s' inválido em opção de diffConfiguração authz inválidaTipo de mudança inválido em arquivo revOrdem de mudança inválida: novo ID de revisão de nó sem deleteOrdem de mudança inválida: mudança não-add em caminho removidoTipo de mudança inválidoLinha de mudança inválida em rev-fileConfig inválido: caracter ilegal no valor de máscara de debugConfig inválido: caracter ilegal no valor de timeoutConfig inválido: valor de timeout negativoConfig inválido: não foi possível carregar arquivo de certificados '%s'Config inválido: http authtype '%s' desconhecidoValor de configuração inválidoCaracter de controle '0x%02x' inválido no caminho '%s'Caminho de origem de cópia inválido '%s'Valor inválido de cabeçalho de data de criação na resposta.Cadeia diff inválida: [new] insn %d sobrepõe a nova seção de dadosCadeia diff inválida: [src] insn %d sobrepõe a visão fonteCadeia diff inválida: [tgt] insn %d começa além da posição da visão do alvoCadeia diff inválida: insn %d não pode ser decodificadoCadeia diff inválida: insn %d possui largura não-positivaCadeia diff inválida: insn %d sobrepõe a visão alvoÂncora de editor inválido; ao menos uma dos caminhos de entrada não é um diretório e não há entrada fonteRevisão final inválida %ldFinalizador de entrada inválidoSeqüência de escape inválidaCaracter de escape inválidoToken de arquivo ou diretório inválidos durante ediçãoSintaxe inválida para o caminho do sistema de arquivosNúmero de revisão do sistema de arquivos inválidoNome da transação do sistema de arquivos inválidoTrava inválidaOperação inválida no diretório de trabalho atualFlag prop-mod inválida em rev-fileRealocação inválidaRelatório inválido para nível topo de cópia de trabalhoNúmero de revisão inválido (%ld)Número de revisão informado inválidoEspecificador de revisão inválidoAgendamento inválidoResposta inválida do servidor para requerimento dated-revRevisão inicial inválida %ldTroca inválidaCaminho alvo inválidoFlag text-mod inválida em rev-fileValor inválido de timeoutValor inválido para campo '%s'Linha de versão inválida em entradas do arquivo '%s'item já existe no sistema de arquivositem não é legívelItem não é para ser escritoItem está desatualizadoitem é parcialmente legívelAutor da Última Mudança: %s Data da Última MudançaRevisão da Última Mudança: %ld Arquivos não versionados modificados deixados de ladoFinal de linha outro do que era esperadoLista todas as propriedades em arquivos, diretórios, ou revisões. uso: 1. proplist [CAMINHO[@REV]...] 2. proplist --proprev -r REV [ALVO] 1. Lista propriedades versionadas na cópia de trabalho. Se especificado, REV determina qual revisão de alvo é primeiramente considerada. 2. Lista propriedades não versionadas remotas da revisão do repositório. ALVO só determina qual repositório a acessar. Lista entradas de diretório no repositório. uso: list [ALVO[@REV]...] Lista cada arquivo ALVO e o conteúdo de cada diretório ALVO como existem no repositório. Se ALVO é uma cópia de trabalho, a URL do repositório correspondente será usada. Se especificado, REV determina qual revisão alvo é primeiramente considerada. O ALVO padrão é '.', significando a URL do repositório do diretório de trabalho corrente. Com --verbose, os seguintes campos serão mostrados para cada item: Número da revisão do último commit Autor do último commit Se travado, a letra 'O'. (Use 'svn info URL' para ver detalhes) Tamanho (em bytes) Data e hora do último commit URL local '%s' contém somente o nome de servidor, não caminhoURL local '%s' contém nome de servidor não suportadoURL local '%s' não contém prefixo 'file://'Operações locais, de não-commit não requerem mensagem de log ou propriedades de revisãoEntrada location não é uma listaTrava CriadaTrava ExpiraDono da Trava: %s Token de Trava: %s Comentário de trava contém um byte zeroComentário de trava contém caracteres ilegaisArquivo de comentário de trava é um arquivo versionado; use '--force-log' para sobrescreverElemento de trava não é uma listaTrava falhou: nova versão de '%s' existeArquivo de trava '%s' não é um arquivo regularTrava expirouRequisição de travamento falhou: %d %sResposta de travar não é uma listaToken de trava está incorretoTrava caminhos de cópia de trabalho ou URLs no repositório, assim nenhum outro usuário pode executar neles commit de modificações. uso: lock ALVO... Use --force para roubar a trava de outro usuário ou cópia de trabalho. Comando de log para diretório '%s' está mal localizadoAtributo 'nome' faltando de entrada de log (entrada '%s' para diretório '%s')Entrada de log não é uma listaMensagem de log contém um byte zeroArquivo de mensagem de log é um arquivo versionado; use '--force-log' para sobrescreverEstá faltando checksun MD5Tipo MIME '%s' não contém '/'Tipo MIME '%s' possui um tipo de mídia vazioURL mal formada no repositóriocopyfrom mal formada em linha node-revcopyroot mal formada em linha node-revCabeçalho de arquivo de dump mal formadoCadeia dump mal formada: Revisão 0 não deve conter registros nósLista de erro mal formadaArquivo mal formadoDado de rede mal formadoCabeçalho de representação mal formadoDado skeleton mal formadoCadeia de dados mal formadaDado svndiff mal formado em dado de representaçãoLinha de texto de rep mal formada em node-revConflito de mesclagem durante commiterro de combinação executando 'pop' na pilha de retorno da CTVersão de módulo de FS para '%s' não bate: encontrado %d.%d.%d%s, esperado %d.%d.%d%sVersão de RA não bate para '%s': encontrado %d.%d.%d%s, esperado %d.%d.