GRASS logo

NAME

v.in.ogr - Convert OGR vector layers to GRASS vector map.

KEYWORDS

vector, import

SYNOPSIS

v.in.ogr
v.in.ogr help
v.in.ogr [-lfcztorew] [dsn=string] [output=name] [layer=string[,string,...]] [spatial=xmin,ymin,xmax,ymax[,xmin,ymin,xmax,ymax,...]] [where=sql_query] [min_area=float] [type=string[,string,...]] [snap=float] [location=string] [cnames=string[,string,...]] [--overwrite] [--verbose] [--quiet]

Flags:

-l
List available layers in data source and exit
-f
List supported formats and exit
-c
Do not clean polygons (not recommended)
-z
Create 3D output
-t
Do not create attribute table
-o
Override dataset projection (use location's projection)
-r
Limit import to the current region
-e
Extend location extents based on new dataset
-w
Change column names to lowercase characters
--overwrite
Allow output files to overwrite existing files
--verbose
Verbose module output
--quiet
Quiet module output

Parameters:

dsn=string
OGR datasource name
Examples:
ESRI Shapefile: directory containing shapefiles
MapInfo File: directory containing mapinfo files
output=name
Name for output vector map
layer=string[,string,...]
OGR layer name. If not given, all available layers are imported
Examples:
ESRI Shapefile: shapefile name
MapInfo File: mapinfo file name
spatial=xmin,ymin,xmax,ymax[,xmin,ymin,xmax,ymax,...]
Import subregion only
Format: xmin,ymin,xmax,ymax - usually W,S,E,N
where=sql_query
WHERE conditions of SQL statement without 'where' keyword
Example: income < 1000 and inhab >= 10000
min_area=float
Minimum size of area to be imported (square units)
Smaller areas and islands are ignored. Should be greater than snap^2
Default: 0.0001
type=string[,string,...]
Type
Optionally change default input type
Options: point,line,boundary,centroid
Default:
point: import area centroids as points
line: import area boundaries as lines
boundary: import lines as area boundaries
centroid: import points as centroids
snap=float
Snapping threshold for boundaries
'-1' for no snap
Default: -1
location=string
Name for new location to create
cnames=string[,string,...]
List of column names to be used instead of original names, first is used for category column

DESCRIPTION

v.in.ogr converts OGR vectors to GRASS. OGR (Simple Features Library) is part of the GDAL library, so you need to install GDAL to use v.in.ogr.

If the layer parameter is not given, all available layers are imported.

The optional spatial parameter defines spatial query extents. This parameter allows the user to restrict the region to a spatial subset while importing the data. All vector features completely or partially falling into this rectangle subregion are imported. The -r current region flag is identical, but uses the current region settings as the spatial bounds (see g.region).

Topology cleaning on areas is automatically performed, but may fail in special cases (then use v.clean).

Supported OGR Vector Formats

ESRI Shapefile
Mapinfo File

Further available drivers such as UK .NTF, SDTS, TIGER, IHO S-57 (ENC), DGN, GML, AVCBin, REC, Memory, OGDI, and PostgreSQL depend on the local installation (OGR library), for details see OGR web site.

Location Creation

v.in.ogr attempts to preserve projection information when importing datasets if the source format includes projection information, and if the OGR driver supports it. If the projection of the source dataset does not match the projection of the current location v.in.ogr will report an error message ("Projection of dataset does not appear to match current location") and then report the PROJ_INFO parameters of the source dataset.

If the user wishes to ignore the difference between the apparent coordinate system of the source data and the current location, they may pass the -o flag to override the projection check.

If the user wishes to import the data with the full projection definition, it is possible to have v.in.ogr automatically create a new location based on the projection and extents of the file being read. This is accomplished by passing the name to be used for the new location via the location parameter. Upon completion of the command, a new location will have been created (with only a PERMANENT mapset), and the vector map will have been imported with the indicated output name into the PERMANENT mapset.

EXAMPLES

The command imports various vector formats:

Support of database schema:

For schema support, first set a default schema with db.connect. If schema support is used the schema name must be specified whenever a db.* module is called.

Example:

db.connect driver=pg database=test schema=user1 group=group1
db.login driver=pg database=test user=user1 password=pwd1
v.in.ogr dsn=./ layer=river output=river     # -> table user1.river
db.select table=user1.river
The user can ignore schemas, if desired:
db.connect driver=pg database=test
db.login driver=pg database=test user=user1 password=pwd1
v.in.ogr dsn=./ layer=river output=river     # -> table public.river
db.select table=river

NOTES

The characters used for table column names are limited. Supported are:
[A-Za-z][A-Za-z0-9_]*
This means that SQL neither supports '.' (dots) nor '-' (minus) nor '#' in table column names. Also a table name must start with a character, not a number.
v.in.ogr converts '.', '-' and '#' to '_' (underscore) during import. The -w flag changes capital column names to lowercase characters as a convenience for SQL usage (lowercase column names avoid the need to quote them if the attribute table is stored in a SQL DBMS such as PostgreSQL). The cnames parameter is used to define new column names during import.

The DBF database specification limits column names to 10 characters. If the default DB is set to DBF and the input data contains longer column/field names, they will be truncated. If this results in multiple columns with the same name then v.in.ogr will produce an error. In this case you will either have to modify the input data or use v.in.ogr's cnames parameter to rename columns to something unique. (hint: copy and modify the list given with the error message). Alternatively, change the local DB with db.connect.

WARNINGS

If a message like "WARNING: Area size 1.3e-06, area not imported." appears, the min_area may be adjusted to a smaller value so that all areas are imported. Otherwise tiny areas are filtered out during import (useful to polish digitization errors or non-topological data).

ERROR MESSAGES

"ERROR: DBMI-DBF driver error: SQL parser error: syntax error, unexpected DESC, expecting NAME processing 'DESC'"
indicates that a column name corresponds to a reserved SQL word (here: 'DESC'). A different column name should be used. The cnames parameter can be used to assign different column names on the fly.

"ERROR: Projection of dataset does not appear to match the current location."
You need to create a location whose projection matches the data you wish to import. Try using location parameter to create a new location based upon the projection information in the file. If desired, you can then re-project it to another location with v.proj.

REFERENCES

OGR vector library
OGR vector library C API documentation

SEE ALSO

db.connect, v.clean, v.build.polylines, v.edit, v.external, v.in.db, v.in.e00, v.out.ogr,
PostGIS driver

AUTHOR

Radim Blazek, ITC-irst, Trento, Italy
Location and spatial extent support by Markus Neteler and Paul Kelly

Last changed: $Date: 2008-02-18 04:31:39 -0800 (Mon, 18 Feb 2008) $


Main index - vector index - Full index

© 2003-2008 GRASS Development Team