[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[nafex] Help in Sprouting Sweet Cherry Pits



I'm getting 20 lbs of sweet cherry pits from a processor in Ontario in a few
weeks.  These seeds are removed mechanically by a mechanical "pitter", and
not brined or treated in any way, so they should be good.  I'll be planting
these pits like corn at very, very close spacing, say 100 or more seeds to a
square foot, ie about one inch apart.

My objective is to get a sweet cherry seedling that survives zone 3 and
produces.  I assume at best one in four pits will sprout, and of those,
perhaps one in a thousand of the sprouted plants will survive above the snow
in a zone 3 winter.  I hope to get a very small number of hardy trees down
the line, and just maybe, a sweet cherry of reasonable quality that is hardy
in zone 3.

My question to NAFEXERs is about the successful sprouting of sweet cherry
pits, which I understand can be very difficult at times.  Any methods that
have worked well?  Most methods seem to revolve around cracking the pit and
planting in the fall.  However, cracking thousands of pits with a pair of
pliars doesn't appeal much to me...Does anyone have a method that works well
for getting sweet cherry pits to sprout in reasonable numbers?
Bernie Nikolai
Edmonton, Alberta


------------------------------------------------------------------------
Get a NextCard Visa, in 30 seconds!
1. Fill in the brief application
2. Receive approval decision within 30 seconds
3. Get rates as low as 2.9% Intro or 9.9% Fixed APR
http://click.egroups.com/1/6631/0/_/423498/_/963551665/
------------------------------------------------------------------------