%d%sFalntando atributo 'destino' em '%s'Falntando atributo 'esquerda' em '%s'Faltando atributo 'revisão' para '%s'Falntando atributo 'direita' em '%s'Falntando atributo 'timestamp' em '%s'Faltando informação para diretório modificado '%s' na revisão %ldFaltando cpath em node-revFaltando entrada padrãoFaltando final de linha em arquivo wcprops para '%s'Faltando finalizador de entradaFaltando o campo kind em node-revFaltando argumento nome em elemento %sFaltando atributo name em elemento add-directoryFaltando atributo name em elemento add-directoryFaltando atributo nome em elemento delete-entryFaltando argumento nome em elemento open-directoryFaltando atributo name em elemento open-directoryFaltando node-id em node-revFaltando argumento caminhoFaltando argumentos propname e caminho do repositórioFaltando argumento propnameFaltando argumentos propname ou caminho do repositórioFaltando argumento de caminho de repositórioFaltando ID de revisão de nó requeridoFaltando a especificação de revisão requeridaFaltando revisãoFaltando atributo revisão em elemento delete-entryFaltando atributo revision em elemento open-directoryFaltando atributo revision em elemento open-directoryFaltando atributo revisão em elemento open-rootFaltando atributo revisão em elemento revisão-alvoModificadoMódulo para acessar um repositório em disco localMódulo para acessar um repositório usando o protocolo de rede svn.Módulo para se trabalhar com um repositório Berkeley DBMódulo para se trabalhar com um repositório de arquivo simples (FSFS)Mudanças entre cópia de trabalho e repositório não são permitidasMúltiplos argumentos de revisão encontrados; não é possível especificar -c duas vezes, ou ambos -c e -rMúltiplos argumentos de revisão encontrados; tente '-r N:M' ao invés de '-r N -r M'Deve especificar revisão como um número, uma data ou 'HEAD' quando operando em uma propriedade de revisãoArgumentos mutualmente exclusivos especificadosNome não se refere a um diretório do sistema de arquivosNome não se refere a um arquivo do sistema de arquivosNome não é um componente de caminho simplesNome: %s Data de expiração negativa passada para svn_fs_lockNeon não conseguir fazer parse de URL '%s'Conexão de rede fechou inesperadamenteErro de leitura/escrita na redeFalhou inicialização de socket de redeNovo nome de entrada requerido ao importar um arquivoNão há entrada '.' em: '%s'Não há caminho de arquivo de autorização disponívelNenhum provedor de autenticação disponívelSem mudanças na propriedade '%s' em '%s' Sem mudanças na propriedade '%s' na revisão %ld Não há commits no repositórioNenhum pai comum encontrado, não é possível operar em argumentos desunidosNão há cópia com id '%s' no sistema de arquivos '%s'Não há entrada padrão no diretório '%s'Nenhum editor externo disponívelNão há trava no caminho '%s' no sistema de arquivos '%s'Nenhum token de trava fornecidoNenhuma parte do caminho '%s' foi encontrada no repositório HEADNão existe tal atributo XMLNão existe tal entrada: '%s'Não existe representação: '%s'Não há revisão %ldNão existe tal transaçãoNenhum token fornecido para o caminho '%s' no sistema de arquivos '%s'Não há transação chamada '%s' no sistema de arquivos '%s'Nenhum usuário associado com o sistema de arquivosNenhum usuário está atualmente associado com o sistema de arquivos '%s'Sem revisão copyfrom válida em cadeia filtradaNão há trava de escrita em '%s'Tipo de Nó: diretório Tipo de Nó: arquivo Tipo de Nó: nenhum Tipo de Nó: desconhecido Caracter não-ASCII (código %d) detectado, e não é possível convertê-lo de/para UTF-8Argumento limite não numérico fornecidoNão-string como parte de conteúdo de arquivoNão estão especificadas todas as revisões requeridasNão autorizado a abrir a raiz da operação de ediçãoPoucos argumentos fornecidosRep nulo, mas offset já passou zeroNúmero é maior que o máximoObjeto não é uma raiz de revisãoObjeto não é uma raiz de transaçãoAtualização obstruídaSomente diferenças entre um caminho de texto-base e seus arquivos de trabalho são suportados neste momentoSomente uma revisão permitidaSomente caminhos relativos podem ser especificados depois de uma URLOperação não se aplica a arquivo binárioOperação não se aplica a diretórioOperação suporta várias fontesOpção --tunnel-user somente é válida no modo tunnel. Gera saída com o conteúdo do arquivo especificado ou URLs com informações in-line de revisão e autor. uso: blame ALVO[@REV]... Se especificado, REV determina qual revisão o alvo é primeiramente considerada. Gera saída com o conteúdo do arquivo ou URL especificado. uso: cat ALVO[@REV]... Se especificado, REV determina qual revisão o alvo é primeiramente considerada. Dono: %s Frase-chave para '%s': Senha para '%s': Caminho '%s' já existeCaminho '%s' não existeCaminho '%s' não existe na revisão %ldcaminho '%s' não existe na revisão HEADCaminho '%s' não existe na revisão %ldCaminho '%s' termina em '%s', que não é suportado para esta operaçãoCaminho '%s' não possui revisão com commitCaminho '%s' já está travado pelo usuário '%s' no sistema de arquivos '%s'Caminho '%s' não é mais um membro da lista de mudanças. Caminho '%s' não é uma URLCaminho '%s' não é um diretórioCaminho '%s' não é um arquivoCaminho '%s' agora é um membro da lista de mudanças '%s'. Caminho '%s' não está travado. Caminho '%s' não encontrado na revisão headCaminho '%s' não encontrado na revisão %ldCaminho '%s' não presenteCaminho não possui token de travaCaminho já está travadoCaminho não é uma stringCaminho não é o diretório de trabalhoCaminho não é um arquivo de trabalhoCaminho está travadoSintaxe de caminho não suportado neste contextoCaminho: %s Caminho não terminado por ':'EOF prematuro visto para servidorFim prematuro de dados de conteúdo em cadeia dumpProblema na primeira entrada de log na cópia de trabalhoProblema rodando logProcesso '%s' falhou (exitwhy %d)Processo '%s' retornou código de erro de saída %dElemento prop diff não é uma listapropriedade em '%s' Propriedade '%s' é uma propriedade de entradaPropriedade '%s' é uma propriedade regularPropriedade '%s' não encontrada no caminho '%s' na revisão %ldPropriedade '%s' não encontrada no caminho '%s' na transação %sPropriedade '%s' não encontrada na revisão %ldPropriedade não encontradaElemento proplist não é uma listaErro de protocolo: a resposta MERGE para o recurso '%s' não retornou todas as propriedades que pedimos (e são necessárias para completar o commit)Erro de protocolo: dissemos ao servidor para não auto mesclar nenhum recurso, mas ele respondeu que '%s' estava mescladoColoca arquivos e diretórios sobre controle de versão, agendando-os para serem incluídos no repositório. Estes serão incluídos no próximo commit. Exceção Python foi setada com o erroCamada RA não recebeu informações de requisição OPTIONSCamada RA falhou ao criar requisição HTTPCamada RA falhou ao buscar propriedadesCamada RA falhou ao inicializar camada socketArquivo de camada RA já existeRequisição de camada RA falhouManipulador de resposta de REPORT falhou ao completar o drive do editorREVISÃO CAMINHO -------- ---- REVISÃO CAMINHO -------- --------- Esgotaram-se os nomes únicosAcesso de leitura recusado para a raiz da ediçãoErro de leitura em pipeLendo '%s'Leitura de stdin está desabilitadaLendo uma janela de leitura svndiff além do fim da representaçãoRecuperador encontrou uma representação deltificada de um diretórioRecuperador encontrou um nó não-diretórioRecursivamente limpa a cópia de trabalho, removendo travas, restaurando operações não terminadas, etc. uso: cleanup [CAMINHO...] Referência para nó não existente '%s' no sistema de arquivos '%s'Revisão fonte %ld relativa não está disponível no repositório correnteRelocação só pode mudar a parte repositório de uma URLRemove uma propriedade de arquivos, diretórios, ou revisões. uso: 1. propdel NOMEPROP [CAMINHO...] 2. propdel NOMEPROP --revprop -r REV [ALVO] 1. Remove propriedades versionadas na cópia de trabalho. 2. Remove propriedades não versionadas remotas da revisão do repositório. ALVO só determina qual repositório a acessar. Remove revisões esvaziadas por filtragem.Removida trava de '%s'. Renumera revisões esvaziadas por filtragem.Rep '%s' mutável e non-fulltextCaminho '%s' não é mutávelConteúdos de rep são muito grandes: obteve %s, limite é %sSubstituíndo %s Raiz do Repositório: %s URL do repositório é requerida ao importarUUID do repositório: %s Acesso ao repositório é necessário para esta operaçãoMétodo de acesso ao repositório não implementadoArgumento do repositório requeridoArgumento do repositório requerido Falhou a criação do repostitórioRepositório foi movidoRepositório não possui UUIDRepositório não foi habilitado para aceitar propchanges de revisões; peça ao administrador para criar um hook pre-revprop-changeTrava de repositório adquirida.Por favor aguarde; recuperar o repositório pode levar algum tempo... Repositório movido permanentemente para '%s'; por favor execute 'relocate'Repositório movido temporariamente para '%s'; por favor execute 'relocate'Representação está sendo escritaRepresentação não é do tipo 'delta'Estado de conflito resolvido para '%s' Restaura o arquivo original da cópia de trabalho (desfaz a maior parte das edições locais). uso: revert CAMINHO... Nota: este sub-comando não requer acesso à rede, e resolve qualquer estado de conflito. Entretanto, não restaura diretórios removidos. Restaurado '%s' Revertido '%s' Feito commit de revisão %ld como %ld. Revisão %ld não bate com revisão existente %ld em '%s'Revisão %ld pulada. Revisão sendo atualmente copiada (%ld), última versão com merge (%ld), e destino HEAD (%ld) são inconsistentes; você fez commit para o destino sem usar svnsync?Entreada de revisão não é uma listaArquivo de revisão não possui 'newline' finalPropriedade de revisão '%s' não permitida neste contextoPar de propriedade de revisão está vaziaFaixa de revisão não é permitidaTipo de revisão requer uma cópia de trabalho, não uma URLRevisão: %ld Revisões não podem ser maiores que a revisão mais nova (%ld)Revisões renumeradas como a seguir: Objeto raiz tem que ser uma raiz de transaçãoErro de SQLiteSLL não é suportadoDado seguro '%s' era seguido de byte não-ASCII %d: não foi possível convertê-lo de/para UTF-8Agendado: incluir Agendado: apagar Agendado: normal Agendado: substituir Segunda revisão requeridaEnvia mudanças da sua cópia de trabalho para o repositório. uso: commit [CAMINHO...] Uma mensagem de log deve ser fornecida, mas pode ser vazia. Se não for fornecida por uma opção --message ou --file, um editor será iniciado. Se qualquer alvo estão (ou contém) itens travados, estes serão destravados após um commit com sucesso. Enviando %s Servidor não enviou a raiz do repositórioServidor não suporta operações baseadas em datasServidor não suporta funcionalidade de travamentoServidor não suporta setar revisões de propriedades arbitrárias durante commitServidor não suporta o comando get-lockServidor não suporta o comando de travamento (lock)Servidor não suporta o comando replayServidor não suporta o comando de destravamento (unlock)Servidor requer versão mínima %dResposta do servidor não possui propriedade deadprop-count esperadaServidor enviou valor de retorno inválido (%d %s) na resposta a %s pedido por '%s'Sessão tem raiz em '%s' mas a raiz do repositório é '%s'Seta novo valor para propriedade '%s' em '%s' Seta novo valor para propriedade '%s' na revisão %ld Setar propriedade em alvo não local '%s' requer uma revisão baseSetar propriedade recursivamente em alvo não local '%s' não é suportadoTamanho dos dados descomprimidos não bate com o comprimento original armazenadoPulou '%s' Pulando alvo perdido: '%s' Omitindo arquivo binário: '%s' Algo está errado com o conteúdo do log de mensagensDesculpe, svn_client_diff4 foi chamado de uma maneira que ainda não é suportadaFonte '%s' não é um diretórioURL fonte '%s' é de um repositório estrangeiro; deixando-o como uma cópia de trabalho disjuntaOrigem e destino parecem não estar no mesmo repositório (orig: '%s'; dest: '%s')URL fonte '%s' é de um repositório diferenteCódigo especial para empacotar erros de servidor para reportar ao clientePropriedades padrões nõ podem ser setadas explicitamente como propriedades de revisãoInício de revisão %ld é maior que final da revisão %ldRevisão de início deve preceder revisão de finalStatus contra revisão: %6ld Armazenamento de propiedade não regular '%s' não é permitida através da interface do repositório, e pode indicar um bug em seu clienteString não representa nó ou node-rev-idTamanho da string maior que o máximoSub-comando '%s' não aceita a opção '%s' Digite 'svn help %s' para uso. Sub-comando '%s' não aceita opção '%s' Digite 'svnadmin help %s' para uso. Sub-comando '%s' não aceita opção '%s' Digite 'svndumpfilter help %s' para uso. Sub-comando '%s' não aceita opção '%s' Digite 'svnlook help %s' para uso. Sub-comando '%s' não aceita a opção '%s' Digite 'svnsync help %s' para uso. Argumento do sub-comando requerido Subversion é uma ferramenta para controle de versão. Para mais informações, veja http://subversion.tigris.org/ Status de edição com sucesso retornado muito cedoId sucessor '%s' (para '%s') já existe no sistema de arquivos '%s'A soma dos tamanhos dos subblocos é maior que o tamanho total do conteúdo do blocodiff sumarizado só pode comparar repositório com repositórioDados comprimidos de svndiff são inválidosSvndiff possui janela de cabeçalho corrompidaDado svndiff contém vizão de código ao contrárioDados de svndiff possui janela corrompidaDado svndiff contém instrução inválidaDado svndiff termina inesperadamenteDados de svndiff possui cabeçalho inválidoSvndiff contém views de fontes ao contrárioSvndiff possui cabeçalho inválidoInconsistência de tamanho de origem de Svndiff'Symbolic links' não são suportados nesta plataformaErro de sintaxe no argumento de fim de linha nativo '%s'Erro de sintaxe no argumento de revisão '%s'Erro de sintaxe ao fazer parse de revisão '%s'Listas de alvos para diff não podem conter caminhos de cópia de trabalho e URLs ao mesmo tempoTeste falhouTexto da Última MudançaBloco delta de texto não é uma listaA requisição %s retornou XML inválido na resposta: %s (%s)A resposta CHECKOUT não contém o cabeçalho 'Location:'As variáveis de ambiente EDITOR, SVN_EDITOR ou VISUAL ou a opção de tempo de execução run- 'editor-cmd' está vazia ou contém somente espaços. Espera-se um comando shell.A resposta de propriedade MERGE tem um status de erroA resposta de OPTIONS não inclui o activity-collection-set requisitado; isso normalmente significa que a URl não entende WebDAVA URL '%s' possui uma raiz de repositório diferente de seu paiA propriedade UUID não foi encontrada no recurso ou em nenhum de seus paisA propriedade VCC não foi encontrada no recursoO arquivo '%s' mudou inesperadamente durante diffO relatório file-revs não possuía nenhuma revisãoOs seguintes módulos de acesso ao repositório (RA) estão disponíveis: Os seguintes módulos de acesso ao repositório (FS) estão disponíveis: O comando get-file-revs não retornou nenhuma revisãoA última revisão do respositório é %ld. A localização de '%s' para revisão %ld não existe no repositório ou refere-se a um objeto não relacionadoO comentário da trava é um caminho de arquivo (a intenção era -F?); use '--force-log' para sobrescreverO arquivo de log de mensagem está sobre controle de versãoA mensagem de log é um caminhoA mensagem de log é um caminho de arquivo (a intenção era -F?); use '--force-log' para sobrescreverA operação foi interrompidaO caminho não era parte de um repositórioA propriedade relative-path não foi encontrada no recursoO repositório em '%s' tem uuid '%s', mas a CT tem '%s'O repositório está travado, talvez para recuperação de bdA resposta do pedido continha ao menos um erroA resposta contém uma linha de estado HTTP fora de padrãoA raiz do diretório não pode ser apagadaO serviço falhou ao iniciarO serviço falhou ao iniciar; um erro interno ocorreu ao iniciar o serviçoA opção de diff especificada não é suportadaA transação especificada não é mutávelJá existe um item versionado '%s'Não há mudança 0Esta é uma revisão vazia para percorrer.Token '%s' não aponta para nenhuma trava no sistema de arquivos '%s'Muitos argumentos fornecidosMuitos argumentos para o comando importMuitos itens aninhadosTransação '%s' não é baseada em uma revisão; que estranhoTransação '%s' removida. Transação abortada, mas limpeza falhouLimpesa de transação falhouTransação está mortaTransação está morta: '%s'Transação não está mortaTransação não está morta: '%s'Transação está desatualizadaTransação desatualizadaTransmitindo dados do arquivo Tentoou uma operação de versionamento em um recurso não versionadoTentativa de mudar uma representação imutávelTentar 'svn add' ou 'svn add --non-recursive' ao invés?Tente 'svn help' para mais informaçõesTente 'svnadmin help' para mais informaçõesTente 'svndumpfilter help' para mais informaçõesTente 'svnlook help' para mais informaçõesTente 'svnsync help' para mais informaçõesTentando adicionar nova propriedade '%s' com valor '%s', mas a propriedade já existe com valor '%s'.Tentando mudar a propriedade '%s' de '%s' para '%s', mas a propriedade já existe com valor '%s'.Tentando modificar propriedade '%s' de '%s' para '%s', mas a propriedade não existe.Tentando usar uma funcionalidade não suportadaEsquema de túnel %s requer que variável de ambiente %s seja definidaDois relatórios top-level sem alvosDois recursos versionados não são relacionadosDigite '%s --help' para uso. Digite '%s help' para uso. Digite 'svnversion --help' para uso. URL '%s' contém um elemento '..'URL '%s' não existeURL '%s' não bate com URL existente '%s' em '%s'URL '%s' não está codificada como URI corretamenteURL '%s' não existente na revisão %ldURL '%s' não existente nesta revisãoURL '%s' refere-se a um diretórioURL '%s' se refere a um arquivo, não a um diretórioURL não possui esquema: '%s'URL: %s URLs não possuem esquema ('%s' e '%s')Token UUID: %s Não foi possível verificar existência do caminho '%s'Não foi possível criar diretório de transação em '%s' para a revisão %ldNão foi possível extrair dados do cabeçalho de respostaNão foi possível encontrar localização de repositório para '%s' na revisão %ldNão foi possível localizar o arquivo de autorizaçãoNão foi possível travar '%s'Não é possível travar/destravar entre vários repositóriosNão foi possível criar quaisquer diretóriosNão foi possível criar o nome para '%s'Não foi possível abrir uma sessão ra_local para URLNão foi possível abrir para leitura o arquivo de autorizaçãoNão foi possível abrir o para escrita arquivo de autorizaçãoNão foi possível abrir repositório '%s'Não foi possível abrir raiz da ediçãoEsquema de túnel '%s' não definidoEOF inesperado na cadeiaEOF inesperado ao escrever o conteúdoFim inesperado de entradaFim inesperado de entrada de svndiffNó imutável inesperado em '%s'Tipo de nó inesperado encontradoTipo de propriedade não esperado ou desconhecidoResposta do servidor não esperada para autenticaçãoInesperadamente encontrou '%s': caminho está marcado como 'faltando'Sistema de arquivos desconhecidoTipo de FS desconhecido '%s'Codificação XML desconhecida: '%s'Método de autorização desconhecidoComando desconhecido '%s'Comando desconhecido: '%s' Tipo de entrada desconhecido para '%s'Nome de servidor '%s' desconhecidoTipo de nó desconhecido para '%s'Tipo de nó desconhecido para representação '%s'Tipo para o caminho '%s' desconhecido ou inesperadoTipo desconhecido ou não versionável para '%s'Status '%s' desconhecido em resposta de comandoEstado desconhecido para comando de travaEstado desconhecido para comando destravarComando de protocolo svn desconhecidosvn_node_kind desconhecidoRequisição de destravamento falhou: %d %sResposta de destravar não é uma listaDestravamento completou com sucesso, mas hook post-unlock falhouDestrava caminhos de cópia de trabalho ou URLs. uso: unlock ALVO... Use --force para quebrar a trava. Agendamento não mesclável requerido em uma entradaCaminho ilegível encontrado; acesso negadoEsquema URL não reconhecido '%s'Esquema URL não reconhecido para '%s'Codificação de dado binário desconhecida; não é possível decoficarEstilos de finais de linha não reconhecidosElemento de arquivo de log '%s' não reconhecido em '%s'Tipo de nó não reconhecido: '%s'Ação em nó não reconhecida no nó '%s'Tipo de registro não reconhecido na cadeiaTipo de revisão não reconhecido requisitado por '%s'Cadeia de dados não reconhecidaMensagem de error não especificadaFormato de SA não suportadoVersão de FS loader (%d) não suportada para bdbVersão (%d) de FS loader não suportada para fsfsVersão de loader RA (%d) não suportada para ra_localVersão de RA loader (%d) não suportada para ra_serfVersão (%d) de RA loader não suportada para ra_svnVersão ABI de plugin RA não suportadaVersão de arquivo de dump não suportada: %dTipo de nó não suportado para caminho '%s'Versão de repositório não suportadaFormato de cópia de trabalho não suportadoPropriedades não versionadas na revisão %ld: Atualização compelta. Externo atualizado para revisão %ld. Atualizado para revisão %ld. Use --force para sobrescrever esta restriçãoUsuário %s não possui trava no caminho '%s' (atualmente travado por %s)Usuário '%s' está tentando usar uma trava pertencente a '%s' no sistema de arquivos '%s'Nome do usuário não bate com dono da travaUsuário: Dado UTF-8 válido (hex:%s) seguido por seqüência UTF-8 inválida (hex:%s)Valor não será setado a menos que seja forçadoFormato de arquivo de versão incorretoVersão não bate em '%s': encontrado %d.%d.%d%s, esperado %d.%d.%d%sAVISO: Referenciando dado em revisão %ld, que é mais antiga que a revisão AVISO: extraída mais antiga (%ld). Carregando este dump em um repositório AVISO: vazio irá falhar. Esperando pela trava de repositório; talvez outro processo a tenha aberto? Ao especificar caminhos de cópia de trabalho, somente um alvo deve ser fornecidoAo preparar '%s' para commitCópia de trabalho '%s' não está travadaCópia de trabalho '%s' travadaFormato de cópia de trabalho de '%s' é muito antigo (%d); por favor gere sua cópia de trabalho novamenteCópia de trabalho está corrompidaCópia de trabalho não está atualizadaCópia de trabalho não está travada; isto é provavelmente um bug, por favor reporteCaminho de cópia de trabalho '%s' não existe no repositórioTexto base de cópia de trabalho está corrompidoEscrita não permitida: não autorizado a ler todas as revisões %ldErro de escritaTrava de escrita roubada em '%s'Número errado de alvoes informadosDado XML não estava bem formatadoParser de XML falhou em '%s'Você deve especificar exatamente um entre -d, -i, -t ou -X. Seu diretório .svn/tmp pode estar faltando ou corrompido; rode 'svn cleanup' e tente novamenteSua mensagem de commit foi deixada em um arquivo temporário:[Saída de erro não pode ser lida.][Saída de erro não pode ser traduzida da locale nativa pra UTF-8.]alocando novo ID de cópia (obtendo 'next-key')alocando novo nó de ID (obtendo 'next-key')alocando nova representação (obtendo next-key)autorização falhouseja 'verbose'blame da revisão de TRABALHO não é suportadogerando próxima chave de cópiagerando próxima chave de ID de nógerando nova chave de representaçãopassa por cima do sistema de 'hook's do repositóriochama hook após mudar propriedades das revisõeschama hook antes de mudar propriedades das revisõeschama hook post-commit após executar commit nas revisõeschama hook pre-commit antes de executar commit nas revisõesfechando cursor de mudançasconecta ao repositório fonte com senha ARGconecta ao repositório fonte com nome de usuário ARGconecta ao repositório sync com senha ARGconecta ao repositório sync com nome de usuário ARGnão foi possível conectar-se ao servidorcriando mudançacriando cursor para ler uma stringcriando cursor para ler mudançasmode daemonapagando mudançasapagando entrada de tabelas 'copies'apagando entrada de tabela 'nodes'apagando representaçãodesce recursivamente, mesmo que --depth=infinitydesabilita remoção automática de arquivo de log [Berkeley DB]desabilita propriedades automáticasdesabilita fsync em transação commit [Berkeley DB]mostra esta ajudamostra informações de atualizaçãodesconsidera o ignorar padrão e a propriedade svn:ignorenão usa prompt interativonão guarda tokens de autenticação em cachenão cruzar cópias ao percorrer o históriconão gera o final de linha finalnão imprime diferenças para arquivos incluídosnão imprime diferenças para arquivos apagadosnão destrava os alvospronto. gera dump incrementalhabilita propriedades automáticasexportado%sbuscando mudançasforça operação a rodarforça somente para leitura, ignorando o arquivo de configuração de repositórioforça a validade da fonte de mensagem de loguso geral: svnadmin SUB-COMANDO CAMINHO_REPOS [ARGS & OPÇÕES ...] Digite 'svnadmin help ' para ajuda em um sub-comando específico. Digite 'svnadmin --version' para ver a versão do programa e dos módulos FS. Sub-comandos disponíveis: uso geral: svndumpfilter SUB-COMANDO [ARGS & OPÇÕES ...] Digite 'svndumpfilter help ' para ajuda em um sub-comando específico. Digite 'svndumpfilter --version' para ver a versão do programa. uso geral: svnlook SUB-COMANDO CAMINHO_REP [ARGS & OPÇÕES ...] Nota: qualquer sub-comando que leve as opções '--revision' e '--transaction irá, se invocado sem uma destas opções, atuar na revisão mais nova do repositório. Digite 'svnlook help ' para ajuda em um sub-comando específico. Digite 'svnlook --version' para ver a versão do programa e dos módulos FS. Sub-comandos disponíveis: uso geral: svnsync SUB-COMANDO CAMINHO_REPOS [ARGS & OPÇÕES ...] Digite 'svnsync help ' para ajuda em um sub-comando específico. Digite 'svnsync --version' para ver a versão do programa e dos módulos RA. Sub-comandos disponíveis: obtém uuid de repositóriogerar saída própria para concatenaçãoignora ancestral ao calcular mesclagemignore qualquer UUID de repositório encontrado na cadeiaignora definições externasmodo inetdmantém caminho na cópia de trabalhoúltimo modificado ao invés de revisão atualcarrega no diretório especificado no repositóriomarca revisão como mesclada (use com -r)número máximos de entrada de logArquivo next-id corrompidosem progressos (somente erros) em stderrconsidera ancestral ao calcular diferençasobsoleto; tente --depth=files ou --depth=immediatesopera em uma propriedade de revisão (use com -r ou -t)opera em uma propriedade de revisão (use com -r)opera somente em um diretóriosaída em XMLpassa o conteúdo do arquivo ARG como argumentos adicionaisimprime o mínimo possívelimprime diferenças contra a cópia de origemmostra informações extraspropriedade '%s' apagada de '%s'. propriedade '%s' apagada da revisão %ld do repositório propriedade '%s' setada em '%s' propriedade '%s' setada na revisão %ld no repositório lê configuração de arquivo ARGler comentários de trava do arquivo ARGler mensagem de log do arquivo ARGler valor de propriedade do arquivo ARGlê arquivos de configuração do usuário do diretório ARGlendo cópialendo revisão de sistema de arquivoslendo revisão de nólendo representaçãorelocar via regravação de URLremove associação de lista de mudançasremove arquivos redundantes de log Berkeley DB do repositório origem [Berkeley DB]raiz do diretório a servirseta UUID de repositório para o encontrado na cadeia, se houver algumseta uuid de repositóriomostra um sumário dos resultadosmostra detalhes de cópiasmostra caminhos completos ao invés de indentá-losmostra ajuda em um sub-comandomostra ids de revisões de nó em cada caminhomostra informação de versão do programaespecifica uma senha ARGespecifica uma senha ARG (descontinuado; veja --source-password e --sync-password)especifica um nome de usuário ARGespecifica um nome de usuário ARG (descontinuado; veja --source-username e --sync-username)especifica comentário de trava ARGespecifica mensagem de log ARGespecifica revisão número ARGespecifique número de revisão ARG (ou faixa X:Y)especifica transação número ARGarmazenando registro de cópiaarmazenando revisão de nóarmazenando representaçãoarmazenando registro de transaçãoargumento de sub-comando requerido svn: rode 'svn cleanup' para remover travas (digite 'svn help cleanup' para detalhes) Dado de svndiff requer fonte não existentesvndiff requeriu posição além do final da cadeiaTamanho da janela svndiff está corrompidosvnserve: Caminho raiz '%s' não existe ou não é um diretório. svnserve: A flag --service somente é válida se o processo é iniciado pelo Service Control Manager. system('%s') retornou %da mudança feita pela revisão ARG (como -r ARG-1:ARG) Se ARG é negativo isso é como -r ARG:ARG-1estourou o tempo de espera ao aguardar o servidortratar valor como estando na codificação de conjunto de caracteres ARGtenta a operação mas não faz mudançasmodo tunneltipo de repositório: 'fsfs' (padrão) ou 'bdb'desconhecidouso: svn [opções] [args] Cliente de linha de comando Subversion, versão %s. Digite 'svn help ' para ajuda neste sub-comando específico. Digite 'svn --version' para ver a versão do programa e de módulos RA ou 'svn --version --quiet' para ver somente o número da versão. Vários sub-comandos têm arquivos e/ou diretórios como argumentos, sendo recursivos para diretórios. Se argumentos não forem passados para tais comandos, será executado de forma recursiva no diretório atual (inclusive) como padrão. Sub-comandos disponíveis: uso: svnadmin crashtest CAMINHO_REPOS Abre o repositório em CAMINHO_REPOS e então aborta, simulando um processo que falhou enquanto mantém um handle de repositório aberto. uso: svnadmin create CAMINHO_REPOS Cria um repositório novo e vazio em CAMINHO_REPOS uso: svnadmin deltify [-r INFER[:SUPER]] CAMINHO_REPOS Roda sobre a faixa de revisões requisitada, performando deltificação de predecessor nos caminhos mudados nestas revisões. Deltificação em essência comprime o repositório por só armazenar as diferenças ou delta da revisão predecessora. Se revisões não forem especificadas, simplismente irá deltificar a revisão HEAD. uso: svnadmin help [SUB-COMANDO...] Descreve o uso deste programa ou seus sub-comandos. uso: svnadmin hotcopy CAMINHO_REP NOVO_CAMINHO_REP Faz uma cópia sem interrupção ('hot copy') de um repositório. uso: svnadmin list-dblogs CAMINHO_REP Lista todos os arquivos de log Berkeley DB. AVISO: Modificar ou apagar arquivos de log que ainda estão em uso deixarão o repositório corrompido. uso: svnadmin list-unused-dblogs CAMINHO_REP Lista os arquivos de log Berkeley DB não usados. uso: svnadmin load CAMINHO_REP Lê uma cadeia formatada como arquivo dump da entrada padrão, fazendo commit das novas revisões no sistema de arquivo do repositório. Se o repositório estava previamente vazio, por padrão, seu UUID será modificado para aquele especificado na cadeia. Indicação de progresso é© enviada à saída padrão. uso: svnadmin lstxns CAMINHO_REP Mostra os nomes de todas as transações sem commit. uso: svnadmin recover CAMINHO_REP Roda o procedimento de recuperação em um repositório. Faça isto se você tiver erros indicando que a recuperação deve ser executada. A recuperação Berkeley DB requer acesso exclusivo ao repositório e terminará se este estiver em uso por outro processo. uso: svnadmin rmlocks CAMINHO_REP CAMINHO_TRAVADO... Remove incondicionalmente travas de cada CAMINHO_TRAVADO. uso: svnadmin rmtxns CAMINHO_REP NOMETRANS... Apaga a(s) transação(ões) indicada(s). uso: svnadmin setlog CAMINHO_REP -r REVISÃO ARQUIVO Seta a mensagem de log em REVISÃO com o conteúdo de ARQUIVO. Use --bypass-hooks para evitar disparar os 'hook's relacionados às propriedades (por exemplo, se você não quer que um email de notificação seja enviado pelo seu 'hook' de propriedade, ou porque as modificações de propriedades de revisão não foram habilitadas neste 'hook'). NOTA: propriedades de revisões não são versionadas, então este comando sobrescreverá a última mensagem de log. uso: svnadmin setrevprop CAMINHO_REP -r REVISÃO NOME ARQUIVO Seta a propriedade NOME na revisão REVISÃO para o conteúdo de ARQUIVO. Use --use-pre-revprop-change-hook/--use-post-revprop-change-hook para disparar disparar os 'hook's relacioados às propriedades da revisão (por exemplo, se você quiser que um email de notificação seja enviado de seu hook post-revprop-change). NOTA: propriedades de revisões não são versionadas, então este comando sobrescreverá o última valor da propriedade. uso: svnadmin verify CAMINHO_REP Verifica os dados armazenados no repositório. uso: svnlook author CAMINHO_REP Mostra o autor. uso: svnlook cat CAMINHO_REP CAMINHO_ARQ Mostra o conteúdo de um arquivo. Iniciar CAMINHO_ARQ com '/' é opcional. uso: svnlook changed CAMINHO_REP Mostra os caminhos que foram mudados. uso: svnlook date CAMINHO_REP Mostra a identificação de data ('datestamp'). uso: svnlook diff CAMINHO_REP Mostra diff no estilo GNU dos arquivos e propriedades mofidicadas. uso: svnlook dirs-changed CAMINHO_REP Mostra os diretórios que foram eles mesmos modificados (edição de propriedades) ou aqueles cujos arquivos filho foram modificados. uso: svnlook help [SUB-COMMANDO...] Descreve o uso deste programa ou seus sub-comandos. uso: svnlook history CAMINHO_REP [CAMINHO_NO_REP] Mostra informações sobre o histórico de um caminho no repositório (ou o diretório raiz se o caminho não for informado). uso: svnlook info CAMINHO_REP Mostra o autor, data/hora, tamanho da mensagem de log, e a mensagem de log. uso: svnlook lock CAMINHO_REP CAMINHO_NO_REP Se uma trava existe no caminho no repositório, a descreve. uso: svnlook log CAMINHO_REP Mostra a mensagem de log. uso: svnlook tree CAMINHO_REP [CAMINHO_NO_REP] Mostra a árvore, começando em CAMINHO_NO_REP (se informado, ou na raiz da árvore caso contrário), opcionalmente mostrando os ids de revisão dos nós. uso: svnlook uuid CAMINHO_REP Mostra o UUID do repositório. uso: svnlook youngest CAMINHO_REP Mostra o número da revisão mais nova. uso: svnsync copy-revprops URL_DEST [REV[:REV2]] Copia as propriedades de revisão em uma faixa de revisões fornecida para o destino a partir da fonte a qual foi inicializada. Se REV e REV2 são fornecidos, copia as propriedades para as revisões especificadas para esta faixa, inclusive. Se somente REV é fornecido, copia as propriedades somente para esta revisão. Se REV não é fornecido, copia as propriedades de todas as revisões previamente transferidas para o destino. REV e REV2 devem ser revisões que foram previamente transferidas para o destino. Você pode usar "HEAD" para qualquer revisão para significar "a última revisão transferida". uso: svnsync help [SUB-COMANDO...] Descreve o uso deste programa ou seus sub-comandos. uso: svnsync synchronize URL_DEST Transfere todas as revisões pendentes de origem para destino com as quais foi inicializado. usa ARG como comando diffusa ARG como editor externousa ARG como comando mergeusa ARG como novo alvousa ARG como alvo antigousa um marcador de fim de linha diferente do padrão marcador do sistema para arquivos com propriedade svn:eol-style setada para 'nativa'. ARG pode ser um entre 'LF', 'CR', 'CRLF'use deltas na saída de dumpuse formato compatível com Subversion versão anterior à 1.4use formato compatível com Subversion versão anterior à 1.5usa semântica estritaaguarde ao invés de sair se o repositório está em uso por outro processo070701000851a9000041ed0000000000000000000000034cb5500a00000000000000b500010002ffffffffffffffff0000001f00000000root/usr/local/share/locale/sv070701000851aa000041ed0000000000000000000000024cb5500a00000000000000b500010002ffffffffffffffff0000002b00000000root/usr/local/share/locale/sv/LC_MESSAGES070701000851ab000081a40000000000000000000000014cb55006000278a5000000b500010002ffffffffffffffff0000003900000000root/usr/local/share/locale/sv/LC_MESSAGES/subversion.moJl*Tq qC q%dqqq"q,qr)r :rHrdrrrrrr)r %s,Fsvss%stt1tCt Ut#`tt!ttt'tu%&u*Lu wu.uuu#uv"8v"[v~v&vv v+v'w0Gw(xw.w0w2x%4x'ZxAx@x+y1y*Iyty%yyy,y1zJz$ezz$z'z&z!{i3{8{){||*|%G|m|||&||4|$}->}Bl}&}}&}~+=~i~$~"~8~  7/Q7!<DBd>Ā0949n26+)G8qÄք&'+Sr2$<9"\+n&$)A-R'#,̇41.-`48È<.9,h6'̉90.._(,66%R5x,$ۋ$?TFo?:41)fB+0=AnBA 5 ?JY i;NJb|%ڐ&!<Rc~<ё3'32[2# "4A?v?&9$Y~Ŕ'ٔ(*< Yz<,.C+r?"ޖ%'7;s"͗ !5T$n78<Tn~řי&7Sh"#՚ +"=`rR|uϜ%'C$k$6"$4 S$t2&̞(8Uq &'=%Lr7Ϡ>>^?=ݡO-k3G͢/1E<w7 ! )/&Y/9W%B h<;ƥ;;><zA6'0#X|  eƨ,<Z&jP88JcVA>R@ӫ? Tb22Ҭ6%2\*-."0(S| #&=;$y.9%&$L6qA=(;=Ay291(ZOv$Ʋu(a%,ݳ. $( &*AlD ޸0Fay!ܹ 1Mpi!ں$$!Fc*&1%X>~Sؿa,#GU/p9-,.5&d3<$!;U&m$!@BS'*61!Q s2+ :*YQp+5.Kd%|&#& %2%X~/)/4M0'%#"I)l)'! 'EWb-.Cr#$%&"L8o700&*W : !9 G#Y}TBXUJ'<,d'" &#?nc@&0#WS{/''%Ag'# !-7O=A='E+m&"%2Xv)6b>e5)=%g+/'+JCc#<>/Gw*+!73k)1LR'eh3"'VI~% <*7g 52 &=4d*/A.<pI.4&6[j/G%a"# 2!-O,b , $3!Gi,!.GY*p c 0, 06g !D"):$d,B +CL### #1U>o !(7*`$LE ` %!%9Jd,z*%*)P+z&..,H u!'-/*O*z00A1R7RL]\&-(#8 \.f!&$-J`$|$,? 'L"t'1%?So/,"8-QK -#N(r-& ,MV_0'%)3OP #<(U(~?#; G^{$# "$9^~) +,= Q'r"'4'Mud6,0.]&#$ <1  n *  #   D u[ 6 C 6L + &  ( & = /U   &  . (A^|yWB55%&"LoVet8$2#V5t>!&AQV=E#X-|(+')')Q"{<4(09?jF? 1?]2yGN,b;3((|G/!IS`Mh (><:."i&2$) 5T*t#1(&9"`E < :B /}  <-!Ej!.!.!1"=@"?~"5"""h#P#-##O$m$%$8$9$1$%$V%{%R%*%(&&>&e&&z&A&&$&!'47'l'''''''(.(I(a(7y(+(3(])^o)R)$!*?F*$*%***$ + .+O+0f+$+%+&+ ,*(,S,k,#t,,',?,+-;<-x--2---).$@.$e....../3/!S/u/#/,/1/0#080S0p00000)0(1&<1'c11!11122-82]f2,2*23 93/Z33)33%3"4-94g44*4+4/4.5-L5!z5 5#556( 6I6"[6~6(6?6B7"D7 g7Er7#77?7<8A8@)9j99U99:>0:3o:!:9: : ;!%;G;d;2~;R;1<+6<+b<0<< <.<=$===!]=*=+=0=0>8>O>k>${>#> >>">!?&?0>?o?1???1?@"9@,\@"@(@*@AA A3A OAZAkA2A$AABC3EF&)F'PF)xFF F*F)FG=G#RG,vG2G,G H $H,2H_H){HH!H3HI-.I\I|I!I0I IIJ-JDJ_Jh}JJ.K0KDKbK)zKK$K KLL2LKLcL*LLLLLM#MMAM*M/M Me NqN}NO,%O!RO tO-OOOQQJRtR]TUoTTSzU$UTVfHWPWXYO[4\n5\F\5\W!]y]\ ^h^` _im_6_`=`H`\Haaaaa b)bc\5cc`cdeHe&e#f>f"Zf2}fff f%f!g#0g$Tgyggg.gg) h3h(hhhhi !i%.iTi(oi ii"ii!i&jEj5bjjjjj j k7k0Rkk#k-k1k=l.Ul4l1l/lm0;m5lmMm*mn)2n\n%on n(n6n8oOo'jooo+oo p*pRp$p"$qGqWq2uqqqq.q r(3r\r<yr:r*r s*=s hs6ss0s) t@3ttt|ttttCt=uXuvu u&u@uvB#vfv0}v7v0v2wJw:gwZww5z>{Q{i{q{{3{{){|:|)U|,|G|@|5}5L}+}+}:}Q~1g~3~*~6~0/B`*2?IAB;΀< 1G=y.121K:}<83.0b#!(ك!$$CI=^˄M*4xŅF*<U-gGE݆F# jw%ч*Qmh+ֈ#1&X8x+'݉#$)NlE"B)0l>>܋-I2i%6ŒCC=C*+*:ez9J2!H j(Hȏ)&;%b62ܐ=:M,=ϑ ")"Lo(!"֒23,`+EɓF"Vy Δ#@\v/"•!<*V%! ɖ18Ml]%l"&ܘ &%@'f#0C/'/W++0ߚJ*[ ܛ($&K7i/*ќM*Ju*ڝ=4JK;>Ҟ<UN9>ޟP+n3PΠ5+U/-3ߡ0ADZ*& D3ExD<R@]F78)p| oɦ9,O|-٧\:I=t¨W7SXc<\.0>_>4ݫBNU->Ҭ/+,[("ѭ%4FdH|(Ů&>-T6+CA)Fk<˰B0K<|6Y dsA$7.\-г,1޴,Ic:z $ٸ)Gfy%ѹ$2Mem*Ӻ+#*N|f4 18 jCϿ`kL$UXR%2=5B7x'1, #7[u/(!"9D\M#/ C>P')3&Kr0%&O> $!:8Q!"777?*w=*$!#FMjA&0!R i(0?6$2[%++! [.*(*B 3L"+*#/N-j 67(.;/j51< ?"L3o -% :OfiL[^y./)7&a-!0( 2M=2?0rcH2P#&&#).X'o$ ?>B\B-1.Bq!7Lf*=st\;3 >A9+!&/FN]$II7e%! -5>t#/ )<Y _&iS0'?Qg%#<"M_;:/W;12/FAv?@698p:v[$t5('!(I r%!' (C5[!!*">a|(@4 uNJ<O1- (.UW 2#%#9']0C(0UY%  ' Hi<%  )>'U,}&)P]L& $2AW($',2T-13.Jd1}3(F5V724:,g-oD0Gm[W\!2~1-) ;'E%m(-)2&N5u'2"G)*q! 1'>9xG4=)r5H2 CP_To+$&'<8d4"Z+1**8*c.      ): *d M 2 F W !w   3 ) 8 #S w - )  ,  1  ? +` ,  & ' /%U#k+=,&&:awd$09/j3; ##JG&0#*9 HNT:7HrI@9<)XF &+*)V(wM~@B (P(y& A Lj(0CDAS0* UUsV1 I ,i / % ! #!#2! V!Fw!2!0!5""QX"P"C"?# S#t# ##S#Z'$+$6$6$1%N%n%3%>#&Vb&`&Z'#u'r'5 (?B(F(4($()#)AM)))")))<*X*(s*1*&*$*$+V?+++ +1+6,/P,,1-KC-)-1---3.3M.3.*.U.T6/.//T/.0'C03k090)01!1U=1"1&1012,$2MQ22*22:2732V3(33334"4>4Z4[p464A5eE5h5R6-g6>6!6+6$"7"G7,j7(77;7&8%:8'`8 8.888)8)93A9;u9(999:/:0E:1v::1:(:(#;L;$k;;;+;; <'%<M<"d<.<G<<=-=&F=m=====(=. >?8>$x>+>->!>?+.?)Z????8F@?@@@-@ A$AAfA!zAA%AA"A2B3EB7yB6B5B?C^C)}CC#C2CD.*DYD6yDRDQE(UE~E>E,E EEFaFF*G@qG GGNG>HUHQpH5H H:ITIfI~III1IRI1IJ-{J.J4J! K /K*=KhK K'K#K5K4)L<^L;L&LLM-2M/`M MM%M'MNSN!qNRNNN2OHO$hO2O&O(O(P9PNPVPjP PPPgP,7QdQ~RS +U6VSV6sV.V$V V2 W&=WdW~WVW2W:!X1\XXXUX&Y'AYiY&Y7YY1Y"0Z#SZ$wZVZZ [([@['[[$[f[\c#\\$\\3\"]*8]c]]]]]]0].^H^b^y^^#^^^/2_.b_#_b_`4``Va+Xa a+aaBadid|#esfggsghhgiwUj\j,*kWm]-o?ooUKp>pepFqpqKrrys?s;t>uO@uiuuv6v Uv!vvv!wdw"xj:xZ!PJ%* !^Zv6|YVp0d"O StQ5H8WF_:I~ DC/: QNmaC=itbL(<${S#sry-|'#(v+qS>ItO/\bTMI+} Bu+{ 0@Xmcno89Pi+U8[Em/qLTRRN=53125|4H\ 7b}b Q-}.yD^3)>JK}+#0'.-6D:5rnAf<1<'GM&`I& mO224(uh;9~Z73FS3fr%6b9 xj DQyNxuTBi.=%.,'6pke.Oe_vJA4,^]\@9`>W*$1zB=dpG-*"q;<[&el"E p^ |1&( @:U]H);w= z|?kU1v,D 9J5~gj@*dG*5ahsF2XCKg0kEzM!jZYVq[B/@){r@M*[jGlwK iM?)Xg x<&8U>.1P")ygA Yx'BP?o0"E#N4\]aU`87+Dc2 o??l fnZef)"Y{I7Va %h,{\iNu:` &Wm^3(u}TScL#CfR84t2 Hhcv  4:] PzG]%X$wz_,;> j_6(!V;KL07HF=J,$q%weBK_osAr LHRYCV `n~'s-EXc EldWC$Aks/3 Gy$F?>d#F w</oWgpx~6AIQJ;TkhltO [9a-!Rn7!   --- Changelist '%s': ------- Committed new rev %ld (loaded from original rev %ld) >>> ------- Committed revision %ld >>> Committed revision %ld. Error: no prefixes supplied. Fetching external item into '%s' Performing status on external item at '%s' Recovery completed. Valid options: Warning: %s * adding path : %s ... * deleting path : %s ... * editing path : %s ... * replacing path : %s ... %ld => (dropped) - handles '%s' scheme (from %s:%ld) - The certificate has an unknown error. - The certificate has expired. - The certificate hostname does not match. - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! - The certificate is not yet valid. done. "%s": unknown command. %s (revision %ld)%s (working copy)%s of '%s'%s, version %s compiled %s, %s %s: (Not a valid URL) %s: (Not a versioned resource) %sProperty changes on: %s%s%swarning: %s '%s' is not the same repository as '%s''%s' already exists'%s' already exists and is in the way'%s' already exists and is not a directory'%s' does not appear to be a URL'%s' does not appear to be a working copy path'%s' does not define '%s()''%s' does not exist'%s' does not exist in revision %ld'%s' exists and is non-empty'%s' exists and is not a directory'%s' has an unrecognized node kind'%s' has local modifications'%s' has lock token, but no lock owner'%s' has no URL'%s' has no ancestry information'%s' in revision %ld is an unrelated object'%s' is a URL when it should be a path '%s' is a URL, but URLs cannot be commit targets'%s' is a URL, probably should be a path'%s' is a reserved name and cannot be imported'%s' is a wcprop, thus not accessible to clients'%s' is already a working copy for a different URL'%s' is already under version control'%s' is an URL when it should be a path'%s' is in the way of the resource actually under version control'%s' is marked as absent, so it cannot be scheduled for addition'%s' is neither a file nor a directory name'%s' is not a directory'%s' is not a directory in filesystem '%s''%s' is not a file'%s' is not a file in filesystem '%s''%s' is not a file or directory'%s' is not a valid EOL value'%s' is not a valid Subversion property name'%s' is not a valid administrative directory name'%s' is not a working copy'%s' is not a working copy directory'%s' is not locked'%s' is not locked in the repository'%s' is not locked in this working copy'%s' is not the root of the repository'%s' is not under version control'%s' is not under version control and is not part of the commit, yet its child '%s' is part of the commit'%s' is scheduled for addition within unversioned parent'%s' isn't in the same repository as '%s''%s' locked by user '%s'. '%s' not found'%s' not found in filesystem'%s' not versioned, and not exported '%s' path not found'%s' refers to a directory'%s' returned %d'%s' to '%s' is not a valid relocation'%s' unlocked. '%s' was not found in the repository at revision %ld'%s' was not present on the resource'--new' option only valid with '--old' option'DAV:baseline-collection' was not present on the baseline resource'get-file-revs' REPORT not implemented'get-file-revs' not implemented'get-locations' REPORT not implemented'get-locations' not implemented'incremental' option only valid in XML mode'stat' not implemented'verbose' option invalid in XML mode(R)eject or accept (t)emporarily? (R)eject, accept (t)emporarily or accept (p)ermanently? (local)(no author)(no date)* Dumped revision %ld. * Verified revision %ld. --This line, and those below, will be ignored----auto-props and --no-auto-props are mutually exclusive.merge-left.r%ld.merge-right.r%ld.working; run 'svn update' to complete it<<< Started new transaction, based on original revision %ld is missing ancestryA MERGE response for '%s' is not a child of the destination ('%s')A checksum mismatch occurredA conflict in the working copy obstructs the current operationA log message was given where none was necessaryA path under version control is needed for this operationA report cannot be generated because no data was suppliedA repository hook failedA representation vanished or changed between readsA working copy merge source needs an explicit revisionARG (some commands also take ARG1:ARG2 range) A revision argument can be one of: NUMBER revision number '{' DATE '}' revision at start of the date 'HEAD' latest in repository 'BASE' base rev of item's working copy 'COMMITTED' last commit at or before BASE 'PREV' revision just before COMMITTEDAborting commit: '%s' remains in conflictAccess scheme mixtures not yet supported ('%s' and '%s')Activity not foundAddedAdding %s Adding (bin) %s All authentication providers exhaustedApache got a malformed URIApache has no path to an SVN filesystemApply-textdelta already activeApply-textdelta not activeAre all the targets part of the same working copy?Argument to --limit must be positiveAt least one property change failed; repository is unchangedAt least one revision must be non-local for a pegged diffAt revision %ld. Attempt to change immutable filesystem nodeAttempt to deltify '%s' against itselfAttempt to pop empty WC unwind stackAttempt to remove or recreate fs root dirAttempt to set